WSDL generation wizard does nothing...

I am attempting to use the beta 3 software to connect to
Exchange 2007. Unfortunately, I dont see a dialog on the WSDL
wizard to enter uid & password. I presume I can simply put
"https://" in the uri field (Exchange requires
https) but Exchange also requires user authentication for any file
it serves - this includes the crossdomain.xml and the services.wsdl
(and the xsd, etc.) How can I handle the authentication piece in
the Flex WSDL wizard?
Regards,
Chris

Hi Chris,
In the second step of the Import Web Service (WSDL) wizard,
simply enter the URI to the wsdl file. When you hit Next, it will
automatically detect if authentication is needed. If that’s
the case, a dialog will pop-up asking for the authentication info
so to be able to proceed with the introspection and move on to the
third wizard step. Please let me know if this works for you.
Thank you,
Lacra

Similar Messages

My Ipod 4th generation is unresponsive to my touch, and will not allow lockscreen access, and also is stuck on the "Not enough Storage" button. When I try to get rid of it, it does nothing.

My Ipod 4th generation is almost unresponsive to my touch, and will not allow lockscreen access, and also is stuck on the "Not enough Storage" button. When I try to get rid of it, it does nothing. My ipod's power button, volume buttons, and home screen button all work, and I can still use my start/stop headphones to listen to music.How do I fix this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

OEM - Refresh Template script generation wizard don't work

(Oracle 9.2.0.8, single-master-many-mviews)
Hi,
I have never trusted in OEM but this time I hoped it will help me. Alas!
I created the deployment template using an OEM wizard. Now I need to generate the template script. The template script generation wizard supposed to do this but when I reach "Step 4 of 5 - Set refresh schedule" I set the interval and then... pressing "Next" button just does nothing. I can't pass to Step 5 despite all the information has been provided correctly. Anyone has any ideas about this or should I do it manually as usual and forget about OEM?
Oleh

Welcome to our community, Linda
In RoboHelp, if you open the Glossary pod (View > Pods > Glossary > Select Glossary) do you see terms and definitions listed there?
If not, that would explain it as the Glossary has no entries.
Assuming it does have entries, you may simply need to enable the tab by clicking View > Pods > Project Set-up. Expanding the Windows section in the pod and double-clicking your CHM window.
A CHM window looks like this:
If you don't see a CHM window, you will need to create one. If you do see a CHM window, double-click it. Then ensure the Glossary is enabled.
Keep us posted! Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Clicking on M/S' RUN and/or SAVE does nothing - just sits there

Have had this problem for a few days. In trying to open again, it always tells me Firefox is still running and to close it first. There is no Firefox running! Have uninstalled FF and in trying to install a new one, I get as far as the Run/Save; clicking on either one does nothing, it just sits there. Thanks for your help. PS - I've been using FF for ages - first time I've had this problem. PPS = tried to cut/paste browser url but went to open a file.

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
#After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
WARNING: Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be easily recovered unless they have been backed up to an external device! See [[Back up and restore information in Firefox profiles]]. 
Please report back to say if this helped you!
Thank you.

"Roll over to try, click to apply" does nothing

I just did the latest Firefox update - no problems - but once again, after the last 2 or 3 or more updates, the "Roll over to try, click to apply" option to try out the new 'personas" does nothing. I remember when they first came out and I could roll over them and see all the cool personas. I never actually chose to apply one but now, as I said, when I rollover, nothing happens. I'd like to still see what they do. If so, maybe I'll eventually actually apply one. Any idea why it doesn't work?

'''''"the "Roll over to try, click to apply" option to try out the new 'personas" does nothing"''''' 
See cor-el's suggestiong here: https://support.mozilla.com/en-US/questions/717673?s=Roll+over+to+try&as=s
'''davidio'''
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
*Adobe Shockwave for Director Netscape plug-in, version 11.0
*Adobe PDF Plug-In For Firefox and Netscape "9.3.3"
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
#**On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
#**If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link and more information''': https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
#*After the installation, start Firefox and check your version again.
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Et_FORM_DATA_ADD event with Document Generation Wizard

In B1 2007 UI API, the et_FORM_DATA_ADD event doesn't get triggered with Document Generation Wizard. So, if the user using Document Generation Wizard to generate A/R invoice, how does my program get notified. If they use the A/R invoice form, we will get et_FORM_DATA_ADD event.
Thanks,
David

Hi,
You can use the SBO_SP_PostTransactionNotice stored procedure in order to call your code and do the required actions.
You can find more information on how to do it at the document https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e991e2b9-0901-0010-0395-ef5268b00aaf and also you can have a look to the DIEventService tool that can help you coding it at https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/53cefa6a-0a01-0010-cd8e-e7c189cb6519.
Hope it helps
Trinidad.

SAP xMII Content Generation Wizard login problem

Hi,
I installed content generation wizard.
after starting it ask login information.I used login information below:
Web Server: ServerName
username : administrator
password:xxxxxxxxxx
it does not accept and gives message below.
Error in credentials-Login unsuccessful.
Administrator password is correct.I tested it logins MII easyly.
How can i solve this problem?
Thanks.

Web Server : Host:Port
For Example: miisrv:50000

The Setup Wizard does not locate my G-Range Expander. PLEASE HELP!!!!

I have encountered a problem. Can anyone help?
Today I purchased the Linksys Range Expander to boost my wireless internet signal (I currently am a verizon fios internet user). I used the CD that came in the package and plugged the expander into an outlet. First, the CD Setup Wizard prompts me to choose the internet signal to be expanded. I find my signal on the list, click it, and wait for the Wizard to "locate the G-Range Expander". After a few seconds, a box comes up on the screen reading "Wireless G-Range Expander not found. Make sure the expander is plugged in". I have reset the range expander and plugged it back in multiple times; however, nothing seems to help the wizard locate the expander (even though I am sitting very close to it). When I click on "find available internet signals" on my laptop, the linksys signal appears, even though the wizard does not find it but it is not usable.
Please help the wizard locate my expander. Thanks so much!!

If you are trying to configure your WRE using the setup disk, you can exit from the setup and configure all the settings on your Router Manually...Follow the steps bellow.
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Expander, wait for 30 seconds and re-connect the power cable...
1. Connect your Expander to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'-
Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0...Click on OK button to Save and Click on "Close" on main Properties window...
2. Now open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.240. Leave the Username blank & in Password use admin in lower case...It should open your
Expander set-up...
3. Once you get to the set-up page you can follow this link to change the Expander Settings...
NOTE : The link also explains to check the Wireless Settings on your Router...
4. While changing the Expander settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP/WPA Key) are identical on both the devices(Router and Expander)...Also make sure to change the Expander's default IP to match your network and Gateway Address should be your Router's address...ex. Expander's IP Address : 192.168.1.240(assuming your router's default IP Address is 192.168.1.1), Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1...
5. After configuring the Expander you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically...Disconnect the Expander from the computer and power cycle both the devices(Expander and Router)...Your Expander should be configured...
In case if you don't get the Expander set-up just leave it connected to your computer and reset it for 30 seconds and follow Step 2, Step 3, Step 4 & Step 5...
Hope this helps.

The bottom half of my screen is white. Disabling Add-ons does nothing.

disabling add-ons does nothing to help as another question's answers suggested. i would say i am savvy .. but this has me at a loss. (Not my computer so history of this device is questionable)
Additional System Details
* Windows Vista
* Firefox 3.6.10
Installed Plug-ins
* np-mswmp
* The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
* NPRuntime Script Plug-in Library for Java(TM) Deploy
* Default Plug-in
* Provides additional functionality on Facebook. See our web site for details.
* Google Update
* BrowserPlus -- Improve your browser! -- http://browserplus.yahoo.com/
* Shockwave Flash 10.2 d161
* Adobe Shockwave for Director Netscape plug-in, version 11.5
* iTunes Detector Plug-in
* Yahoo Application State Plugin version 1.0.0.7
* 4.0.50826.0
* Bing Bar
* Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
* My Web Search Plugin Stub for 32-bit Windows
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
User Agent
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10 ( .NET CLR 3.5.30729; .NET4.0C) FBSMTWB

Tap Settings / Safari. Clear the History, Cookies, & Cache.
Restart your iPad.

Document Generation Wizard Creating Documents out of order

Experts,
I am experiencing a strange issue with the document generation wizard.
I will begin by stating that we are using 2007A SP00 PL47
This is our process.
An import document for sales orders is created and imported through the DTW
We then start the Doc Gen Wizard in order to create draft deliveries which are then picked up by a shipping solution.
We use the expanded criteria in order to select the appropriate documents.
The wizard is set to sory by Document number (this is imperitive as the shipping solution requires these to be in order to effectively process).
Up until a couple of days ago this process had worked flawlessly.
Sales orders are imported, and the corresponding documents are created in the order of the sort criteria.
Example:
SO#              |          Draft Delivery Internal #
1                -             1
2                -             2
3                -             3
4                -             4
etc.
Now this is happening:
SO#              |          Draft Delivery Internal #
1                -             3
2                -             2
3                -             4
4                -             1
etc.
There is no pattern to the sort.
I have tested this multiple times, and 90% of the time it is incorrect.
Additionally I have tested this with the same database in a separate test environment and it is correct 100% of the time.
I have made no configuration changes to the network, server, or the B1 Application prior to the change in process order.
Does anyone have any ideas, or have you sen anything like this before?
Kind regards,
Lucas

Document Generation wizard. The problem we have is that the warehouse will process a bunch of orders. Their "packing slips" print as the delivery note is generated and sent to SAPB1. Then they go to the document generation wizard to turn the DNs into Invoices and have the Invoices print out. Aside from the fact that it goes through all BPs, which takes time, anything that does print, prints in BP Name order, so they then have to match up the Invoice to the Packslip they just printed, two piles of papers in different order. While using the Document Print option can get around that, somewhat, it makes other processes difficult. The best solution would to be able to have the document generation wizard process DNs to Invoices, and print them, in an order other than the BP name

Select Principals from UME is doing nothing - Potential Owners BPM Task

Hello,
I don't know why when I try to search for a potential user for a task, the NWDS is doing nothing. It didn't show any user, it even try to search in my UME. I've seen the log viewer but there are no error messages. I've already checked that the SAP Server is well configured in the WSDL.
Why is happening this? How can I solve it?
I'm in NWDS CE 7.2 SP06
Thanks & Regards
SU

Hi.
Please check whether useradmin role(SAP_BPM_SuperAdmin) is assigned to you in the Server connected to NWDS.
If you already have the role assigned, check whether this [thread|Problem fetching users from UME in NWDS 7.3; helps you.
Regards,
Unni

Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black but my ipod synchronises to my iTunes library. Please help!

Does anybody know why my ipod touch 3rd generations screen does not work show anything? The screen is all black like it is switched off, but my ipod synchronises to my iTunes library. It is fully charged. Please Help!!!

Try here:
iPod touch: Hardware troubleshooting

I am trying to install a language disc. I clicked on the installer. It ran for a long time without installing. I click stop installing and it says it is stopping but is doing nothing. I am unable to eject the disc or stop anything.

I am trying to install a Portugese language disc. I clicked on the installer icon and it said it was installing, but it ran forever without doing anything. I clicked "stop installing" and it says "stopping", but it is doing nothing. I am unable to eject the disc or do anything because it says an operation is in progress.

Please provide some info on the disc, where it comes from, who made it, etc. Also tell us what version of OS X you are running.

I upgraded from 3.6.13 to Beta 4.0 and now Firefox will not open at all I tried to uninstall to start again but it will not uninstall either it does nothing.

I uninstalled Beta 4 and re-installed 3.6.13 now Firefox will not open at all I tried to uninstall to start again but it will not uninstall either it does nothing, I have been using Firefox for a long time but cannot resolve this problem can anyone help and give me a solution please. As I use Firefox as my web browser it is very frustrating.
The fact it will not uninstall appears to be something completely new as nobody I know who uses Firefox has ever encountered this in the past.

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
If necessary then also see:
* http://kb.mozillazine.org/Browser_will_not_start_up
* http://kb.mozillazine.org/Error_loading_websites

Report generation toolkit does not work

Hello,
The report generation toolkit does not work.
It seems to point to the 'Generate Report Data Members.ctl'.
I suppose it has something to do with the wrong set of active X-controls ?
I work with Win 2000 and Office XP
How can i solve this problem ?
Thanks in advance !
Regards
Christine

Hello Julien,
Sorry for the late answer
I become a broken arrow, when openening the example Sample Report (Excel).vi
Searching further for the cause of the error it brings me to the sub vi tables.
Print screens in attachment
Regards
Christine
Attachments:
error Ni Reports.doc ‏67 KB

WSDL generation wizard does nothing...

Similar Messages

Maybe you are looking for