Work center and material
Hi Gurus,
is there a table that will give me work center, material that is being run at that work center, quantity and date ?
Thanks
Anusha
Hi,
You can use this FM 'COIS_SELECT_ORDER_DATA_READ':
CALL FUNCTION 'COIS_SELECT_ORDER_DATA_READ'
EXPORTING
iv_prod_order_sel = lv_prod_order_sel
iv_proc_order_sel = lv_proc_order_sel
iv_planned_order_sel = lv_planned_order_sel
iv_rem_objects_only_sel = lv_rem_objects_only_sel
is_objects_to_read = ls_objects_to_read
it_parameter = lt_parameter
it_status_hdr = lt_status_hdr
it_status_opr = lt_status_opr
it_status_cmp = lt_status_cmp
TABLES
ct_ioheader = lt_ioheader
ct_ioitem = lt_ioitem
ct_iodocl = lt_iodocl
ct_ioopdocl = lt_ioopdocl
ct_iomamo = lt_iomamo
ct_ioconf = lt_ioconf
ct_ioopconf = lt_ioopconf
ct_iosoconf = lt_iosoconf
ct_iogomo = lt_iogomo
ct_ioopgomo = lt_ioopgomo
ct_iosogomo = lt_iosogomo
ct_iogmer = lt_iogmer
ct_ioopgmer = lt_ioopgmer
ct_iosogmer = lt_iosogmer
ct_iosequen = lt_iosequen
ct_iooper = lt_iooper
ct_iosoper = lt_iosoper
ct_ioopcomp = lt_ioopcomp
ct_iooppreq = lt_iooppreq
ct_iosopreq = lt_iosopreq
ct_iooppord = lt_iooppord
ct_iosopord = lt_iosopord
ct_ioopmst = lt_ioopmst
ct_ioopprt = lt_ioopprt
ct_ioopcap = lt_ioopcap
ct_ioopscap = lt_ioopscap
ct_iosocap = lt_iosocap
ct_iososcap = lt_iososcap
ct_ioopsccf = lt_ioopsccf
ct_iososccf = lt_iososccf
ct_ioprodlist = lt_ioprodlist
ct_iomatver = lt_iomatver.
Give the selection for workcenter. Check the transactipon COOIS and fill up the lt_parameter table with the workcenter detail. It will give the detail.
Thanks and regards,
Pradip
Edited by: Pradip Ray on Aug 26, 2009 10:34 AM
Similar Messages
-
Work center in material determination of DIP profile
Hello,
the source of our DIP-Profile is 0001 Acutal costs - line items.
We have the requirement to use the work center in material determination as criteria.
But in DP90 we get material determination error.
The issue is that in the failed combination no work center is available.
Why can´t the DIP find the workcenter we used in the service confirmation?
Thank you
Kind regards
ManfredHello,
after above setting have tried this in ODP1
select The Work Center in Chr.then >select Source on left hand side ->Select the Actual cost Line Item>select Material determination-->Select Material for which Transfer Cost and Quantity -->Marked the Check Box Material determination and Individual
Also please let me know Which Control Key you are using in service order??????
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Sep 9, 2010 3:16 PM -
Cost Center, Work Center and Profit Center
Hi ALL,
Can any one please explain me the concept of Cost Center, Work Center and Profit Center.
And where and when do I assign the cost center???
AmitHi Check the following "
Cost centers represent areas of responsibility where costs are incurred or where responsibility for costs may be assigned. They represent the smallest unit of responsibility within the organizational structure of an enterprise.
A cost center can be pictured as a cost bucket such as a department, product line, production stage or geographical area.
An unlimited number of cost centers may be created.
All cost centers within on controlling area have to be assigned to a cost center hierarchy (standard hierarchy).
Costs originally posted to one cost center may be distributed and assessed to one or more other cost centers using allocations.
How are costs assigned/posted to a cost center?
External financial accounting documents created in FI, AM or MM that post to a G/L expense account can be configured to require a cost center assignment be entered at the time of transaction entry. The system automatically creates a parallel CO document that posts to the indicated cost center.
Cost elements master records can be configured to be posted to a certain cost center (automatic account assignment).
In addition, other non-financial activity (i.e., direct labor hours) may be posted directly to cost centers from within CO or via other modules such as PP or HR
chandra -
BAPI_FUNCLOC_CREATE : Main work center and plant associated
Hi,
I'm trying to create Functional locations using BAPI BAPI_FUNCLOC_CREATE. I got almost all the fields except 'MAIN WORK CENTER' and 'PLANT Associated with main work center'. Please advise me the relevant fields in the importing parameters of this BAPI so that I can upload the same.
Thanks:
GauravHi,
Thanks for your response. Actually after doing further R&D, I saw that work_ctr requires the object key of the work center. I fetched the OBJECTKEY from CRHD & passed. It automatically updated both work center & plant associated.
Awarding you points for your help.
Thanks buddy!!! -
Selection of technical objects by work center and plant
Hi there,
I want to select functional locations and equipments that are diretly linked to a workcenter which you can see in the location tab in the standard-transactions.
How can I select this data the way from work center (and plant) to the technical objects? Which tables I have to use??
Kind regards
JensTry using Function Module ITOB_FUNCLOC_READ_SINGLE.
-
Dear experts,
I face a problem that system get main work center from equipment master data as a default main work center in maintenance plan when creating maintenance plan. however, if main work center in equipment is changed later, the change will not synchronize to related maintenance plan. if work order is generated from maintenance plan, main work order in order is defaulted from maintenance plan instead of updated work center in equipment.
another problem is that, for those orders generated by maintenance plan, the work centers in operations is defaulted from task list in maintenance plan. in most case, work center in task list is dummy. Actually the work is done by work center in equipment master data.
My expectation is how to auto replace the main work center and work center of operations in work order with the one in equipment master data if order is generated by maintenance plan? is there any standard configuration or enhancement/BADi that can help with this requirement?
thanks!
WesleyWesley,
Sorry - development is the only way.
Another option is to create a batch program that runs before your IP30 run(s) and updates any maintenance items and task lists with the correct work centres.
PeteA -
Control Key in Work Center and Routing
Hi Gurus,
Can anybody tell me what is the difference between Control Key we are providing in second tab of work center and the control key we input in routing.
can i use same control keys at both the places.
Regards,
Anand.Hello,
Control Key in Defaut value keys screen is mainly for defining how the work center will be used in routings.
Almost in all the PP we define same Control key to the work center as well in the routing.
For example in work center control Key PP01 is used to define Routings/Internal proc. activities. When we go to the routing screen even if we do not see our components, work centers or control key we have to manually enter these details ans here control Key will remain the same as it was in Work center.
No. of individual capacity defines how many machines are there of the same type in the work center. E.g if I have 5 CNC machines then I will make One work center and in capacity screen I will put 5 as No. of individual Capacity.
Regards,
Piyush -
Link between work center and G/L Account
Hi All,
I need to link work center to the G/L account in PM Module . I know the link between work center and cost center . But would like to know how MO cost hits which cost element/ G/l account and there assignment
Thanks and Regards,
VivekHi check the below definitions
Cost centre : Organizational unit within a controlling area that represents a defined
location of cost incurrence.
Profit Centre: Organizational unit in Accounting that reflects a management-oriented
structure of the organization for the purpose of internal control.
Work Centre: An organizational unit that defines where and when an operation should
be carried out.
Regards
Sreeni -
How to retrieve work center from material document
Hello,
For a report I need to display all the backflushs for a work center. Therefore I read table MKPF and MSEG selection the correct mouvement code, and from here I need to find the production version in order to get the work center.
However I can not find this information in MKPF or MSEG. Material document is associated to a CO Production order but field AFPO-VERID is empty.
Can someone provide me the correct path to read table MKAL starting with MKPF/MSEG.
SAP version is ECC6 and we run repetitive manufacturing.
Thank you.Hi,
The FM L_TO_CREATE_SINGLE or L_TO_CREATE_MULTIPLE could solve your problem.
Hope it helps.
Chang -
System monitoring work center and CEN system
Hi everybody.
I'm setting up the central monitoring, using SSM as monitoring system. I'm also having a look at the work center for system monitoring; but I don't find how to link the central monitoring capabilities with this dashboard.
I mean, it looks the central monitoring does not provide any advantage to work with this work center, am I right? Anyone has experienced this?
Thanks for your answers!!
FermíHi!
I've done finished this issue!
Please follow steps below:
1. Create activity type in T-Code: KL01
2. Go to KP26 to create the realtionship between Cost Center and Activity.
Now you can see new activity in Costing tab.
Regards!
Woody. -
Connection between work center and ppome
Hi,
in the work center I defined the connection to a o-unit in ppome. Which table represents the connection between the org-management and the work center?
Thank you,
VanessaHi Roman,
thanks for your answer. I don't have evaluation path PPDM (and if it is a t-code I don't have the right to use it).
I have seen that there are different kinds of work center. I am talking about the one created with the cnr1 transaction.
Greetings -
Download notifications based on main work center and edit based on task level person responsible
Hi Experts,
My requirement is to download notifications based on main work center.The downloaded notifications contains task level person responsible.If the notification contains four task assigned to different persons.Let suppose one task is assigned to the mobile user and other three task to another user.Now the first mobile user should able to edit the task assigned to him ,but he should able to see all other task in disable mode that are assigned to other user.Iam using agentry work manager 5.3
Please help me to achieve this requirement as soon as possible.Thanks in advance.
Thanks & Regards,
Sravanthi Polu
Tags edited by: Michael ApplebyPlease refer my earlier posting for Work Order related requirement similar logic can be extended even to your Notification requirement.
Also refer.
Work Order and Notification Assignment Types Supported In Work Manager 5.3
Thanks
Manju -
Work Center and Quality Notification
Hi
Can any one help on linking Quality table (QMFE / QMEL) with work centre info from COOIS .
We have to get the work center from the above Tcode in to our quality data source. When I checked in this field and table it is derived from a structure (AFVGD - ARBPL). Is there any other place or table I can get this work centre data ? We need this in to Quality for control Key (AFVGD-STEUS) ZZ40 only.... Thanks in advance for the help!!!Hi ,
Please check in table CRHD
Also check this thread for more info
Table linking Routing and work center.
-Mayuri -
IW51-52 - Updating fields Main work center and Maintenance plant
Hello Experts.
I Have a task which includes recieving a file and using the data to create new notifications. I need to update the fields above (Data elements GEWRK & SWERK ) but i can't find the right BAPI or Function which will do this work for me.
Thanks for your help.
Motty Gal.Hi,
Thanks for your response. Actually after doing further R&D, I saw that work_ctr requires the object key of the work center. I fetched the OBJECTKEY from CRHD & passed. It automatically updated both work center & plant associated.
Awarding you points for your help.
Thanks buddy!!! -
What is Control Center, Work Center and BTM
Can someone please explain to me the Work Center, Control Center and BTM?
Best Regardshi amit,
will u explain more clearly what do u need??
workcenter, control center and btm will come in plant maintance and in guided procedure
ravindra
Maybe you are looking for
-
I just updated to 10.8 Mountain Lion from 10.7.5. Now I must enter my admin password each time I attempt to access my main hard drive. How do I reverse the need for the password? It's a real PAIN!
-
SOAP to SOAP Scenario with an Attachment
Hi, We are using this scenario for transfering file from one location to another location with an attachment. From Web service client we are succefully sending an attachment to XI system. During mapping, we are facing problem while sending an attac
-
Can't use my bb as usb and can't copy images or music
Hello, I've read the post with How To use the bb with USB, I've downloaded the USB drivers V5 and I still can't see my bb as a hard drive in the computer, I restarted the pc and everything... Before that, I installed the desktop and devide manager, t
-
Procedure and Process to upgrade CRM4.0 to CRM2007
Hi, Could you please provide procedures and process for upgrading SAP CRM 4.0 to CRM 2007+ upgrade (Channel Management only) Which will help us to assments and also upgrade process. Thanks and Regards, Raveendra
-
HT1918 PLEASE DO NOT RENEW MY YouriMatchU MEMBERSHİP!!1
I DON'T WANT TO USE Your iMatchU MEMBERSHİP.And please don't get any account from my credit card.