Works well only on charging!
I m having this problem from past one and a half year its been two years since i have purshased this Pavilion g6 2102TX. It only works well when it is on charging otherwise it hangs. Because of this i have to put it on charging while i work! Its fan also stars at very high speed & then becomes normal. Please suggest what sholud i do regarding this problem. PLEASE HELP !
Hi
Please try to update the Bios & Chipset driver from the website restart the unit and have it checked.
Bios Link
Driver Chipset
Intel MEI
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Similar Messages
-
Samsung monitor working well only sometimes
I have Mac Mini 2011 with the Samsung SyncMaster T24B350 monitor. Sometimes it works well, but also sometimes I have problems for starting up the machine. The image appears to be stripped and distorted. It fixes sometimes when I restart the machine, but sometimes I must restart it three or four times until it gets functioning well.
I tried all the configurations: the PC cable, the HDMI cable, and the problem continues to appear.Tr resetting the VRAM
About NVRAM and PRAM -
VBA is working well only with step by step method pressing F8 key
Hi
Something is gonig on with my E-tester, I made a script with VBA in some pages and typed some slobal procedures and variables in ThisScript page:
Let me picture this, for example I have this in page 2:
Private Sub RSWVBAPage_afterPlay()
ThisScript.PrintVersTxT ("Click here for a printable version")
RSWApp.WriteToLog ThisScript.actionTXT, ThisScript.resultTXT, ThisScript.summaryTXT, True
If ThisScript.PrintVersFunc("Main_Table", "Table", "id") Then
RSWApp.WriteToLog ThisScript.actionFunc, ThisScript.resultFunc, ThisScript.summaryFunc, True
End If
End Sub
And I have this in "ThisScript" Page:
Public actionTXT As String
Public resultTXT As String
Public summaryTXT As String
Public actionFunc As String
Public resultFunc As String
Public summaryFunc As String
Public Function PrintVersFunc(Patt As String, TblName As String, Prop As String) As Boolean
Dim tbl As HTMLTable
Set tbl = RSWApp.om.FindElement(Patt, TblName, Prop)
If tbl.Width = "100%" Then
actionFunc = "Print Version"
resultFunc = "Failed"
summaryFunc = "Printable Version fuctionality is NOT working"
Else
actionFunc = "Print Version"
resultFunc = "Passed"
summaryFunc = "Printable Version fuctionality is working"
End If
PrintVersFunc = True
End Function
Public Sub PrintVersTxT(LinkTXT As String)
Dim mouse As HTMLLinkElement
If RSWApp.FindInHtml(LinkTXT) Then
actionTXT = "Text Found"
resultTXT = "Passed"
summaryTXT = "Text for Print Version is Present"
Set mouse = RSWApp.om.FindElement("javascript:reformatPage()", "A", "href")
mouse.click
Else
actionTXT = "Text NOT Found"
resultTXT = "Failed"
summaryTXT = "Text for Print Version link is missing"
End If
End Sub
So in the second page I called first the function ThisScript.PrintVersTxT to see if the string I send as a parameter is in the html page, if it so, the function click on the link I wanted to click on, then after that I called function ThisScript.PrintVersFunc this function is going to check if a table change its size(it should be different of 100%) after I clicked on the previous link, if the table changed, this function stores in actionFunc="Print Version", in resultFunc="Passed" and in summaryFunc="Printable Version fuctionality is working"
So I am talking about this part of the code
If tbl.Width = "100%" Then
actionFunc = "Print Version"
resultFunc = "Failed"
summaryFunc = "Printable Version fuctionality is NOT working"
Else
actionFunc = "Print Version"
resultFunc = "Passed"
summaryFunc = "Printable Version fuctionality is working"
End If
I know that the table changed its size from 100% to 85%, but if I let running the script until the end, the e-tester goes to the "ELSE" part and if I run the script step by step with breakpoint in the code the E-tester goes to the first part of the "if".
E-tester should goto the first part of the "IF" whatever the runnig method be, but it does not.
What could be the problem?? is there a especial setting in the e-tester to resolve this?Yes, I am going to print the table width out with the WriteToLog function, but the weird thing here is that if you put a breakpoint to run the code step by step everything is ok, I mean the code recognize that the table width had changed, otherwise the e-tester does not recognize it
I'll let you know how is this going... thank you for your help -
My GT70's backlit keyboard doesn't work well
DISPLAY: 17.3" Full HD Anti-Reflective 1920 x 1080
CPU / PROCESSOR: Intel® Core™ i7-3630QM Quad Core Processor (6M Cache, 2.40GHz - 3.40 GHz) 45W
GRAPHICS / VIDEO CARD: NVIDIA Geforce GTX 675MX 4GB
SYSTEM MEMORY: 16GB (4x4GB) DDR3 1600MHz RAM
HDD: 128GB mSATA SSD + 750GB 7200rpm Hard Disk Drive
OPERATING SYSTEM: Windows 8 64bit
KEYBOARD: Steel Series Gaming Backlit 102-Keys & Touchpad
AUDIO & SPEAKERS: Dynaudio Tech Speakers x 2 + Subwoofer x 1
WLAN: Built-in 802.11b/g/n WLAN
CARD READER: 7-in-1 Card Reader (SD/SDHC/SDXC/XD/MSPRO/MS/MMC)
USB PORTS: 2 x USB 2.0, 3 x USB 3.0
DISPLAY INTERFACES: 1 x HDMI 1 x VGA
OTHER PORTS: 1 x E-SATA, 1 x Microphone-in Jack, 1 x Headphone-out Jack
ETHERNET: 1 x RJ45 LAN
OPTICAL DRIVE: Blu-Ray Reader & DVD+/-R/RW Combo Drive
BATTERY: 9 Cells
Well... my 11 months old GT70 got only problem with backlit keyboard.
it worked well until 2 months ago, but it suddenly didnt work well
Only right side of keyboard has light.. but left and middle side has really dim light.
Also, there's some color that doesnt work. when i set to white color it just comes with purple. orange becomes purple, green becomes blue.
i already reinstalled the KLM (keyboard LED manager), but still doesnt work.
tried with other color
Same..
color problem..If you can't provide more information than that, we can't really help you.
Provide more details via : >>Posting Guide<<
If you can't do that, then contact MSI.
>>How to contact MSI.<< -
There is a problem with my apple watch.it is not working well .There is a problem in its charging .The repairers says that contact to your company and ask them to provide you its software.
Please help me.Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
As to your issue, Apple does not and never has made a wristwatch as such. The only thing close to a watch that they have made was the 6th-generation iPod nano:
http://support.apple.com/kb/ht1353#iPod_Nano_6G
which has a clock feature and which some people have worn as a wristwatch. Is that what you mean?
Message was edited by: varjak paw -
hello sir/madam
this is a very urgent and important question. i nedd your assinstance.
i have iphone 3g. i was working well. about 2 months earlier i bought an app of $2.99. after then every thing was okay. but last week i installed some free games and 2 days later itunes send me a reciept via email and you guyz charged me $34. now whenever i try to install free apps they want my billing info. please i need your help and want those money back.
$34 for free games , i will show u the reciept. if its not possible to get the money back i will forced to take proper action.
thank you sir /madam.The games might be free but I think you've clicked In-App purchase which cost money. You are warned before you accept the In-App purchase. You not that young and you can read so take action if you must. It's your own fault and all purchases are final. Good luck.
-
my iphone 5s with lightning to 30 pin adapter doesn't work in my audi A6 to play music, only to charge the phone. is there a fix for this?
Is the adapter the genuine Apple product or a copy
-
I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help
If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.
-
Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Please help.
Can can hear any sound from my iphone4
But I can play ringtone only.
If I plugin the earphone, sound working well
Try to restore & setup as factury defaul but still not working.
Please helpi had the same problem. insted of switching
snd_digital_surround to
i just bought a new sound card.
you can do eather of them. -
Hi, i have purchased iPhone 5 about 15 days ago, its working well but only one problem that it has is that some time its losting signal and appear as no serves. would you please help me in this reqard. thanks
Well, it could be that your carrier doesn't have a signal when it looses its signal. You could try resetting network settings which might help - Settings/General/Reset/Reset Network Settings. You'll need to set up any wi-fi networks you connect too again. If you're still having issues, contact your carrier.
Good luck! -
My flashdrive only works on one of the usb port. it will not work on the other usb port. however, the other usb works with my iphone charger.
any suggestions? should i take it in? its a brand new laptop.Reset the SMC and PRAM
SMC Reset:
Shut down the MacBook Pro.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
PRAM:
Shut down the MacBook Pro.
Locate the following keys on the keyboard: Command, Option, P, and R.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
my new ipad mini worked well this morn, put it on charger, it got warm, and now will no turn on
See this Discussion
https://discussions.apple.com/message/19521062
The principle is the same -
my iPhone works well...suddenly hang when im on the phone...trying to reset with the home and power button, doesnt work, trying to charge for for several hour..its not charging, trying to access in itunes,,cannot acces.....what to do...please help
Has it ever gotten wet?.. I'd make an appointment with Genius bar at an Apple store, there's something majorly wrong that a simple 'reset' isn't going to fix...
Sorry...
Maybe you are looking for
-
My iPhone has a black screen!
Hello apple community. My dad just sent me a used iPhone 4s for my birthday about 1 week ago. Today I was using my iPhone and I went to eat and left my phone on my bed. Then when I came back , I tried turn it on and it didnt turn on. It has a black s
-
Videos and special effects... (?)
Okay I just found these.. they are great! But I was wondering... is anyone else having issues when filming either backlit or in the snow? My vids are... as best described... "mucky" looking! Is there not an option to increase the contrast or to 'vivi
-
When I try to burn a CD I keep getting an error message "4280" Can anyone help me solve this issue...thanks
-
Absence amount in infotype 2001 without taking wrok schedule into account
Hello We are using CATS. For the purpose of available hours of an employee only the total of a week is needed. So for instance 25 h/week. We set up a week workschedule 25h/week with day schedule of 5 hours per day (hours evenly spread over the 25 hou
-
How do I uninstall FCP X Trial (I want to purchase and re-install "properly")?
I installed the FCP X Trial app and have decided to purchase and go forward with FCP X, but have some questions: I see from the Apple FCP installation best practices document (HT4722) that it's not advisable to install along with Studio (instructions