X Value for a correcting CMAx of Y channel

Hi There,
I am tryinig to read in the Cmax of a Y channel. This is fine, I have no issues. But would like o get the corresponding time value(X -channel) when CMax occurs. For this I check each value of the channel using CHDX and get the X value, hence involves lot of processing time.
Can anyone let me know if ther is a quick way to get this done?
Thanks,
Priya

Hi ATE,
This can be done with a relatively simple Formular Calculator function.
In my example below I have two channels, called "Time" and "Noise". I
want to find the vlue in "Time" where "Noise" reached it maximum value.
      R1:=ChD(find('Noise'=CMax('Noise')),'Time')
R1       is a REAL type DIAdem variable that is available to DIAdem users to store calculation results
ChD    is a variable that contains the value of a cell, it has two parameters, "Channel" and "Row"
find      is a function in DIAdem that allows
you to search for the row number in a channel where a condition is true
The above example will find the row number (integer) which contains the maximum value of "Noise" find('Noise'=CMax('Noise'))
It will then transfer the value found in that row in the "Time" channel to the variable R1
Let me know if you need anything else,
   Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Similar Messages

Problem to get Correct Value for Message Id in XI (Inbound channel)

Hi Experts
I have XI scenario i.e. SOAP to RFC.
I am calling RFC and getting Response which contais Messageid Field(Raw Data).
But while getting Response in Inbound Channel ,I ma getting Junk Value For Message Id.
In RFC Data element for Message id is SXMSMGUID.(data tpe Raw No Of character 16 and Output Length 32)
I am accessing some RFC functions from XI which return parameters in the RAW format.[RAW: Uninterpreted byte string.]
For example: If I execute a RFC from the abap system (using transaction se37), one of the results is "5ECD6F4D6C6E3242921025FE74AC5153"
When I call the RFC from XI, response for same parameters is "Xs1vTWxuMkKSECX+dKxRUw==".
Is there any way to get RAW data in correct Format?
when i import RFc in XI it's data type becomes xsd:base64Binary.
I created one customized data element having data type RAW (32 length) and even Character(32-50 length)
In this case RFC gives correct value but when Sceanaro runs in XI,it get Wrong data in XI Inbound channel.
Also disturbed value and place of other Fields.
Thanks in advance .

Hi
Check this forum post.. same prob as yours
Re: Problem in RFC Lookup UDF in getting MessageID
fixed by changing the datatype other than RAW in FM
also,
Data type RAW imported to ABAP from Java
Regards
Vishnu

Which are the setting values for the Virtual CTI Driver? (Siebel Communica)

hi everybody,
the application I'm using is Siebel Communications 8.1.
I am learning about integration processes with the Siebel Communications Server Administration Guide. One of the points or topics there is the use of the Virtual CTI to integrate your Siebel Business Applications with Oracle Contact Center Anywhere (as in the bookshelf described).
I've read, with this driver agents can access communications functionality using the communications toolbar.
The Virtual CTI is a driver provided by Oracle. You can't see it listed on the Administration -> Communications ----> Communications Drivers and Profiles. So I guess it is important to add this driver to the list.
I have questions about that:
1. Should I add this driver to the list? or when can I do that?
2. Which are the setting values for the mentioned driver?
- Communications Channel?
- Inbound Yes
- Outbound Yes
- Interactive
- Channel string
- Library name
Could anybody help me? I would appreciate that.
Regards

Thanks for the reply KT.
I am not sure how to set a new custom style, but will look it up. If you have a url that points to the topic I would appreciate it.
Thanks,
Rhek

Contract net value for Header Statistics is not correct

There is issue with value contract. The net value for Header Statistics is not showing correctly for some contracts. Especially, when we delete the PO line items or reverse all entries (GR and IR) for PO line item.
Contract has one line with account category ‘U’. The target value is 300,000.00 and total quantity released to date is 160,000. The net value for Header Statistics should be 140,000 but it is showing 600,000 which is over (double) the target value and user cannot release any further PO reference to this contract.
Earlier I defined net price for line item 300,000 and I changed net price to zero and execute report RM06ENP0 but it doesn’t work.
Please share your experience and thoughts.
Thanks,
Shah.

Hi Jurgen,
There are few Purchace orders with multiple line items and each line item for Purchase orders referencing the same line and same contract.
There is only one Purchase order has two deleted lines against this contract.
Theses deleted line's net price has changed to zero and there is no PO history.
Contract released order value is correct as there is only one line, but net price is wrong. and user is getting error for target value is excedeed by $nnn when trying to create purchase order.
Thanks,
Shah.

Stock Ledger Report in Day Wise not giving correct values for Opening Stock

Dear Experts,
I m working on Sock ledger report to give the day wise data.
since yesterdays closing Stock will become opening stock of today,
To get Opening Stock,
I have restricted the stock key figure with 2 variables on calday
 (DATE FROM var with <=(Lessthan or equal to) and offset -1
 DATE TO var with <=(Lessthan or equal to) and offset -1)
To get Closing Stock,
I have restricted the Stock key figure with 2 variables on calday
 (DATE FROM var with <=(Lessthan or equal to)
 DATE TO var with <=(Lessthan or equal to) )
But in the output Opening stock values are not coming correctly and for given range of dates,
for last date, opening stock is showing as Zero.
Could you please tell me how can I achieve the correct values for opening stock.
Thanks in advance.

Hi Arjun,
Seems like you are making it more complicated. What is your selection screen criteria?
Ideally you should only use the offset.
You will have say Calday in rows and stock in Column
____________Opening Stock_____________Closing Stock
01/06/2009___(Closing stock of 31/05/2009)_(Stock of 01/06/2009)
02/06/2009___(Closing stock of 01/06/2009)_(Stock of 02/06/2009)
03/06/2009___(Closing stock of 02/06/2009)_(Stock of 03/06/2009)
So, from above scenario, create one RKFs and include Calday in it. Create a replacement path variable on calday and apply the offset as -1.
So, your Opening Stock will be calculated by closign stock of previous day.
- Danny

Font in SVG file is not displayed correctly. "Error in parsing value for 'font-size'. Declaration dropped."

I am trying to view an SVG file but it is unreadable because the font in the diagram is too large.
In the Firefox error console, I see a CSS error:
Error in parsing value for 'font-size'. Declaration dropped.
What's happening?
(Please cc your reply to [email protected])

Firefox's Error Console (Ctrl+Shift+J) collects lots of those style rule warnings. Some style rules only work in particular browsers (such as "filter" which is for IE), so Firefox notes that it doesn't recognize them. This information is more for the web developer's benefit than yours, since you can't do much to change the site.
To see serious errors and filter out the style warnings, click the Errors button at the top. Hopefully a lot less clutter.
Anyway, are you asking because something isn't working correctly?

Retrieve correct value for SelectOneChoice

Does anyone know how to retrieve the correct value in a SelectOneChoice for an inline table? What should I use to get the value of a selectOneChoice column? for example "#{row.CodeId}" does not return the correct value, since the column is not in the parent table, so I use the <af:selectOneChoice value="#{detailRow.CodeId}" ... it doesn't work. It retrieve the correct value in a text format and lose the dropdown list style
This is what I've used to do the binding:
<af:selectOneChoice value="#{detailRow.CodeId}"
label="Code ID"
id="selectOneChoice1"
autoSubmit="true"
valuePassThru="true">
<af:forEach var="li"
items="#{bindings.codeLookupVO1.rangeSet}">
<af:selectItem value="#{li.CodeId}"
label="#{li.CodeText}"/>
</af:forEach>
</af:selectOneChoice>
Plus I have done the table binding for the codeLookupVO and created an iterator for it too.
Does anyone know what should I use to get the correct value for the row in the detailStamp ?
I use JDEV 10.1.3.3 & ADF & BC
Your help is greatly appreciated... There are many listing in regards to SelectOneChoice for single table, but I have not seen anything related to an inline table selectOneChoice... Can one of you expert help and guide me to the correct path!
Thanks
Sara

usually web service call process one row or one message, hence the default value is set to less than a min, since its processing is not expected to take more than that
the affect of increaing the value to a higher number is the Engine will wait for Max that amount of time for the response to come back in a ideal situation it may not take that long, but if there is any problem on the server side like application crash or for some reason the response was not sent back to the engine, then engine will wait for that much amount of time and then timeout. It will hang
you might have seen this with Designer if you configure Adapter Datastore and if Adapter process crashes, the Desginer hangs, since the timeout value is set to 3 hrs, so you may have to think of trouble shooting such situation
what is the DS version, I think this value is exposed in UI, available at Design time

Error Message: The syntax of the value for prompt 'p_phone_num' is incorrect. Please correct the syntax and try again.

Post Author: helpwithcr
CA Forum: General
" The syntax of the value for prompt 'p_phone_number' is incorrect. Please correct the syntax and try again."
I am getthing this error while I tried to pass the value from an oracle package to the web when the the crystal report viewer kicks in.
I found the source of the error. Its just a paranthesis that I used with the phone number inside the function.... The function looks like this
function phone_number
return varchar2
is
begin
return '(123) 456 - 789';
end phone_number;
I really dont want that paranthesis to go. Its the format that everyone wanted. But they dont want that to be static on the report also
Please help
Thanks
helpWithCr

Sir, you are a legend!!!
Many thanks for putting me on the right track...
Here's where I went wrong and how I fixed it.
First I installed the Azure Pack: MySQL Extension on the MySQL server.
This was wrong, it needs to be installed on the WAP server/s.
So I installed the extension on the WAP server and it still didn't work.
So I uninstalled the extension from the MySQL server and it still didn't work.
So I also installed the MySQL Connector/Net on the WAP server and it worked.
This eventually fixed it.
What I will say is that in the documentation it doesn't mention installing the MySQL Connector/Net from the web platform installer on the WAP server (unless I have completely missed this)?
Thanks again :-)
Microsoft Partner

Error while reading UcdContext [trying to read / set application values for users]

Hi,
I am trying to write a program to store user selected values on NW7.3 Portal using "User Content Directory". I can see and read some code snippets on how to set and read the context but I am getting one error after another.
The error message I am getting is
"com.sapportals.portal.pcd.gl.PcdGlContext:service:[email protected]entClassLoader@84507ed@alive incompatible with interface com.sapportals.portal.pcd.gl.IPcdContext:sap.com/[email protected]der@f46d103@alive ". Code snippet is as given below at the end of the message.
1) I tried different ways to have a lookup and always gave message as "look up not found" and for pcd:portal_content came up with above error.
2) Once I read the UCD context, I would like to store some values based on user selection and store them. User may change the values whenever they like and I will be using the values for other purposes in another application.
3) Has any one successful in setting and reading UCD Context in NW 7.3. Will it be possible to share such sample code as the code snippets at http://help.sap.com/saphelp_nw73ehp1/helpdata/en/4a/8e1bce28e24dd8abd9f4de05e5587d/content.htm are not much of use unless I am able to read the UCD.
Thanks for your help!
Regards,
Raju
TestingUCD is my test application and the following is code snippet
InitialContext initialContext = null;
IPcdContext pcdCtx;
Hashtable env = new Hashtable();
env.put(UCD_INITIAL_CONTEXT_FACTORY, UCD_INITIAL_CONTEXT_FACTORY);
env.put(Context.SECURITY_PRINCIPAL, request.getUser());
env.put(Constants.REQUESTED_ASPECT, IPcdAttribute.PERSISTENCY_ASPECT);
try{
initialContext = new InitialContext(env);
//response.write("Before pcdCtx lookup");
try {
pcdCtx = (com.sapportals.portal.pcd.gl.PcdGlContext) initialContext.lookup("pcd:portal_content");
} catch(Exception e){
response.write("Some problem with lookup" + e.getMessage());

Hi,
There are quite few differences in the standard code snippet given by SAP Help on UCD and the once that you put above in the question.
Below is standard snippet.
Hashtable<Object, Object> env = new Hashtable<Object, Object>();
env.put(Context.INITIAL_CONTEXT_FACTORY,
IPcdContext.UCD_INITIAL_CONTEXT_FACTORY);
env.put(Context.SECURITY_PRINCIPAL, user);
InitialContext ctx = new InitialContext(env);
pcdCtx = (IPcdContext) ctx.lookup("");
============================
Check the ones highlighted in BOLD and compare them in your code. In your code when ur doing initial lookup you are not using the Correct class type cast for the returned lookup object!
Your code shows as below:
pcdCtx = (com.sapportals.portal.pcd.gl.PcdGlContext) initialContext.lookup("pcd:portal_content");
But may be it shd have been something like below:
pcdCtx = (IPcdContext) initialContext.lookup("pcd:portal_content");
Pls verify and hopefully this resolves your issues around look up.
Thanks,
Swapna Priya.

Incorrect initial value for char 0FISCYEAR in i_t_range in DTP filter prog

Gurus
I need your help , I have searched all the threads but could not find anything which can help me resolve this issue.
I have a filter in DTP as a routine to get the year from system date.
The program is correct for syntex but when I trigger the DTP I am getting the following message , not sure what needs to be added to my programe.
Incorrect initial value for characteristic 0FISCYEAR in i_t_range
Message no. DBMAN889
appreciate any help I can get to reoslve this ASAP.
Thanks in advance

Hi
Pleae check if you have initialised with a NULL value . "blank/null" is indeed not a valid characteristic value for fiscal period. Fisc.per is of type NUMC which means all characters have to be numerical. The initial value should be "0000000" .
Thanks,
Rajesh.
Please provide points to answers if you find them helpful

Uploading values for an image field in a web app. Nothing displays in layout.

I've uploaded the values (using the import) for a field defined as an image in a web app. When I try to display the field, nothing shows up. The value correctly shows up when I look at Web App items after the upload / import. I've uploaded the same value in a text field, just to learn what was happening, and the text field displays the image just fine when added to the layout.
I would like to use the image field type, as it's easier to correctly create the link when the web app is updated in the future.
Here is what works in the layout: <a href="{tag_link to page}"> <img alt="" class="column66_award_thumb" id="thx" src="{tag_image thumb}" /></a>
Note that {tag_image thumb} is a text field with the link stored in it. The value for each Web App Item which populates this field is a link to the image. (i.e. /Awards/139.jpg)
Here is what I want to work: <a href="{tag_link to page}"> <img alt="" class="column66_award_thumb" id="thx" src="{tag_thumbnail image_value}" /></a> , where {tag_thumbnail image_value} refers to a field defined as an image in the web app. It has the exact same value as {tag_image thumb}. I just copied the field values in the Excel spreadsheet (saved as .csv) when I uploaded it.
It looks like the image field works fine only when I manually create it in the web app. If this is the case, using the upload capability disables any ability to use the image field type.
Is there a workaround for this? Am I missing something?
The page I'm working on is http://www.e-a-a.com/awards When you view the source, you can see that the small thumbnail images are displaying just fine. (I'm using the text field). Whenever I substitute the image field name {tag_thumbnail image}, {tag_thumbnail image_nolink}, or {tag_thumbnail image_value}, the src value is always null.
How do I fix?

Hi there,
To do it properly you need to resize the image. Prefably before you put it into BC. While you can for scale the image in CSS you do not want to do this. Why? Because the images are still very big and likely not optimised as they should be for the web.
This means the page with these images will take a very long time to load for people, and people wont be to happy about that viewing your site.
You need to use software such as photoshop if you have it or iphoto on a mac for example to edit, crop and size images before you upload them. If you do not have anything you can use free web based tools such as this one:
http://pixlr.com/editor/
You can also do this within BC itself in the file manager. If you click the image you can see options to resize it. The downside of that is that is done by pure math. It does not know what is in the photo and the results can make the image look squished etc.

How to get the list of values for a dynamic parameter using Web Services SDK?

I am struggling to get the list of values for a dynamic parameter of a report.I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.Thx 

Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.Please let me know if you can think of an alternative to look at.Thanks a lot,Catalin

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

To show all months of qty values for each fiscal year in report?

Our cube contains different fiscal years of order qty/delivered qty for a material (e.g. material A). We use fiscal year variant V9 (Oct. - Sep). We would like to generate the following query result to list the material, order qty, fiscal year, and then for each calender month, the delivered qty value for the corresponding fiscal year:
Column title:
Material --- Order Qty --- Fiscal Year --- Oct --- Nov --- Dec --- Jan --- Feb --- Mar --- Apr --- May --- Jun --- Jul --- Aug --- Sep
Just give two rows of data for material A:
1st row data example:
A (material) --- 23 (Order Qty) --- 2006 (fiscal year) --- 2 (delivered qty in Oct of the calendar year 2005 ) --- 4(delivered qty in Nov of the calendar year 2005 ) ---1 (delivered qty in Dec of the calendar year 2005 ) --- 5 (delivered qty in Jan of the calendar year 2006 ) --- .... 2 (delivered qty in Sep. of the calendar year 2006)
2nd row data example:
A (material) --- 45 (Order Qty) --- 2007 (fiscal year) --- 3(delivered qty in Oct of the calendar year 2006 ) --- 6 (delivered qty in Nov of the calendar year 2006 ) ---1 (delivered qty in Dec of the calendar year 2006 ) --- 5 (delivered qty in Jan of the calendar year 2007 ) --- .... 2 (delivered qty in Sep. of the calendar year 2007)
How to generate this query?
Thanks!

hi Chandran,
Actually in each row data for material in different fiscal year, all the KFs in columns should be restricted to the fiscal year value. What we do is to use selections other than structure or RKF. What we is following listed in details that you can check if what we do is correct:
Under KF structure:
1. Create a selection for the 1st KF (Order Qty). In this selection, Order Qty is restricted with the characteristic 0FISCYEAR.
2. Create a formular as 2nd KF for the FY value. This formula KF use the value of a formular variable with Replacement Path of the the characteristic 0FISCYEAR. But somehow this KF value shows "X" values in this column. We defined this Replacement Path variable with the Reference Characteristic as 0FISCYEAR and all others keep default. But don't know why this column shows "X" values. We also add 0FISCYEAR to the row, and find the one does have data in the row. Any idea why put it in formular variable onto column not working?
3. Create a selecction for the 3rd KF (Oct). In this selection, restrict Delivered Qty with the characteristic 0CALMONTH2 (Calendar month) and further restrict 0CALMONTH2 to a fixed value: October
4. Create a selecction for the 4th KF (Nov). In this selection, restrict Delivered Qty with the characteristic 0CALMONTH2 (Calendar month) and further restrict 0CALMONTH2 to a fixed value: November.
Then the following steps are similar to step 3 and 4 to create all other Month columns. We wonder in all these selections, would we have to restrict them further with 0FISCYEAR?
Therefore we've got two questions:
1. Why in step 2, the formular variable doesn't work and the FY column shows "X" values?
2. Do we need to further restrict the delivered qty with the characteristic 0FISCYEAR for each month column which corresonding to the fiscal year in the same row?
Thanks alot and we are keeping giving you reward points!

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

X Value for a correcting CMAx of Y channel

Similar Messages

Maybe you are looking for