Work Order / Notification Transfer - SAP Work Manager 6.2

Hey Guys,
How do we transfer notification based on Work Center, Standard work manager does not updates main work center.
Requirement is to Transfer notification which are associated with work order when we transfer work order.
Please let us know how to transfer notification based on work center.
Thanks,
Madhur Kanungo

In Agentry you can trigger a Notification Change Transaction (Z_NotifTransfer) without a screen and update "WorkCenter" field on Notification Object. Please make sure you IsEdited = True and NeedsXmit = True along with the change to the Notification. This will update the notification object along with Work Order.
The other option is to extend the WO MDO Class and invoke BAPI_ALM_NOTIF_DATA_MODIFY in the Transfer method.
thanks,
Chandra

Similar Messages

Email Sales order link from SAP Work Place

Dear SAP Gurus,
Well guys i have to mail the sales order link through the work place but its not working for the sales order. but its working for delivery order and billing document...so i want to know that why its not working?
Regards,
Mohsin

Dear All,
Can u please help me on this situation? I will be very thankful to u....
Regards,
Mohsin

PM work order tables in SAP

Do anyone know which table in SAP contains the functional location and equipment info of an work order. I can find most of the info of an order in AUFK but missing the two fields mentioned above. Thanks

Hello Robert,
you can get the functional location from ILOA (first select field ILOAN form AFIH, then select the functional location from ILOA). Or use view CAUFV - as far as I remember, the functional location is part of CAUFV too.
Best regards
Stephan

Print out documents attached to a work order before Releasing a work order

Team
Requirement is given below. Need some advice.
How to print out documents attached to a PM work order before the order is set to released status?
Further the same documents have to be printed again after the order is released.
Regards
Sunil

I think there is an OSS Note on this one - have a look there.
There is a work-around where you do the following:
- Enter IW32 and RELEASE the the order (but do not save)
- Print out whatever you require
- Exit the order without saving (therefore the RELEASE is not saved)
Note: for one client we put a PRINT button on the Enhancement tab (user-exit IWO10018) for this purpose.
Prometheus Group also provide a solution called Print Manager
PeteA

Sending PM objects (work orders,notifications) to external address

Hello,
I have a question about sending PM object to external address type of recepient.
When I select 'send object with note' and pick external address, I only get attached .txt file to be sent (with order number), not the actual order..Whereas the client is going to have virtually all services done by external vendors, who wouldn't have access to the system.. They aren't planning using Enterprise Portal
Could anybody suggest how to accomplish that?
Also, second portion of the question..
Help says that the attachment of the object are not sent with it, ie. the recepient can only access them in attachment list in the object display.
I was just wondering is there any enhancement that we can bypass it and enable it in email along with attached order
Thanks in advance

Thanks Peter,
Actually, I couldnu2019t find that note..
But I guess maybe I wasnu2019t clear enough, let me rephrase my question.
So, they have a PM order PDF smart form and it doesnu2019t look a problem to mail that. Whereas,mailing the question is whether thereu2019s a way to send also attachments within that order which doesnu2019t look like being available by standard SAP. Again, I am not talking about attachments from whatever hard drive, which you can attach when sending via u2018send object with noteu2019), but enclosing whatever supportive docs with order.
So, any ideas how to enable it?
Thanks in advance

GRC 10 Work Inbox Notification or Universal Work List instead of SMTP

Hi,
I wanted to check with you all if there is a possibility to get SAP internal Work Inbox or UWL notification instead of outlook/SMTP notification.
The scenarios this will be required for us are
1. User ID details communication at the end of the request.
2. Notification if access is approved/ rejected.
3. Notification for Firefighter approved or rejected.
4. BRM role approval notification
Kindly let me know if we can pull the notification from Outlook/SMTP to internal SAP Mailbox.
Regards,
Prasad Chaudhari

Hi Guru,
If I am not wrong the items mentioned send notification to outlook/smtp and not work inbox. The work inbox will get request for approval and uar/sod review.
Are you talking of some parameter/settings to change this behaviour?
Thanks,
Prasad Chaudhari

Creating new work order - error on %001

Hi all,
Creating a new work order from the SAP Work Manager 6.0 application should be a standard functionality,
However, on the system of our client, this goes wrong.
Upon creating a new work order, we get the error 'Enter a numerical operation number'.
New objects get an ID that starts with 'LOCAL_xx:xx:xx', which is converted to %001.
SAP should recognize this and convert this automatically to 0010, 0020, ...
how come this does not happen?
it works fine on our SAP system, our customer's system gives an error.
Kind regards,
Judith

Have you done any enhancement to standard product "specifically create method of Work Order Class handler" . or the standard product functionality itself is not working ?
I don't see any reason why it works in your system but not in customer system. Try to put break point in create method of Work order class handler and check what values are passed for operation number before invoking Work Order create BAPI.
Infact Work Manager product converts local numbers to incremental sequential numbers before invoking create BAPI for Work Order.
BR,
Manju - SAP CEG UX/Mobile

SAP Work Manager 6.0 - Creating notification on mobile device (customizing the default Start and End date)

Dear all,
When I create a notification in SAP Work Manager 6.0, the notification gets created in the back-end with Start Date equal to Current Date + 1 day and End Date equal to Current Date + 3 days.
Can you advise where I can customize this behaviour, so that the Start Date is for example equal to the Current Date and End Date being 14 days in the future? Is this something that would need to be configured in Agentry Editor or within the ABAP stack?
Many thanks for your support.
Pavel
Tags edited by: Michael Appleby

Hi Jason,
We went this route and identified the initial values, and tried to modify those.
No impact though, as if those values are being overwritten elsewhere (whatever value we set, no change on the backend).
Please see the attachments with screenshots of Agentry Editor.
Many thanks.
Pavel

Adding a new screen on SAP Work Manager 6.0

Hi All;
I'm working on customising the SAP Work Manager 6.0 application. One of the things that I have to do is add a new screen "Pool Management". I have been trying to achieve this via the Agentry Editor 3.7.2 with no luck. So the first thing that I did was to copy an existing screen, for example the TimesheetView screen set, hoping that there would be a duplicate screen similar to this, but this doesn't seem to be adding the duplicate screen when I test via the Agentry WPF client. Please kindly advise how I would go ahead with a requirement like this. Please see image below for the screen addition that I am working on. I would really appreciate your help in going about with this!
Much appreciated!
Sizo Ndlovu

Sizo,
Steve is correct. Examine the main screenset. Choose the platform, then copy an existing screen or add a new one. Modify it as needed. It will now display as a new tab on the client.
Jason Latko - Senior Product Developer at SAP

Error while generating Work Order

I have a problem while generating Work orders in SNC.
I set the configuration as belows.
<General setting for Work Order generation>
1.Granularity -> Work Order per Purchase Order Item
2.Create WOs with Report -> Check
3.Publish Work Order Upon Creation and PO change -> check
4.Send Work Order Information -> Upon Agreement and when a Phase Is Completed
5.Send Production Progress Notification -> When a Phase Is Completed
<Phase Structure>
1.Comp. from SC Order -> Use SC Comp. as Input, Product and Co-Products as Output
<Master Data Assignment>
1.MD Used for WO -> Phase Structure
2.Active -> Check
When I use the program /SCA/WO_CREATE for generate Work Orders, Run time error occurs with below messages.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Except.                CX_SY_REF_IS_INITIAL
<Error analysis>
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in
procedure "GET_PIO_LCTYPE" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "LS_NODEREF-R_NODE").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
<Missing RAISING Clause in Interface>
Program                                 /SCA/CL_WO_PHASE==============CP
Include                                 /SCA/CL_WO_PHASE==============CM00V
Row                                     1
Module type                             (METHOD)
Module Name                             GET_PIO_LCTYPE
<Trigger Location of Exception>
Program                                 /SCA/CL_WO_PHASE==============CP
Include                                 /SCA/CL_WO_PHASE==============CM00V
Row                                     45
Module type                             (METHOD)
Module Name                             GET_PIO_LCTYPE
Please let me know what I have to do for this error.
Thanks and Regards
JT

Hi JT
Clearly the problem is with the method GET_PIO_LCTYPE of interface /SCA/CL_WO_PHASE
Check whether note 1363834 should be implemented
It could be because of some corrupted WO entries in database
or some customizing entry it is expecting
suggest you to debug the method and try to check what it is expecting
Best Regards
Vinod

So where we see the status of this work order request

Hi All,
I have submitted work order WO00034931 in SAP for a new vendor address but it seems my approver (Andre Vabre) never received it. In SAP, its status is Submitted for Approval.
So where we see the status of this work order request
Thanks,
Kumar

Hi
You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
variant conditions to define surcharges and discounts for a variant
Variant u2013Pricing steps
Create condition record
create a procedure where you enter the reference from the characteristic
Assign the procedures to either the characteristic values
configure the material in the sales order
The net price for the material is displayed
If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
In addition, the Conditions pushbutton is displayed.
On pressing this pushbutton,
One can see which conditions have
influenced the price.
I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
Thanks

Work Order based Purchase Requisition

Hello,
We currently create purchase requisitions from work orders in our SAP system today. The issue we face is can we add additional lines to these purchase requisitions without updating the work order.
We want to add the new line in the purchase requisition directly from transaction ME52N.

Hi All,
I have a situation in which i have to populate values for the fields in the 'custom data' tab in Purchase Requisition. But here I am not creating Purchase Requisition, instead when a Work Order(Plant Maintenance related) is created, Purchase Requisition automatically gets created. So, i want an exit which relates Work order with Purchase Requistion so that i could populate values to the fields in the 'Custom data' tab when i save the Work Order.

Why the "Work Orders" Menu Item is hided in 2005 Edtion?

David:
Thank you!
The "Work Orders" menu item in 2004 edtion is must useful, But it be hided in 2005,Why ?
and whether can I show it and use it?
help me, please!
thank you!

Fu
in the SAP help the following is written:
Work Order Window
Definition
The Work Order Window, from earlier versions of SAPBusiness One, has been replaced by the Production Oder. However, if you had open Work Orders when upgrading, the old Work Orders can still be viewed.
When a Production Order is open, click on the base document icon on the toolbar to display the Work Order on which it is based.
i recommend you to use F1 in your sbo client
and search for "work orders"
than select title "Work Order Window" and there is everything in Detail !
regards
David

Using a hierarchy but also showing work orders that are not in hierarchy

good morning bi people,
i have a requirement to show data from a hierarchy which includes Operation and Maintenance information. for example it has an account broken into labour/material/trucking and below this is the pm acivity type and secondary cost element (concatenated). this hierarchy is a manually created hierarchy that is uploaded to BW and is not in ECC. The users do not want to see the concatenated field at the end of the hierarchy, but instead, want to see the Work Orders that have the PM activity types.
At the present time, we have the report using the hierarchy but we need the work orders to replace the pm activity type/secondary cost element concatenated field. the work order field is a free characteristic and when we drag in the work order in analyzer, it works correctly.
1) is this possible to use the hierarchy and somehow map the work order field to the end of the hierarchy within crystal?
2) do you have a suggestion to change the hierarchy, without being a manual nightmare?
all conversations are welcome.
Erik

Good Day Ingo,
i have created a word document with screen shots of the hierarchy from BW, a screen shot of the BEx showing the free characteristic of Maintenance Order and a screen shot of the crystal report with the PM Activity type concatenated to the Cost Element. Once again, we do not wish to see the concatenated field, but rather see the Maintenance orders that have a PM Activity type the same as the concatenated field.
here is the link.
https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B1j5hXTptfntYWI1MDUzNGEtY2MxNy00YmMzLWJjZjEtZDA4OGZiYmMyNzFh&hl=en&authkey=CKq4xcgJ
thanks Ingo,
Erik

Actual hours done against a work order for a Work Center by non-maintenance

Hi All,
I have below question with respect to work center.
-If there is this actual work hours done on a work order by non- maintenance personnel for a certain work center and same is not reflecting under operation tab of work order, then where & how this hours (done by non- maintenance personnel) for a work order is maintained for that work center?.
-In which database table these hours done by non- maintenance personnel for a work order is stored by work center wise.?
Thanks

Have a look at the document flow button in the order header.
The confirmation data resides in table AFRU
PeteA

Work Order / Notification Transfer - SAP Work Manager 6.2

Similar Messages

Maybe you are looking for