Work center wise authorization
Hi all,
Our client requirement is restrict users from doing operation confirmations on limited operations which are linked to certain work centers.
For ex. If D10DDL, D20DDL, D30DDL & M10PPL, M20PPL, M30PPL are work centers. The 'user 1' is allowed to do operations confirmations in which D10DDL, D20DDL, D30DDL are there. Other than 'user 1' no one should be allowed to the confirmations of D10DDL, D20DDL, D30DDL. Same with 'user 2', he should allowed for operations in which M10PPL, M20PPL, M30PPL are there.
How to map the same? Kindly help. Useful answers will be rewarded.
SmanS
Hi SmanS,
I am not a basis person, so i really cant give you a step by step procedure. But in general it is done in PFCG t-code, the object has a few fields & in this case the object -> C_AFVG_APL has fields WERKS, ARBPL, PS_ACTVT.
So you need to assign the values of work center to ARBPL & plant to WERKS, then create different profiles & based on your need, have to assign it to the respective users. Also you need to ensure that this object is checked in the respective t-codes.
Well if you feel you have got a solution which you can work on, award points & close this thread & check the basis forum, maybe someone there can help you.
Regards,
Vivek
Similar Messages
-
Work Center wise actual activity information.
Dear All ,
We have requirement of Z report creation for cost center wise work center wise actual activity report . But we are unable to find work center and actual activity line item wise link up in any table for development of above report.
So please provides us more information by which we can develop the above report.
Thanks & Regards
ShriHi , the link of Cost center and work center are -
Cost center - Object Id - CRCO table . Object Id - Work center - CRHD.
I hope this is sufficient for your report.
Regards
Ranjan -
Work center wise production order infomation report
Hi all,
i have a requirement that workcenter wise (with date) production order information with quantity details (plan and actual).
Eg: My production order quantity - 40 nos. (it takes 4 days to finish).
i have three operation in production order.
my order scheduled start date - todays date.
In standard, when enter my first operation work center, system showing production order and its quantity (40 nos) . but i need to split that order quantity in report.. means on todays date for particular production order - order quantity = 10 nos.
Clent want like that (with quantity break) report..
Any standard report ???
If customization.... How it can be mapped in SAP.??
Thanks in advanceHi,
You can use the FM COIS_SELECT_ORDER_DATA_READ.
CALL FUNCTION 'COIS_SELECT_ORDER_DATA_READ'
EXPORTING
iv_prod_order_sel = lv_prod_order_sel
iv_proc_order_sel = lv_proc_order_sel
iv_planned_order_sel = lv_planned_order_sel
iv_rem_objects_only_sel = lv_rem_objects_only_sel
is_objects_to_read = ls_objects_to_read
it_parameter = lt_parameter "General Structure for PARAMETERS and SELECT-OPTIONS
it_status_hdr = lt_status_hdr
it_status_opr = lt_status_opr
it_status_cmp = lt_status_cmp
TABLES
ct_ioheader = lt_ioheader
ct_ioitem = lt_ioitem
ct_iodocl = lt_iodocl
ct_ioopdocl = lt_ioopdocl
ct_iomamo = lt_iomamo
ct_ioconf = lt_ioconf
ct_ioopconf = lt_ioopconf
ct_iosoconf = lt_iosoconf
ct_iogomo = lt_iogomo
ct_ioopgomo = lt_ioopgomo
ct_iosogomo = lt_iosogomo
ct_iogmer = lt_iogmer
ct_ioopgmer = lt_ioopgmer
ct_iosogmer = lt_iosogmer
ct_iosequen = lt_iosequen
ct_iooper = lt_iooper
ct_iosoper = lt_iosoper
ct_ioopcomp = lt_ioopcomp
ct_iooppreq = lt_iooppreq
ct_iosopreq = lt_iosopreq
ct_iooppord = lt_iooppord
ct_iosopord = lt_iosopord
ct_ioopmst = lt_ioopmst
ct_ioopprt = lt_ioopprt
ct_ioopcap = lt_ioopcap
ct_ioopscap = lt_ioopscap
ct_iosocap = lt_iosocap
ct_iososcap = lt_iososcap
ct_ioopsccf = lt_ioopsccf
ct_iososccf = lt_iososccf
ct_ioprodlist = lt_ioprodlist
ct_iomatver = lt_iomatver.
This FM get data from the report used by transaction COOIS. If you needed the header data then you can use lt_ioheader table and seperate the data with the date. If you need at operation basis the you can use lt_iosoper table. You can use this FM to create custom report even with the checks like material availability, PRT availability, capacity requirement etc.
Thanks and regards,
Pradip
Edited by: Pradip Ray on Aug 26, 2009 8:26 AM
Edited by: Pradip Ray on Aug 26, 2009 8:26 AM
Edited by: Pradip Ray on Aug 26, 2009 8:26 AM
Edited by: Pradip Ray on Aug 26, 2009 8:27 AM -
Work Center specific Authorization
Hi all,
My specific requirement is we have 7 various plants and each plant having 2 work centers and planner groups like one is for Elect and other is Mech. Now my client wants that particular plant only have the authorization for its particular work center and planner group.
Means if plant 1 having work center Elect1 and mech1, this plant is not authorize to make notification or order of plant2 work centers say Elect2 and Mech2. Is it possible? What am I suppose to do for that?
Thanks,
AnishHi Anish,
Nothing is required to be done by Functional Consultant. You just need to contact your basis team.
You have to provide him role/profile for which you want to change authorization for auth object C_AFVG_APL.
This auth object will have fields as below
1) Plant
2) Work center
3) Action
The following values are used for the actions:
01: Create
02: Change
03: Display
41: Assign PS texts
42: Allocate materials
43: Assign PRTs
44: Assign activity elements
You need to tell him for your role/profile - which plant, which work center and which action should be allowed.
So accordingly user will have only those limited authorization. -
Work center wise operation consumable
my requirement is operation consumables issuing from storage loction to the work center
i want report what are consumables isued to the work centerHi,
In standard SAP,
a. we have the transfer posting from the Storage location to the Storage location only
b. Issues ( Stock reductoin or consumption ) can be done to order/Cost center etc only.
c. Material cannot be issued to the workcenter.
Note: Generally operation consumables if ther are bulk and less value you can directly issue to the cost centre
Reg
Dsk -
Profit Center-wise authorization for posting period
Hi
I have two profit centers - 1000 and 2000 under company code A001. Now management requires that posting in different must be restricted separately. For ex: Profit center 1000 needs more time for closing. Hence Profit Center 2000 must be closed in OB52 even though Profit center 1000 is opened.
Posting period variant assigned to company code: A001 is 1100.
Now in OB52, i gave
Variant:1100
Account type: +
GL Accounts: 1000000 (from account) 99999999 (to account)
From period 1/2011 to 2/2011
Authorization group: 1000
But how to link (add / remove) user id to that authorization group. Please helpHello,
I'm using new GL and i've activated the Profit Center cenarios. However, the profit centers filled at the GL items aren't transferred for the FAGLFLEXA / FAGLFLEXT tables.
Do you know why isn't the FAGLFLEXA / FAGLFLEXT filled?
Additionally i'm using the transaction F.5D and 1KEK to transfer information at the GL items for the GLPCA / GLPCT tables. Why aren't this information transferred online?
Best regards,
Rita Magno -
Reporting - restricted for profit center-wise
Hi
My client has two profit centers (1000 and 2000) in one company code. Both profit centers are totally independent. Now my client requirement is that when user of profit center 1000 runs AR01 (i.e. asset balances), he should be able to see assets only for his profit centers i.e. 1000. Asset of profit center 2000 should not appear in that report.
In EHP 4, there is provision for Profit Center-wise document posting, change and display functionality. But i want to know if this profit center-wise authorization will work for asset balances report (AR01) and other assets reports also.
Please help.
Edited by: Deepak Agrawal on Jan 1, 2012 5:43 PMK_PCA or authorization object for profit center is not check in assets report.
In AR01 you cannot restrict the results to profit center as it is not checked in authorization . The fields which are checked are company code , Asset class and asset views.
Hence you will have to lookup for alternatives like selection based on plant or cost center or responsible cost center etc.
In case if the requirement is a show stopper then you will have to code the things in Enhancement points as there are no BADI or Exits available for the same .
Cheers,
Dewang -
Actual hours done against a work order for a Work Center by non-maintenance
Hi All,
I have below question with respect to work center.
-If there is this actual work hours done on a work order by non- maintenance personnel for a certain work center and same is not reflecting under operation tab of work order, then where & how this hours (done by non- maintenance personnel) for a work order is maintained for that work center?.
-In which database table these hours done by non- maintenance personnel for a work order is stored by work center wise.?
ThanksHave a look at the document flow button in the order header.
The confirmation data resides in table AFRU
PeteA -
Dear Gurus,
How can I use work center Hierarchy for Capacity Planning.
I have 5 Lathe machines. How can I use Work Center Hierarchy?
I also need Work Center Wise confirmation.
Please guide me. Also let me know how should I maintain data in work center as well as in routing.
Thanks in advance
RGCreate a new WC (in CR01) as category 0004. This will be the top level WC in your hierarchy. <BR sab="44">Create a hierarchy (in CR21). <BR sab="46">Add your 5 lathes and the newly created top level WC to the hierarchy (in CR22). This can be tricky: the WC you just created must be the top level, the other 5 must be under it. <BR sab="50">Pull the capacity data (in CM01) for the hierarchy: go to settings, hierarchy, check the cumulation of requirements and capacities and type the hierarchy name. <BR sab="54">Route things as before, to the original 5 lathes.
-
Operations Executed at a Particular Work Center for a Sales Order
Hi All,
We are using a MTO scenario. I have to get a report in which I have to list work center wise operations (and the corresponding material) which are carried out for a particular sales order.
User will create a sales order, and then do Sales Order based MRP in MD50. System will do a BOM explosion for the header material and will generate planned orders for the production relevant materials. User will then convert all these sales order specific planned orders to production orders. For a particular sales order these would be many operations (at different BOM levels may be ) that would be carried out at a particular work center. I need to get a logic for generating this report. Is there any FM etc or table table-field fetchig logic....
Regardshi,
maintain initial screen entry as sale order.
Pass values to AFPO table. Identify all AFPO-AUFNR values which satisfies AFPO-DAUTY = 10
Transfer AUFNR values to AFKO and check AUFPL (Routing number of operations in the order)
Transfer AUFPL to AFVC and check the value of AFVC-ARBID (Object ID of the resource)
Transfer ARBID to CRHD and check value of ARBPL (Work Center)
Regards,
Pavan -
Hi All,
How to get details for Work center wise WIP per product / order?
Thanks & Regards
VarmaTo get a report of WIP values per Plant, material and order number, you need to run the Production order overhead and then run WIP (in a test mode if you do not continue to settlement) the standard WIP report will give you:
value of WIP, plant, material, and order number
Summarize it as you want.
WIP is calculated for the ORDER while work centers are at a lower level, so you won't get WIP in a Work Center.
Althea -
How to find the reporting for work center machine wise
hi gurus
My question is . In one work center machine capacity category 2 machines are used. Client is asking the report machine wise. i.e as 2 machines are available .What is the capacity utilisation for each machine.Provide me the information for this. Thanks in advance
kalyanHi Kalyan
you have to make some settings in production order & work center first.
In work center capacity header ,you have to make indiovidual capacities as 2.
In the same capacity header screen by going through the menu Goto--->individual capacitities define these different individual machines.
In the production order operation detail screen goto " capacity reqmt assignment " assign the quantities for different work centers.
Adfter this in the confirmation CO11N you have to fill the split field accordingly& confirm different wortk centers seoperatley.
Then you can the report in the CO14 for diferent work centers.
you try this.
Regards
YMREDDY -
Work Center/Equipment wise Material issue report
Hello Experts,
Greetings.
We are creating maintenance order.After completion of work we do issue the goods against cost center/order.
We have almost 52 machines with Same type/Same Make.We have created one cost center only.We are able to get the report cost center wise issue from the system
Now the issue is how to get report individual machine wise in terms of qty of spares/consumables used to repair that particular machine.
Any help would be highly appreciated.
Thanks & Best Rgds
NitinSir,
Thanks for reply.
Now the issues is while using the report I m able to get the material where used list for only those order which are in Outstanding/Processing.
But If I want to show the report for order which status has been set as a 'teco' and goods have already been issued against that report,it does not shows any data.
I have tried using check box 'completed",to view the closed order data but it does not shows.It says No objects were selected.
Please help me out what could be the problem?
Thanks
Nitin -
Work center-Machine wise report
Hi Guys,
I have a work center for ex CNC in which i have taken 3 machines,in capacities i define the individual capacity for each machine & iam also able to split the capacity amoung the machines,Now if i want to take a report to give to the work center supervisor -list of the operations that i have loaded in the work center,<b>is there any standard report available where i can even get the detail of the load in the machines of particular work center?</b> otherwise pls give me some workaroundHi vijay,
what u need is, day or weekly wise prodution load for each machine .. am i correct?
u need a report containing details about what are all materials to be produced and its all operations for each machine.
In that case u have to develop some customized Zreport.
regards
pradeep -
Report for work center hours , maintenance order wise for SAP 3.1i version.
Hi Team,
We are using older version of SAP, that is SAP 3.1i. Here we don't have any transaction code such as IW47. Is there any other way to get report of work center and work center hours-order wise.
Please respond.
Regards,
KiranHave a look at table AFRU
PeteA
Maybe you are looking for
-
Is there a way, in iWeb 08, to have a drop down text box. Click on a little triangle, as in iWeb's page column or Mail's mailbox list, and have text appear? Heading <<< before. Click on the > (arrow) and.... Heading - Item one - Item two
-
Transaction timeouts behaviour - explanation needed
Hello all, I'm a newbie to Weblogic and would like to understand how transaction timeouts work in Weblogic. I have a EJB2 application running under Weblogic 10.3 and using Oracle 11g database via thin jdbc driver. I noticed that if I set trans-timeou
-
My playlist on My iPad 2 has blacked out, the music is all there and i can listen to it but i have no playlist breakdown of songs and i can only go back and forward with the arrows to listen to music. Any help would be appreciated, thank you.
-
Move SUP role from Server 2008 R2 to new Site System running Server 2012 R2
Is it possible to move the primary SUP role which is currently running on a separate site system under Server 2008 R2 (WSUS 3.0 SP2) and move it to a new site system running Server 2012 R2 using the same SUSDB? I've moved the SUP role around before b
-
Photoshop Elements 8 Files Won't Open
Just got my 1st IMAC on Friday and am trying to figure it out. I have downloaded a trial copy of Photoshop Elements 8 and am not having any luck opening the files I download. The .zip file downloads into the downloads directory, I double click on i