Writing CSP (plz help) for windows logon

Hi all,
I am using Gemplus GemXpresso 211 PK card for windows 2000 log on..
How to write CSP for the same?
Is there any "Cryptographic Service Provider Development Kit" available???
Hope any positive reply.
Thanks in adv.

1) You need to contact GEMplus for the gory technical details of how to communicate with the card (probably there is a device driver written by GEMplus, you need to know how to communicate with the drivers). Check if the GEMPlus site has some technical information available.
2) Search "CSPDK" in MSDN downloads ( http://msdn.microsoft.com ) , there is a download of the CSPDK. The sample programs do not work as is (you'll need to change some file names...), and you need to search the MSDN newsgroups ( news://microsoft.platformsdk.security - or http://msdn.microsoft.com/newsgroups, require a .NET Passport, but it is free - just a single registration) and ask for help.
To make it work in a production environment, you'll need to submit the finished DLL to microsoft ( mailto : cspsign at microsoft.com ).
3) Prepare yourself for a daunting task - your skills will be heavily exercised.

Similar Messages

Need help with two-factor auth for windows logon using CSS

Hi all,
I have been trying for a couple of days now to get two-factor auth for windows logon working on my X1C Type 3443.
I am running Windows 7 (64-bit) with Lenovo System Update 5.06.0007, Lenovo Solution Center 2.6.001.00, ThinkVantage Fingerprint Software 5.9.9.7282, ThinkVantage Client Security Solution 8.30.0031.00. If it's of any importance, my X1C was originally shipped with Windows 8, but I couldn't stand it and reinstalled Windows 7 instead.
I have uninstalled and reinstalled the above programs in the following order:
1) Install System Update and reboot
2) Install Solution Center and reboot
3) Install CSS and reboot
4) Install Fingerprint Software and reboot
Everything seems to be working fine by itself, except that when I try to configure two-factor auth in CSS, the Fingerprint tab (on the left of the GUI) is greyed out and CSS tells me that I have no fingerprints enrolled. The Fingerprint Software, however, is working just fine and shows me as having a fingerprint enrolled there.
I have spent all morning searching for a solution, but everything I find dates back to 2011, when ThinkPads still came with ThinkVantage Toolbox. I obviously can't download that anymore, so I'm at a loss. Can someone please help? Thanks!
Candace

Hi all,
I have been trying for a couple of days now to get two-factor auth for windows logon working on my X1C Type 3443.
I am running Windows 7 (64-bit) with Lenovo System Update 5.06.0007, Lenovo Solution Center 2.6.001.00, ThinkVantage Fingerprint Software 5.9.9.7282, ThinkVantage Client Security Solution 8.30.0031.00. If it's of any importance, my X1C was originally shipped with Windows 8, but I couldn't stand it and reinstalled Windows 7 instead.
I have uninstalled and reinstalled the above programs in the following order:
1) Install System Update and reboot
2) Install Solution Center and reboot
3) Install CSS and reboot
4) Install Fingerprint Software and reboot
Everything seems to be working fine by itself, except that when I try to configure two-factor auth in CSS, the Fingerprint tab (on the left of the GUI) is greyed out and CSS tells me that I have no fingerprints enrolled. The Fingerprint Software, however, is working just fine and shows me as having a fingerprint enrolled there.
I have spent all morning searching for a solution, but everything I find dates back to 2011, when ThinkPads still came with ThinkVantage Toolbox. I obviously can't download that anymore, so I'm at a loss. Can someone please help? Thanks!
Candace

Wireless printer sharing- Verizon only has automated help-or any help- for windows. i have a mac.

i have a new Brother 490CW which instructs me to "push the WiFi protected set up button" on the router. the Verizon supplied router Ultraline series only has on/off power button. Verizon's help is abysmal. The automated response sends me back the the help for windows. can anyone tell me how to set up this printer as wireless?
thanks.

Pretty good directions here : http://www.brother-usa.com/support/wireless/Step1.aspx?ProductID=MFC-490CW
You'll find the SSID (ESSID) + WEP key on a sticker on the Verizon-supplied router.
Kevin
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Plz help for upgrading to new OS X Mavericks

I purchased MacBook Pro in May'11 with Mac OS 10.6.6 installed. Few months back i downloaded DMG file elsewhere for upgrading to10.6.8 and successfully upgraded without loosing any file & other OS i.e. WINDOWS XP. Now i wish to upgrade to new OS X 10.9.2. Plz help me for doing so.

Thanx for replying, but there is no Apple Store in INDIA, there are only resellers. I approached the outlet from where i had purchased my MacBook, but he has refused for update.
Plz tell me if i can get STANDALONE INSTALLER from "apple.com
". I searched for one which updated directly from 10.6.8 (my present OS) to 10.9.2 at "http://support.apple.com/kb/HT1338?viewlocale=en_US", but in vain.
Please let me link from where i can download installer in a PC working on WINDOWS 7 with gud internet speed.
Regards,
Alok

Modify Logon Help for Windows

Hi,
we are planning to implement a PW Reset Function for the Active Directory Account. SAP IDM would deliver the function Logon Help, which is interessting but for our security reasons not the thing we want.
Would it be possible to modify the logon module in the logon Screen of Windows to show only the questions, and then start a IDM Task in which a inital PW is set to the AD Account and a SMS is sent with it to a mobile Phonenumber which the user has defined before (when setting the answers of questions)?
BR,
Andreas

Hi Andreas,
You can use the IdM API to create your own logon.
Please, take a look at this document for more information.
SAP NetWeaver Identity Management REST Interface Version 2 - SAP Library
Regards.
Iñigo

Fingerprint isn't recognized for Windows logon

I just recently purchased an HP Pavilion DV6-6c10us. When I first started it up, I went through the standard set-up stuff and entered the fingerprint data needed by Simplepass (2012). Everything seemed to work like it was supposed to. I was able to just swipe my fingerprint to log on to Windows at startup. A couple days ago, possibly after either a Windows or HP update, when I start Windows, and try to swipe a finger a windows security message comes up and reads, "Your fingerprints have not been enrolled for authentication." I click OK and just use my password to log on to Windows. Once I get into windows the fingerprint scanner works fine.
I've checked for any updates for SimplePass, and there aren't any.
In the Control Panel, Biometric Devices area, when I click on "Stop using your fingerprint to log on to Windows", the next window opens and reads, "You have no fingerprint data or logon credentials to remove."
How do I get windows to allow me to enroll a fingerprint to log on to windows?
Please help!

Hi,
Not sure why, but the data is not present means its either deleted or currupt. you may need to register the fingerprint reader to logon to windows one more time.
it may not be the one you expected or like to hear. but i think its the easiest and best possible solution on this.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02518653
Good Luck !!!
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Report Veiwer asking for Windows Logon (not database logon)

Hi there,
I'm developing a C# web application in Visual studio 2010; and I'd like to include some crystal reports.
I've done the reports, and they work well, but here's my problem: -
I keep on getting prompted to log in to my computer (windows credentials) when I view the report in a browser.
Some more about my application: -
I'm using .net framework 4, and my application uses the MVC framework.
I've got a "Content" folder where I put my non-MVC pages (including the reports).
I've set the web application to use "Forms" authentication and to allow anonymous access
(The website has public and private pages, and the authentication is not linked to active directory in any way).
Some other clues that I've found so far:
1.) When I "run" the application inside Visual studio I DO NOT get prompted for my windows credentials when viewing a report.
The report displays correctly without any issues.
2.) When I view the report through my "localhost" URL, then I am prompted for my windows credentials.
So I though about file permissions, and set the web site's "Application Pool" identity to myself, and gave myself full permissions on "C:\Program Files (x86)\Business Objects" and all the files / folders contained in that folder.
It still prompted me for my windows credentials when I viewed the report.
3.) If I don't put the CrystalReportViewer control on my page, then I don't get prompted for my windows credentials.
Well, that's all I can think of. Please have a look, and let me know if you can help me?
Thanks,
David

Hi Adam,
Thank-you for pointing me in the right direction.
To cut a long story short: -
I had a look at the folder "...\aspnet_client\system_web\4_0_30319\crystalreportviewers13" and my NT permissions were perfect; but my IIS was set up to deny anonymous access to this folder.
I fixed the IIS setting, and the windows login prompt disappeared.
Again, thanks.
David

Created the following in iShowU and need help for Windows User

I know a Windows XP user who only sees green static type screen when viewing this short tutorial: http://www.abbcfellowship.com/Downloads/registration.mov
The clip was generated using iShowU. Does anyone know why and if I can fix it? I could offer a Flash Version as well, but QuickTime is supposed to be cross-platform. Thanks for any help! The video was captured at 30 fps, h.264 codec, audio at 20 Kz stereo.

I think its been answered:
Help!! How to Link users informations to user page???

Help for Windows 7 syncing of music through itunes

hi
I downloaded the software for media sync for my windows 7 laptop...
I tried to sync the music from itunes to my blackberry curve 8900, it actually synced without showing the syncing symbol... then when i tried playing the music, it said the media being played is an unsupported format. i cannot update my phone software on this new laptop either... Please HELP! =)

This symptom could be caused by an unusable iTunes configuration file. Follow the steps below to troubleshoot this issue.
Remove SC Info.sidb file
(This applies to Win7 or Vista)
From the Start menu, click Computer.
In the Organize menu, click Folder and Search Options.
Click the View tab.
In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
Click OK.
Navigate to the following location by either typing it into the address bar, copying and pasting it into the address bar, or clicking through the folder hierarchy listed: C:\Program Data\Apple Computer\iTunes\SC Info
Right-click the SC Info.sidb file shown and on the shortcut menu, click Delete.
Right-click the SC Info.sidd file shown and on the shortcut menu, click Delete.
Restart the computer and open iTunes.
If this does not work, repair your Quicktime - START / CONTROL PANEL / PROGRAM and FRAETURES / highlight QUICKTIME and click REPAIR

Plz help for set focus in the table column

hi
I have aproblem like i want that when i click on submit button aftr filling tables column value if there is any error the error massage displaying after that click on masaage ok button get focus of my cursor on the same column where i was not fill any value .
i am giving a piece of code also with this also
thanks in advance
else if(!checkResources())//check if all resource brackets are set
JOptionPane.showMessageDialog(this, "Resource Brackets are not correct or complete." , "Error", JOptionPane.OK_OPTION);
               //resourceTable.requestFocus(true);
          return;
private boolean checkResources()
try
               float number = -999999999.0F;
          float[] lowerRange = new float[ resourceModel.getRowCount()];
          float[] upperRange = new float[ resourceModel.getRowCount()];
          allResource.setVisible(false);
          overlapRes.setVisible(false);
          for( int i =0; i< resourceModel.getRowCount(); i++)
               if(((Boolean)resourceModel.getValueAt(i,4)).booleanValue())
                    lowerRange[i] = -999999999.0F;
               else
                    lowerRange[i] = ((Float)resourceModel.getValueAt(i,2)).floatValue();
               if(((Boolean)resourceModel.getValueAt(i,5)).booleanValue())
                    upperRange[i] = 999999999.0F;
               else
                    upperRange[i] = ((Float)resourceModel.getValueAt(i,3)).floatValue();
          for(int i =0; i<lowerRange.length-1 ; i++)
          {     int temp =i;
               for(int j= i+1; j<lowerRange.length; j++)
               {     if(lowerRange[temp] > lowerRange[j])
                         temp = j;
                    else if(lowerRange[temp] == lowerRange[j])
                         if(upperRange[temp] > upperRange[j])
                              temp = j;
               if(temp != i)
               {     float swapt = lowerRange[i];
                    lowerRange[i] =lowerRange[temp];
                    lowerRange[temp] = swapt;
                    swapt = upperRange;
                    upperRange[i] =upperRange[temp];
                    upperRange[temp] = swapt;
          for(int i=0; i<lowerRange.length; i++)
          {     if(lowerRange[i] != number )
               {     if(lowerRange[i] < number)
                         overlapRes.setVisible(true);
                    else
                         allResource.setVisible(true);
                    return false;
               number = upperRange[i];
if(number != 999999999.0F)
          {     allResource.setVisible(true);
               return false;
          return true;
catch(Exception e)
CAT.error("Error in checking wheather resource Bracket is complete or not",e);
return false;
this code belongs to action perform method....
the function for chek rong value is ritten insisde checkresources() function
plz help

plz help ASAP

Itunes help for Windows (Quicktime 7.1.3)

Hey all! I have been using iTunes for a while and have collected a big collection over the years.... When i was asked to download the new version of iTunes (Not 7 i think but a newer one) i acepted as i usually so. The installation did what it needed to do and i rebooted. When i went to play iTunes it told me i had an older version of Quicktime and i needed to update. I went to the iTunes website to see what i could do, found Quicktime (standalone) and downloaded it. Of course, it still dosent work . Does anyone have any ideas or has gone through the same thing? Thanks so much for any help!
By the way I'm not that great with computer talk so if you guys can dum it down for me that would be great

okay ... with the bug fixes in itunes 7.0.1.8, your installer may be interpreting the version of QuickTime 7.1.3 that came with that as a newer version than the standalone QT 7.1.3 (hence the message you're getting with the standalone QT installer.)
let's try an alternate technique to get a new quicktime in your PC.
go to your Add/Remove programs, select QuickTime, and select "remove".
then manually clear away any leftover QuickTime program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
now we'll do a repair install of itunes. go back to Add/Remove programs. select itunes, and click "change". select "repair".
the repair install of itunes should reinstall the correct version of QuickTime. restart the PC, and try launching itunes again. do you still get the message about QuickTime?

Time Capsule set up help for windows user

I have Windows-xp pro desktop and Linksys WRT54G wireless router, nintendo Wii & i phone both are connected to this router, I need advice on best possible setup for Time Capsule to print wirelessley and maximize my wireless range for wii & iphone. Kindly help me for best possible setup for me.

Since neither your iPhone nor your Wii support 802.11n, neither device will see a significant improvement in range with use of the Time Capsule compared to your existing Linksys WRT54G. The significantly increased range you can get with the Time Capsule is really only achieved when an n-capable wireless client connects to it.
To keep things simple, just configure your Time Capsule for "bridge mode" using the Airport Utility (click Manual Setup, Internet button, Connection sharing drop down box). Then cable one of the Time Capsule ethernet ports to a spare port on your Linksys router. Eventually, when you get n-capable wireless hardware, you can set them up to connect via the Time Capsule. All your b/g wireless clients can connect via the Linksys router. Irrespective of which device they connect to, all of them will be able to access the Time Capsule hard drive and attached printer.

I'm following Firefox Help for Windows XP on "clear cookies & cache." When I open Firefox & follow the Help steps (click on History, Tools, etc.) these aren't active links. I'm clicking on a Help display; no actions are executed. ???

(On desktop PC) When I open Firefox & follow the Help steps (click on History, Tools, etc.), these aren't active links. I'm clicking on a Help display; no actions are executed. Cookies & cache aren't cleared.

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"

Help for Windows 2000 user

I have Windows 2000, so I can't use iTunes. Is there any way I can get songs on my 3rd Generation Nano without iTunes

I had the same problem: new nano requires itunes 7.4, which requires windows XP or vista. I solved by installing Winamp, it works with the new ipod nano. I'm not using itunes anymore, but I plan to keep an eye on itunes updates, because I hope they will support Windows 2000.

Plz Help for nokia 5530 xpress music

ast day there is major problem that i found my nokai 5530.the two option Telephone and contacts that is show in screen can not work i mean when i touch the telephone option it can not show my phone dialup or Contacts In Menu they show contacts.i check my setting home screen but they only show contacts bar and the second one is not show i am using the latest firmare V11 and i reinstall my firmware but the problem is always found and the other think in my mobile work perfectly my touchscreen work fine i play music using camera recive calls every thing is ok.
i am a new user in your side.
sorry for bad english

1)brush up your english
2)reinsert the battery after 2MIN
3) try rest factory settings-pass 12345 if it doesn't work ...try hard reset *#7370*(makesure you do a backup 1st)
4)pray really2 hard that #3 works

Writing CSP (plz help) for windows logon

Similar Messages

Maybe you are looking for