WS-RM sequences not visible in SOAMANAGER Sequence monitoring

Hello
What i need to know is why I cant see any WS-RM sequences in SOAMANAGER>Sequence Monitoring. Please note:
- I can see the asynchronouse messages in the XML monitor (srt_tools >> Monitor for Processed XML , or SXMB_moni)
- I can see the sequences on the receiver side ( NW CE 7.3 SP2)
- I can see the messages if I put a payload trace on the users that triggers the call ( in srt_util)
- I have this problem only in the production system,. In dev, quality and sandbox I can see the sequences on both sender and reciever side.
- The systems are identical is terms of SP's.
Any Ideas?
Regards
A

Hi Adam,
I don't know of a report that may be removing them but some other suggestions:
- Check if you have the necessary authorizations for monitoring in production (e.g. authorization object S_BGRFC). Maybe do an authorization comparison check with what you have in Dev & Quality.
- I actually think that you may need to up the trace/log level in production to view these sequence messages. For better performance in Production, these levels are normally set to the lowest level (errors only), see URL below for guidance:
[http://help.sap.com/saphelp_nw70/helpdata/en/46/ee28b0837d3c1de10000000a155369/frameset.htm]
Do a comparison with Dev & QA for the log/trace settings there.
Regards, Trevor
Edited by: Trevor Naidoo on Jul 14, 2011 10:48 AM

Similar Messages

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

Changes to master nested sequence not updating in new sequence

Good morning - I have spent the past half hour or so searching the forum for this topic but have not found the answer. If the answer exists elsewhere, please point me in that direction; otherwise, here goes:
I created a nested sequence by simply dragging one sequence (A) from the browser into a new sequence (B) in the timeline. Later, I went back to Seq A and replaced all of the audio (which was in-camera audio) with clean audio from a Tascam field recorder. So far so good. However, Seq B still plays the original camera audio and is not reflecting any of the changes I made to Seq A.
I tried deleting audio render files, quitting and restarting FCP, etc., all to no avail. I have the latest versions of the OS and FCP. Any suggestions would be much appreciated.

As you've probably found there are several ways to create/edit nests into sequences. The manual points out an advantage of using nested sequences is you can make a change and that change will be reflected in all the subsequent nests. As you've also found out, this isn't exactly true.
The only way I've found to have communications carry forward to nests from the original sequence is if I edit the sequence into another sequence via the Canvas overlay/edit keyboard shortcuts from the Viewer. I've found dragging and dropping to do as you've found.

Payload not visible in the XI monitor

In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the Payload is not visible in the last two steps of the monitor. We can see the Payload until Technical Routing in the monitor. But Call Adapter and Response steps do not have payload.
(TCode: SXMB_MONI)
when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
XML Message:
Receiver Grouping
 - SOAP Header
 - SOAP Body
 - Payloads
Request Message Mapping
 - SOAP Header
 - SOAP Body
 - Payloads
Technical Routing
 - SOAP Header
 - SOAP Body
 - Payloads
Call Adapter
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Response
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Any suggestions would be highly appreciated!
Thanks in advance.
Faiq

Hi faiq
This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).
regards,
Peter

Variable is not visible at variable sequence in BEX

Hi Experts,
I have created the new query with selection variables in BEX (BI 7). Now I want to change the sequence of the variable selection. But there are no variables at variable sequence in query property. Please any suggestions.
Thanks In Advance
Ravi

Dear Ravi,
while defining a variable,,
u have an option like READY FOR INPUT.
u should tick that check box..
unless and until u check that box,,..that variable will not pop up or visible in the query designer..
Hope this helps u.
Best Regards,
VVenkat..

XI Adapter not visible in Comm Channel Monitoring ?

Hi friends ,
I am trying a proxy scenario in Discovery System V3 .But when we create XI receiver adapter we cannot see the status of that channel in communication channel monitoring .
What could be the reason ? Any input will be appreciated
Thanks.,
V.Rangarajan

Hi Vinod ,
We are using SP12 .
And also one more reason that u were unable to see XI adapter is that u might not have activated that adapter in your admin settings.
       I saw in JEE Admin . This Adapter is in Running mode . the parameters are
xiadapter.isconfig.username PIAFUSER
     1. May i change it to PISUPER and give password ?
     2. http://localhost:50080/sap/xi/engine?type=entry   as   xiadapter.isconfig.url
         but in CC monitoring , IE Components Test message tab i can see the url as   http://iwdfvm2160.wdf.sap.corp:51080/sap/xi/engine?type=entry
           will that port 50080 and 51080 will cause the problem ?
Thanks.,
V.Rangarajan

Loaded File not visible in XI Message Monitoring

Hi,
I have a configured a scenario where a flat file is integrated via XI File Sender Adapter. The file was loaded out of the file directory, but in XI Message Monitoring I can't see the message. In the Adapter Monitoring, the respective Communication Channel is green.
Any idea what this might be?
Thanks in advance.
Alex

Hi,
In general , we will follow the below steps
--First we we check for the file is picked or no, if not see the Sender side CC parameters like mode and path details
--If file was picked then we need to check whether we are using the File content conversion parameters or not if yes we need to check the FCC parameters ,
-- Goto RWB-Channelmonitoring by the following link
http://host:port/mdt/channelmonitorservlet
select the sender side CC name and check for errors
-- If no errors in above, goto SXMB_MONI for Integration Engine xml processing , check for successful or error occured black or red color
--if success in SXMB_MONI then we need to check in RWB as above channel monitor now select the receiver side CC
-- If no errors then check for output file is placed intarget or not
Regards
Chilla

SOAP messages not visible in RWB - Message Monitoring - Adapter Engine

Hi,
following scenario:
ERP is sending IDocs to PI.
Within PI an integration process sends the IDoc data through a SOAP (WS) receiver channel to a system far far away.
In RWB -> Communication Channel Monitoring I can see all delivered messages selecting my SOAP channel.
But:
I can´t see the SOAP messages in RWB -> Message Monitoring -> Messages of Adapter Engine.
In RWB -> Message Monitoring -> Messages of Integration Engine I only see SOAP messages with status "Error".
Successful column is empty.
Do I have to adjust some system / monitoring parameters also seeing SOAP messages in RWB->Message Monitoring?
Thanks in advance,
André

Hi Ravi,
thanks.
But there are thousands of successful messages delivered to the receiver.
These successful messages can only be seen in the Channel Monitoring.
I can´t find these successful messages in Message Monitoring.
Only some with status "Error" are displayed.
Strange...
Cheers,
André

Service definitions from BAPI not available in SOAMANAGER

Hi experts,
We have created some service definitions from a BAPI. Runtime configuration has been set up in transaction SOAMANAGER and everything is working fine in development environment. We've just transported our service definitions to quality environment but the services are not visible in SOAMANAGER.
Any idea about what can be the issue?
Many thanks for your time.
Regards.

Hi Jonathan,
Definitely it was a problem with the transport. I had to apply 1903490 note to solve the problem.
Many thanks for your input.
Have a nice day.
Regards

CC not visible in RWB-Communication channel monitoring

Hi All,
Communication channel created in the directory is not visible in
Communication channel monitoring of RWB. I refresh ABAP cache, SXI_CACHE,
CPA cache. Still its not visible. Deleted and created again. Still no use.
None of the communication channels newly created are visible in RWB. Could anyone suggest some ideas to resolve this issue.
Thanks
Ricky

Hi
Just to be sure a basic question to start with : You do activate your channels in the ID after creation ?
Dirk

Communication channel not present in Communication channel monitoring

Hi All,
We have the communication channel in Integration builder and it is active state. but we are not able to see it in C.C monitoring. and we are not sure whether the channels are started.
how can we check whether the channels are started?
and why the communication channel is not visible in C.C monitoring.
It works fine in DEV and QA. but we are facing this issue in PRD

Hi Ravi,
in the cache connectivity test, all the components are in GREEN color (Enterprise Service Repository, Integration directory, Integration server - ABAP, , mapping runtime on central adapter engine, adapter engine, mapping runtime) . Only central adapter engine is in yellow color and the message says:
Apr 19, 2010 6:16:28 AM - Cache notification from Integration Directory received successfully
Attempt to fetch cache data from Integration Directory not yet started or still in process.
Restarting the server also did not work.

Details button does not work in RWB Message Monitoring

Hi,
I am getting
'Runtime error - details is null or not an object'
client-side javascript error message, when I select a message and press the 'Details' button in the runtime workbench message monitoring. The message details do not show up. I am using XI 3.0 SP12.
Any idea how we can fix this javascript error?
Thanks in advance,
Suresh.

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

Sequences are not visible to user/schema

Hi
I have copied a schema(abcd1)(schema level refresh) from prod to dev(abcd2),i verified that all objects(tables,views,synonyms and sequences etc..) got created in the dev schema(abcd2) ,but now the client complains that the sequences are not visible to user/schema(abcd2) in dev,he says it was visible before and that they are visible to another schema(abcd3) in dev.... can anyone please advise? Thanks!

877410 wrote:
Elapsed: 00:00:00.09
SQL> SELECT * FROM all_tab_privs WHERE table_name = 'ABC_WXYZ_PW_SEQ';
no rows selectedThat means the sequence either doesn't exist, or the user that ran the query doesn't have access to the sequence. If you have an account with DBA access I'd try running the query against the DBA_TAB_PRIVS view.
You may also want to query the _SEQUENCES (ALL, USER, DBA) view to see if the sequence exists.

Using "Single Pass" entry point with sequences not named "MainSequence"

Hi,
The object model of TestStand provides clustering of multiple sequences in one sequence file. The editor itself allways knows which sequence the user has actually selected (enrty Run ... in Menu Execute is allways fullfilled with the correct sequence name).
Why isn't there any support of using the entry points of the model with this selected sequence, these sequences use the default "MainSequence" if they are called by the corresponding menu entry of the Execute Menu.
I am looking for any solution to use the entry points (by menu calls) with sequences not named MainSequence as well.
Any ideas?
Regards,
Sunny

Sunny -
In the process model entry point "Single Pass", if you look at the sequence context during an execution, you will notice that the sequence that was visible or "selected" at the time of the execution is started is specified under "RunState.InitialSelection.SelectedSequences[0]". You could alter the MainSequence call step in the process model to call that sequence instead. Keep in mind that you will have to decide how to handle the case when no sequence is selected, do you call MainSequence or do nothing?
Scott Richardson (NI)
Scott Richardson
National Instruments

Video effects not working on nested sequences in Premiere Pro CS5

Hi -
I am having some trouble with Premiere ProCS5. I have a project with a few clips which I put together in one sequence. I put this sequence into another sequence. There I will add one or two tracks of additional images and apply color correction.
The problem is: None of the video effects I drag onto the sequence (which now is a nested sequence) have any effect. Whatever I change in the effect controls will not sho up in the monitor. Audio effects do work, though. Furthermore, none of the tracks above the nested clip are displayed. To clarify: The nested track is on V1, another clip is on V2 and an image is on V3. Only V1 gets displayed.
I know this is supposed to work and it actually does in another project created in the same version on the same machine with the same kind of material. But no matter how often I create a new project, applying video effects to a nested sequence just does not work.
Even more strange is the fact that my applied effects DO show up in the "Export Settings" window. They DON'T, however, in the final rendered file. I would suggest this is a bug.
What could be the reason for this behaviour?

It can help if you Toggle Track Output to ON. The visibility icon on the left side on each track.

WS-RM sequences not visible in SOAMANAGER Sequence monitoring

Similar Messages

Maybe you are looking for