Won't Automatically Move Messages from Group

Hey Folks,
Poked around for a bit in the archive and didn't see this issue addressed (most filtering queries seemed to be about Junk, this concerns mail from recognized recipients). After an hour with AppleCare they sent me here to answer this query:
I've written several rules for filtering mail from recognized senders to folders on my .Mac account. I can successfully get messages from single individuals moved automatically to a designated folder, but I can't get any messages from any e-mail addresses moved automatically where the rule applies to more than one e-mail address. In the case of a rule set to apply to multiple addresses, all those e-mails go directly to my inbox (i.e. the rule fails, or doesn't apply). Or to put it another way, I can write a rule that says: "move messages from Gary to Folder:Gary" and messages from Gary will go directly to that folder, skipping my inbox. However, if the rule says "move messages from Groucho, Harpo and Zeppo to Folder:Marx_Brothers" e-mails from either Groucho, Harpo or Zeppo will not move to that folder, but will simply appear in my inbox.
I won't list the things I've tried, both on my own and with the AppleCare tech, as its kind of a long list.
Anyone having or had a similar problem with rules applying to multiple e-mails.
Thanks very much,
Dillon

not quite the same:
to comply with your suggestion, I used the '+' feature and added each e-mail in its own field. That worked- it sent every e-mail entered in that rule to one box.
My question is whether there is a way to write the rule so I can copy and paste, from a list of 20+ addresses, every e-mail I want moved to that box into one field, as opposed to a separate field for each address. I'm just trying to save time as I sort through a lot of e-mail.
Thanks again,
Dillon

Similar Messages

How to automatically move messages from an IMAP folder to a local folder?

I have rules set up on my IMAP server to filter messages to various folders. While these folders do show up in Mail.app, they're listed under the accounts, which, for me, is off the screen. Is there some way I can have these messages automatically moved into a local folder? The built-in rules don't seem to work, as they appear to only apply to messages arriving in an Inbox.
Having to manually move messages is getting old real fast.

I think this does what you want. You'll need to create the local mailbox first and change the xxx's to your account identifier:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;">
tell application "Mail"
set messageList to (messages of mailbox "Dump" of account "[email protected]" of application "Mail")
move messageList to mailbox "DUMP_Local"
end tell </pre>

Getting mail to automatically move messages out of inbox

Hi,
I'm not that great at keeping my inbox organised and I wondered if there is a way to get Mail to automatically move messages from my inbox to another folder when they are over a certain number of days old? I've tried rules, but learnt that doesn't work because it only applies to incoming messages, a smart mail box but that does move the messages but collects them. I also tried to do an automator workflow but can't find an action to move messages?
I'm not tech-savy enough to start writing scripts and I wondered if anyone knew of a simple solution.
I'm using mail v4.5 and OSX 10.6.8
Many thanks
James

Hi Uri,
I think it's not possible using standard XI mail adapter (settings do not provide any filtering options), and I'm even not sure POP3 or IMAP allow you to pull specific msgs according to selection criterias (I may be wrong) ... So if one of this protocol allows it, I think you'll have to go for a custom mail adapter that will fulfill your need !
Otherwise (and this is what we've done), you can pull all msgs, route them according to its attributes (sender, subject, recipient) to the corresponding targets and when XI is not able to deal with some msgs, ignore them (in the rcv determination, select the corresponding option so no error is raised when recv det does not succeed) ...
Rgds
Chris

Automatically move mail from inbox after reply

I want to have rule that automatically moves email from my Inbox to a folder On my Mac after I reply to a message. This functionality is built into Smart Mailboxes but those won't actually move the email anywhere. Can this be done or is their a plugin/script out there perhaps?

rules only apply to incoming messages and won't work here. I don't think what you want is possible at all. any script you write would have to be manually activated after you reply to a message.

Failure to move messages from one account to another

I have recently started having problems when trying to move messages from one account to another. I get a message that says: The IMAP command "APPEND" (to INBOX) failed with server error: message contains NUL characters.
I have tried shutting down and restarting, repaired permissions. Not sure what to do next. Any help?

Ernie,
One is POP thru Cox Comm and the other is mobile me (the old .mac accts). Why would all of a sudden there be an issue when I several times during the day have been able to move messages from Cox to mobile me?

Is there a way to automatically move mail from one folder to another?

Is there a way to periodically, automatically, move mail from one folder to another?
For example, I'd like to move mail from one of my IMAP/Archives folders to my MyMac/Archive folder and I'd like this to happen without intervention.
Can this be done?

I'll try to be more specific.
When I'm done with an email, I archive it.
Because I have multiple email accounts, this results in emails in multiple Archive folders (one per account).
I'd like to have these automatically all moved into one (on my Mac).

ESS EP4 Stop automatic move up from Waitlist when Learner Cancels on ESS

Dear Gurus,
Hope you can help in finding a solution:
to stop an automatic move up of a learner on waiting-list when another Learner Cancels Classroom Participation on ESS.
On our IMG: Training and Event Management -> Sap Learning Solution -> Training Management ->
              -> Day-to-Day Activities -> Participation Cancellation -> Control Options
the config is set to value SEMIN u2013 ToPMD = u201CIu201D., which means "Interactive. User Selects."
In the BackEnd, the system behaves as expected, which is - Upon Participantu2019s cancellation by an Administrator, the Administrator gets an interactive choice of whom on Waitlist to move up to the Classroom Course.
However, when a Learner Cancels classroom course on ESS, a person from Waitlist is moved up automatically. This is not what we expect and this has changed after EP4 upgrade.
Prior to EP4 upgrade a Learneru2019s cancellation on ESS (approved by Learneru2019s manager) would result in Displaying on u201CDynamic Course Menuu201D or u201CDynamic Participation Menuu201D transaction:
- An Available spot plus unchanged number on Waitlist. Thus, the Administrator had a chance to move a participant of the highest priority.
Since the Administrator must consider various priorities upon making decision who should move up to the available spot, it is important for us not to fill it up automatically.
Is it a bug, or for ESS, may be there is a separate IMG control to keep behavior as it was prior to EP4 implementation?
I appreciate your help,
Thanks and regards,
Grace

Feb 14, 2012.
Dear Siddarath,
In SE16 I can see T77S0- HRLSO = space.
Where can I add the parameter HRLSO NMOVE in table T77S0? I do not see it on my IMG.
I already have:
1. IMG config UPON COURSE Cancellation
    IMG: Training and Event Management -> Sap Learning Solution -> Training Management ->
              -> Recurring Activities -> Firmly Bookin/ Cancellation -> Control Options
      SEMIN-FIXRV = 1 (Switch ON). (Conversion of Unplaced Candidates to Prebookings).
I think this works well.
2. IMG config UPON PARTICIPANT Cancellation
    IMG: Training and Event Management -> Sap Learning Solution -> Training Management ->
              -> Day-to-Day Activities -> Participation Cancellation -> Control Options
I can control here T77S0 parameters:
PPREL u2013 STORA = A040, ( Was cancelled by)
SEMIN-CCDEL = 0 , ( Default Value for Cancellations Fee)
SEMIN-TOPMD = I. (Interactive User Selects).
This one works well in the SAP Backend, but not on Portal ESS.
My issue is that, when Administrator Cancels a participant, there is now automatic move-up from waiting-list. The administrator can CHOOSE, whom to move up from waiting-list.
However, when a Learner Cancels participation HIMSELF on ESS portal, then any person is automatically moved up from waiting-list WITHOUT giving a chance to Administrator to choose who should me moved up. This worked OK in EP600, but does not in EP604.
Thanks again,
Grace

My iPhone 4S won't load email messages from my local carrier. It works sometimes and then won't. The local carrier says it is not them and to contact apple. Been happening since got Kindle Fire. Could this be doing it?

My iphone 4S won't load email messages from my local carrier on a regular basis. It says cannot get mail in use on another device. I thought everything was to sync together? Local carrier tells me it is Apple not them. It's been happening since I got my Kindle Fire about a month ago. Any ideas how to make everything work together????? Does it when kindle is off to sometimes. Thanks.

Hi Maquillage,
Thanks for using Apple Support Communities. I would recommend troubleshooting the iPhone by following the instructions in this article:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Cheers,
- Ari

Move messages from 5800 to C6-01

Hey, as the title says is it possible to some how to move messages from one phone to another. (Nokia 5800 to C6-01)
Tried it with create a backup from 5800 and then restore to C6-01 but only part of messages were moved.
If anyone knows any other ideas, i would be very grtafeul.

Not sure if the Phone Switch will transfer the Messages as well ... but what you may try is 'Sync' all your Messages on Nokia 5800 with the Nokia Suite.. Then connect the Nokia C6-01 and select Inbox in Nokia Suite-->Messaging..then select all messages in the Middle column and Drag-and-Drop them in the Inbox of the Phone (next to the phone icon at the bottom) .. Similarly select messages in Sent folder and Drag-and-Drop them in the Sent folder of the phone ...

Move messages from phone to memory card

How to move messages from phone memory to memory card in the 5800 XM?
Thanks

It is not possible to move messages to the memory card.

How to move messages from Phone to Memory card?

Hi, can anyone tell how to move message from phone memory to Memory card. Everytime, i'm connecting to PC, thn it is being changed to phone memory. Cant PC suite synchronize it with memory card messages folder. Please help. By the way, my phone is Nokia X6, if someone can help me, it would be gr8.
Regards,
Jimmy.

I can mark all the messages, but the option to copy them to phone memory does not appear! I'm using the lastest firmware for my Nokia 5800.

HT201320 Have an 'other' email set up on iPhone 4s; cannot delete or move messages from inbox. Help?

Have an 'other' email set up on iPhone 4s; cannot delete or move messages from inbox. Help?

Try resetting the iPhone,
Reset your iPhone by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPhone will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
If the does not work then delete that email account and set it up again,
Settings > Mail > select the account > delete account.
Take a note of the account settings before doing this to help you set it up again.

Move messages from server

Does anyone know how to move messages from the server to the local machine?
This is an IMAP account hosted at pair.com and I am over my allotment. Thanks.

Michael Spencer wrote:
Does anyone know how to move messages from the server to the local machine?
You would start by clicking on the "plus" sign at the bottom of the list of mailboxes and choosing "New Mailbox" with the choice of "On My Mac". Then drag messages from server mailboxes to the new mailbox. If those messages also remain on the server, you'll have to delete them from that mailbox.

Is there any tools for move messages from errorqueues in WLS 8.1.5?

Hello!
          I have created a JMSDestination (MyQueue) in my wls 8.1.5.
          I have also created an other JMSDestination (MyErrorQueue) in my wls 8.1.5.
          In the wls it is possible to specify an "Error Destination:" for a JMSDestination. In my wls I have specified MyErrorQueue as error destination for MyQueue.
          If anything goes wrong during consuming message from MyQueue the message will be moved to the error destination MyErrorQueue.
          If this situation ever occur, for eg. there is a cable connection loss or something. The error destination will save me alot of trouble.
          Very nice!
          But now I wonder if there is any tool or function i wls 8.1.5 that helps me move the message back to MyQueue from the error destination, MyErrorQueue, when the problem is solved.? For eg, when the broken cable is replaced.
          Or do I have to write such a application my self? Seems strange since the concept of error destination exists.
          Best regards
          Fredrik

Have a look at this
          http://www.hermesjms.com/confluence/display/HJMS/Home
          We use it and it works very well for handling messages on error queues.
          Some messages we automatically re-queue using a modified version of this
          code here
          https://codesamples.projects.dev2dev.bea.com/servlets/Scarab/remcurreport/true/template/ViewIssue.vm/id/S134/eventsubmit_dosetissueview/foo/resultpos/1/nbrresults/285/action/ViewIssue/tab/2/readonly/true
          Hope that helps.
          Pete
          Fredrik Andersson wrote:
          > Hello!
          >
          > I have created a JMSDestination (MyQueue) in my wls 8.1.5.
          > I have also created an other JMSDestination (MyErrorQueue) in my wls 8.1.5.
          >
          > In the wls it is possible to specify an "Error Destination:" for a JMSDestination. In my wls I have specified MyErrorQueue as error destination for MyQueue.
          >
          > If anything goes wrong during consuming message from MyQueue the message will be moved to the error destination MyErrorQueue.
          >
          > If this situation ever occur, for eg. there is a cable connection loss or something. The error destination will save me alot of trouble.
          >
          > Very nice!
          >
          > But now I wonder if there is any tool or function i wls 8.1.5 that helps me move the message back to MyQueue from the error destination, MyErrorQueue, when the problem is solved.? For eg, when the broken cable is replaced.
          >
          > Or do I have to write such a application my self? Seems strange since the concept of error destination exists.
          >
          > Best regards
          > Fredrik

I'm trying to move messages from Mozilla to Thunderbird as Mozilla is no longer compatible with 10.7

I don't know how to move my messages from Mozilla to Thunderbird.

Mozilla what? as there is Mozilla Firefox, Mozilla Thunderbird and the ancient Mozilla 1.7.x suite along with other Mozilla products and projects.
If you are referring to the Mozilla suite then perhaps look at SeaMonkey which is a community effort in keeping the suite going. http://www.seamonkey-project.org/

Won't Automatically Move Messages from Group

Similar Messages

Maybe you are looking for