X-FI Titanium, NOISE with 2.17.0007 Drivers (XP SP3)

4X-FI Titanium, NOISE with 2.7.0007 Drivers (XP SP3)? When I select Microphone or Microphone FP playback or recording it generate a noise in the Front Speakers (L/R/C channels in config 5.)
I suppose that the new option "effects microphone" has introduced the problem, but it is disabled!
The noise stops only selecting the line-in option in the playback control panel.
What can do?
Driver Tested:
XFTI_PCDRV_LB_2_7_0007.exe?
OS:
Windows XP SP3
Hardware:
CPU Intel E8600, CHIPSET Intel P45 , X-Fi Titanium Pro
Message Edited by sfoneloki on 08-05-2009 0:57 AMMessage Edited by sfoneloki on 08-05-2009 0:59 [email protected]

I have the same problem with the new drivers. Whenever I change modes, I get a quiet hissing noise until I mute the microphone/line-in inputs. This happens even with no mic plugged in, and the hissing occurs whether the input is muted or not - merely changing it, one way or another, will fix it. The problem was definitely not present in previous [email protected]

Similar Messages

IMac g5 fan noise with update to 10.4.11

Has anyone else experienced this?
I have never had any problems with fan noise with my iMac, though I know it's a problem, till the recent update to 10.4.11. After restarting, it sounded like an airplane. Never heard that before. I shut it down and restarted, and it doesn't sound like a plane anymore, but the fan is noticeably noisier than ever before, a constant whine/hum.
Besides the energy saver fix and resetting the SMU and canned gas in the vents, any other suggestions? This is annoying, it's been running pretty perfect for three years till this. Thanks.

The questions are certainly not dumb - almost anywhere is cheaper than Apple for RAM, I recommend [macsales.com] and [smalldog.com] or [newegg.com]. I don't think that going back to 10.4.10 will help, you should really vacuum the vents to get dust out, and make sure that there's nothing hogging your CPU and making the fans noisy, look at Applications>Utilities>Activity Monitor to see if anything is using an unusual amount of memory or CPU.
If you do want to install Leopard, I would suggest making a full backup of your system,I use SuperDuper! to clone my system to a firewire external drive. You should certainly upgrade your RAM if you install Leo, but I don't think your machine will be any quieter with a new OS.
You need to remember that your machine is several years old, and that things get creaky with age (I certainly have). Since you have the iSight, it's not a simple matter to open it and clean the fans off. If you are really disturbed by the noise, you can take it in to an Apple service place and have them clean and oil the fans, which should help enormously.
Sorry I couldn't offer more help, but fans will, and do, get noisy.

How to minimize noise with 1127/1331 setup?

Hello,
I've correctly configured my 1127 multiplexer switch with the 1331 terminal block. I've attached BNC to 2-wire adapters through which I'm routing precisely controlled DC levels. My problem is that I'm getting emf noise with the signal and suspect that it's being coupled through the two-wire pairs at the 1331 terminal block.
Is there a terminal block that I may attach to the front of the 1127 that has coaxial (BNC or SMA) adapters so that I may minimize this source of noise? I note that the BNC2095 product is not explicitly compatable with my SCXI 1127.
Thanks if anyone knows anything or has successfully dealt with this issue.
-Michael

Hi mkelley,
I've looked into this issue, and have some questions for you. What is the form factor that you need for this switch? Does the switch need to be SCXI, or do you have an available PXI slot for the switch? Are you using Switch Executive to make these routes?
It doesn't look like there is a BNC option for the 1127, however there may be other options for this cable type. The SCXI-1193 will give BNC connectivity for the matrix, using a MCX to BNC cable to connect the signal. I am confirming that this would be the correct option for you, as the SCXI-1193 matrix configuration will be a sparse matrix. I will follow up with you when I have more information.
Best regards,
Jordan D
Applications Engineering
National Instruments

Question;Will Toast Titanium work with new'SnowLeopard?

So I do have Toast 7.....will it work? do I need some kind of 'upgrade on my Toast Titanium for it to work with Snow L??? thx in advance! Larry

I've burned a couple of CDs with Toast Titanium 8 with success since installing SL. Haven't tried DVDs yet. However, I had no luck with Tivo Transfer portion of Toast 8. Sounds like that is what other users are experiencing as well. I might have to bite the bullet and upgrade to Version 10.

Background noise with i pod dock connection

Just wondering if anyone has had problems with a background noise with the bottom dock connection even when i'm not having it playing any music. and it doesn't matter if its in my truck or at my house ever dock connector piece of equipment has had this problem. i have no problem with background noise if i use my headphone jack. just wondering if this is something that can be fixed. and if it is hardware or software issues right now it seems more like a hardware issue.
thanks

Hi mate
What notebook do you have?
Music maker premium 17 is not known to me and I cannot say anything about this application but you should check if this issue can be related to notebook or to this special software. Maybe you should test it with other software.
Furthermore I would recommend checking the sound settings.
My notebook support Realtek sound driver in control panel -> Realtek HD audio manager you can change many settings check this if this is available.

Histogram of Gaussian White Noise with NI5112

I am digitizing some random gaussian white noise with a NI-PXI 5112. The problem is that even with very high number of samples (1 Mega sample) the distribution presents a lot of periodic pikes when making a voltage histogram (either with built in function or by postprocessing data with Mathematica).
I am using two synchronized digitizers and they both have the same behaviour (pikes symmetric around 0 and with periodicity), but give different response from one another.
I already tried to filter the data, change the vertical range of both aquisition and generation devices, but the pikes always appear at the same relative values, and with the same relative number of counts.
How can I overcome this problem ?

Could you post a screenshot of your histogram? How many bins do you have in your histogram?
Remember that the 5112 is an 8-bit boards so you only have (in the order of) 256 possible values so unless you 'hit' the exact values your bins will have un-equal weights. This could result in the periodic behavior you are observing.

Horrible noise with error 5100, MX700

After error 5100, I have tried resetting the printer, cleaning the tape, clearing any jams. No luck. Assoon as I turn on the unit, I get a horrible gear stripping noise with the error message; ink cartridges do not appear when I open the top. They are hiding over on the left.

Hello MWMarchitect.
Please try the following to see if we can resolve your issue:
1. Turn the printer off.
2. Unplug the power from the printer for at least 5-10 minutes.
3. While unplugged, remove any paper from the unit.
4. Double check for any obstructions found in the unit or paper paths.
5. If no obstructions are found, plug the power back in and turn the unit on.
If the error persist, please contact our support group using the "Contact Us" link below for additional assistance with this error.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Digital noise with digi 02

Can't understand why I'm getting this digital clipping noise with my digi 02. I'm running a macbook with all the latest logic express and digi updates. Could I be missing a firmware or an update?

B, is the right one. I think it's something with
protools core audio. The next thing I might try is
installing protools 7.3. Thanks
Hi Phil,
Due to not knowing your exact setup, like what version of Digi Core Audio, proTools, Logic, etc... I will hesitate to say exactly what is wrong.
You stated that clipping type "B" is what you are getting:
B. Is the clipping happening at the same spots along the playback of the
song?
If this IS the case, and you can hear the clipping at the SAME spot in the song, then your problems might be related to the Buffer setting, or maybe the version of the Digi Core Audio Manager and driver software.
What version of Digi Core Audio are you running? There have been several bugs with it for the last year, but all have been addressed in the latest version. I'm on version 7.3.1cs1 on my Intel MacBook Pro, and do not get any kind of clipping or distortion. Once PT and Logic are set up properly, it runs like a dream, so don't despair. I've been on my current setup for three years. The only time I got issues was when updating the OSX, and after updating Digi software, no more issues. so now, I ma usually one or two OSX versions behind, to be safe.
Cheers, and let me know more details on your set-up, so we can pinpoint the issue, and solve it.

IPhone 4S problem: Speaker only makes 'electronic noise' with incoming calls.. Has anyone else experienced this problem ?

iPhone 4S problem: Speaker only makes 'electronic noise' with incoming calls.. Has anyone else experienced this problem ?

I've not experienced this. But I do appreciate your asking.
Did you want help with your technical issue? If so, why don't you ask. Also state what troubleshooting steps you've taken.

Sever issue with Xorg and Nvidia Drivers

I run a 2.6.20 kernel with Xorg and Nvidia drivers all from arch rep on a Asus NV6200. Everything works fine, except one thing. When I exit X, the monitor shuts down imediatly. It wont start up at all, not even by manual startup. I cant understand what happens. The configuration is correct, is done with the correct settings for my video-card and monitor taken directly from the documentation. I cant use my X server at all since several days ... I checked the logs and there are no EE's. Anyway ... here is the log. Help anyone can help, I cant use X at all.
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux solarflare 2.6.20-ARCH #1 SMP PREEMPT Fri Mar 16 20:22:11 CET 2007 i686
Build Date: 27 February 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 21 03:26:45 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "AOC 7F+"
(**) | |-->Device "NVIDIA 6200"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(**) FontPath set to:
/usr/share/fonts/misc
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c34a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1106,3099 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1317,0985 card 1113,1216 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1019,0996 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1019,0996 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1019,0996 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1019,0996 rev 50 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0221 card 1043,820c rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xeaffffff (0x3000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xe8000000/24, 0xd0000000/28, 0xe9000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9755
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9755
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) NVIDIA dlloader X Driver 1.0-9755 Mon Feb 26 23:23:13 PST 2007
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.03.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): AOC Spectrum7F (CRT-0)
(--) NVIDIA(0): AOC Spectrum7F (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] 0 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[8] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[10] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[19] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[20] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[23] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.

No ... the problem is in the kernel that comes precompiled.
I did this test.
The first time I installed the kernel I unloaded nvidiafb since I dont like it.
When I install nvidiafb back something strange happends. Nvidia module fails to load.
The modprobe sais it cannot find the device nvidia.ko ... but it is there!
So my best guess is, there is something with the kernel. Any ideas?
Problem resolved, installed older driver
Last edited by Nefer-Ra (2007-03-22 02:59:25)

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

BootCamp Update 3.2. .exe file, Windows 7 uninstallable with cordless mouse until drivers in. What next then?

Trying to get windows 7 to run under iMac. I am learning to fly and the best flight simulator (I'm told) is still FSX which does not run on the iMac which I made my main computer infrastructure last year. And besides it's got the best screen in the house. Before buying both a virgin copy of Windows 7 (expensive) and of FSX (ditto) I checked the forums and there are definitely people saying it works.
My iMac has a cordless mouse and a cordless keyboard. I have read that the latest software which makes these work is in BootCamp3.2.
I quote from the apple pdf on installing windows:
Step 1 : Check for updates. In Mac OS X go to http://www.apple.com/support/bootcamp and check whether you need to update your software before you can install windows.
Yes I do. Can't call that URL very helpful on file selection, but OK, I worked it out. (Though could someone tell me if ALL intervening updates need to be applied. I had no way of telling where the full set of updates was, so I had to assume installing the latest would work.)
OK - so I need to install BootCamp_3.2_64-bit.exe
But having downloaded it, if I run it it opens in a text editor. Why is that? Explanation will help. But why is there nothing at Apple on this? It's apple software.
Searching I found people sounding equally confused, and someone says you'll need to burn it to a disc. That took a fair while too - but I did it. I found the help on burning very poor. It's hard to find how to put a file on a disk. The defaults are all for music and films. (Tip - use Finder, not other options, when you put a blank disk in)
So I now have the bootcamp upgrade file on a DVD. I learn (slowly) that because it is a .exe it must be run from Windows. But I have not got windows, that is what I am trying to load. And when I load the Windows Disc I can't get very far, because it can't cope with a cordless mouse, until the drivers are upgraded.
I am now worried that things will get worse, because the rest of the forums say you can't make Boot Camp Assistant work when there's already a partition made. And, there is. I made one before being trapped by a driverless cordless mouse.
I have an iMac 2.93 Ghz Intel Core i7. 8Gb 1333 MHz DDR3. ATI Radeon HD 5750. A cordless mouse and keyboard. I Bought Windows 7 Home edition 64 bit.
I'm a bit disillusioned. I bought this hyper computer to run some number crunching simulations via an Oracle database. The setting up was 10 - 20 times more difficult than setting up Oracle on my Dell laptop. The simulations ran half as fast as on the laptop and appeared to be frying the iMac's own hard drive. So I stopped. I flirted with Times Ten - but it was unsuited to my codebase (not Apple's fault) and then gave up. So this lovely computer is now used by my daughter to watch movies.
This is the second attempt at doing something moderately serious, and both have been very disappointing. If you think it's worth saving someone who is about to give up on Apple completely and leave this powerhouse to an idle life of Facebook, then your assistance will be sincerely appreciated. It's been 6 hours, a very irritating six hours, so far.

You really really do need to read the Windows 7 FAQ the Boot Camp 3.0 Installation and Setup guide for 10.6 and the Boot Camp 3.0 MacOS 10.6 FAQ a couple of times to really get to know the whole picture.
"Boot Camp" is just a basic set of WINDOWS drivers to run Apple hardware. You install Window first, via BCAssistant to start it, then after it finish's the install and restarts into Windows then you insert the "whatever you made disk" with the Boot Camp drivers on it, it should then give you an installer window, just like on the Mac side, if you want to "Run" it or "Open as a file". (Run it)
The Apple Software Updater updates ALL the Apple files including BootCamp Assistant on the Mac, it updates the Boot Camp Assistant to look for the latest drivers to use when it gives you the option to download the files onto whatever you want to use to download onto.
BTAssistant to partition the drive, then it will boot off the Windows installer, there is no more Mac control, it's ALL Windows now, have Windows format it the way you want, then it will finish by restarting into Windows, then you install the drivers while booted in Windows.
You need a wired mouse AND keyboard just like the instructions said. If you have the earlier Magic Mouse then they suggest you plug it into the keyboard instead of the computer.
If you partitioned like the instructions said, via Boot Camp Assistant, you can install Windows anytime you want, it won't forget it's there. YOU just have to remember where it is.
If you do have problems with the partition then at the bottom of the instructions it tells you how to restore the partition back to normal then you can start over.

Problems in transforming XML to HTML using HP-UX with Netscape Enterprise Server 4.0 sp3

Hi,
Has anyone ever had any problem using XML in NES 4.0 sp3?
I'm using the libraries com.sun.xml.parser, com.sun.xml.tree, javax.xml.transform.
The html is being created but is not being returned.
(it is not showed in browser)
This same xml application works well in Solaris with Iplanet Web Server 4.1, but it is not working in HP-UX with Netscape Enterprise Server 4.0 sp3.
I'm entirely lost. I don't know if there is a bug in this version (NES 4.0) or if I need other xml libraries or it is a problem of JRE version.
Any comments will be appreciate.
Thanks

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Norbert Clavaux ([email protected]):
Hi,
Last year we built a complete new website, based on XML/XSL.
We assumed all browsers would cope with XSL by now, but that was far to optimistic.
Our company planned to launch the new site this december, but XSL is giving us some major problems:
*** All our customers are obliged to use Internet Explorer 4/5.x. Some don't like that at all: they stick to Netscape.
*** IE users have to download and install the MS-XSL parser. At our pilotsites this is giving a lot of trouble and frustration.
I heard that it is possible to do the parsing at the serverside, using XSLT, creating HTML.
HOW CAN WE INSTALL / IMPLEMENT THIS OPTION IN OUR CONFIGURATION?
(PL/SQL / IAS 9i / Sun Solaris / Oracle 8.1.2)
Thanks in advance,
Norbert Clavaux
Nederlandse Bibliotheek Dienst
The Netherlands<HR></BLOCKQUOTE>
You could use DB Prism / Cocoon CMS.
This CMS is built on top of Apache Cocoon Framework and DB Prism servlet engine.
This CMS stores the assets in the DB (CLOB) and applys the stylesheet at runtime.
If you need more information about this CMS look at is free.
This CMS builts the DB Prism web site at www.plenix.com/dbprism/
Best regards, Marcelo.

Problems with weblogic clustering in 6.1 sp3

We have spent a lot of time trying to get our application deployed to
          a cluster using weblogic 6.1 sp3 and we consistently receive a failure
          when we attempt to start the managed server. This was not a problem
          with weblogic sp1--we got our application to deploy to the cluster
          successfully; although there was another weblogic bug there with
          clients accessing EJB clusters--we won't go into that here...
          We have tried this on both a Windows 2000 machine and an HP machine
          running weblogic sp3. The same error occurs on both platforms.
          The error in deploying our application to the cluster against weblogic
          sp3 looks to have to do with our custom security realm. Inside our
          custom realm we make use of a configurable providerUrl which we set to
          the cluster address/port. The custom realm makes a call where it
          passes in the providerUrl to:
               weblogic.management.Helper.getMBeanHome(..., providerUrl,...)
          When we have our providerUrl set to the cluster address/port--e.g.,
               t3://clustermember1:7001
          and attempt to start the managed server we get the error:
          Starting WebLogic Server ....
          Connecting to http://adminserver:7117...
          The WebLogic Server did not start up properly.
          Exception raised:
          weblogic.management.configuration.ConfigurationException:
          clustermember1 not found
               at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:1084)
               at weblogic.management.Admin.initialize(Admin.java:340)
               at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:359)
               at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:206)
               at weblogic.Server.main(Server.java:35)
          Reason: Fatal initialization exception
          When we have our providerUrl set to the admin server address--e.g.,
               t3://adminserver:7117
          everything starts up fine.
          Does anyone know why this would work on sp1 and not sp3 of weblogic
          6.1?
          We verified that all passwords are correct and everything else we
          could determine--any ideas would be helpful.
          We don't want the providerUrl to point at our admin server, we want it
          to point at the cluster address/port.
          When we get the managed server error, we received this error on the
          AdminServer:
          2002-08-15 16:52:23,019 ERROR [ExecuteThread: '11' for queue:
          'default'] (com.msa.gabriel.share.security.wlrealm.GabrielRealm) -
          Caught naming exception null; throwing RuntimeException.
          javax.naming.CommunicationException. Root exception is
          java.net.ConnectException: t3://tomtate.msais.com:7119: Destination
          unreachable; nested exception is:
               java.net.ConnectException: Connection refused; No available router to
          destination
               at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:155)
               at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
               at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:307)
               at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:211)
               at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:149)
               at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:665)
               at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
               at javax.naming.InitialContext.init(InitialContext.java:222)
               at javax.naming.InitialContext.<init>(InitialContext.java:198)
               at com.msa.gabriel.share.security.wlrealm.GabrielRealm.getNamingContext(GabrielRealm.java:416)
               at com.msa.gabriel.share.security.wlrealm.GabrielRealm.getConnection(GabrielRealm.java:347)
               at com.msa.gabriel.share.security.wlrealm.GabrielRealm.access$000(GabrielRealm.java:51)
               at com.msa.gabriel.share.security.wlrealm.GabrielRealm$2.run(GabrielRealm.java:225)
               at weblogic.security.acl.Security.doAsPrivileged(Security.java:489)
               at com.msa.gabriel.share.security.wlrealm.GabrielRealm.myDoAsPrivileged(GabrielRealm.java:578)
               at com.msa.gabriel.share.security.wlrealm.GabrielRealm.getUser(GabrielRealm.java:221)
               at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:832)
               at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:696)
               at weblogic.security.acl.Security.getCurrentUser(Security.java:250)
               at weblogic.servlet.security.internal.SecurityModule.auditPerm(SecurityModule.java:356)
               at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:205)
               at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2518)
               at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2260)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          <Aug 15, 2002 4:52:23 PM EDT> <Error> <HTTP>
          <[WebAppServletContext(8091823,wl_management_internal2,/wl_management_internal2)]
          Servlet failed with Exception
          java.lang.RuntimeException
               at com.msa.gabriel.share.security.wlrealm.GabrielRealm.getUser(GabrielRealm.java:260)
               at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:832)
               at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:696)
               at weblogic.security.acl.Security.getCurrentUser(Security.java:250)
               at weblogic.servlet.security.internal.SecurityModule.auditPerm(SecurityModule.java:356)
               at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:205)
               at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2518)
               at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2260)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          Thanks for any help.
          Rich


Bottom line:
          In our custom realm we were not handling user guest correctly. Even if you
          have guest user disabled, Weblogic seems to have hard-coded guest to
          send messages to the cluster every-so-often. Not sure there--couldn't get
          an answer out of bea as to exactly why we see guest still being used...
          It seems that with sp3, the user guest interaction started happening earlier
          than it did with sp1, consequently making our realm code fail when trying to
          retrieve the guest user like someone we knew about in our system.
          Hence, our getUser and authUserPassword methods now return null for both
          users guest and system, making the secondary realm (file realm) be used to
          authenticate and resolve guest & system. BEA helped get our code fixed;
          however, we still don't have a lot of depth in understanding Weblogic
          server's use of guest...
          Apparently, in 7.x the guest & system user behavior and configuration is
          different also... We'll see when we start digging into that migration.
          Rich
          [email protected] (Rich Koch) wrote in message news:<[email protected]>...
          > Thanks for the responses--we're working with weblogic support now. We
          > think that the custom realm that we have [the developer that wrote it
          > left the company] is the problem.
          >
          > The original developer was told by someone to check:
          > weblogic.security.acl.internal.ClusterRealm.THE_ONE != null
          >
          > In order to determine if the JNDI was available/ready for the whole
          > cluster.
          >
          > It seems that the meaning/setting of THE_ONE changed with this respect
          > from
          > sp1 to sp3--i.e., this is no longer a valid test to tell us if the
          > JNDI is
          > ready for the cluster.
          >
          > We believe this was used because the 'system' user has to be
          > authenticated before the custom realm is up. Originally, before this
          > check was in place, an exception was received when authenticating
          > 'system'. This appears to be a weblogic limitation/issue. Support
          > has told us that this is different in weblogic 7.0. Unfortunately, we
          > can't upgrade from 6.1 yet.
          >
          > We'll post the solution when this gets figured out.
          >
          > Rak
          >
          > "Sabha" <[email protected]> wrote in message news:<[email protected]>...
          > > There was a security restriction enforced from sp2/sp3 onwards in terms of
          > > looking up mbeans from admin server.
          > >
          > > This might cause things to fail if you are attempting to lookup Mbeans with
          > > guest priviliges from admin server. Also, can you try doing the following:
          > >
          > > Run " java weblogic.Admin -url adminServer -username system -password
          > > .... -GET -pretty -type Server" and check whether the named clustermember1
          > > is available in the list or not.
          > >
          > > Also you seem to be getting some security exception - can you check that.
          > >
          > > t3://tomtate.msais.com:7119: Destination
          > > unreachable; nested exception is:
          > >
          > > --- Try running weblogic.Admin PING on this one and see whether you are
          > > able to reach this server upon the error message.
          > >
          > > --Sabha
          > >
          > > "Rich Koch" <[email protected]> wrote in message
          > > news:[email protected]...
          > > > We have spent a lot of time trying to get our application deployed to
          > > > a cluster using weblogic 6.1 sp3 and we consistently receive a failure
          > > > when we attempt to start the managed server. This was not a problem
          > > > with weblogic sp1--we got our application to deploy to the cluster
          > > > successfully; although there was another weblogic bug there with
          > > > clients accessing EJB clusters--we won't go into that here...
          > > >
          > > > We have tried this on both a Windows 2000 machine and an HP machine
          > > > running weblogic sp3. The same error occurs on both platforms.
          > > >
          > > > The error in deploying our application to the cluster against weblogic
          > > > sp3 looks to have to do with our custom security realm. Inside our
          > > > custom realm we make use of a configurable providerUrl which we set to
          > > > the cluster address/port. The custom realm makes a call where it
          > > > passes in the providerUrl to:
          > > > weblogic.management.Helper.getMBeanHome(..., providerUrl,...)
          > > >
          > > > When we have our providerUrl set to the cluster address/port--e.g.,
          > > > t3://clustermember1:7001
          > > >
          > > > and attempt to start the managed server we get the error:
          > > >
          > > > Starting WebLogic Server ....
          > > > Connecting to http://adminserver:7117...
          > > >
          > ***************************************************************************
          > > > The WebLogic Server did not start up properly.
          > > > Exception raised:
          > > > weblogic.management.configuration.ConfigurationException:
          > > > clustermember1 not found
          > > > at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:1084)
          > > > at weblogic.management.Admin.initialize(Admin.java:340)
          > > > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:359)
          > > > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:206)
          > > > at weblogic.Server.main(Server.java:35)
          > > > Reason: Fatal initialization exception
          > > >
          > ***************************************************************************
          > > >
          > > > When we have our providerUrl set to the admin server address--e.g.,
          > > > t3://adminserver:7117
          > > >
          > > > everything starts up fine.
          > > >
          > > > Does anyone know why this would work on sp1 and not sp3 of weblogic
          > > > 6.1?
          > > > We verified that all passwords are correct and everything else we
          > > > could determine--any ideas would be helpful.
          > > >
          > > > We don't want the providerUrl to point at our admin server, we want it
          > > > to point at the cluster address/port.
          > > >
          > > > When we get the managed server error, we received this error on the
          > > > AdminServer:
          > > >
          > > > 2002-08-15 16:52:23,019 ERROR [ExecuteThread: '11' for queue:
          > > > 'default'] (com.msa.gabriel.share.security.wlrealm.GabrielRealm) -
          > > > Caught naming exception null; throwing RuntimeException.
          > > > javax.naming.CommunicationException. Root exception is
          > > > java.net.ConnectException: t3://tomtate.msais.com:7119: Destination
          > > > unreachable; nested exception is:
          > > > java.net.ConnectException: Connection refused; No available router to
          > > > destination
          > > > at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:155)
          > > > at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
          > > > at
          > > weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
          > > textFactoryDelegate.java:307)
          > > > at
          > > weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
          > > textFactoryDelegate.java:211)
          > > > at
          > > weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
          > > ory.java:149)
          > > > at
          > javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:665)
          > > > at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
          > > > at javax.naming.InitialContext.init(InitialContext.java:222)
          > > > at javax.naming.InitialContext.<init>(InitialContext.java:198)
          > > > at
          > > com.msa.gabriel.share.security.wlrealm.GabrielRealm.getNamingContext(Gabriel
          > > Realm.java:416)
          > > > at
          > > com.msa.gabriel.share.security.wlrealm.GabrielRealm.getConnection(GabrielRea
          > > lm.java:347)
          > > > at
          > > com.msa.gabriel.share.security.wlrealm.GabrielRealm.access$000(GabrielRealm.
          > > java:51)
          > > > at
          > > com.msa.gabriel.share.security.wlrealm.GabrielRealm$2.run(GabrielRealm.java:
          > > 225)
          > > > at weblogic.security.acl.Security.doAsPrivileged(Security.java:489)
          > > > at
          > > com.msa.gabriel.share.security.wlrealm.GabrielRealm.myDoAsPrivileged(Gabriel
          > > Realm.java:578)
          > > > at
          > > com.msa.gabriel.share.security.wlrealm.GabrielRealm.getUser(GabrielRealm.jav
          > > a:221)
          > > > at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:832)
          > > > at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:696)
          > > > at weblogic.security.acl.Security.getCurrentUser(Security.java:250)
          > > > at
          > > weblogic.servlet.security.internal.SecurityModule.auditPerm(SecurityModule.j
          > > ava:356)
          > > > at
          > > weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(Servle
          > > tSecurityManager.java:205)
          > > > at
          > > weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
          > > ntext.java:2518)
          > > > at
          > weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
          > > :2260)
          > > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          > > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          > > > <Aug 15, 2002 4:52:23 PM EDT> <Error> <HTTP>
          > > >
          > > <[WebAppServletContext(8091823,wl_management_internal2,/wl_management_intern
          > > al2)]
          > > > Servlet failed with Exception
          > > > java.lang.RuntimeException
          > > > at
          > > com.msa.gabriel.share.security.wlrealm.GabrielRealm.getUser(GabrielRealm.jav
          > > a:260)
          > > > at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:832)
          > > > at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:696)
          > > > at weblogic.security.acl.Security.getCurrentUser(Security.java:250)
          > > > at
          > > weblogic.servlet.security.internal.SecurityModule.auditPerm(SecurityModule.j
          > > ava:356)
          > > > at
          > > weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(Servle
          > > tSecurityManager.java:205)
          > > > at
          > > weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
          > > ntext.java:2518)
          > > > at
          > weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
          > > :2260)
          > > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          > > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          > > >
          > > >
          > > > Thanks for any help.
          > > >
          > > > Rich

[HOWTO] DRI with Open-Source ATI drivers

Hi, I've recently got DRI working on my ATI Radeon 9600 pro with the open source drivers so I'll try to explain you my method expecting this will be useful for you...
First, be sure you have the driver installed :
# pacman -S xf86-video-ati
And now edit your xorg.conf like this :
Section "Module"
Load "dri"
Load "glx"
EndSection
Section "Device"
Identifier "ATI Radeon 9600 Pro (RV350)"
Driver "radeon"
BusID "PCI:1:0:0"
VendorName "ATI Technologies Inc."
EndSection
And at the end of the file add :
Section "DRI"
Mode 0666
EndSection
That's all for the xorg.conf now...
Then, we have to load the needed modules at startup so in rc.conf add the modules in this order :
MODULES=(sis_agp agpgart radeon drm)
PS: I have a sis AGP chipsets you have to replace 'sis_agp' by your AGP chipset...
Now reboot your computer and lunch
glxinfo | grep 'direct rendering'
which may ouput :
direct rendering: Yes
If no, read the Xorg log file (/var/log/Xorg.0.log) and look for the lines which start whith (WW) or (EE) to found the problème...
I think all it's good run glxgears to see DRI in action and now we go to add some options to the "Device Section" in the xorg.conf :
Identifier "ATI Radeon 9600 Pro (RV350)"
Driver "radeon"
BusID "PCI:1:0:0"
VendorName "ATI Technologies Inc."
Option "AGPMode" "8"
Option "AGPFastWrite" "true"
Option "RenderAccel" "true"
Restart the X server and that's all...
Bonus : Transparency and Shadow
Edit the xorg.cong and add this lines after the Module Section :
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
Option "DAMAGE" "true"
EndSection
And this option to the Device Secton :
Option "backingstore" "true"
Restart again the X server and now you can see... NOTHING!! :shock:
So install 'xcompmgr' and 'transset' to see something :
# pacman -S xcompmgr transset
Then do
xcompmgr -c
and now you may see the shadow of the windows...
Links :
man radeon
DRI with ATi Open-Source Drivers
Xorg X11 and Transparency

hmm, it didn't help.
btw: I just remembered I had turned agpfastwrites off in my bios (reviews tell it's a bad idea to use fastwrites with a radeon 9600) So I tried to put it back on, and now X completely freezes my pc when it starts, so I've turned it back off
[offtopic]If you screw up x so it locks your pc, and x is started by default (default runlevel is 5), are the any grub parameters or something else to disable x from starting? otherwise I need a gentoo live cd to recover (the arch live cd won't detect my raid)[/offtopic]
Here a part of my xorg.log. As you can see it complains the r300 mesa driver isn't included, is that normal? I can't find how I should install it...
and the agpdmamode option is also ignored as you can see
(**) RADEON(0): RADEONScreenInit c0000000 0
(**) RADEON(0): Map: 0xc0000000, 0x08000000
(==) RADEON(0): Write-combining range (0xc0000000,0x8000000)
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x8227a90)
(**) RADEON(0): Read: 0x00080002 0x00020020 0x00000000
(**) RADEON(0): Read: rd=2, fd=32, pd=2
(**) RADEON(0): RADEONSaveMode returns 0x8227a90
(WW) RADEON(0): Enabling DRM support
*** Direct rendering support is highly experimental for Radeon 9500
*** and newer cards. The 3d mesa driver is not provided in this tree.
*** A very experimental (and incomplete) version is available from Mesa CVS.
*** Additional information can be found on http://r300.sourceforge.net
*** This message has been last modified on 2005-08-07.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:03:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:03:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xe1534000
(II) RADEON(0): [drm] mapped SAREA 0xe1534000 to 0xb78a5000
(II) RADEON(0): [drm] framebuffer handle = 0xc0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f00421b [AGP 0x10de/0x01e0; Card 0x1002/0x4150]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xaf67b000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xaf67a000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf47a000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xaef9a000
(II) RADEON(0): [drm] register handle = 0xeb000000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param
(**) RADEON(0): RADEONInitMemoryMap() :
(**) RADEON(0): mem_size : 0x08000000
(**) RADEON(0): agp_size : 0x08227968
(**) RADEON(0): agp_base : 0x08227968
(**) RADEON(0): MC_FB_LOCATION : 0xc7ffc000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1400x1050@85 179.30 1400 1504 1656 1912 1050 1051 1054 1103 (24,32) -H +V
1400x1050@85 179.30 1400 1504 1656 1912 1050 1051 1054 1103 (24,32) -H +V
(**) RADEON(0): Pitch = 11534512 bytes (virtualX = 1400, displayWidth = 1408)
(**) RADEON(0): dc=17930, of=35860, fd=159, pd=2
(**) RADEON(0): RADEONInit returns 0x8228440
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x8228440)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0xc7ffc000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x0000000c 0x0001009f 0x00000000 (0x0000bf00)
(**) RADEON(0): Wrote: rd=12, fd=159, pd=1
(**) RADEON(0): GRPH_BUFFER_CNTL from 30354c4c to 204a7c7c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1050) to (1408,1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 7139
(II) RADEON(0): Will use back buffer at offset 0x16b0000
(II) RADEON(0): Will use depth buffer at offset 0x1c54000
(II) RADEON(0): Will use 96256 kb for textures at offset 0x2200000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xc7ffc000 is: 0xc7ffc000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30354c4c to 204a7c7c
(II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 176
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 7136
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(WW) RADEON(0): Option "EnableAGPDMA" is not used
(**) RADEON(0): RADEONScreenInit finished

X-FI Titanium, NOISE with 2.17.0007 Drivers (XP SP3)

Similar Messages

Maybe you are looking for