X11 Yellow-Cursor Problem: Still Not Solved
Sorry for bringing this up again, but previous discussions (search for "X11 yellow cursor") are not active anymore, and the problem is unsolved. Let me briefly restate it for those who just joined in:
When displaying X11 windows from Linux machines on Intel Macs using Apple's X-server, the cursor turns into a hardly visible yellow something. Apparently, the cause is related to some wrong assumption about the Endianness.
There used to be a patch available (http://www.macosxhints.com/article.php?story=20060316124704289), but it was superseded by Apple's latest X11 update. The alternative solution suggested in that article (fiddling with the icon set on the Linux side) seems not work reliably - it doesn't for me.
So the present situation is very unsatisfactory. I just bought iMacs for my research group and myself. Having tested all the software we need for our daily work (which includes X11) on my Powerbook G4, I thought I would be on the safe side. Now, we've run into this Intel-specific bug, which annoyingly enough seems to be understood and solved, but Apple decided not to correct it in its latest X11 release.
I would highly appreciate any suggestions how to work around the problem for the time being. And I hope that somebody at Apple is reading this: The usefulness of Macs in a Linux/Unix-dominated scientific-computing environment critically depends on the availability of a reliable, stable X11 implementation.
Hans
iMac 24", PowerBook G4 Mac OS X (10.4.9)
Hi Hans,
but it was superseded by Apple's latest X11 update.
What do you mean by "superseded"? The patch
http://homepage.mac.com/lycestra/yellowcursor.patch
works well with the latest Apple's X11 source code.
Just download X11-0.46.4.tar.gz from
http://www.opensource.apple.com/darwinsource/10.4.9.x86/
and put it in the same directory as yellowcursor.patch
Then you can apply the patch as follows:
$ tar zxvf X11-0.46.4.tar.gz
$ cd X11-0.46.4
$ patch -p1 < ../yellowcursor.patch
Now you can build everything by
$ cd xc
$ make World >& logfile
I guess it will take 20 to 30 minutes.
(build may be faster if you add some definitions into config/cf/host.def)
After the build, don't run "make install". Instead, just install the new Xquartz. Be sure to backup the origianl:
$ sudo mv /usr/X11R6/bin/Xquartz /usr/X11R6/bin/Xquartz.ORG
$ sudo cp -n programs/Xserver/Xquartz /usr/X11R6/bin/
You may compare the output of xdpyinfo and glxinfo before and after installing it. I have noticed any performance difference between the original and the new Xquartz.
PowerMacG4, PowerBookG4, iMac(C2D) Mac OS X (10.4.9)
Similar Messages
-
IPad Mini retina screen orientation problem still not solved?!
I have also been having the screen orientation problem on my iPad Mini retina. I cannot find out what the problem is or how to solve it. The switch does not help it and neither does changing the settings. Nor does rebooting. Also, the volume on the retina is definitely lower than the ordinal iPad Mini. If I had known this I would've kept the original. I am on IOS 7.1.2.
If you have Reset it, Restored it from Backup and Restored it as new and none of these helped then you will need to get it serviced.
-
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
-
In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.
Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps. -
Regrettably Shane mu Q/problem is not solved-how does one check the comptability of defn (1020x...) for the computer and Bracia?
Don't know, I do know the TV has a higher refresh rate, check out SwitchResX online for more control options over HDMI.
-
When i open my itunes of recent edition 12.0, i am getting error as "itunes.exe has been set to run in compatabiltity mode " Though i reinstalled it several times from last days ,the problem is not solved. Please provide the solution asap.
Try iTunes for Windows: How to turn off Compatibility Mode.
tt2 -
TS1389 the above steps are still not solving the problem
Following the steps recommended in http://support.apple.com/kb/TS1389 does not solves the problem.
Did someone had the same problem and was able to solve this ?sudo rm -rf /Volumes/Elements/.Trashes/$UID/*
this excatly how i kept the commands guess i didn't know those were two seperate commands,,all my office works were inside the folder name Documents in Mac Os disk... now its not there the games are still there and all other applications ,, just the desktop items and document folder is dissappared and it no longer visible,,, not even in my backup....
after i dragged an item from trash can the display was like
MacBook-Air:~ mac$ sudo rm -rf /Volumes/Elements/.Trashes/$UID/*/Volumes/Elements/.Trashes/502/broucher\ copy.psd
After this the document were deleted ,,, is there anyway i could recover that file it means a lot,, if you could help,,,all.. this happened because the trash can is empty but as i join the drive there are the files in trash that i deleted from external drive as a result no matter how much i delete the external drive shows no increase in space available..pelase suggest.. i even tried trash it didn work.... -
Hey guys ! After the update if ios6.0.1 ! My wifi still did not solve! It does not connect when it in lock screen mode. It will auto connect back after I unlock my screen! Anyone have the same problem with me? Any solution to contact apple or a solution for me? Thanks!
This is the way iOS is designed to work.
There is no issue.
Wi-Fi turns off in sleep mode to save battery life. Wi-Fi will stay on in sleep mode if the device is plugged into external power. -
So far my problem is not solved
so far my problem is not solved
The number connects ok and it rings ? If it's not being answered then try contacting support via this page and explain and see how they reply : https://ssl.apple.com/emea/support/itunes/contact.html - account security is normally dealt with over the phone as they need to confirm your id and that it's your account, which is more easily done over a phone line.
-
Still not solve reading a file problem
members here i s a bug which is not yet solved as per my littele knowledge it doesnot read the documents content and prints it on command line any input from is most apprciated
her is code
import java.io.*;
class read
public static void main(String args[]) throws IOException
String line;
String[] full=new String[10];
int count=0;
FileInputStream fis=new FileInputStream("sampledocument.doc");
DataInputStream input= new DataInputStream("fis");
while((line= input.readLine())!=null)
System.out.println("line");
count++;
full[count]=line;
error given is
javac read.java
read.java:11: cannot find symbol
symbol :construtor DataInputStream(java.lang.String)
location:class java.io.DataInputStream
DataInputStream input = new DataInputStream("fis");
Note :read.java uses or overrides a deprecated API.
Note :Recompile with -Xlint:deprecation for details.
1 error.but still by removing quotes i am not getting out put here is modified code
import java.io.*;
class read
public static void main(String args[]) throws IOException
String line;
String[] full=new String[10];
int count=0;
FileInputStream fis=new FileInputStream("sampledocument.txt");
DataInputStream input= new DataInputStream(fis);
while((line= input.readLine())!=null)
System.out.println("line");
count++;
full[count]=line;
it creates out put on single line as "line " where as in original text i have written i mean to say in text file
when going gets tough ,ough gets going. -
Hello Friends,
I am using 6 tables in my report.i want to display recores by AT NEW and Related stuff.
Can i use following code for query and internal tables ?
or Sujjest me Better code.
to use loop within loop is not good idea.
I want to disply Records
total Document type wise ->year wise -> Month wise -> Sales Order Number wise->Item Numberwise -> Production order numberwise
This is interactive report of 8-9 screens !!
Main problem is to make AT new with different loop !!
Sujjest me with code !!
Points will be rewarded soon !!
Regards,
Nimesh Master
TABLE DECLARATION ************************
TABLES : VBAK,AFPO,AUFM,MAKT,KNA1,VBAP.
INTERNAL TABLE DECLARATION *******************
DATA : BEGIN OF T1 OCCURS 0,
AUART TYPE VBAK-AUART,
NETWR TYPE VBAK-NETWR,
KUNNR TYPE VBAK-KUNNR,
VBELN TYPE VBAK-VBELN,
AUDAT TYPE VBAK-AUDAT,
END OF T1.
DATA : BEGIN OF T2 OCCURS 0,
NETWR TYPE VBAP-NETWR,
POSNR TYPE VBAP-POSNR,
END OF T2.
DATA : BEGIN OF T3 OCCURS 0,
AUFNR TYPE AFPO-AUFNR,
KDPOS TYPE AFPO-KDPOS,
KDAUF TYPE AFPO-KDAUF,
PSMNG TYPE AFPO-PSMNG,
WEMNG TYPE AFPO-WEMNG,
END OF T3.
DATA : BEGIN OF T4 OCCURS 0,
DMBTR TYPE AUFM-DMBTR,
MATNR TYPE AUFM-MATNR,
ELIKZ TYPE AUFM-ELIKZ,
END OF T4.
DATA : BEGIN OF T5 OCCURS 0,
NAME1 TYPE KNA1-NAME1,
END OF T5.
DATA : BEGIN OF T6 OCCURS 0,
MAKTX TYPE MAKT-MAKTX,
END OF T6.
FREE T1.
SELECT VBELN NETWR AUART AUDAT KUNNR FROM VBAK INTO CORRESPONDING FIELDS
OF TABLE T1 WHERE AUART IN AUART AND VBELN IN VBELN.
FREE T2.
SELECT NETWR POSNR FROM VBAP INTO CORRESPONDING FIELDS OF TABLE T2
FOR ALL ENTRIES IN T1 WHERE VBELN = T1-VBELN .
FREE T3.
SELECT AUFNR PSMNG WEMNG KDPOS FROM AFPO INTO CORRESPONDING FIELDS OF
TABLE T3 FOR ALL ENTRIES IN T1 WHERE KDAUF = T1-VBELN .
FREE T4.
SELECT DMBTR MATNR ELIKZ FROM AUFM INTO CORRESPONDING FIELDS OF
TABLE T4 FOR ALL ENTRIES IN T3 WHERE AUFNR = T3-AUFNR.
FREE T6.
SELECT MAKTX FROM MAKT INTO CORRESPONDING FIELDS OF TABLE T6 WHERE
MATNR = T4-MATNR.
FREE T5.
SELECT NAME1 FROM KNA1 INTO CORRESPONDING FIELDS OF TABLE T5 WHERE
KUNNR = T1-KUNNR.
LOOP AT T1.
AT NEW VBELN.
WRITE : / T1-VBELN .
ENDAT.
AT NEW AUFNR.
WRITE : / T1-AUFNR.
ENDAT.
AT END OF AUFNR.
SUM.
IF T1-PSMNG = T1-WEMNG.
T1-CLOSE_ORD1 = T1-CLOSE_ORD1 + T1-DMBTR.
ELSE.
T1-OPEN_ORD1 = T1-OPEN_ORD1 + T1-DMBTR.
ENDIF.
TOT_DMBTR_C = TOT_DMBTR_C + T1-CLOSE_ORD1.
TOT_DMBTR_O = TOT_DMBTR_O + T1-OPEN_ORD1 .
ENDAT.
AT END OF VBELN.
SUM.
P = TOT_DMBTR_C.
Q = TOT_DMBTR_O.
TMP_OC_SALES = NET_PRICE - P.
TMP_PER_SALES = ( TMP_OC_SALES * 100 ) / NET_PRICE .
TMP_TOT_MAT = P + Q.
TMP_PER_MAT = ( TMP_TOT_MAT * 100 ) / NET_PRICE.
TOT_NET_SALES_A = TOT_NET_SALES_A + NET_PRICE.
TOT_P_A = TOT_P_A + P.
TOT_Q_A = TOT_Q_A + Q.
ENDIF.
FORMAT COLOR 2 ON.
WRITE : 20 NET_PRICE,
50 P,
65 Q,
83 TMP_OC_SALES,
100 TMP_PER_SALES,'%',
120 TMP_TOT_MAT ,
139 TMP_PER_MAT,'%'.
FORMAT COLOR 2 OFF.
ENDAT.
ENDLOOP.
1. Tell me is it appropriate to take same number of INTERNAL TABLE as DDIC
TABLE ??
2. Wat should be the queries for them ?
3. How i use AT NEW with Different Loop for Internal tables ??i am gving u the silmilar kind of code where i used 4-5 tables.
1> used for all entries tat will increase the performance
2> use read instead of at
3> use work area
REPORT ZBH_FI_ALV1 No Standard Page Heading.
TABLES:T001,SKA1,SKB1,BKPF,BSEG.
TYPE-POOLS:slis.
TYPES DECLARTIONS
TYPES:begin of str_bkpf,
blart type blart,
bukrs type bukrs,
belnr type bseg-belnr,
gjahr type gjahr,
budat type budat,
end of str_bkpf.
TYPES: begin of str_bseg,
belnr type belnr_d,
gjahr type gjahr,
buzei type buzei,
bschl type bschl,
hkont type hkont,
bukrs type bukrs,
blart type blart,
budat type bkpf-budat,
saknr type saknr,
fstag type fstag,
ktopl type ktopl,
bilkt type bilkt,
end of str_bseg.
TYPES:begin of str_t001,
bukrs type bukrs,
ktopl type ktopl,
end of str_t001.
TYPES:begin of str_ska1,
bilkt type bilkt,
ktopl type ktopl,
saknr type saknr,
end of str_ska1.
TYPES:begin of str_skb1,
fstag type fstag,
bukrs type bukrs,
saknr type saknr,
end of str_skb1.
DATA DECLARATIONS
DATA:it_bkpf type standard table of str_bkpf ,
it_bseg type standard table of str_bseg ,
it_t001 type standard table of str_t001 ,
it_ska1 type standard table of str_ska1 ,
it_skb1 type standard table of str_skb1 ,
fieldcat type slis_t_fieldcat_alv WITH HEADER LINE,
events type slis_t_event WITH HEADER LINE,
layout type slis_layout_alv,
layout type slis_layout_alv1 ,
ALV type SY-REPID.
data:w_index type sy-tabix.
data: wa_bkpf like line of it_bkpf,
wa_bseg like line of it_bseg,
wa_t001 like line of it_t001,
wa_ska1 like line of it_ska1,
wa_skb1 like line of it_skb1.
INPUT VARIABLES
SELECT-OPTIONS:s_BUKRS FOR BKPF-BUKRS obligatory,
s_BLART FOR BKPF-BLART obligatory,
s_BUDAT FOR BKPF-BUDAT,
s_BSCHL FOR BSEG-BSCHL,
s_HKONT FOR BSEG-HKONT.
SELECT STATEMENTS
START-OF-SELECTION.
select blart "Document type
bukrs "Company Code
belnr "Accounting Document Number
gjahr "Fiscal Year
budat "Posting Date in the Document
from bkpf
into
table it_bkpf
where bukrs in s_bukrs
and blart in s_blart
and budat in s_BUDAT.
check sy-subrc = 0.
if not it_bkpf[] is initial.
select belnr "Accounting Document Number
gjahr "Fiscal Year
buzei "Number of Line Item Within Accounting Document
bschl "Posting Key
hkont "General Ledger Account
bukrs "Company Code
from bseg
into table it_bseg
for all entries in it_bkpf
where belnr = it_bkpf-belnr
and gjahr = it_bkpf-gjahr
and bukrs = it_bkpf-bukrs.
endif.
if not s_BSCHL[] is initial.
delete it_bseg where not bschl in s_bschl.
endif.
if not s_HKONT[] is initial.
delete it_bseg where not hkont in s_hkont.
endif.
if it_bseg[] is not initial.
sort it_bseg by bukrs gjahr belnr.
refresh it_t001.
SELECT bukrs "Company Code
ktopl "Chart of Accounts
from T001
into table it_t001
where bukrs in s_bukrs.
if not it_t001[] is initial.
sort it_t001 by bukrs.
refresh it_ska1.
SELECT bilkt "Group Account Number
ktopl "Chart of Accounts
saknr "G/L account number
from SKA1
into table it_ska1
for all entries in it_t001
where ktopl = it_t001-ktopl.
if not it_ska1[] is initial.
sort it_ska1.
refresh it_skb1.
SELECT fstag "Field status group
bukrs "Company code
saknr "G/L account number
from skb1
into table it_skb1
for all entries in it_ska1
where bukrs in s_bukrs and
SAKNR = it_ska1-saknr.
endif.
endif.
endif.
loop at it_bseg into wa_bseg.
w_index = sy-tabix.
read table it_bkpf into wa_bkpf with key BUKRS = wa_bseg-bukrs.
if sy-subrc = 0.
wa_bseg-blart = wa_bkpf-blart.
Read Table it_t001 into wa_t001 with key bukrs = wa_bseg-bukrs.
if sy-subrc = 0.
wa_bseg-ktopl = wa_t001-ktopl.
if sy-subrc = 0.
Read table it_ska1 into wa_ska1 with key ktopl = wa_bseg-ktopl.
wa_bseg-saknr = wa_ska1-saknr.
wa_bseg-bilkt = wa_ska1-bilkt.
if sy-subrc = 0.
Read Table it_skb1 into wa_skb1 with key bukrs = wa_bseg-bukrs saknr = wa_bseg-hkont.
wa_bseg-fstag = wa_skb1-fstag.
modify it_bseg from wa_bseg index w_index transporting ktopl bilkt saknr fstag blart.
endif.
endif.
endif.
endif.
endloop.
regards
bhanu
all the best -
I was using my mac as normal and then my resultion on mr screen changed which i have fixed using the normal methods but i still continue on getting a horizontal line whereever my cursor is even after i have restarted and shut down. The line is a white colour but my other screens seem dulled wherever this line is not following it is not a solid white. It looks like its in a diagnostic mode or somthing. Any help would be appriciated, thanks.
It is possible there is a problem with the computer's graphics, but try a simple fix. viz. reset the NVRAM / PRAM.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Report a bug, if this problem is not solved, p2p of rtmfp will not be of much use
Recently, we have several clients on a p2p application, but we use the development version to test, two-way voice and video connection is not successful, several customers of the network environment is as follows:
First of all, there is no firewall;
These networks have in common is:
After an optical access, the subnet with a lot of routers, one by one, and some series, some parallel, some in series and then parallel, and some in parallel then in series, in short, they can be online, and then not the same segment of the computer, p2p connection is not successful, and other computer connection is not successful, and some also use the vpn.
Analogy: 192.168.5.10 and 192.168.10.10 to connect not, 192.168.5.10 and 192.168.5.11 is ok, is 192.168.5.10 may be outside the network of other computers can connect to, but 192.168.10.10 possible and other computers outside the network connections are not.
Hope you solve this problem as soon as possible, because rtmfp too expensive, otherwise p2p applications, are generally large companies (schools, government) affordable, and their networks are very complex, they do not take, you will no client .
My English is not very good, google translation
I gave you a bug report so long, how did not care for me ah;
This forum nobody, or you did not test this bug, you do not have time to correct this bug;
Either we modify not the flash player platform to the bottom of things, I will not give you advice.
In fact, standing on a technical point of view to think that I have is to use a socket network communication can be OK, network barrier, it is not.
But would like the user's perspective, I can be normal to the Internet, other p2p communications software, I can, on this thing, impossible, it is this software not work, so that this bug is that we must solve the .
I am very concerned about this issue every day and came to see nobody replies, I think this problem, I think, to solve this problem, you can proceed in two ways:
1.dns
I think it may be able to solve this problem, dynamic dns,
The idea is: to allow users to connect to the server, the user computer first upd listener (that is, iis services), then farid + domain to form a secondary domain name server dynamically to resolve the domain name to the user's computer, in a timely manner to refresh dns.
In this way, the user's computer, there is a fixed identity.
2 gateway
From users within the LAN to solve this problem, it can only proceed from the gateway.
For example, to use arp and other means to get to the router, where each segment ip then ip, similar to the route command to specify more than one gateway to the user's computer may be able to solve this problem.
In theory, these two methods may be feasible.
We also expect a new solution, I do not know Daoxing not
Speak before this program, take a look at our test for RTMFP p2p network topology, and the test results (explain, test, do not open the firewall and router are not set up static routing).
Computer A, computer B - "router A -" server S
The above NetConnection.Connect.Success 95% NetStream.Connect.Success 5% NetStream.Connect.Fail
Computer A - "Router A - servers S" - routers B - Computer B
Above, NetConnection.Connect.Success, NetStream.Connect.Success
Computer A - "Router A - servers S" - router B - routers C - Computer B
Above, NetConnection.Connect.Success, 50% NetStream.Connect.Success 50% NetStream.Connect.Fail
(Computer A - Router A, computer B) - router B - server S
Above NetConnection.Connect.Success, 100% NetStream.Connect.Fail
Computer A - "Router A -" router B - server S "- Router C" - router D "- computer B
Above NetConnection.Connect.Success, 100% NetStream.Connect.Fail
Computer A - "Router A -" Router B - "Router C -" server S "- Router D" - Router E "- computer B
Above NetConnection.Connect.Success, 100% NetStream.Connect.Fail
See the above test results, is not very bad, the key is FMS4.5 sell 450,000 RMB in China, their own software does not do a good job, but also to sell such a high price in China, a man named QQ. The above test environment, all 100% NetConnection.Connect.Success 100% NetStream.Connect.Success, free, QQ has more than 100 million users, QQ companies rely on advertising to make money game.
Seems to digress, huh, huh.
The test results, 100% NetConnection.Connect.Success, and NetStream.Connect.Fail the main reason is because the route connected in series or more than two or two and then caused.
From a technical perspective, as a packet travels through a number of the NAT router default all packets can be out, new packets can not be into the second layer of the router caused.
Find the reason, we think of a countermeasure to solve this problem from the software itself.
The last case of the above test environment, for example:
When computer A and server S NetConnection.Connect.Success computer B with the server the S NetConnection.Connect.Success, computer A to Router D sends an upd packets, not because the router can only broadcast the data packet to computer B, so 100 % NetStream.Connect.Fail.
The 100% NetConnection.Connect.Success, if we can NetStream.Connect, and NetConnection.Connect connected together, is not can be 100% NetStream.Connect.Success?
In other words, no matter what circumstances, computer A and computer B can and server S connection is successful, the other way round, that is, the server S and the Computer A or Computer B can connect.
We can not let the computer A or computer B, pretending to server S (In theory, called NAT, technically speaking, is to modify the source ip of the packet header and source Mac server S, and parity), the router not in the NAT, and other communications.Hi Mr. Wog,
My guess is that once you see an estimate for replacement for hundreds of dollars, those scratches won't look too bad anymore. There are products to cover the outer casing, and some people put stickers on, or even paint (I don't recommend either, but ymmv). Good luck. -
Problem still not resolved since November 2011 and...
Getting a bit boring now having to come back here and complain because BT cannot get me a reliable connection, it's really getting me down and I so wished I remained with Plusnet who gave a much better service.
I just had an online chat with a BT tech via the Chat Applet and he has now told me that my line is in a stabilisation period for yet another ten days and there has been some migration done for which he could not answer why but did mention adsl2 and that I will get much better speeds.
I have done the speed test via BT Speed Tester and here are my results:
Best Effort Test: -provides background information.
Download Speed
1.09 Mbps
0 Kbps 2 Mbps
Max Achievable Speed
Download speedachieved during the test was - 1.09 Mbps
For your connection, the acceptable range of speeds is 800 Kbps-2 Mbps.
IP Profile for your line is - 1.25 Mbps
2. Upstream Test: -provides background information.
Upload Speed
703 Kbps
0 Kbps 832 Kbps
Max Achievable Speed
Upload speed achieved during the test was - 703Kbps
Additional Information:
Upstream Rate IP profile on your line is - 832 Kbps
If only I could utilise that upload speed then maybe I would have a chance, the upload speed has doubled but yet my Snailband download speed has hit a poor 1.9mbps.
I just checked samknows and it mentions nothing about the exchange being done, my ip profile is a shocking 1.25mbps!
http://www.samknows.com/broadband/exchange/SWLJ
The tech guy from BT asked if we had changed our package even though he confirmed we are on option 3 with unlimited broadband, what is going on here?
The last time I had BT a few years ago I could not say nothing bad of them, practically faultless and more than satisfying speeds, now all I get is a speed that decreases daily to a point of what is the point if you get my drift?
Yes I have checked the usual and changed filters, plugged in to master socket, changed ethernet leads blah blah blah, the wireless is switched off via the router and below are the router stats:
Line state:
Connected
Connection time:
0 days, 01:25:45
Downstream:
1.805 Mbps
Upstream:
899.9 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.3 Annex A
Latency type:
Fast
Noise margin (Down/Up):
13.0 dB / 5.7 dB
Line attenuation (Down/Up):
59.1 dB / 36.4 dB
Output power (Down/Up):
16.5 dBm / 12.5 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
17 / 139
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
22 / 124
Error Seconds (Local/Remote):
12 / 65
and no I have not switched off the router or downloaded a million viruses to slow my system performance. Please don't ask about the connection time being on for about an hour or so, we have not switched it off at all.
can one of you mods have a look please as this is getting to the point of 5 months of hassle and yet I still pay the bills for this shoddy service."with your attenuation the upgrade will mean little if anything in speed increase see here"
This is my problem, I was promised by the BT sales of at least 2mbps, all I got was 1.44mbps and an exciting 2mbps for a few hours before going back to 1.44mbps. Now I have a very slow 1.09mbps download which has dropped from 1.44 and my upload speed has more than doubled from 0.300mbps to 0.720mbps.
It was harder enough before with 1.44 to use lovefilm, netflix, xbox live, youtube, bbci player and so on, now all I get is constant buffering for a simple 10mb youtube vid that is not even HD and churning it out on 240 rate.
2012 and here we are back in the caveman times....it's the exact same line and number as it was with Plusnet who offered a much better service and yes I know BT owns them zzzz this service sucks to no end!
I wish I could say that im jolly but how I am feeling is far from it and we are paying £48 per month for this service including the odd quid or two for calls as I have the anytime call package. £5.99 per month for xbox live and another £4.99 for Love Film Instant streaming...We don't live in some trendy place earning megabucks mate, we have 4 kids and an average of 20k per year salary combined, we don't need this **bleep** ripping us off and not even bothering to at least half the bill until it's sorted.
I really hope Virgin Media come down my way soon because BT SUCKS! -
After I got updated to iOS 8 on iPhone 5c purchased 3 months back, after I tapped on wifi symbol in notification tab, first there will be a signal on top left corner but when I open safari it showed " there is no network or wifi" with message of "cellular data turned off ". Again I have to open settings and turned off and on wifi to get the signal and connected to network. There is no problem with my wifi signal or network but I don't use cellular data at all. Kindly look into the issue and provide me with a solution. Thank you apple and Tim cook. Rip Steve Jobs.
I have an iPhone 5C.
iOS 8.0 disabled my Wi-Fi. Actually not just disabled, it made my phone behave as it did not have W-Fi. I could not re-enable wi-fi.
Restarting my phone or resetting network settings made me no difference.
Solution:
Power down iPhone for a few minutes
Power-up and Wi-Fi is back again!
After updating to the latest iOS 8.0.2 it disabled my Wi-Fi again. Following the power-down procedure above fixed it.
-Ed
Maybe you are looking for
-
When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?
-
Acrobat 8 Pro - Toolbar Problem
Hi, 2 days ago I bought a new Dell T5400 precision workstation. I am using XP Pro SP3. No anti-virus software yet. After installing everything (Office, Quark, PageMaker, CS3) I launched Acrobat and all seemed well until I used the cropping tool. At
-
Cluster of control references: want to access the control value
I want to be able to save and set control values that are saved (XML). I have my controls on about 5 sub vi's. So I thought it'd be a good idea to put all the control references in a cluster from the several sub vi's and save and read from one point.
-
Which non apple modem/router work with airport extreme
Hi My old modem needs replacing. It currently feeds into my airport extreme and an airport express extends the network to my office in the garage. Ideally I want an 'n' speed modem/router and use the airport extreme to extend the network in the garag
-
How to remove archive log files from ASM managed 11g R2 database?
Hi, I am planning to automate deletion of older archive log files from my 11g R2 Production instance which is ASM managed. Also want to remove the archive log files files from standby database. Please provide your inputs on how can I remove the older