WRT610N v2 peer to peer problem

I just bought a router because my other old one had this problem with peer to peer transfer so I call linksys and they said they can't do anything so i read guides for port forwarding and for about a year i been trying to get the router to work with peer to peer transfer like the downloader for world of warcraft and bitorrents and it wouldn't work so i bought a new router the WRT610N v2 one and i have the same problem i tried the same things on the new router and nothing i hope you guys can help because this is really annoying thanks

It is not your router that is causing the problem. It is your ISP that is slowing down your transfers. If you call them, they will deny it.
Greetings from Northern Ontario, Canada

Similar Messages

Iphone 5 connection reset by peer problem

Hi all,
I encounter "Connection reset by peer problem" when i try to login facebook using Iphone 5. I've even reset network setting but it doesn't help.
Any solution? Please advise.
Thanks.

That sounds like a problem with the Facebook servers.

Connection reset by peer problem

I have the following code, and every time I run it i get a "java.net.SocketException: Connection reset by peer: socket write error" exception. Why is that? This is the first time I'm writing a network client application, so please help :)
Socket s = new Socket("127.0.0.1",8080);
OutputStream out = new BufferedOutputStream(s.getOutputStream());
InputStream in = new BufferedInputStream(s.getInputStream());
out.write("server status\r\n".getBytes());
//out.flush();
StringBuffer responseLine = new StringBuffer();
int c;
while(in.available() > 0) {
c = in.read();
responseLine.append((char)c);
//out.close();
//in.close();
//s.close();
System.out.println(responseLine.toString());P.S. It's the same problem with or wothout the out.flush(), and with or wothout closing my streams and socket.

InputStream = new BufferedReader
Um..just look at that code, oh boy.
InputStream is a class and so is
BufferedReader
Two different classes (event if they are subclasses)
cant be directly assigned to each other.The human eye sometimes sees what it wants to see and not what it is... :-)
I think the problem is with the protocol and the timing. The while loop may never execute due to timing:
1. Client's "server status" request takes a few ms to arrive in the server.
2. In the meanwhile, in.available is zero and the client does not enter the loop and does not append any characters to the string buffer.
3. Server writes its status on the socket which arrives at the client which is no longer reading it a few ms later.
Which brings us to the protocol:
If the server status is a fixed length block of data, try reading it into a single byte buffer.
If it is variable length or text, use a BufferedReader on the socket, read the response a line at a time and make the server end the report with a token (like a last line of "END_OF_SERVER_STATUS_REPORT" or "01234567890123456789012345678901234567890123456789", whatever).
Don't check if data is available on a socket if you know it should be, sooner or later, and you don't want to multiplex your flow on data availability.

IOS 15.1 POTS dial-peer problem

Good day!
After updating to IOS version 15.1(4)M6 there is a problem with outgoing calls through the PRI.
Router configuration in the attach. On the gateway turned on debugs:
sho debugging
The following ISDN debugs are enabled on all DSLs:debug isdn error is ON.
debug isdn q931 is ON. (filter is OFF)
DIALPEER:
debug voip dialpeer error call is ON (filter is OFF)
debug voip dialpeer error informational call is ON (filter is OFF)
debug voip dialpeer error software is ON
debug voip dialpeer error software is ON informational
debug voip dialpeer function is ON (filter is OFF)
debug voip dialpeer inout is ON (filter is OFF)
debug voip dialpeer detail is ON (filter is OFF).
The result of debug also in attach.
On CUCM 9.1 configured SIP trunk to this gateway. When I call the test number 89261234567 I hear a busy signal. If I upload this version 12.2(24)T6, with exactly the same configuration, everything works successfully. Accordingly some problem lies precisely in the new IOS. Please tell me to what may be the case.
Thank you!

Hi Filipp,
As Deji correctly guessed, the call is disconnected because of the Toll Fraud prevention.
*Feb 4 15:35:26 MSK: //1/6FAB58800001/CCAPI/cc_process_call_setup_ind:
>>>>CCAPI handed cid 1 with tag 101 to app "_ManagedAppProcess_TOLLFRAUD_APP"
*Feb 4 15:35:26 MSK: //1/6FAB58800001/CCAPI/ccCallDisconnect:
Cause Value=21, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
you can add the IP addresses of CCM servers from where the calls are originated under
voice service voip
ip address trusted list
URL for your reference: https://supportforums.cisco.com/docs/DOC-12228
Please rate all the useful posts

Peer to Peer problems

I have just switched from Sky to BT broadband, I was getting 4.5mb/s download on p2p, now getting 10kb/s!!
Any ideas?
Cheers

P2P is throttled on BT broadband at peak hours (usually 4pm to midnight). It's in the terms and conditions and you can read the actual policy here.
Best thing to do is set it away over night OR find an alternate way to download. Google is your friend.
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

Always suffer "connection reset by peer" while performing software update

Hi all,
I just bought a brand new macbook air. The first thing I do for this laptop is to perform the software update. It suffered me for a long time that I always encounter the error message
"Connection reset by peer The Installer package has been moved to the Trash. To try again, open the package from the Finder"
For some update that the file larger than 10Mbytes, the error is very easy to occur. I will be ever lucky that I could download the update package for larger update file.
I can make sure that my network to wireless route is well as I could download 500Mbytes file manually from internet without any problem. Actually, I had downloaded the mac X OS 10.5.4 package manually and upgrade the system from 10.5.2 to 10.5.4 as it is almost impossible for me use "software update" to download about 500Mbytes without "connection reset by peer" problem.
Any input is appreciate.
Thanks.

I have the exact same problem , can any one please help with this
Thanks

Linksys WRT610N V2 problem please help me

i have Linksys WRT610N V2
now i got problem the power light flashing still keep
cannot use but wifi and wan and lan no light but 1 light power only still keep power flashing blinking no stable why
how to fix please help me
now i using adsl modem direct connected i using linksys am300 adsl modem

Your firmware is corrupt with a flashing power light. Follow one of these two to restore your router.
http://www.savemondo.com/2008/11/21/how-to-unbrick-a-linksys-router/
or
http://www.lancelhoff.com/how-to-fix-a-bricked-linksys-router/

WRT610N V1 - Solution for not connecting iTunes to Apple TV

I have a solution for anyone with a WRT610N(V1)who is having problems (BTW this will work with V2 router also). I could not connect my iTunes to my apple TV, or it would appear fleetingly. Same problem using my iPad as a remote.
The issues you are having are to do with the firmware. Last year Cisco stopped performing firmware updates for version 1 (V1) of their router and fixed all your/my issues for their Version 2 router (V2) [Look on bottom of your router for version number - it is after the model number].
The fix, as obvious as it might be, is to load the V2 firmware on your V1 router.
Firstly go to the Cisco download page for the WRT610N router (http://homesupport.cisco.com/en-us/wireless/lbc/WRT610N/download)
Select Version 2.0 as your model (yes I know this is wrong and will make you sweat a little)
Download firmware upgrade to an easy to find location on your computer (I used desktop). You will now have downloaded file FWWRT610N_2.00.00.05_20090710code.bin.
Go to your router admin function (if you don't know, just type 192.168.1.1 into your browser) Default User ID is admin and leave password blank.
You will now see the Linksys router administrative application.
Click on "Administration"
After you have done that you should see "Firmware Upgrade"
Click on "Firmware Upgrade"
Select the file I mention earlier from the location to which you downloaded it.
Allow router to upgrade (you do not need to do anything to router once it is finished).
Go to apple TV and bask in the fact that you now have a fully functional apple TV with iTunes happily available.
I am sorry if these instructions are a little simplistic, but I wrote them trying to help anyone who is used to just opening a box and ignoring the manuals (like me!)
Good luck and Merry Christmas

Solution for people who have linksys WRT610N. I hope you find this and it helps!
The Grendel!

WRT160NL DLNA Server Problems

The built in DLNA server of WRT160NL (firmware 1.0.02), which is TwonkyServer 4.4.17, has the following problems and limitations based on my three months testing:
1. The DLNA server is unstable, very sensitive to files not detected as streamable media files. In that case file names and file contents are strangely mixed.
2. There is no accessible log file, where one can find the problems of the DLNA server. TwonkyServer has a log file, but its access is disabled by Linksys.
3. The original config web page of TwonkyServer can not be accessed, it is disabled by Linksys. So one is not able to fine tune the DLNA server, and not able to access the features of TwonkyServer.
4. Some features of TwonkyServer are disabled, for example internet radio.
5. When the DLNA server scans and indexes the meda files, the WAN (internet) can not be accessed. And indexing takes a lot of time.
6. Video / movie thumbnail images are no supported, so one's children can not choose from the tale movies by coverart.
7. The built in DLNA server (TwonkyServer 4.4.17) is out of date, the latest TwonkyServer is 6.0.23.

WRT610N maybe have the samme problem, Media Server USB HDD
Ex, if you edit a playlist *.M3U and do a manuell SCANNING it will recogized the different (because the date is diff ?) If you edit again and make a second scanning (samme date) the playlist dissapear and IS GONE until you reconnect the Hdd or renamme the playlist.
EX2 : A file named   13 - Ricky Martin - Livin La Vida.mp3 and you renamme it 12 - Ricky Martin - Livin La Vida.mp3 the file is gone from Media Server !
Normal use, you add a file , NO problem but it seams getting confused when you edit/renamme/move files.
I solve it like this EVERY TIME -
Disabled Media Server
Rename media folder
Enabled Media Server
Scan the renamed folder
It works   !
Using WRT610n Firmware Version: 1.00.03 B15
WD 1TB USB HDD with powersuply

Cisco WAP4410N - not configurable as Wireless Client with WRT610N?

Hi!
On several workstations I use multiple network to
1 - access Internet and share Printers
2 - communicate within the local area
The second WLAN I need for several NDAS devices.
Due to their own LPX-Protocol these NDAS devices don't work properly with MAC address cloning. In combination with several access points or clients from other manufacturers Wireless N transmission does not work.
So in WLAN 2 I use the Cisco Linksys WRT 610N Router with 2.4 Ghz WLAN.
I intended to use the Cisco WAP4410N in Client Mode to connect a workstation with this router and set up NDAS connection.
Other workstations will directly connect to the router via Cisco Linksys WUSB-600N.
The connection from WUSB-600N to WRT610N works perfectly.
My problem is:
The WAP4410N does not connect to a wireless Network in Client Mode.
(It is not a problem of Channel configuration, Security or Signal strength - because if I connect my workstation via WUSB-600 this works instantly.)
If setup as an access Point it will start up sending competing to my router.
In Network Status it shows no received packages.
In Wireless Client/Repeater Mode there is no connection either.
My question is:
Is the WAP4410N not designed to be used as a Wireless Client?
An if it was - how is it to be set up as one?
Thanks
ando_user

Hi!
On several workstations I use multiple network to
1 - access Internet and share Printers
2 - communicate within the local area
The second WLAN I need for several NDAS devices.
Due to their own LPX-Protocol these NDAS devices don't work properly with MAC address cloning. In combination with several access points or clients from other manufacturers Wireless N transmission does not work.
So in WLAN 2 I use the Cisco Linksys WRT 610N Router with 2.4 Ghz WLAN.
I intended to use the Cisco WAP4410N in Client Mode to connect a workstation with this router and set up NDAS connection.
Other workstations will directly connect to the router via Cisco Linksys WUSB-600N.
The connection from WUSB-600N to WRT610N works perfectly.
My problem is:
The WAP4410N does not connect to a wireless Network in Client Mode.
(It is not a problem of Channel configuration, Security or Signal strength - because if I connect my workstation via WUSB-600 this works instantly.)
If setup as an access Point it will start up sending competing to my router.
In Network Status it shows no received packages.
In Wireless Client/Repeater Mode there is no connection either.
My question is:
Is the WAP4410N not designed to be used as a Wireless Client?
An if it was - how is it to be set up as one?
Thanks
ando_user

External PSTN calls are not making it to CUE voicemail?

External PSTN calls are not being forwarded to my Unity Express Voicemail. Internall calling and forwarding to Voicemail is working like a charm. However, calls from the outside just busyout after so many rings and never make it to voicemail.
Can some one help point me in the right direction. I think it might be as simple as dial-peer problem.
Thanks in advance,
Curt

I'm assuming this is CME-integrated. Basically, if you have a PRI connection, the easiest thing to do is to do a 'debug isdn q931' and check out the called number. Or if you have an FXO connection to the PSTN, then you've got some kind of 'connection plar' under the voice port to give you the called number. Basically the called number must match a destination pattern under a voip dial-peer pointing to CUE (you can use 'debug ccsip message' and look for an INVITE message to see where it's going to). Next, it has to match a trigger ('show ccn trigger' in the CUE CLI) to envoke a particular application, such as voicemail. If you have trouble, what we'll need to see is the exact called number (either via the isdn q931 debug or connection plar configuration statement) and the configuration (show run) from the CME and the CUE.
Lastly, take a look at the following notice:
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps5520/products_field_notice09186a008023cfe2.shtml
which might apply to your situation.

WRT160NL DLNA Media Server Unstable (Twonky Media)

I have an NTFS formatted USB disk drive (Western Digital My Passport Essential Black 320 GB WDBAAA3200ABK) attached to the WRT160NL wireless router (Firmware Version 1.0.02), and I have video, picture and music files on the USB disk drive in three folders: Videos, Music, Pictures. Auto-scan is disabled, I scan the media files manually by clicking on the 'Scan All' button.
PROBLEM 1
The worst problem is that the router is very sensitive to files that can't be recognized by the router as media files. For example if there are subtitle files (*.str) between the media files, then strange and nondeterministic things happen: some valid media files are skipped and not included in the media database; some files included but the file names are mixed. The most irritating in the bug is that there is no log file, where you could find the problem, and so you never know which file cause the problem, and you have to browse through all the files hunting for the cause.
PROBLEM 2
When the router is in the process of scanning the media files, then the internet (WAN) connection often can't be used, although the router can be accessed and the status says it is connected to the internet.

WRT610N maybe have the samme problem, Media Server USB HDD
Ex, if you edit a playlist *.M3U and do a manuell SCANNING it will recogized the different (because the date is diff ?) If you edit again and make a second scanning (samme date) the playlist dissapear and IS GONE until you reconnect the Hdd or renamme the playlist.
EX2 : A file named   13 - Ricky Martin - Livin La Vida.mp3 and you renamme it 12 - Ricky Martin - Livin La Vida.mp3 the file is gone from Media Server !
Normal use, you add a file , NO problem but it seams getting confused when you edit/renamme/move files.
I solve it like this EVERY TIME -
Disabled Media Server
Rename media folder
Enabled Media Server
Scan the renamed folder
It works   !
Using WRT610n Firmware Version: 1.00.03 B15
WD 1TB USB HDD with powersuply

Should I buy the WRT610? What say you Linksys???

I am in the market for a new wireless router and found majority of the reviews out on the web to point me in the direction of the new wrt610n. Here is the problem that I have seen so far. I come to the site here and all I see from WRT610N owners is how many issues they are having with this router. I also see a ZERO lack in response from Linksys in this matter which is very discerning.
Linksys are you there??? How about some info on whats going on with this latest product of yours? Has these issues been looked at or does everyone have to wait for the next release of the product... What does a guy have to do to get a decent wirless N router without heading over to apple (no offense meant to apple people).
So in short why Should I buy this product? Feature set looks great but is that all this router is all looks and nothing else? What say you?

This is a community forum. As far as I know, the only Linksys employee here is the forum moderator, and he rarely answers questions.
The forum is designed to help people solve their router issues. So naturally, the vast majority of the threads contain reports of various router problems. You should also consider that the most popular routers have the most postings, not because they are bad routers, but because many (often inexperienced) users are using those routers.
I would estimate that about 75% of the router problems are actually just "user error", that is, not understanding how to setup your router and network properly. This category also includes users who insist on trying to push the limits of the router, for example, trying to use a brand new (cutting edge) WRT610N with their Windows 98 computer, using a wireless b adapter with an 8 year old driver. (In theory, this should work, but in reality, there are often problems.) Another 15% stem from poor wireless connections caused by such things as overcrowding in the 2.4 GHz band, buildings that have "radio dense" walls (i.e. walls that have building materials that are hard to penetrate), and the fact that the wireless n standard is not yet finalized (this causes some incompatibilities). The last 10% of the threads might truely be problems that Linksys could potentially fix. Linksys generally gets blamed for far more than the problems they are actually causing.
The good news about Linksys is that they have this forum available (Not all router manufacturers run a forum), and it is widely used, so there is a lot of router info here. Also, to my eye, Linksys seems to have the best documentation of any brand of router. The other thing is that, especially with newer routers, Linksys does appear to be actively working to correct firmware flaws, as evidenced by their postings of updated firmware.
As to whether or not the WRT610N is best for you, that really depends on a lot of factors including (1) what other wireless equipment do you own (is it wireless n, g, or b ? ) , (2) how fast is your Internet connection? (3) how are you planning to use your wireless n? game play? large file transfer? ordinary web surfing? (4) do you have any special networking needs (VoIP, video cameras, web servers), or do you just need to surf the web? (5) Are you willing to buy additional equipment, such as wireless n adapters for your computers? (6) If you already own a router, what is the make and model?
Please describe you networking equipment, and the planned network workload, in detail.
Message Edited by toomanydonuts on 08-02-2008 08:20 AM

Problem with Peer...

Hello. O cant find smething helpfull in the internet. maybe here i can get help... if i rightclickon my friend (always relay tunnel) and then diagnose, this is incoming: Zusammenfassungsbericht (Summary report)
------------------------Testname (Test name): Peer Ergebnis (Result): [GELB (YELLOW)] -> Probleme gefunden
Details (Details):Tunnel: (Tunnel:) OK (OK)Lokale Ergebnisse:
Adapterkonfiguration: OK (OK)
Datenverkehrstest: OK (OK)
Peer-Ergebnisse: [184-878-678]
Adapterkonfiguration: OK (OK)
Datenverkehrstest: Eingehender Datenverkehr blockiert; Firewall-Einstellungen prüfen (Inbound traffic blocked, check firewall settings i deactivated the firewall but always the problem

Hi iDevilCore,
The test show the firewall problem at your peer's computer.
The firewall should be modified/disabled on the other machine.

Ad-hoc/peer-to-peer WIFI problems

There definitely seems to be a problem with WIFI on the iPhone 4.
At my work, I have been using a peer-to-peer/ad-hoc wireless connection setup on my laptop with internet connection sharing. I've been using this for over a year, first with my iPhone 2G and then my 3GS. Five of my colleagues have also been using the connection fine.
However, two of us have now upgraded to iPhone 4s and, although they work fine on our home WIFI networks, neither of them work on our work ad-hoc network. They connect to the network, but it takes ages before the WIFI symbol appears and, when it finally does, you cannot access the internet.
Also, if one of our iPhone 4s connects to the network, all other 3Gs and 3GSs can’t access the internet! It’s amazing to watch. Surf from web page to web page on a 3GS fine, connect an iPhone 4 and, bang, 3GS stops loading pages. Turn off WIFI on the iPhone 4 and 3GS starts loading pages again. Weird!
Before anyone asks, there are no ip address conflicts on the network and we have checked the settings on all of the phones numerous times; they’re fine.
We’ve also tried this on three different laptops although, I have to admit, they are all the same model; IBM ThinkPad Lenovo R400.
I’m suspecting it’s a frequency issue and I can probably resolve it by adjusting the WIFI card settings on the laptop, but so far I’ve had no joy.
Any ideas?

Tried many different combinations of the WIFI card settings on the ThinkPad, but no joy. It's as though the iPhone 4 is too noisy on the network and causes the other devices to fail to comunticate on the network.
When a 3GS is connected on its own (or with other 3GSs), I can ping it. But as soon as I connect an iPhone 4, I can no longer ping the 3GS. What is happening?
The actual card in the ThinkPad is an Intel WiFi Link 5100 AGN.

WRT610N v2 peer to peer problem

Similar Messages

Maybe you are looking for