Wrong information about new inc cartridge installed

When I intall a new HP original inc cassette (for example black nr 363) the computer shows that I must install a new cassette once more - either the inc writer shall "simulate" black and I must mark "continue" on the screen before the writer starts writing with all colours - and the test prints shows all colours including black in correct way.
I have also made a new instllation aof all inc cartridges after shutting down the writer (taken out all cables and inc) and also made "wasting" procedure and made new test prints that all are OK!!
What´´s wrong?
Mats Berg
[removed for privacy]

China Oracle wrote:
I'm a chinese in Dalian.
I want study from Oracle WDP in china.
I found a company which address like this 'http://www.dlocp.com.cn/' ,they said that they can take the 'OCP' education and exam,but i search 'Institution Name Department Name Location ' from 'https://workforce.oracle.com/pls/wdp/rd_psp_find_member0',i could't found anymore in it.
It's not really ? or the 'Search Member' update lowly?
Thks for everyone who can tell me!
Thank you!It seems to me that verifying legitimate workforce training remains a headache, especially for some countries:
for india [http://www.oracle.com/education] - training locations - [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=317] gives good results, for others countries (and I believe this includes China) it doen't.
Sometimes [https://workforce.oracle.com/pls/wdp/new_home.main] provides reliable results, sometimes it doesn't.
The best course of action is to try and contact the workforce development programme contact for China - See [https://workforce.oracle.com/pls/wdp/rd_psp_contact]
Notes:
- There was a case in India recently of an Institution claiming to offer it was even a Oracle Authorized Edcuation Centre when it wasn't, and I believe it was force to remove its logo's tc.
- It's not really any concern of mine, but I find it annoying/frustrating/unethical that Workforce Development Programme to not seem capable of understanding the importance of maintaining a reliable check so potential students can reliably check a training location is legitimately offering training. Legiimate students can lose out and Oracle itself loses out - only fraudstaers gain (Workforce is not connected with the Certification team)
- It is perfect possilbe to receive education on Oracle from any institution not using unauthorized training materials, however this training will not count towards hands on course requirements.

Similar Messages

My eprinter will not print in proper clolour even after new ink cartridges install cleaned nossles p

my eprinter will not print in proper in colour even after new ink cartridges installed cleaned nossles as new cartridges still not printing properly
This question was solved.
View Solution.

Which printer do you have specifically? HP makes several eprinters and I want to make sure I get the best information for you that I can.
Also, have you tried doing a self test print to see if the issue is hardware related versus being software related?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

N73 doesn't inform about new mail??

I have a Nokia N73 and it's firmware is v 4.0726.2.0.1 26-06-2007. I have set up a IMAP email account and I have automatic email check turned on. When email arrives phone will not inform about new mail. What's wrong, anybody know?
-mika-
Nokia N73

Well I have changed my N73 to N95. But I didn't fix the problem. My email worked well on N73. Only problem was the "new mail" information. Have you got correct email settings?
-mika-
Nokia N73

How do I get information about new legal requirements?

Hi
We are 4 people in a company that has 39 active company codes in about 25 countries. How can we subcribe to whenever SAP releases new reports that meets legal requirements in specific countries? Some of our companys have their bookkeeping taken care by a neighboring country, so the bookkeepers would not know if there is a new report released from SAP. So how can we get information about new reports without having to read throug all the release documentation?
Hope you can help
Jens Bald
IC Companys
Denmark

Hello Jens,
this is a real problem.
What is my experience? The first priority is: try to use the SAP Standard as far as possible. No user-defined reports, no exits. Try to be always up to date with hotpackages.
A further help for me are the userforums here. If you have five minutes left, just have a look at all the questions and answers.
I know, there is a lot of stuff to read, but the releasenotes have to be checked. Unhappily I didn't find another way.
Sometimes SAP reacts just in time regarding new legal requests - and I can understand this. At least I have to say: It is not possible to manage this without having any support from the accountancy side. This enables you to search for this requests - instead of reacting.
If a country changes statutory requests regarding taxreporting or new taxtypes, changing of rates the guys from local accountancy ought give you a hint. Because they get this information at first.
I made good experiences with internal accounting forums or user groups (i. e. northern countries, westeurope, USA, southeurope).
Maybe it gives you a little help and I am very interested in all the answers to this thread.
Best regards
Horst

Re: Not printing black ink after new ink cartridge installed (HP Officejet Pro (edited)

Well 1 to 2 years later I have the exact same problem described by the posters with my OfficeJet 4020. My black printing started to deteriorate as the cartridge went empty, put in the same HP cartridges I have been buying at Costco since I bought the printer there 2 years ago, first new black cartridge printed poorly then just started to come out blank as described above. Put in second new cartridge Also ran all the cleaning and alignment tests and functions. no improvement and no malfunction found. While doing this I used up the three color cartridges which printed okay, it was just the black. Even went out and bought a third new cartridge from Staples to make sure the Costco ones weren't just bad. This HP replaced a Canon that lasted for ages and it's a problem already.
Did anyone ever find a solution to the HP black cartridge blank printing problem?

What is the model of your printer - there is not an Officejet 4020 that I can find. Is your model an Officejet 4620? If so I suggest you call HP support regardless of warranty as described in the post here. If you are in the US call 1-800-HPINVENt, elsewhere see the contact information here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

New ink cartridges installed

I have installed all new HP940 ink cartridges color and black. It is telling me ink is low and won't print.

Hi @NAN7541,
Welcome to the HP Forums!
I understand that your HP Officejet pro 8500 printer is saying your new ink cartridges are low and will not print on Windows 7. I am happy to help!
I would suggest to go through this guide, Fixing Print Quality Problems for the HP Officejet Pro 8500 All-in-One Printer Series (A909).
If the guide does not resolve your issue, then please call our phone support at 800-474-6836 for your replacement/upgrade options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How to get informed about new features and version...

Hello,
I used to get informed on skype when a new version is launched, but now I dont. I noticed it when I delete skype and re-install again from the site for a reason. Also I want to learn about the new features via e-mail. What should I do?
Regards

To manually check for new updates, you can click the Check Update option in the Help menu in the Skype software window. Then if there are new versions released and you want to know what new features are added in that release, you can check the Skype Blog's Garage section -
http://blogs.skype.com/category/garage-updates/
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

HP B210 all-in-one Photosmart Plus won't print black when new black cartridge installed!!

Ugh!! This printer is driving us insane! EVERY time we install a new black ink cartridge (HP 564) the printer decides it doesn't want to print black any more! I've tried the whole cleaning this and that they say is needed. I've aligned, reset, etc. and nothing works. What makes me mad is the printer works fine until the day we swap out the black ink. I've had this issue before but it was random luck it came back to life and we have no idea how it happened. What can we do to fix this ANNOYI NG problem?? Thanks in advance.

SaraLV wrote:
By the way: after this whole conversation, suggesting the standard troubleshooting steps is RIDICULOUS.That might be true if one could assume that someone posting in the thread has already read (and tried) the posts in the thread. My experience is that there are many folks that find a thread, perhaps through a Google search, but they do not actually read the thread but rather put their information on the end of the thread as a reply. I see this even when there is a solution marked for the thread, the thread here is a good (or bad) example of this. For your case have you tried the standard troubleshooting steps? Did you check the vents? Did you try soaking the printhead as described here? Is there any sign of black printing at all in the test page?

Not printing black ink after new ink cartridge installed (HP Officejet Pro L7555)

I have an HP Officejet Pro L7555 on which I just replaced the black ink cartridge. Now it won't print in black at all. I have tried cleaning the printhead multiple times to no avail. I only get printouts of boxes in all colors except black and nothing else written on the page at the end of each printhead cleaning cycle.
When I print the Self Test Diagnostic Page, it comes out in Magenta instead of black. On this page, it shows that both printhead are in good condition. The ink level on the black ink cartridge is shown to be full as would be expected for a newly installed cartridge.
I have replaced other cartridges on this printer before, and have not had this issue. Could anyone please help?

Thanks, garytech1. I have seen the document.
Solution 1. I have used and am using only genuine HP cartridges. The one I recently replaced was black. I have replaced the other colors before without problems.
Solution 2. I am using the correct type of paper. There are no streaks on the printouts. Any printing I try from a document with black text comes out blank. The only two types of printouts I have obtained are:
a. The Self Test Diagnostic Page, which comes out in magenta and it has no streaks. It also lists the status of the printheads as being good.
b. The printout that follows a printhead cleaning that has all color boxes except black. There are no streaks here either.
Solution 3. I have checked the print settings (I have Windows XP SP3) and they are all correct.
Solution 4. I have printed the PQ Diagnostic page and it is all blank except for some colored boxes. There are no streaks in them. No grey boxes appear.
Solution 5. There is nothing wrong with the images or documents I am trying to print.
Solution 6. I don't see why I should have to spend $70+ to replace the black/yellow printhead when:
a. The yellow color comes out fine in the colored boxes
b. All the diagnostics (the ones that are in the installed software as well as the ones I obtained from the HP website) all show the condition of both printheads to be good, and
c. When all printing was working just fine before I replaced the cartridge. Is there a physical way to clean the printheads since it appears from all of the above that it is the genuine HP ink that may have actually plugged it up?
Thanks for your help!

Won't print alignment page or any page after new ink cartridges installed.

I just installed a new color and a new black ink cartridge into my HP Envy 5531. I have never had an issue with this printer before, owned it for 2 years. After installing it, it tells me to print an alignment page, I press ok. The alignment page comes out only blank. So they cannot scan the alignment page. Now my printer prints like it's running low on ink, but it says that it's full with color and black ink.

Hi @Aly9008,
I would be happy to help you work towards a solution. I understand you have installed new cartridges, the levels are good (full), but your print quality is poor. Please use the following document to troubleshoot the issue; Fixing Print Quality Problems for the HP ENVY 5530 e-All-in-One and Deskjet Ink Advantage 4510 e-All....
If the issue persists, I suggest calling us. Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. We will, at our option, either replace products under warranty that prove to be defective or refund the purchase price.
We could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
The number to call is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
Please use the thumbs up below if you happy with my efforts to help. Best of luck!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Help after new printer cartridges installed

I just replaced both cartridges on the HP Photosmart C5280 All-in-one and all I get is a flashing yellow !, and the message refer to printer documentation. I have replaced cartridges before and never have had this problem. What does this mean? What do I do to fix it. Just want to print something ASAP.

I installed a new hp Magenta cartridge, but I get a message that says: "To print in color, install the following cartridgees: Magenta...." I tried to unplug the printer and plug it back in, but that didn't work either.

In 3210xi, new cartridges installed, but yellow not recognized

3210xi will not recognize new yellow cartridge. All cartridges are new HP cartridges, but yellow keeps indicating "missing or damaged." Have followed cleaning instructions. Same result.

Hello there! Welcome to the forums!
@annoyance
I understand you have all new HP cartridges installed in your Photosmart 3210xi however, the yellow is not being recognized and you're seeing an error message stating the ink cartridge is "missing or damaged".
I wanted to reach out and share my suggestion with you. After looking through troubleshooting guides, I would recommend that you try the steps entailed in this specific document.
The Following Ink Cartridge(s) Appear to Be Missing or Damaged' Message Displays after a New Cartrid...
If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Wishing you a great weekend!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

RSS feed just providing information about security updates & new versions of firefox

Hey all
Didn't find any RSS feed which provides just information about new security udpates and versions of firefox.
Does there exist any?
Thanks for you help
Greetings,
Stefan

http://blog.mozilla.com/feed/

Wrong information provided

Serial No. :- [text removed for privacy]
Product No.:- WZ040PA#ACJ
I bought a Compaq laptop for personal use, but before buying i called Compaq customer care and asked about the laptop, they suggested me Compaq 620. I inquired about the laptop they gave me the information about the system, as per the info. provided i bought the laptop on 30 Oct, for it i paid Rs. 28500 and i founded that the information provided was absolutely wrong. They just gave the wrong information about the sound, they told that it is a dual-speaker and consumer laptop but after bringing the system home i founded that its sound is very low, when i complaint it to hp technical department they told me that its a mono-speaker and commercial laptop. I complaint them that they provide me wrong information about the system and due to them i am facing problem, i ask them for a solution for the same but they just ignored everything and try to ignore my problem.I am very unhappy with these things that's why i am complaining you for the same, I want that they should change my laptop and provide me the required laptop as per my configuration.
Thank You.
Mimoh Jindal

Sir,
   On 30th october, i bought a laptop (Model:- compaq 620).Before buying i enquired about this model of laptop from your customer care, they told me all configurations including dual speakers and consumer range-laptop, after so much enquiries i purchased the same model from a authorised dealer in New Delhi. The system was sealed and was dos based, no window was their. When i brought the system to home and loaded the window, i was shocked listening the low voice of the system, so i complianed for it to your technical department but they told me that it is a commercial range-laptop with mono speaker and told me that its voice is that much only.
   So, i was misguided from your customer care and cheated for buying this product, when i told the technical department about this(misguidance and cheat), they just simply ignored all and refused to help me at all. They totally ignored the matter.
   I just want my laptop to be replaced, but the denial of your technical depratment in this regard is compelling me to go to consumer forum. I am just informing you before my this legal steps to be taken in case the further ignorance is continued.

Info. about 27 phases while installing patches in erp

Hi,
I want some information about 27 phases while installing patches, plz send list of phases asap.
Thanx and regards,
hari

I would Google/search on SDN with query for more information.
Read and follow the Forum rules
Search SDN/Google before posting your query

Wrong information about new inc cartridge installed

Similar Messages

Maybe you are looking for