Work Book Hierarchy Node

Hi All,
I have created a workbook from one of the existing query.
The report rows had a hierarchy node on it.
when i try to expand the hierarchy the Triangle symbol is changing to ___ straight line. How to change that line back to Triangle symbol.
Can some one help me.
Thanks
Rama

problem solved

Similar Messages

Customer Exit variable on Hierarchy Node

Hello Experts
I am in the process of creating a Customer Exit variable on a Hierarchy node. This will be populated at run time based on the value of a Characteristic variable.
The Hierarchy is activated and included in the roes of the report. I would like the end result to be exactly the same as it would if I had manually entered a variable in Hierarchy node variable
I have written exits before for Characteristic variables, however, I am unable to get this to work for Hierarchy Node variables. Please find below the code I have prepared so far. I follow the approach of creating a seperate executable program for each Customer Exit variable. This Program will be called by the Exit.
DATA: l_s_range TYPE rrrangesid.
DATA:l_s_var_range TYPE rrrangeexit.
FIELD-SYMBOLS : <fs_var_range> TYPE rrrangeexit.
IF i_step = 2.
    READ TABLE i_t_var_range
    ASSIGNING <fs_var_range>
    WITH KEY vnam = 'ZMO_WBS_LVL2'. " Characteristic variable
    IF sy-subrc = 0.
      l_s_range-low = <fs_var_range>-low.
     l_s_range-high = '0HIER_NODE'.*
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      APPEND l_s_range TO e_t_range.
    endif.
endif.
I would be obliged if anyone can help me understand what is being overlooked. The Query is presently returning "No Applicable data found"
Thanks in advance
Regards
Zubin Kurian

Hello
I have made the changes. Please refer the Code below for reference. This code will function display only those Nodes at and below the WBS element(s) that were entered into the variable ZMM_WBS_ELEMT
IF i_step = 2.
SORT i_t_var_range BY VNAM.
    LOOP AT i_t_var_range ASSIGNING <fs_var_range>
         WHERE
              VNAM = 'ZMM_WBS_ELEMT'. " Multiple Value, & Mandatory
       IF <fs_var_range> IS ASSIGNED.
         CLEAR: l_s_range.
            l_s_range-low = <fs_var_range>-low.
            l_s_range-high = '0WBS_ELEMT'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'BT'.
            APPEND l_s_range TO e_t_range.
            ZVAR_COUNT = 1.
       ENDIF.
    ENDLOOP.
Edited by: Zubin Kurian on May 10, 2011 4:38 PM

Hierarchy Node Variable search (find) option not working

Hi Experts - I have created a hierarchy node varibale on a fixed hierarchy. When user run the report and click on hierarchy node variable selection option , A new window will pop up which has all the nodes.
As the list is quite big and has many levels , On the same pop up , we have find option , when we enter any node in the find box , its always give a ABAP Dump , It never works for me...
Is node find/search in not working in Bi 7.0 .
Thanks
R

Hi Rohan,
We can restrict the hierchey level at property of of the hiearchey enabled characteristic.
Hope this hels...let me know if u require any further info on this..
Best Regards,
Maruthi

Hierarchy Node Variable not working

Hello,
I created two variable one being Hierarchy Node variable and other Hierarchy variable.
I am using this for the Internal order hierarchy.
I amd also working on 2004s and not 3.5 version.
I restricted the Internal order and then selected the variable and then selected the nodes and before moving the Nodes variable, I also selected the Variable for the Hierarchy and then moved the Node variable to the right screen.
When I run the report, the option for the selecting the Hierarchy appears and I selected the correct Hierarchy, but when I go to the Hierarchy Node variable, I do not see the Nodes for that Hierarchy I selected in the first variable and it always like a fixed value Hierarchy defaults to the first Hierarchy. Hence I am unable to select the node to execute the report.
I would appreciate any ones feedback.
Thanks
Sundar

I am working in 2004s as well (SP11) and I am trying to do the same type of thing.
I have multiple cost center hieriarchies that the user can choose from at run-time using the hierachy variable.
Then once the user chooses to the hierarchy they then should go choose a specific node that they want to run for in that hierarchy using the Cost Center Hierarchy Node variable (using the hierarchy variable, not fixed hierarchy).
When I run this in the web I am allowed to choose one of the multiple cost center hierarchies... this means that the hierarchy variable is working, however when i go to choose the specific cost center node for that hierarchy it uses the defult cost center hierarchy instead of the one selected in the selection screen.
If anyone can shed some light on this it would be greatly appreciated.
Aaron

Hierarchy node variable in workbook

Hi all,
I am scheduling a workbook in precal,
The work has nine queries with same hierarchy node variable in all teh query selection.
The work book is taking long time in opening even when auto refresh is off.
the precalculation takes 30000 sec and running...
any thought on what can be done to reduce the calculation.
regards,
Rakesh.

Hi,
As precalculation just automates the process of opening, refreshing and applying the variant on a workbook I would suggest trying to find improvements there. Perhaps the notes below can help.
1289127
1160093
1179647
1260213
also use the latest precalc server support pack "BW 7.x precalculation service SP1200 - GUI 7.10" (note 1387291).
Thanks,
Michael

How to filter hierarchy node in BEX query designer

Dear experts
We are working on FI balance sheet with hierarchy infoobject 0GLACCEXT. Example of our balance sheet is as follow:
Parent Node A = 20
     Sub-parent Node A1 = 10
         Leaf A11 = 5
             Leaf A12 = 5
Parent Node B = 20
     Sub-parent Node B1 = 10
               Leaf B11 = 5
               Leaf B12 = 5
We require only:
    Sub-parent Node A1 = 10
    Leaf B12 = 5
So I filter those out in BEX restriction; however, after we examine the report in tcode RSRT, "Sub-parent Node A1" is not shown in BEX Report, and the result is as follow：
Parent Node B = 5
     Sub-parent Node B1 = 5
             Leaf B12 = 5
Are there solutions for us to show merely A1 and B12 ?

Hi Chu
Try the following steps.
Initial Output
In this example I will restrict the query for only displaying Node 8603 and leaf 9000
Proceed to restrict the Characteristic. Please be aware of the difference between hierarchy nodes and leaf characteristic values. Also set the Hierarchy display properties to expand up to level 1.
Execute the query again:
Please be aware that users will still be able to expand node 8603 and see the lower level nodes/leaf. In order to restrict users from doing this set up users authorizations.
Regards,
Carlos

How to pass a hierarchy node variable value over OpenDocument?

Hello,
I have been unable to link to an instance with matching parameters with opendocument with hierarchy node variables.
Has anyone attempted this or been successful?
Please reference this post I had in the Web Intelligence forum. sInstance=Param not working for sap bw query based reports (FWM 02020)
Here's some background information
We've created 2 new crystal reports based of sap queries.
Report 1, single prompt, no hierarchy.
Result : Can link to specific instance with matching parameters. Great!
Report 2, single prompt, hierarchy based.
Result: Cannot link to specific instance with matching parameters
Parameter list for report 2
[!V000001} : Cost Center/Gr{oup (Multiple) = {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
However when I go into the history and look at the successful instance parameters used, it seems to be picking up an extra parameter ( my guess is node)
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
We have attempted to use the entire string, the first portion, second portion, and just the technical response. No luck.
Any help or pointers would be appreciated!
Nick

Hello Ingo,
I'll explain the situation more clearly,
Report 2, single prompt, hierarchy based.
Result: Cannot link to specific instance with matching parameters with a response from the Bus Objects server
An error has occurred: The object with ID -1 does not exist in the CMS or you don't have the right to access it (FWM 02020)
We have 1 parameter for report 2
{!V000001} : Cost Center/Group (Multiple)
We selected a single value:
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
(The XXX, XXX, & XXX is the description)
We ran a successful instance.
However when I go into the history and look at the successful instance parameters used it displays the following:
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
An extra description seems to appear (The first XXX, XXX & XXX;) Our original selection was only {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
We attempted to build variations of the open document strings
1. We tried the entire parameter response,
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
2. The first description that was not part of the original selection,
XXX, XXX & XXX
3. The technical name and description
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
4. The technical name
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE}
Please let me know if you need more details.
Regards,
Nick

Exclude a hierarchy node by using exit variable (not in query designer)

Hi gurus!!
I have a hierarchy for the infoObject 0COSTELMNT. Depending on the user who executes the report, the node '0599ADJUSTMENTS' must be displayed or not.
I am trying to solve it by using an exit variable:
Varible Type: Hierarchy Node
Processing : Exit
On the exit, I have entered the following code:
      IF ( sy-subrc = 0 ).
          l_s_range-sign = 'E' .
          l_s_range-opt = 'EQ' .
          l_s_range-low = 'AJUSTES'.
          APPEND l_s_range TO e_t_range.
     ENDIF.
But unfortunately does no work!!
Any ideas?
Thanks in advance
Regards.
Carmen Rodríguez

Hi,
Check the below link gives good knowledge on variables:
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/579b3c494d8e15e10000000a114084/content.htm
Reg
Pra

Search Help for Hierarchy Node in SAP BW 7.3

Hi Experts,
We were previously using SAP BW 7.1 system and we had a table which used to be maintained through SM30 which has a customed search help on one of the fields for a hierarchy object. And it was working perfectly.
However, one of our systems have just been migrated into 7.3 version and the above functionality is no longer working.
This is what is happening now:
- User selects a hierarchy and after selection nothing is being displayed on field on the table.
We have tried to debug this customed search help in both environments to distinguish what is wrong. We have noted that a standard function module (RRSV_IOBJ_VALUE_OUTPUT) is not behaving similarly. In 7.1 system, the C_T_DATA table is being filled whereby in the 7.3 system, it is empty.
Do you think this is the issue?
Please do advise and propose what can be done to make it work. Or any idea on how to create a new search help for a hierarchy node in 7.3?
Thanks in advance.

hi,
one more thing i will like to add here is in BW 7.3 you get a new security admin feature that allows you to make mass changes to authorizations instead of one-by-one. This can be done by cut-and-paste in a worklist, hierarchy nodes, and you can also add users to multiple analysis authorizations.
The u2018newu2019 authorizations has both the data value and hierarchy restrictions. You can still build using the u201CRSECADMINu201D transaction
Also make sure that all objects are in the TLIBG library and they will be 'shielded' during the upgrade.
regards
laksh

Hierarchy node text shows short text instead of medium text in WebI report

Hi,
We have created a simple Hierarchy suing Tx RSH1.
US -> North Carolina
South Carolinakey
Rest of America
Please note "North Carolina" is the medium text for the node while the short text which can contain max of 10 chars is "North Caro"
We have used and activated the hierarchy within the BEx query. Text display with "Medium Text" has been enabled for the InfoObject. The display on the BW report is as expected showing the medium text for all levels and all modes.
When a universe is built on the query and a WebI report is created based on the universe everything works fine other than than the Hierarchy text for different levels and nodes. Instead of showing the Medium text, the short text is getting display.
We took out the text object from the Universe in the Universe designer and went ahead with the key and medium text, but that did not help.
Is this a known bug? Is there a workaround for this issue?
We are on XI 3.1 SP3.
Rgds

Hi,
I am working on BO XI 3.1 SP2.
I have displayed the medium text for the hierarchy nodes as:
In my universe three detail objects(key, medium name and long name) gets generated for each hierarchy node.
I have copied the definition of L01 Medium name (detail object) in the L01 dimension object. similarly for other hierarchy nodes.
i.e. L02, L03.. etc.
Now the master data which have been loaded for the medium name will be displayed.
Regards,
Rohit

Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

Hi Experts,
I am performing master data load through standard DM package with Filter selection as:
1. Chart of Accounts
2. Hieararchy selection has 4 hierarchy names
3. Selected Import Text nodes
4. Selected Set Filters by Attribute OR Hierarchies
I have run this DM package for a set of data and selections a week ago and it worked fine.
However when i run it now, it is giving issues,
It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
I am running the DM package in Update and have selection as External.
Any sugestions for checks / has anyone encountered this issue earlier?
Regards,
Shweta Salpe

Hi Guyz,
Thanks.
I found that the issue was with the transformation file where i was maintaining the RATETYPE.
When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
however now i do not have Ratetype populated in the system.
my rate type mapping is:
RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
and in conversion file i have TOSKIP *skip
I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
Regards,
Shweta Salpe

Hierarchy node Variable: F4 Help - Not showing Master data values

Hi,
We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
Thanks in advance for your help.
Regards,
Femmie.

Hi,
Could you please share the steps you have taken to fix the problem?
We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
Any help on this would be greatly appreciated.
Thanks,
Krish

Campaign creation : selecting a busines partner then hierarchy node

Hello
In MSA 4 SP8, while creating a Campaign, if I first select the Client Type as "Business Partner" then change to "Hierarchy Node", when I save it tells me that the Business Partner field is not correct, though I told it to choose the other option (which was correctly filled).
I believe it is the fact that the BP object persists, how can I force the system to ignore it if I don't need it ? (or, destroy it so it is not even checked)
Thanks and Regards,
François

I am working in 2004s as well (SP11) and I am trying to do the same type of thing.
I have multiple cost center hieriarchies that the user can choose from at run-time using the hierachy variable.
Then once the user chooses to the hierarchy they then should go choose a specific node that they want to run for in that hierarchy using the Cost Center Hierarchy Node variable (using the hierarchy variable, not fixed hierarchy).
When I run this in the web I am allowed to choose one of the multiple cost center hierarchies... this means that the hierarchy variable is working, however when i go to choose the specific cost center node for that hierarchy it uses the defult cost center hierarchy instead of the one selected in the selection screen.
If anyone can shed some light on this it would be greatly appreciated.
Aaron

Filter value on hierarchy node in Business Explorer Analyser

Hi experts,
I'm facing an issue in BI 70 SP 10.
I'm using Business Explorer release 3500.11.051.
In a query, when I set a filter value on a hierarchy node, all the hierarchy is available and i can choose my node.
Now, i want to change of filter value but only the previous selected node is available in the filter popup. I need to remove the filter value to choose a new one.
Need your help.
Jacques

HI,
The attribute is: Only Posted values for navigation.
We didn' t change that and it worked in 3.0B
Jacques

Calculations on hierarchy nodes

Hi,
We are developing Divisional P&L Report. We have created hierarchy in R/3 system for this and also loaded successfully in BW.
Now the problem is while designing the query, we have to do calcuation on Hierarchy nodes.
For e.g.
Sales
- W (Works)
- PD (Purchase items)
- Esc (Escallation)
Adjusted Turnover
- Change in stock
Now I want to do calculation for parent nodes (Sales + Adjusted Turnover). please guide me for the same.
Thanks & Regards,
Sameer Kulkarni

Hi Harpalsinh,
My FSV is in the Row and Key figures are in the coloumn.
Please tell me procedure or options for how to do addition of two parent nodes in query designer. I also have to apply allocation rules later on for the division.
For. e.g.
I have 1 parent node, below that i have 7 child nodes. Out of this I need to do addition of 2 child nodes and display it below these childs.Could you please suggest me how can i achieve this?
Also i am not able to see the grouping of hierarchy in Query designer please suggest on the same also.
Thanks & Regards,
Sameer Kulkarni

Work Book Hierarchy Node

Similar Messages

Maybe you are looking for