X11vnc gives weird errors

Hi,
I've been trying to get x11vnc working on my other box but if I start it I get weird errors, and I can't find anything on google about this, as many other things are causing these kinds of errors, while no results turn up if I add x11vnc to the search parameters...
Here's the output:
[medja@myhost ~]$ x11vnc -rfbauth -display :0
14/02/2008 16:50:06 passing arg to libvncserver: -rfbauth
14/02/2008 16:50:06 x11vnc version: 0.9.4 lastmod: 2007-12-21
14/02/2008 16:50:06 Using X display :0
14/02/2008 16:50:06
14/02/2008 16:50:06 ------------------ USEFUL INFORMATION ------------------
14/02/2008 16:50:07 X DAMAGE available on display, using it for polling hints.
14/02/2008 16:50:07 To disable this behavior use: '-noxdamage'
14/02/2008 16:50:07
14/02/2008 16:50:07 Wireframing: -wireframe mode is in effect for window moves.
14/02/2008 16:50:07 If this yields undesired behavior (poor response, painting
14/02/2008 16:50:07 errors, etc) it may be disabled:
14/02/2008 16:50:07 - use '-nowf' to disable wireframing completely.
14/02/2008 16:50:07 - use '-nowcr' to disable the Copy Rectangle after the
14/02/2008 16:50:07 moved window is released in the new position.
14/02/2008 16:50:07 Also see the -help entry for tuning parameters.
14/02/2008 16:50:07 You can press 3 Alt_L's (Left "Alt" key) in a row to
14/02/2008 16:50:07 repaint the screen, also see the -fixscreen option for
14/02/2008 16:50:07 periodic repaints.
14/02/2008 16:50:07
14/02/2008 16:50:07 XFIXES available on display, resetting cursor mode
14/02/2008 16:50:07 to: '-cursor most'.
14/02/2008 16:50:07 to disable this behavior use: '-cursor arrow'
14/02/2008 16:50:07 or '-noxfixes'.
14/02/2008 16:50:07 using XFIXES for cursor drawing.
14/02/2008 16:50:07 GrabServer control via XTEST.
14/02/2008 16:50:07
14/02/2008 16:50:07 Scroll Detection: -scrollcopyrect mode is in effect to
14/02/2008 16:50:07 use RECORD extension to try to detect scrolling windows
14/02/2008 16:50:07 (induced by either user keystroke or mouse input).
14/02/2008 16:50:07 If this yields undesired behavior (poor response, painting
14/02/2008 16:50:07 errors, etc) it may be disabled via: '-noscr'
14/02/2008 16:50:07 Also see the -help entry for tuning parameters.
14/02/2008 16:50:07 You can press 3 Alt_L's (Left "Alt" key) in a row to
14/02/2008 16:50:07 repaint the screen, also see the -fixscreen option for
14/02/2008 16:50:07 periodic repaints.
14/02/2008 16:50:07
14/02/2008 16:50:07 XKEYBOARD: number of keysyms per keycode 6 is greater
14/02/2008 16:50:07 than 4 and 91 keysyms are mapped above 4.
14/02/2008 16:50:07 Automatically switching to -xkb mode.
14/02/2008 16:50:07 If this makes the key mapping worse you can
14/02/2008 16:50:07 disable it with the "-noxkb" option.
14/02/2008 16:50:07 Also, remember "-remap DEAD" for accenting characters.
14/02/2008 16:50:07 X FBPM extension not supported.
14/02/2008 16:50:07 X display is capable of DPMS.
14/02/2008 16:50:07 --------------------------------------------------------
14/02/2008 16:50:07
14/02/2008 16:50:07 Default visual ID: 0x21
14/02/2008 16:50:07 Read initial data from X display into framebuffer.
14/02/2008 16:50:07 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/9856
14/02/2008 16:50:07 *** unrecognized option(s) ***
14/02/2008 16:50:07 [1] 20
14/02/2008 16:50:07 For a list of options run: x11vnc -opts
14/02/2008 16:50:07 or for the full help: x11vnc -help
14/02/2008 16:50:07
14/02/2008 16:50:07 Here is a list of removed or obsolete options:
14/02/2008 16:50:07
14/02/2008 16:50:07 removed: -hints, -nohints
14/02/2008 16:50:07 removed: -cursorposall
14/02/2008 16:50:07 removed: -nofilexfer, now the default.
14/02/2008 16:50:07
14/02/2008 16:50:07 renamed: -old_copytile, use -onetile
14/02/2008 16:50:07 renamed: -mouse, use -cursor
14/02/2008 16:50:07 renamed: -mouseX, use -cursor X
14/02/2008 16:50:07 renamed: -X, use -cursor X
14/02/2008 16:50:07 renamed: -nomouse, use -nocursor
14/02/2008 16:50:07 renamed: -old_pointer, use -pointer_mode 1
X Error of failed request: BadShmSeg (invalid shared segment parameter)
Major opcode of failed request: 148 (MIT-SHM)
Minor opcode of failed request: 2 (X_ShmDetach)
Segment id in failed request: 0x0
Serial number of failed request: 35
Current serial number in output stream: 39
[medja@myhost ~]$
vncserver (for virtual screens :1 and such) is working well btw and there is no firewall installed on that box. It's a twinview setup if that matters. I have no idea what's wrong...
Any idea?

To run x11vnc from ssh session you either have to "su" to root or run x11vnc from local console.
AFAIK shared memory access from different virtual terminal is disabled by default so you have to have root priviliges to access it.
Sorry this bit of necromancy, but i've searched the net about this problem and could't find any specific pointers so now hopefully google will find this solution

Similar Messages

Can't open Sharing pref pane. Gives weird error.

Suddenly I can't open my Sharing preference pane. It gives the following error:
"You cannot open Sharing preferences because it doesn't work on an Intel-based Mac."
I haven't run any utilities that remove language packs or architectures. I tried to re-install the 10.5.6 combo update but it says that the updater can't be applied.
Anyone know how to fix this?

Okay, I managed to get the combo updater to install. Don't know why it didn't work before. Then I repaired my permissions.
The Sharing pref pane now opens but it's non-functional (buttons don't respond to mouse clicks) and there are display errors like incorrect or missing text.
I also tried restoring the Sharing pref pane from my Time Machine backup but that didn't make a difference.
So, I think you're right. I need to do a archive and install. What a pain in the *ss that is going to be.

Weird error from iMovie 9.0.2 - Quartz Extreme required - what gives?

I got this weird error message from iMovie 9.0.2 today ...
"Quartz Extreme required.
iMovie requires a graphics card that is compatible with Quartz Extreme. One or more of your graphics cards does not support Quartz Extreme.
[Quit]"
What is going on here? I have an Intel i5 Quad Core iMac with 16GB of RAM and 1.5TB free on my drive. The graphics card in this iMac has 1GB of VRAM (ATI Radeon HD 5750) so I thought it could handle pretty much anything I throw at it.
I had a movie of my daughter's school play (about 1.5 hours) which I edited in iMovie today and then selected the Menu to finalize the Project.
SInce it was taking a few hours, I left the machine to run and do its thing.
When I got back, I found that iMovie had shut down and I had the above error message on my screen.
I bought this machine so that I could do some amateur video editing ... and this is my first attempt. Not happy with this result!
Any advice/suggestions/guidance on what is going on here?
Thanks

CH,
Not I do not have a colition to this, but it has not happened to me in a while.
Good Luck with this and hope someone chimes in to help you.

Weird Error!!cant figure it out

Good day ppl! i posted in the Vga section of this forum but noone seems to reply with a clear cut answer..someone said memtest and it reported no errors??pls read my post and give me a diagnosis!! ure help is very much appreciated!
i have a slight problem which i cant seem to find a solution to...
whenever i run games like Counterstrike 1.6 and Warcraft FT, a few mins in the game, i get a weird error which closes the application...the error is as follows:
Microsoft Visual C++ Runtime Library
Runtime Error !
Program D:\Valve\hl.exe
abnormal program termination
once this error shows, i have to click the OK button as nothin else can be clicked.on clicking another error appears....
CiceroUIWndFrame: hl.exe -Application Error
The instruction at "0x10232929" referenced memory at "0x10528688".The memory could not be read.
Click ok to terminate program..
I have to click ok and this terminates my game...becos of this problem i reinstalled my windows XP pro SP1 again and then reinstall my MSI gfx latest drivers again, then also reinstalled the games again.but it still keeps coming..PLS HELP ME!!!
any solution ppl...u all are geniuses as i have come to see and very helpful
MSI 875p Neo Fisr Bios 1.6
512 DDR 400 Twinmos Rams
MSI GF4 FX5600 VTD 128
i dont know but is this a problem with my vga card and if so how can it be solved..
ive run adware, spyware, antivirus, tuneup utilities 2003 to check for any possible errors or virus or worms or trojans but it all comes empty..i have pc-cillin 2003 also and ran a scandisk with no reported viruses..
my power supply is the Vantec ION 400 Wtt powersupply SATA ready..
3.3V 26A
5V 40A
12 16A
i have Twinmoss Pc3200 DDR 400 512 MB ram(single stick)--- no memory issue as of sort as i have more than 70% of it free whenver running windows and programs in the background...
i have 5 cooling fans including a Vantec Tornada( 3 intake and 2 exhaust) with 2 HDD( 80gb and 40gb barrcudas)
i hope this info will be good enuf for u ppl to diagnos my problem
again i thank u all for ure time

Agreed; Since the FX-5800 and up GPU's Require up to 7 Amps from the +12V Rail, then Yes 16 Amps is Very Light indeed , Dont Forget your P4 CPU under Stress (Gaming) Can require up to 10-11 Amps, combine that with the 7 Amps that your GPU May Require, and you are Over your +12V Rails Power capabilities...You should have at Least 20Amps on your +12V Rail, and because you are a Gamer! You should Have one of the Better PSU's Available that have 30 Amps + available on the +12V Rails. ie Enermax 465W or Antec 480W..............Sean REILLY875

Ccashut gives an error

I'm trying to load data from SQL Server to Oracle. When I try to deploy my mapping, default agent gives an error and says restart agent. Ok, I go to Linux and say "ccashut", give pwd and get this:
[oracle@xware unix]$ sh ccashut
Checking admin port: 23791
Enter password:
Error: Could not connect to the remote server. Please check if the server is down or the client is using invalid host, ORMI port or password to connect: Disconnected
Exiting due to error.
That "remote server" is very weird, it's on the same server? How can I fix this, this is now a show stopper because I can't deploy my mappings. I have the Linux server in my clients hosts-file, I know pwd is right and now I don't know anymore what to do...
Thanks in advance,
Mari

I'm trying to deploy a mapping but can't do it because OWB says that CCA must be restarted (and that's done using ccashut ans ccastart, according to owb manual). Default agent location must be registered before I can deploy a mapping and that registration fails with "restart" error.
Connection failed. CCA-1536: Control Center Agent is unavailable, please restart. Details are: Error reading application-client descriptor: Error communicating with server: Connection refused: connect; nested exception is: javax.naming.Communication.Exception: Conenction refused: connect [Root exception is java.net.Connect.Exception: Connect refused: connect] ormi://xware:23791/jrt
BR,
Mari
Edited by: 860361 on 23.5.2011 0:47

Help Weird Error Messages Connecting Externals on USB

Hi,
For some reason very recently everytime I plug in a peripheral into the usb port I get a weird error message and the units (like an external HD, external DVD burner, etc.) won't work. The errors are something like:
The system extensions/system/library/extensions/systems/kext plugins/libkern.kext was installed improperly and can not be used. Please reinstall ir or contact the products vendor for an update.
Ohter error with the have the same message but file components change like:
iousbfamily.kext
bsdkernel.kext
mach.kext
udf.kext
system.kext
unsupported.kext
Anybody have a clue? Thanks

Yes, you should absolutely report it as a bug.
But this is a problem in error reporting, not in valid code compilation, because the code
cannot compile -- so don't expect to impart much momentum on a fix without additional community support.
There's very clearly a coding problem that the static function f cannot access the non-static member
g.
To estimate the risk of more serious problems with the compiler, I investigated the two closest scenarios for making the code legal. If you either:
make g a static member (and give it storage), or
make f a non-static function (and call it with an instance of A)
...then the code is valid and the compiler doesn't ICE in either case.
So the severity of this problem is very low because, as you said, this ICE seems to occur only when there is an error in the code.

Weird error without any error message

I've been working on some actionscript 3 system. And all of a
sudden, it wouldn't execute anymore. When I pushed CTRL-Enter in
Flash CS3, a white screen would open up (instead of the normal
flash program) and no trace-output would be given.
Three hours later I found the cause of this weird problem.
It's (simplified) the line:
var value:Number = -(true ? 1 : 0); // This one doesn't work.
Put this line in your script, and your entire program won't
execute. And without any error message! I was wondering, why is
that? By the way, the following lines do work:
var a:Number = -(2*3+4); // Gives -10.
var b:Number = (true ? 1 : 0); // Gives 1.
var c:Number = -b; // Gives -1.
var d:Number = 0-(true ? 1 : 0); // Gives -1.
var e:Number = -((true ? 1 : -1) as Number);
So, my guess is that the code (true ? 1 : 0) gives some sort
of data type which is not a Number, and therefore doesn't except
minus signs. But that wouldn't explain why it doesn't even give an
error. So what IS wrong with it?

ok - well if these numbers are used to begin the execution of
a method in your file, it's likely that they are not firing up
because the syntax here is incorrect. in order to use this type of
conditional operator (which i do use quite often as well, handy
convenient ;) the structure should be:
var value:Number = (condition) ? 1 : 0;
'true' is not a 'condition' but a boolean result, so it
should not be evaluated in the way have been using it here -
however 'true' is 'true' so the result will always be 1 (the first
expression in the operator) - i'm not certain why you would need a
-0 result and if you are always wanting a 'negative' number then
use that number in the return expression, as in:
var value:Number = (condition) ? -1 : 0;

Weird Error When Verifying External HDDs

Hello
I'm getting a weird error when verifying my 2 external HDDs. Both give me an "invalid leaf record count" error. But only when I check them with the OSX install cd. If I check them in my user account, they come up OK. Both drives also gave me a "reserved fields in the catalog record have incorrect data" error. Disk Utility was able to fix that error, but not the invalid leaf error. I have tried multiple repairs, but DU says the volume cannot be repaired. The other weird thing is when I ran the first repair, it said 1 HFS Volume Repaired and 1 Volume could not be repaired. I have also tried using Disk Warrior, but it gives a "this volume appears to be formatted with a newer version of the OS" error.
Both these drives I had plugged into my mom's iMac (running 10.5--my eMac is running 10.3.9) because I had firewire problems back in June. Did 10.5 modify something that has 10.3 mixed up?
Is there something I can do to fix this or do I need to do another re-install?
Music Luver
"+I hear her playing music+..." ~ Barry Manilow

OS X 10.5 does add additional attributes bits to the file descriptors, so using the drive under 10.5 would be expected to add those additional bits to at least the disk directory plus any modified files.
When you then check the drives using utilities created prior to OS X 10.5, those older utilities don't understand the additional bits and report then as errors (DU), of the utilities check first and refuse to run if the disk is tagged as from a latter OS version (DW).
There's a generic warning about mixing older utilities with newer OS versions in Only use Mac OS X 10.4-compatible disk utilities with Mac OS X 10.4 volumes.
I'd be ready to shrug the error reports off as spurious; however, that DU "corrected" the reserved bits suggests the drive directories will be rewritten again should you again move the drives to a 10.5 computer. Are you seeing any actual problems wiuth reading or writing to the external drives? If not, write it off to 10.5 settings bits that earlier versions ignore; it shouldn't affect your data.

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." I am obviously connected to the internet since you are reading this.
I tried upgrading permissions but it did not help!? Can anyone tell me what is wrong? Thanks

Try
Reboot the computer, see if that fixes it.
Then try:
Backup your files off the computer (not TimeMachine) and disconnect
Hold c boot off the 10.6 disk and simply reinstalling OS X
Log in and update to 10.6.8
c boot off the 10.6 disk again and use Disk Utility >Repair Disk
reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

Photoshop gives "Program Error" when I try to open files while VPN

I think this may be a new one. While VPN on my company network, Photoshop CS cannot open any files. Either drag and drop, double click or even file open command. You get the clock and the message "failed to open because of a Program Error.... " or something close to that. I'm sure it says Program Error though. Works fine if I'm not VPN but soon as I'm on it stops opening files or even creating a new blank canvas gives that error. I checked Adobe forum and nothing there to find about this one. Anyone else have this happen?

Hi, SSI.
1. What VPN client are you using?
As a guess, your VPN client may be blocking a port that PS CS may use for license verification over the Internet. The fact that it works AOK when not using the VPN would tend to support this hypothesis. As to what port it may be attempting to use, I can't say, but you may be able to find this out from Adobe and then work with your firm's networking staff to see if this port can be opened for use when the VPN is active.
2. You noted that you "checked Adobe forum and nothing there to find about this one." Did you post to the Adobe Photoshop forum? If not, I recommend doing so.
3. You wrote: "You get the clock and the message "failed to open because of a Program Error.... " or something close to that. I'm sure it says Program Error though."As FYI, in cases such as this, copying down the exact text of the message is helpful.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

When i try to log on to Oracle it gives an error TNS:no listener, WHY?

hi guys,
WHen i try to log on to the Oracle 8i server using the user: SYSTEM and password: manager, it gives an error
ERROR:
ORA-12541: TNS: no listener
why this occurs and how do i fix the problem? please give me step by step instructions TY :)
Message was edited by:
user502781

ORA-12541 ...
- The client is requesting connection to a service.
- The service is derived from the alias used in the connection. For example, @orcl ... orcl = alias.
- The alias is used to look up the host, listener port and service in the tnsnames.ora
The listener is on the same machine as the database. The listener must be up and listening on the port the client want to use.
If the listener is not up, there wil be an "ORA-12541: TNS: no listener" error;
If the listener is listening on the wrong port, there wil be an "ORA-12541: TNS: no listener" error;
If the client is asking for the wrong port, there wil be an "ORA-12541: TNS: no listener" error.
To start the listener in Windows, go to the Control Panel > Administration Tools > Services and ensure the Ora?????Listener is started.
To verify the listener is up, open a command box, and type 'lsnrctl status'
To see what the client is expecting, on the client machine open a command box, and type 'tnsping {alias}' where you replace {alias} with the alias to be used in the connection.

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008

I have a an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes. All of the other movies on the card download with out a problem.

I have an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes.
All of the other movies on the card download with out a problem. The movie in question is not 'corrupt' as you can watch it in iMovie direct from the SD card but as soon as you try to import it, it just says 'error'. iIve tried moving the file to an external drive ( and other variations on this theme) then importing but have had no luck.
Can anyone please help me.

The mystery remains....
Thanks for the pointers. The file type is .mts (a proprietry sony one).
I have now found some video converter software (Wondershare and iSkysoft) at a cost. Either will convert this file for me into .mp4. This I can then import into iMovie without any problems. I've checked this on the trial versions and it worked well but without paying am left with a giant watermark in the video
The mystery (which I still havent solved) is why did 20 other .mts files import fine and then this one not?
If you could point me in the direction of some free .mts converter software that would be the cherry on the cake.
Thanks

X11vnc gives weird errors

Similar Messages

Maybe you are looking for