Wrong posting key in accounting entry for GR
Dear Experts,
We maintained sales tax at item condition in PO. System create accounting entry the moment we did GR via MIGO. We noticed that the wrong posting key for sales tax entry taking place.Below I stated the Sales Tax entry that currently exist for GR.
2320111100 50 PUR FG LE - STAX 417.10500- MYR GR
3330001610 40 OPGG - ACRL SAL TAX 417.10500 MYR GR
It suppose vise versa. It should beas stated below;
2320111100 40 PUR FG LE - STAX 417.10500 MYR GR
3330001610 50 OPGG - ACRL SAL TAX 417.10500- MYR GR
Can anyone tell me how may I set this in OBYC. I believe the posting key should change so that the accounting entry will correct but I dont know how to set this. Please assist me.
thanks.
rgds,
nantha
Dear Experts,
Appreciate if you could brief more in details how may I set the correct posting key for request in OBYC. This is 1st time I'm going to do this changes. TQ.
rgds,
nantha
Similar Messages
-
Wrong Accounting Entry for Rejection Excise Invoice through J1IS
Dear Experts,
When we are doing Rejection of Excise Invoice through J1IS, a wrong accounting entry is getting generated by system.
Where can I check the settings for Accounting Entry for Rejection Excise Invoice?
Thanks & Regards,
ReshmaGenerally Excise Invoice for other invoice posting will be done through J1IV after creating Excise Invoice for other Movements in J1IS.
If Automatic Posting is activated against your excise group then you need not again to post J1IV. It happens along with J1IS.
By the by how you are returning Excisable goods through Return delivery with Original invoice 122 or through Return Purchase order 161 Movement type.
Have you entered Excise Rates BED, ECS and SECS in J1IS?
Elaborate in detail. -
Manual Bank Statement (One entry posted with wrong Posting Key)
In The Manual Bank Statement, the user has posted one entry with wrong posting key, How can that be rectified? Or Is there anyway wherein the entire statement can be reversed?
Hi,
The standard document change rule will never allow to change the posting key irrespective of the transaction being used.
You can use program RFEBKA96 to delete the statement so that you can post the same statement.
If document generate with wrong posting key can be reversed through regular FB08
Regards,
Chintan Joshi -
Error in determining posting key T030B account key JP7
Hi
While I am running MIRO, following error comes.
Error in determining posting key T030B account key JP7
Message no. FF701
Diagnosis
No posting keys could be found for the account key defined in the tax calculation procedure.
Procedure
Check the following settings in taxes on sales/purchases Customizing.
To do this, choose Maintain entries (F5):
1. Check or correct the calculation procedure.
2. Check whether you have specified a valid transaction key in the tax type used.
If it is a new transaction key, you must first define the posting rules. Enter the transaction keys in the calculation procedure
Can u please advise me where I have to make changes in my config.
RakeshHi ,
this error is coming because transaction key JP7 is not maintained with respect to posting keys .
In SE16 open table T030B and maintain transaction Key JP7 with posting keys then hopfully ur error with get removed.
thanks
deepa -
Unable to capture & post the bill of entry for cvd & additional duty
Dear cons
In case of Import Pos CVD and additional duty is getting inventorised and GR/IR-CVD is getting credited as the time of GR.Whereas CVD and additional duty is a cenvatable tax and should be accounted at the time of Excise posting.Also we are not able to capture and post the Bill of entry for CVD and Additional duty.Hi..........
Pls ensure tht u hve done the configurations in Logistics General - Tax on Goods Movements.
And also ensure the u hve assigned the G/L account for CVD.
Still if u hve the prob let me know.
Regards
Durga -
Accounting Entry for Depot Excise Invoice
Hi Gurus
We make a STO from factory to depot. I have posted the depot excise invoice via J1IJ but Im unable to see the accounting entry for the excise invoice..
Im able to see the acounting entry for excise invoice for factory sales thru J1IIN..
Pls advise
Rgds..VinzHi Vinz,
I would like to explore more for ur info.
When u create Excise invoice at Factory Using J1iin, accounting entries flow to the system. When u transfer it to Depot, u credit the Excise amount using MIRO and post it to RG23D ( Depot Register)
The value of the excise for which u have taken credit from ur factory would be passed on to customer now.
If you notice carefully, when u take credit of Excise entry in RG23d No accounting entry flows in the system, only value & qty gets updated to Register.
Generally, while deciding the selling price from depot u consider Basic price + Excise duty. since u are passing on the excise benefit to customer, using proforma excise invoice (transaction J1IJ)
So there is no wuestion of accounting entries.
Hey CIN Gurus.. correct me if i am haveing any misconcepts regarding this.
Hope this is clear to you now..
Reward if helpful.. -
Accounting Entries for Materials Return from Production Order
Dear Gurus,
I have a scenario here that a raw material, valuated at moving average = 151 and qty = 100, was issued to a production order last month. Due to some issue the order was not completed for a while and 93 qty was consumed for the order and because the remaining 7 were excess they were returned to the storage location. By that time the MOV had changed from 151 to 185 and the 7 qty was returned not at 151 (which would be correct) but at 185. This is a wrong accounting entry as it is showing an under consumption for the order.
Anyone have an idea why the system is doing this because the material should be returned on the price it was issued at so that the accounting entries are knocked off (The accounting entries for return deliveries to vendors are of the same price that they are recieved no matter how ever long a period they are returned). How do we stop the system from doing so and if it cannot be done what is the solution to the scenario.
Regards,The normal entires are as follows (depending on your configuration);
1) Goods issue;
Credit inventory and debit COGS;
2) Billing document;
Debit customer account credit sales accounts;
3) Payment;
Credit customer account and debit cash/ checking account
pls assign points if helpful as a way to say thanks. -
Reverse posting key specification is missing for posting key 80
A FI document was wrongly posted with posting key "80" instead of 40. And now we are not able to reverse it. System is giving following error --
"Reverse posting key specification is missing for posting key 80"
Document posted as
50 207200 CASH - MAIN-O.H. 762.00-
40 410120 CONVEYANCE EXPENSES 702.00
<b>80 402440 STAFF WELFARE EXPENS 60.00</b>
Please suggest
Thanks & RegardsHi,
Go to OB41, select the posting key 80 and in the third tab "Other attributes" mention Reversal Posting key. Like you can observe for posting key 40, reversal key 50 would have been assigned.
Pl assign points, if helpful. -
Accounting Entry for Material has Standard Price
Hi,
If Material has standard price option, what is the accounting entry for the time of Direct Goods Receipt and from the production.
Material Value is : Rs. 100/-
Purchased value is : 90/-
from production : 110/-
Thanks in advanceHi,
In STO, material posting with price valuated from issuing plant price. In your case, the transportation cost, you can capture to separate G/L account and pay to transport vendor.(In STO , one plant is vendor and another plant is customer, so a third party vendor involved for material transfer)
OR else use separate own Custom Condition Type with Special Condition Category instead of condition type P101 which have Condition Category "G", only responsible to pick the internal price
Regards,
Biju K -
Accounting entries for Foreign currency revaluation..Accounting entries
Dear All,
Can any one tell me the Accounting entries for posting foreign currency and foreign currency revaluation..
Regards,
Suresh Patipati.
Edited by: suresh patipati on Feb 17, 2009 7:45 AMHi,
I will mention entries from Vendor point of view on that basis you can get the idea.
1. If there is a Unrealised loss.
Unrealised loss A/c...............Dr.
To Balance Sheet Readjustment A/c......Cr.
2. If there is a Unrealised Gain.
Balance Sheet Readjustment A/c......Dr.
To Unrealised Gain A/c.....................Cr.
3. If there is a Realised Loss.
Realised Loss A/c......Dr.
Vendor A/c.................Dr.
To Bank A/c.......................Cr.
4.If there is a Realised Gain.
Vendor A/c..........Dr.
To Bank A/c....................Cr.
To Realised Gain A/c.......Cr.
Best Regards,
Shridhar -
Dear Guru,
When we are doing MFBF ,GI accounting entry is getting generated but the GR accounting entry for mvt type 131 is not
getting generated instead its going for mvt type 571.
Thanks in advance.Hi Kamala,
In the case of sell in the above example, Dr forex postiion account with 100$, but it is essentially Eur 94 and the corresponding amount in local currency which is USD in your case. If at all it happens that you are selling EUR at the market rate itself such that your amount in local currency for EUR sale and the amount in USD for Buy are same, then there will no gain/loss.
But essentially your contract price will be different than the prevailing market price. In that case there will be gain or loss posted.
Regards,
Ravi -
Accounting Entry for Outgoing Payment
Dear experts,
I am currently doing PLD for outgoing payment. Just want to know how I can include in the disbursement voucher I am doing the accounting entries for this., Example:
Accounts Payable (Control Account) 20,000.00
Cash in Bank MBTC (GL account of the chosen Bank account) 20,000.00
Thanks
SandraYou may check this thread to have a reference:
Re: Branch Code in a bank transfer summary report
Thanks,
Gordon -
How to stop Accounting Entries for certain Movement Types
Hello,
We are using Movement Type 511 to record free of charge receipts from vendors. Still it is generating Accounting Entries with Standard Material Price.
Is there any way to stop Accounting Entries for 511 and other Movement Types, where external business partners are involved ?
I tried IMG Setting "Define Account Grouping for Movement Types", where I did not tick in the field "Value Updates". But it did not work.
I believe, Account Grouping settings at the level of combination of Plant and Material Type takes precedence. There I have ticked in the field "Value Updates". So even if create a new Movement Type, with no tick in the field "Value Updates", it creates Accounting Entries for free of charge receipts from vendors.
Is there any way to stop any accounting entries in such cases ?
Basically I want 311-like movement type, but where external business partners are involved.
Thanks and RegardsHello,
Thanks to you all for your quick reply.
I created a new Movement Type - copied it from 511 and made the changes as per your suggestions - disabled field "Value Update" in "Update Control / WM Movement Types".
Using MIGO when I try to receive the material, it gives me error "Update Control of Movement Type is Incorrect"
Any reason for this error ? I have disabled even "Check Account Assignment" in Account Grouping
Thanks and Regards -
Error in determining posting key T030B account account key JP5
Dear all,
at the time of MIRO posting error msg comes
error in determining posting key T030B account account key JP5
Pls guide me
Thanls
aminHi
Give the Debit as 40 and Credit as 50
To find the GL code, go to FS00 and give ur company code and get the GL code and assign the same OB40
Regards
Prasanna R
Edited by: Prasanna Raju on Jun 25, 2009 12:35 PM
Edited by: Prasanna Raju on Jun 25, 2009 12:36 PM
Edited by: Prasanna Raju on Jun 25, 2009 12:36 PM -
Error in determining posting key T030B account key GT0 Message no. FF701
While doing MIRO i am getting this error
Error in determining posting key T030B account key GT0
Message no. FF701
I dont know y..can u pls help me on this?Hi
Try this
This error is coming because transaction key GT0 is not maintained with respect to posting keys .
In SE16 open table T030B and maintain transaction Key GT0 with posting keys then hopfully ur error with get removed.
Goto to SE11 put the table name T030B enter then click on change button select transaction type GT0 Maintain Debit 40 & Credit 50.
go to OB40
here find the GT0 key double click on it and then maintain the posting key
Maybe you are looking for
-
Automatically connect to Wireless
I have a network profile setup in ReadyCom 4.0 for my home wireless network, however everytime I reboot, I must go into the ReadyCom software and choose to connect using the profile. What is the easiest way of making my ideapad always connect to my
-
Adobe After Effects CS6 Ram Preview Crash Problem
Hey, Recently my AE cs6 has been crashing when I started to RAM preview and the message that shows up is. "After Effects error: Crash In Progress. last logged message was: <1948><ai.blit.pipe><2> HardwareBlitpipe Disenaged." Specs: AMB 8150 16 GB of
-
Premiere Pro Project loads then immediately shuts down
I have a large Premiere Pro CS4 project which is completed and has written a standard DL DVD but I now wish to incorporate it into a Bluray DVD. I have had numerous problems doing this but the system which has worked well so far is to load the PP pr
-
Does anyone know if COREid 7.04 supports netscape 7.x? Also is there a document that outlines the support for browers and operating systems? Thank you, Allison
-
Running a mic through a USB interface: stereo
Another question from me, I just purchased an M-Audio Fast Track USB interface, and no matter whether I press the stereo button or not, it only records in mono. I think I've skipped a step, is there any common problems I may have? Thanks.