X1 DVR and Sony A/V Receiver no signal to TV

With the X1 plugged in to the sony have you tried unplugging the X1 power wait 60sec and then plug it back in to see if it starts up on you can see it on the screen?

Let me preface this with that Ive had all the components I'm describing set up for years previously before I moved from my old place to my new. I moved recently and switched to comcast from directv out of availability issues and after setting up my system this week (we were having signal issues for months. After 3 missed no call/no show service appointments and alot of frustration with CS we finally got a tech out here and it turned out we had a defective dvr that needed to be replaced. We got that resolved so we could get to start trouble shooting this.) So to get to the problem Im having with the x1 box currently. I have a roku box plugged into the receiver with a hdmi cable and then have the receiver going to the tv with a hdmi for video and the surround sound system for sound. No issues with this it works fine video and surround sound are working. I plug same cords and everything just to get a baseline into the x1 dvr instead of the roku so nothing is changing other than the actual input device. No signal. Ive played around in the GUI settings for the receiver and cant seem to find anything out of the ordinary or that was changed from my previous set up before I moved other than going from a directv box to a comcast box. Anyone have any suggestions? Ive checked video controls/hdmi controls on both the receiver and the x1 and nothing seems to suggest why this shouldn't work. Ive attached some pictures to show what I mean.

Similar Messages

New channel guide push wiped our dvr and pause / rewind of live tv doesn't work anymore

The new channel guide, which I am not fond of, we found out the day it appeared had wiped out all of our recorded programs, all of our recording schedules and the pause / rewind does not work on our dvr anymore. This would normally be ok waiting for a representative to contact us but having an autistic child at home and having to try and explain why all of the programming we allow him to watch has been wiped has caused a serious problem in our house. If we could have had warning that this was going to happen or even be a possibility we could have tried and done something to work with the situation. Now we are left with a situation where all we are doing is trying to calm our son down. Not fun...

We determined what the problem is. When the channel guide was pushed down, we were remodeling our master bedroom and had the receiver unplugged and unhooked from the wall. Our dvr was acting like a receiver with no hard drive. I plugged the bedroom receiver back in and rebooted the dvr. The dvr is acting as it should. Why would a push reprogram a dvr to act like a diskless receiver?

Adobe FMS 4.5 and Streaming to DVR and Live Not Working

Hello,
I am having some issues with streaming Live and DVR. I am fairly new to the FMS world, but not to the streaming media world.
I am using a FMS server on AWS, version 4.5. I have installed DVRcast on the server and created a test application. I am seeing no errors in the logs, all services are running properly. No errors when connecting to the serve via FMLE. Logged into the Admin Console, I see the connection. In the Adobe Flash Media Playback Setup player, it just buffers. I try to play the rtmp stream in another test player and get a security error. Any suggestions would be greatly appreciated.

Also having the same problem.
Have installed the applications and stream to the server using FMLE with the DVR Auto Record on and the server is receiving the stream.
But there is no file being saved and when I try to connect with a RTMP player it failes to connect, the livedvr_client_test sample code gives back "Main.as : Not connected to FMS yet - Trying again ...."
Normal LIVE streaming works, it is just the application. Followed the PDF to the letter.
Any help with this would be great!
Thank you.

Remote infrared codes for the Sony STR-DE675 receiver

Where can I find the remote infrared codes for the Sony STR-DE675 receiver? They are not in the Owner's Manual, nor on the Sony.com website. Thanks.GBP

If you were getting sound and no picture when you had the Wii hooked up to your surround sound receiver, your TV was probably on the wrong input. You would have needed to use the source or input button on your TV's remote and changed the input to the component 1 choice, since that is the port you stated you plugged the Wii into on the TV.
Your cable remote may not be programmed to work with the blu-ray player. However, I think you're misunderstanding the function of the buttons at the top of your remote labeled TV, Sat/Cab, VCR, etc. Your cable remote doesn't work like a Harmony remote. Pushing those buttons at the top of your cable remote are not like pushing the Watch TV or Watch DVD functions on a Harmony (meaning pushing them doesn't change the TV's input automatically). All those buttons at the top of the remote are for that you're describing are to tell the remote which components to control. For example, you are watching cable TV and just used the remote to change the channel but now you want to adjust the volume. You would have to hit the "TV" button on the cable remote to switch the remote from controlling the cable box to controlling the TV. Otherwise, you'd hit the volume controls over and over and nothing would happen b/c the remote would still think it was controlling the cable box. Only a Harmony remote (or similar universal remote) can change the TV's input with the click of a function button.
And to explain why one must change the TV's input when switching components, I always compare the process to the way a tube TV used to work for those that are new to the flat screen TVs. Think of the way your old TV probably worked - you had to have the TV on channel 3 for your VCR, 4 for cable, etc. The input changing is practically the same thing with just a few more steps, if that helps to make things any clearer. LOL
Nothing I post is an official statment of Best Buy or Geek Squad, it is only a helpful opinion!

Sony STR-DG500 Receiver

I have had a kid mess up the TV settings on the receiver and the volume is terrible. The radio volume through the receiver is good, but the TV volume is very low. I have to play it on max volume most of the time. I have checked all connections and tried other settings with no luck. Any ideas on where to start?? Thanks for any help!!

Kevin Key wrote:
I just installed the 3.0.2 firmware upgrade and I still can't get my Apple TV to transmit HDMI video to my TV via my Sony STR-DH500 receiver. All other components - Blu-Ray player, Scientific Atlanta cable TV converter, and Acer laptop work just fine with the HDMI switch in the tuner.
AppleTv is notoriously fickle with some switches/AV receivers over HDMI.
Question is whether this is due to an over rigorous HDMI implementation by Apple but it would seem odd that other manufacturers just had lax implementations.
Apple TV works when connected directly to the TV, but I really don't want to have to keep swapping HDMI cables.
No, I agree very frustrating. HDMI great when it works!
Have you considered connecting via component to the TV/receiver and analogue or optical audio ?
Is this lack of compatibility due to heavy-handed anti-piracy measures on Apple's part?
Doubt it, it happens with unprotected material presumably too.
Apple TV is the first Apple product I've ever owned, and will likely be the last. There's one good thing about Apple TV: the interface is awesome.
Yes, makes up for lots of other things.
But, I should be able to connect it via an HDMI switch, shouldn't I?
Yes, it's not necessarily AppleTV at fault but when other devices all work it certainly suggests it's the problem.
And Apple won't give me any support over the phone unless I pay $49?!
I wouldn't bother I doubt you'd get anywhere other than being advise to try a different switch or plug into your TV.
Is anyone else having this issue?
Yes, with certain device pairings several posts comment about this.
While some non mainstream brand switches might not be implemented well you'd expect Sony to be ok.
Is there anything else I should try?
Apart from component no.
Is there a hack that can fix this problem?
No.

Sony TV and Sony Home Theater not connecting?

Hi Experts i have got a Sony TV (70W850B) and Sony Home Theater (BDVN9200WB), connected with a high speed HDMI cable with both ARC jack, however no sounds coming out from the speakers when wacthing TV. the facts: 1) the HDMI cable is high speed HDMI cable bought recently, one end plud into the ARC out jack on the receiver and the other end into the TV HDMI 2 (ARC). 2) TV Setting - audio is set for out put as home theatre and 'Subwoofer' 3) Home theater setting - HDMI control is ON, ARC is AUTO. 4) Can auctually operate the home theatre on TV screen via HDMI input, test all speakers are working. 5) Just no sounds when turn on the TV channels or topbox etc Any ideas? Thanks

Hi Jerrypan112,
You may try adding Digital Optical connection from the TV to the Home Theater System if they supports Digital Optical connection.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver.

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver. This only occurred on the rented video and on recorded shows on my cable DVR. previews and other content on Apple TV are fine. Any ideas??

Previews and trailers do not contain 5.1 audio.
If you have recently moved your setup, you may have inadvertently changed some of the settings on your receiver. It certainly sounds as though it is unable to play the 5.1 audio from the Apple TV.

Canon 5dMII and Sony A900 support

New released cameras need ACR and Lightroom support for Canon 5dMII and Sony A900.

Jeff, CS4 shipping dates have not been announced (I'm on the list to be notified when CS4 will ship. There is no announcement... yet speculation of end of October shipping is from adobe saying they expect CS4 to ship in Fourth quarter 2008. no guarantee of that shipping date, until it's announced. In Fourth quarter 2008 could be end of December, we have to wait and see) As for 5DMII the shipping date is rumored at end of November 2008, but not announced, and that date seems to be headed toward mid-December or January.....I do agree that LR2.1 and ACR4.6 will likely be released by Fourth quarter, pending no major bugs are found in either program.
I expect adobe gets cameras for testing and profiling when reviewers received the camera. So, yes, If production cameras are available to a select few I expect adobe, to have the camera and, to be building support for the camera including that support once they complete their profiling; regardless of the camera shipping date.
LJ the unofficial support for the A900 is due to ACR using the A700 raw profile to work with the A900 RAW files. This is not the same as supporting the camera. Yes, it allows A900 owners to work in RAW, but not with the correct profile.

Netflix and Sony Blu Ray players

I've recently purchased a Sony Bdp-S3500 Blu Ray Player to replace my aging BDP -S280. The set up was easy and everything works....except Netflix. I have gone thru every step on the Netflix Website and I have spoken with Sony Support and I still receive an Nw 8-17 cannot connect with Netflix server error. I've been told my Netflix it must be an issue with my ISP. Sony told me I must not have enough of a connection speed. Netflix says its Sony and Sony Says it Netflix servers.   Such nonsense! I just bought my S3500 on Saturday 8/1.   After neither Sony or Netflix have been any help, will not say what the problem is and simply want the customer to do a variety of fixes that WILL NOT WORK...I simply boxed the S3500 and plugged my S280 back in and low and behold....I HAVE NETFLIX AGAIN!!! Clearly with the roll out of the latest Netflix app on 07/28/2015, this has destroyed the connection between Sony and Netflix.   Why neither will admit to this and just simply say sorry...Yes there is an error but we are working to correct this is beyond me.    Sony/Netflix....stop having the customer waste time with dumb fixes and be honest. People appreciate that more than these idiotic robotic responses that you keep feeding us. Again...my old BDP S280 works and receives Netflix but my brand new released in March 2015 Sony S3500 fails to connect every single time. Stop Lying to your customers, tell the truth and fix the PROBLEM!!!!!!!

https://downdetector.com/status/netflix Lilly AndersonNetflix is down on PS4. Please fix.Like · Reply · 15 hrs Jessica Barrera · Palm Desert High SchoolPs3, smat tvs, and bluerays netflix down on all. I can access on computer.Like · Reply · 15 hrs   Bobby Grossman · Porter/Tech at Bill Walsh FordWont let me update. Its update 2.23 on my ps3Like · Reply · Aug 7, 2015 9:35pm   Joni ThriftNetflix works fine on my tablet and laptop. But when I try to watch via my Sony Blu-Ray player, I have connection problems 80-90% of the time. After successfully checking link speed, I get the message: "The process timed out because the server could not be accessed. The network might not be set up correctly" I click "Retry" then get a follow up message of, "Network is down".
I've researched Netflix and Sony troubleshooting and all I get is a bunch of unhelpful tips about updating to latest software (already done) and ensuring internet connection (duh!). Sometimes I'll even successfully watch an episode but then face this issue when I try to move on to the next episode.
Beyond frustrating...Like · Reply · Aug 7, 2015 4:45am Check the link.....   But here are just few with Sony Products Experiencing the same that that Sony and Netflix claim are not happening.....

Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?

Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?

Download Itunes from Apple.com, not from within Itunes.
Redo the install, following the below procedure. However, when you re-install Itunes, right click and run the install as administrator. For Win 7, you have to hold down the cntrl and shift keys when you right click and then "run as administrator" will be an option.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Vista, Win 7 & later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes

Conflict between Client object model and Item Updated Event Receiver in sharepoint 2010

Hello All,
As per my requirement I have a two custom list.
Agent Details
Port Name
Agent Details contains Agent code, Port Name, email, address and phone of Agent. Its possible that one Agent Code is connected with multiple Port Name.
Basically what I am doing is I am getting port name connected with Agent code, using jquery and bind those values with check box(using javascript created dynamically) and bind all with Div tag.
Now when my custom edit form of Agent list open up it shows me different port name binding with checkbox group.
when user select the check box and click confirm button my clicent object model script will run and add this selected value into Port Name list.
After confirm one more button named Save will enable asking user to edit the email, phone or address value and when I click on save my Item updated event fires which update the values of the selected port name(These port name I am getting from port
name list) to Agent Details custom list.
Now when I am trying to update the values my event receiver fires or some times it got stuck(not firing). So could you please help me the possible alternative for this requirements.
Can we user the Ecma Script(Client object model to preserve the value of selectec port) and Item updated event receiver on the same time?
Is anything am doing wrong then please guide me.

Hi,
As I understand, when you updated values in the agent details list the Item updated event receiver got stuck sometimes.
The item update event receiver will fire after the item has been saved, and the client object model script or the Ecma Script runs before the item is saved, so there is no conflict between the client object model script and item update event receiver.
You could find out the reason about the item update event receiver gets stuck by debugging the event receiver.
When you want to debug your event receivers, you have to attach to OWSTIMER.EXE and wait till they are executed. You can control this behavior using the Synchronization attribute. Also, if you’re looking for an easy way to debug an event receiver without
having to manually attach a debugger to your code, you can use the System.Diagnostics.Debugger.Launch() method.
The articles below are about how to debug in the event receiver in SharePoint 2010.
http://sharepoint-kings.blogspot.jp/2013/02/debugging-event-receivers-in-sharepoint.html
http://chakkaradeep.com/index.php/event-receivers-in-sharepoint-2010/
http://sharesaint.com/?p=77
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

New DVR and FiOS remote tablet access

I had to get a replacement DVR recently (bad hard drive). All works well except I can't access the DVR details or program the box through the fios remote app on my tablet. It worked fine for the old box. Also, on the app, the old box still shows up.
I can log onto my account at Verizon. Com and I can program, see what's recorded on the new DVR etc.., but again the old box shows up as the default DVR and I need to always choose the new one on a drop down box for things to work. Again, this is on the Verizon. Com website through the DVR manager.
How do I get rid of the old box on the app. I tried uninstalling and reinstalling the app bit to no avail. Again, the problem is the app, which I would like to get to work with the new DVR.

Ok, I found the problem on the FiOS app. There is a button that can switch which box doors the recording. So I now can see what I'd on the new DVR. But still, not sure how to delete the old box from the list

Random restarts and unable to make/receive calls o...

Okay...has anyone else experienced this problem before.
No problems with all the regular app functions, speed, sound and everything all normal. Except that no calls can come in or out. When calling out, it will show the whole dialing screen, but there will be no dial tone and sometimes the call duration timer will start but i wont be able to hear anything. When someone tries to call in they get the same tone as if the phone is off, and I won't receive any message of a missed call or anything of that sort. I check cell reception, full bars, My Maxis In my case, all seems to be normal.
Only way to solve this is to restart the phone. Then everything returns to normal, calls in and out fine.
Happens to me maybe once a month...
also random self restarts...I might be listening to music while travelling on the LRT and then it will just vibrate and restart. Or at work its just on the table and then it just short vibrate and restart itself...
one more issue is that some of the tiles on my homescreen don't load immediately and lag for 1-2 seconds before the image shows. This happens when I am scrolling up or down and all I see instead of the live tiles are blank tiles of the color I set it to. This only started happening after the tango update. i doubt this is caused by the phone and instead by the software. it does not affect the respective apps or anything else.
Just informing Nokia of these issues with my lumia 710... I will try a hard reset soon to see if this will solve the problems for good.

What phone?
What zip code?
What have you tried to troubleshoot the problem?
Have you powered it down and restarted?
More information would be helpful.

I want to delete my mobile me account not just from my iPhone but from existence. I want to delete it so that no emails can be received to it, and the sender would receive an undeliverable message. Is this possible?

I want to delete my mobile me account not just from my iPhone but from existence. I want to delete it so that no emails can be received to it, and the sender would receive an undeliverable message. Is this possible?

No, you can stop using the account, but you cannot delete it.

HT1349 I need to turn off the "find my phone" feature on my iPhone 5. The company I worked for took back their iPhone and now I cannot receive texts on my new LG F6 phone. Can I do this w/o the serial number?

I replaced my iPhone 5 with an LG F6 phone and now I cannot receive text messages from my friends with iPhones. Can somebody please tell me where to go to turn off the "Find your phone" feature and what ever else I need to turn off to accomplish this objective? Thank you.
Isotope Joe

Find My iPhone has nothing to do with receiving or not receiving text messages.
What you should have done is turn off iMessage prior to handing over the device.
Deactivating iMessage

X1 DVR and Sony A/V Receiver no signal to TV

Similar Messages

Maybe you are looking for