Wwsec_person$ default group

I am creating new users using ldap via a form. The user gets set up fine and I can see the default group when I log into the administrator. However the wwsec_person$ table is not getting updated with the default group. Can someone please tell me why this would be?

Yannick -
Thank you for the reply. Do you know which table is used in OID? Basically why I need to do this is we hire many new employees every week and create accounts in AD. We sync AD -> OID but the people who create the new users never inform me that they have been created so they never get a default group assigned. This causes them to go to the 'Portal Builder' page when they login to the portal.
To fix this issue Im writing a powershell script to automatically update the default group of all employees that do not have a default group assigned. Do you know if a better method I can accomplish this for bulk OID records automatically? I'm very much open new/better ideas this was the best method I could think of currently.
Thanks again.

Similar Messages

Where is the default group information stored for a portal user?

Hello -
There is a field in the WWSEC_PERSON$ table called DEFAULT_GROUP, and it is populated with an ID from the WWSEC_GROUP$ table but it seems like there is more to the overall picture here.
If I try to manually update a users group via SQL,
UPDATE WWSEC_PERSON$ SET DEFAULT_GROUP = 318 WHERE USER_NAME = 'XXXXXXX'
Then check the portal profile for the user 'XXXXXXX' I do not see their 'Default Group' as being updated. (However the default group is in effect because these users are sent to the correct group when they log in.
What do I need to modify for the group name to show up for the user on their profile page?

Yannick -
Thank you for the reply. Do you know which table is used in OID? Basically why I need to do this is we hire many new employees every week and create accounts in AD. We sync AD -> OID but the people who create the new users never inform me that they have been created so they never get a default group assigned. This causes them to go to the 'Portal Builder' page when they login to the portal.
To fix this issue Im writing a powershell script to automatically update the default group of all employees that do not have a default group assigned. Do you know if a better method I can accomplish this for bulk OID records automatically? I'm very much open new/better ideas this was the best method I could think of currently.
Thanks again.

How to set default group in EXS24 patch?

Hi,
This question is about the EXS24 sampler in MainStage 3. I'm in no way an EXS24 expert, so I'm hoping this is an easy one - I can't find it in the manual anywhere though. I'm working with some EXS24 patches that have been supplied to me for a live project, reproducing the recorded version using those patches. They are set up with keyswitches to select sample groups to allow the use of different articulations. The question I have is how to set the default group - so that every time the patch loads (for example) it selects the legato articulation group, instead of defaulting to staccato as it does at present. I've thought about scripting MainStage to send the keyswitch on load of the patch but that seems like a lot of effort to fix something that surely must be an easy fix I'm missing. From what I can tell, the last group defined is the one that loads automatically - but I can't find any way of changing the order of the groups - I can sort the view, but that makes no difference to the behaviour.

Hello Gaurav,
If I understood correctly, Your requirement is to update People Group segments based on employee category.
Basically you need to update people group values based on employee category before insert into assignment table.
You can acheive this using Dynamic Trigger on Assignment Table.
you need to change the new.people_group_id along with other segment values in this trigger logic.
Following articles will help you steps on how to create dyanamic triggers.
http://oracle.anilpassi.com/dynamic-triggers-in-hrms-payroll-demo.html
http://apps2fusion.com/apps/oracle-hrms/oracle-hr/204-triggers-in-oracle-hrms-and-payroll
Regards,
Saurabh

How to set DEFAULT GROUP for a user when I create a user manually thru pl/s

Hi Gurus,
I am creating portal user accounts and groups thru pl/sql calls to
portal.wwsec_oid.create_user_entry
portal.wwsec_api.ADD_USER_TO_LIST
I didn't find any parameters to set the DEFAULT GROUP for the users. I want to set the default group for all my users. I don't want to do it thru portal. Cuz, We have around 1600 users. Please post a reply if you have some info about how I can set this thru code.
Thanks
Raj

You can achieve that using 'wwsec_api.set_defaultgroup'....

Default group(example P+L result) in Financial statement version

Hello everyone.
I have question.
I see in financial statement
version. transaction code OB58.
there are default group such as Asset,
P+L result
how can I configure these group ? what transaction code to
edit group and display ?
please advice.

Hi,
When you create the FSV in transaction code OB58, these nodes get automatically generated and you can not directly configure any items or any accounts against these groups. If you want to use thses groups, you need to first define your items and then reassign these automatically generated items against those configured items which you will create. You can define your item first by clicking on the "Create Item" option. When you create this option place your cursor on the FSV. After that you can reassign the automatically generated items, under your configured items. Next you can assign the GL accounts again those items. Please check the screen shots below where first I have created one item called BS. Then I have reassign the "Asset" which were automatically created under BS. Then I have assign GL account range against "Asset" by taking reference from OBD4.
The item BS is created by selecting the option "Create Items". After that selected the item "Assets" by clicking on the button . Then place the curson on BS and click on the button . The following screen will open.
Group Asset is assigned under BS. Then click on the BS and choose the option Assign Account to assign the GL range.
Finally the GLs are assigned.
Please let me know if you have any questions.
Regards,
Pintu

What are default group permissions supposed to look like?

I'm struggling with permissions under Leopard (I understand many others are as well). My quick and dirty question is: what are the default user & group ID numbers for a fresh leopard client install?
I've only done archive & installs lately so no longer have a test bed to compare from. Currently on one machine user id and group id (GID) are BOTH 501. I think Leopard has moved the default user IDs to 1000 (on up) and the default group ID to 20 (staff).
When moving files between machines at one installation the group is coming across as "Unknown" from a Leopard server. Trying to Get Info on these files and unlocking the padlock in Get Info window will crash the Finder!! So I guess i'd like to change the group IDs so they're consistent on all machines. Didn't have this problem with Tiger.
Thanks for any help!
-MD

OK, so followed the instructions in <http://docs.info.apple.com/article.html?artnum=307128> and things were fine until i updated to 10.5.2. Now if I choose Get Info on a file in any external drive there is no longer a padlock under Sharing & Permissions. It only says "You can read and write" and that's it. No list of owner (Me), groups, everyone. they're not even listed anymore and the padlock is GONE!
ls -l in Terminal gets me lists like
drwxr-xr-x 6 steve _steve 204 Dec 8 2004 Hüsker Dü
and ls -ln returns:
drwxr-xr-x 6 501 501 204 Dec 8 2004 Hüsker Dü
i don't think i like the 501 501 thing. i'd prefer 501 20 .
anything i should be aware of before changing the group across the board to 20? (i'd also like to change the user folder from 501 501 to 501 20). should i use the dscl command, i used to try to get out of this mess before, somehow?
Permissions under 10.5 has sadly become a real mess! reminds me of 10.0 days...

How to create default groups in Weblogic- Security Realms -- Groups

Hi Team,
Unfortunately I have deleted some default groups from Weblogic->Security Realms --> Groups. How to add the groups.
Regards,
Ravi.

Hi Ravi,
These are the defaults groups present inside Security Realms ,you can manually create them by
Going inside Security Realms-->Users and Groups-->Groups-->New
Administrators----Administrators can view and modify all resource attributes and start and stop servers-----------------------DefaultAuthenticator
Deployers---------Deployers can view all resource attributes and deploy applications.---------------------------------------------DefaultAuthenticator
Monitors-----------Monitors can view and modify all resource attributes and perform operations not restricted by roles.------DefaultAuthenticator
Operators---------Operators can view and modify all resource attributes and perform server lifecycle operations.-------------DefaultAuthenticator
Restart the Admin Server
Regards
FAbian

Set a default group and permissions on upload.

All I need is for any new files uploaded to the server's sharepoint be set to a certain default group with certain default permissions (admin, r/w). I can change files manually, but I don't want to have to be doing this every few hours.
I am familiar with the concept of permissions, but I have never been successful in finding anything that would set default permissions.

Ever used inherited permissions?
Files and folders can be made to inherit permissions from the folder you put them in...

Meeting Place 8.5 Active users being moved to default group

Customer has multiple groups set up in Meeting Place 8.5 server which is getting Users from a Call Manager (8.5).
Intermittantly different Users are moved from their correct group into default group. Random occurance.
Users have not changed anything in their profile. This has happened several times in the past. Customer has to manually go in and move the User back into the correct group. New install of MP 8.5. Ideas appreciated.
Thank you.

All - what have discoverd is Meeting Place node is going away. Meetings will be held in Webex moving forward and MP should be used as an on prem audio bridge only. Some new WebEx solutions are on the roadmap.

Default Group Policy - Custom policies don't apply?

We have some computers in TEST OU with password lockout after 4 attempts but it doesn't work. If we disable the Default Group policy in the domain controller then it works.
With the Default Group Policy enable, we run RSOP.exe and it does show the correct policies was applied but why it still doesn't lock the user accounts after 4 attempts? There is no password lockout policy in the Default Group Policy.
Thank you!

> Local Group Policy
This is present because someone opened gpedit.msc on the computer and
configured something in there.
> Not sure why, local policy applied to Windows 7 computer. But for both
> computers, the lockout policy is still not working.
Because Account policies for domain users can only be changed at the
Domain level, not at OU level. Account policies at OU level are only
applied to LOCAL accounts, not to domain accounts.
If you're running 2008 DFL, you can use FGPP and PSO.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Assigning privileges to default groups

When I'm creating a user (using Workgroup Manager) and am assigning privileges to administer groups, the default group "windows computers" doesn't show up. Actually, only the groups I've created in Workgroup Manager show up. I'd like to assign administrator privileges to these computers to some of my user accounts on the network, but not necesarilly make the user a Domain Administrator.
Does anyone know a way to do this?
Xserve G5 Mac OS X (10.3.9) ldap master no AD, windows servers

Hi,
SAP uses the wage type group concept to group wage types that have similar characteristics with regard to payroll. You must assign all wage types to a wage type group. This is also true for user-defined wage types.
You have to assign wage types to wage type groups so that you can work with the Implementation Guide (IMG). In the Implementation Guide, you only perform wage type maintenance for the wage types required in that particular section of the IMG. You select these wage types according to Wage type group. This means that you can only use the IMG to maintain wage types that have been assigned to a wage type group. In other words, if the wage types have not been assigned to a wage type group, they do not appear in the wage type maintenance in the IMG.
Warm Rgds,
Arun.M

"Assign Collection Groups to Segment" - Disable Default Group Option.

Hi,
I am using the SAP FSCM Collections Management module. I have a requirement in the following:
"Assign Collection Groups to Segment"
I don't want to have a Default Group in a particular segment. The Default Group is a standard SAP feature.
I would like to disable it, does anyone have any experience with the Field Status Groups in Collection Management, or is there any way this can be disabled.
Do let me know at the earliest.
Thanks & Regards,
Bhairav Naik.

Hi Bhairav,
In our situation, we were unable to systematically determine which group/processor should be assigned for new customers. So, I created a group called "New" and made that the default. The A/R Manager is notified when a new customer is created. It is her responsibility to update the collections profile on the business partner.
Regards,
Beth

SharePoint 2013 Default Groups removal

Hi Everyone
I would like to know if any harm in breaking inheritance and removing SharePoint 2013 default groups.
Groups like
1) Approvers
2) Designers
3) Translation Managers
4) Restricted Readers
Any help will be greatly appreciated.
Regards
Prashanth
SharePoint Administrator

Hi Prashanth,
If the default groups have been deleted, then the groups cannot be recovered unless you restore the site from a backup.
The default groups have specific permission levels, so if you do not need that specific permision, then you can delete them.
More references:
http://office.microsoft.com/en-001/sharepoint-server-help/understanding-sharepoint-groups-HA102772363.aspx
http://office.microsoft.com/en-001/sharepoint-server-help/understanding-permission-levels-HA102772313.aspx?CTT=5&origin=HA102772363
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Setting the default group

Hello
maybe somebody can help , I have several groups loaded in the data portal, with different names from differents measurements, but all of them have the same channels, i mean the measurements were taken in different moments and under different circunstances but all of them measure the same properties, and I have to count the change in some channels in particular , in a loop over all the groups , I always get the result for the first group , i have used something like this:
for i=1 to groupcount
Call GroupDefaultSet(i)
msgbox(chnlength("Time")) 'time is the name of one channel in more than one group
next
and instead of getting , for example the length of all channels "time " i get the length of the channel "time" from the first gruop
Thanks for your help

Hi arkangel,
The GroupDefaultSet() command changes the default group, but that only affects ADDITIONS to the Data Portal after that point, such as new FormulaCalculation channels, excerpted section channels from VIEW, new ANALYSIS channels from an FFT calculation, etc.
If you want to reference channels of the same name from multiple groups, and you have DIAdem 9.x, you can use the [GroupName]/[ChannelName] adressing scheme to query off the "Time" channel from multiple groups. If you have DIAdem 9.1, then you can also use the [GroupIndex]/[ChannelName], [GroupName]/[ChannelIndex], or {GroupIndex]/[ChannelIndex] adressing options. For example:
For i = 1 TO GroupCount
ChNum = CNo("[" & i & "]/Time")
IF ChNum > 0 THEN Msg = Msg & "Group " & i & " --> " & ChnLength(ChNum) & vbCRLF
NEXT
MsgBox Msg
For DIAdem 8.x you will need to use the CNo() function's optional second parameter (ChannelNoStart) in order to ensure that you start at the next channel AFTER the one you just found. Channel numbers was all there was in DIAdem 8.x.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

New AP not showing in default group

I got a new 1042 AP and connected it to the network. I have a 2504 contrller with 6 AP's already on it. I thought I could just plu in the new AP and it would show up in the AP group. Instead it shows up as a rouge AP. How do i get the new AP to show up in the default group?
TIA,
Eric

Running Normal Memtest...
Passed.
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x84000800, 0x40000000
RQDC, RFDC : 0x80000036, 0x00000208
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
PCIEx: initialization done
flashfs[0]: 146 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32385024
flashfs[0]: Bytes used: 5680128
flashfs[0]: Bytes available: 26704896
flashfs[0]: flashfs fsck took 25 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 44:03:a7:e8:71:f0
Ethernet speed is 100 Mb - FULL duplex
Loading "flash:/c1140-k9w7-mx.124-25d.JA1/c1140-k9w7-mx.124-
25d.JA1"...#######################################################################################################
File "flash:/c1140-k9w7-mx.124-25d.JA1/c1140-k9w7-mx.124-25d.JA1" uncompressed and installed, entry point: 0x4000
executing...
enet halted
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1040 Software (C1140-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 11-Aug-11 02:58 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
FLASH CHIP: Numonyx P3
Radio0 present 8363 8000 90020000 0 90030000 B
Radio1 present 8363 8000 98020000 0 98030000 0
Ethernet speed is 100 Mb - FULL duplex
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-AP1042N-A-K9     (PowerPC405ex) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FTX1710K00G
PowerPC405ex CPU at 333Mhz, revision number 0x147E
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 44:03:A7:E8:71:F0
Part Number                          : 73-14034-06
PCA Assembly Number                  : 800-34273-07
PCA Revision Number                  : A0
PCB Serial Number                    : FOC170226AM
Top Assembly Part Number             : 800-34285-05
Top Assembly Serial Number           : FTX1710K00G
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1042N-A-K9
Press RETURN to get started!
*Mar 1 00:00:1
               *Mar 1 00:00:15.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:23.219: AUTOINSTALL: GigabitEthernet0 is assigned 10.13.2.146
*Jan 13 00:54:01.001: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 13 00:54:01.001: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 13 00:54:02.000: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 13 00:54:02.000: %LINEPROTINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Jan 13 00:54:15.656: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.13.2.146, mask 255.255.0.0, hostname ap
*Jan 13 00:55:03.506: %CDP_PD-4-POWER_OK: Full power - NON_CISCO-NO_CDP_RECEIVED inline power source

Wwsec_person$ default group

Similar Messages

Maybe you are looking for