XI- Xi Scenario XI Adapter (Port Issue)

Hi all
 we are implementating File - XIA--|Internet|--
XIB -File.
At XIA i am using XI Adapter(receiver)
 Message protocal HTTPS
At XIB I am using XI Adapter(sender)
 Messaage protocal HTTP
Now the issue is
 XIA is using HTTPS protocal , that means it will post data
to port 443 ( HTTPS Port)
 But at XIB message protocal is HTTP.
So which port at XIB we need to open HTTP port or HTTPS port
Note: Both XI are at different landscape.
receiver : XIA communication channel to post data to XIB.
sender : XIB communication channel to receive data from XIA
we had gone through these blogs before posting this query..
Re: XI -> XI scenario
Re: XI to XI connectivity
connection XI to XI
Re: XI to XI connectivity
/people/abhy.thomas/blog/2007/01/18/xi-content-certification-in-a-b2b-scenario--case-study
/people/alwin.vandeput2/blog/2006/06/07/d-xie-soap-part-4-xi-software-component-architecture-for-point-to-point-scenarios
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii
Regards,
Ashutosh

hi,
have a look at this guide:
How To Configure Message Level Security in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2e7020d-0d01-0010-269c-a98d3fb5d16c
is shows how to connect two XIs (one is "small XI" PCK)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Similar Messages

Mini Display Port to VGA Adapter Having Issues with My Samsung 40" HDTV

So I ordered the brand new 15" i7 Macbook Pro along with the Apple wireless magic mouse and wireless keyboard after having bought my HDTV (went on a bit of a spree) with the intention of using the TV as a monitor for couch surfing. But, upon hooking up the adapter to the TV, my macbook's screen flickered between that blue transitionary screen and it's desktop screen. It did this for a few minutes. I jiggled the cable thinking that there was a loose connection somewhere as that was the problem with my previous mini DVI to VGA adapter from Apple. I did a little research and it turns out that they released a firmware update in 2009 for such a problem. I downloaded the update and attempted to install it but it did not determine that there was even an adapter connected. So, I proceeded to call Apple, they man was very calming to talk to and make all of my problems seem to melt away, but there were no solutions reached. He thought that maybe my TV either had a problem or was incompatible with the adapter (incompatible with a VGA connection? can you get any more analoge that that?). So, here I am, the adapter seems not to have a problem with regular monitors but I am still experiencing intermittent disconnects from my TV. I still, superstitiously jiggle the connection whenever I have dropouts but that really doesn't seem to be the issue here (or at least I hope not because that could mean port issues with my new laptop). Any suggestions? I noticed, after changing some settings on my TV, in an attempt to remedy this, that the TV was displaying the picture funny, I turned the TV off and then on again and it fixed the problem. That being said, perhaps I just need to turn my TV completely off when I'm not using it, as I have been just letting it go into standby. Maybe it needs a restart every so often much like my computer. I don't currently have data to support that theory as I just recently tried turning it off, but, since then have not had dropouts.

You may have the screen refresh rate set higher than the TV is generally able to track reliably. It may be able to get there most times, but occasionally loses sync because it is out of its nominal range.
I suggest you sit down with the manual for the TV and find out what resolutions at what refresh rates it intends to support through VGA, and make sure your screen settings are near (or below) those limits.

Any known 'porting' issues between 8.2.2 and 9.0 ??

Hi all,
we are in the process of evaluating LS ES2 (9.0) and would like to know if there are any 'porting' issues between the two versions. Asked another way, are there any issues in deploying a 8.2.2. LCA onto 9.0 ?
Dan

8.2 LCA's will run fine in 9.0 if they are just deployed into it. But in 9.0 a new application model has been introduced, so in order to make changes to anything after you've migrated it you'll need to create an application and migrate your processes and resources into it. You may want to take a look at the Leveraging Legacy Solution document available online. Here's the link: http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=leveragingLegacy. html .
Chris

PI 7.1 adapter module issue

I deoplyed my module and worked fine. now i changed some code by adding parameter to module
strModuleKey = moduleContext.getContextData("module.key");
I changed the related things in my communication channel(gave parameters)
Now, i get below error while executing...
java.lang.ClassCastException: class com.sap.aii.af.sdk.xi.mo.MessageContext:library:com.sap.aii.af.sdk.libcom.sap.engine.boot.loader.ResourceMultiParentClassLoader428c6e04alive incompatible with interface com.sap.engine.interfaces.messaging.api.Message:interface:com.sap.aii.af.ms.ifccom.sap.engine.boot.loader.ResourceMultiParentClassLoader2dd7e4d6alive
Followed the below url but in vain..
PI JAVA ADAPTER MODULE PROBLEM
Incompatible with interface - Exception in Adapter Module
Issue on developing Adapter Module
Also if you are using PI 7.1 refer to the blog:
/people/stefan.grube/blog/2008/12/11/adjust-your-pi-70-adapter-modules-for-pi-71-in-15-minutes
Please let me know if u have any other suggestions other than this...
Thanks
Prabhakar

Hi Venkat,
Yes, you cannot add custom modules to soap adapter.
Please refer below documentation for the same..!!
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/8c4756224a6fb5e10000000a155369/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/EN/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
Regards,
Swetha.

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

Sounds like you may have been in extended display mode. If so, all you had to do was drag a window to the projector display. Or, if you wanted mirrored mode, in display preferences select check mirror display.

Replacing the MacBook Pro Power Adapter Port

There's a short in the adapter port. I have to keep the cord sitting just perfectly to make sure it's running off the adapter or off the battery. The battery has needed to be replaced for a while so when the adapter shorts and it switches to battery power it will shut down before I notice.
Any idea on how expensive it is to replace this adapter? I've never had anything on the inside of my macbook repaired. I bought this 4 years ago so I'm hoping it's not the end.
Thanks.

Some people on the forum have used the Pros for their MacBooks and had no problems.
Carbon Copy Cloner

AC Adapter port question.

Hello, all.
I have a wonderful iBook G4 which I love very much. A couple of weeks ago, it was charging on the table when a commotion happened, and the AC adapter got ripped out of the adapter port. The ibook will no longer take a charge, as there is apparently a good deal of damage to the actual AC adapter port.
I'm wondering if anyone can tell me, is the AC adapter port integrated into the motherboard? I'm taking it in for repairs at CompUSA. They want $169 to fix it, plus parts. If the adapter port is integrated into the motherboard, that will necessitate replacing the entire motherboard, which would be very costly. If it is a stand alone piece, I would feel much better.
Unfortunately, CompUSA will not tell me this until I give them 170 bucks. I would like to know beforehand what I'm looking at.
Any help?

Hi Zack,
No, the DC-In-Board is not a part of the main logic board. It's a fairly inexpensive part. Around $50 or so.
John

Power adapter port frying power adapter?

sequences of events:
1) travel with madsonline power adapter, months ago when plugged in, cord is yanked, bent the met ring around the male part of the adapter, pried it back to a sort of circular shape, fits back in adapter port and with proper placement charges machine
2) after months of using original apple adapter at home, always detected and charges, and the madsonline on the road, with some proper setting into the adapter port will charge, when on the road the machine stopped detecting the power adapter
3) bought new apple brand power adapter, plugged into port, circle is green but machine did not detect the adapter, no charge
4) went to local apple sales and repair place (not an apple store) and while there, using another adapter, machine detects and charges (the tech at store heard some sort of short or electrical event when connecting), then I used my new adapter and worked, recall slight short/shock noise, the old madsonline did not show anything.
5) came home, new adapter plugged in, ring goes orange, goes to full charge, remove the adapter and there is a noise like a short, pluge it back in and the adapter ring has no light, machince does not detect adapter.
Q1) Could it be that the damange to the adapter port killed the madsonline and now killed my new apple adapter?
Q2) Since it appeared an adapter we used at the store also made that electrical noise, may replace the 3 day old apple adapter with a new one but if it just shorts another one I guess it is the DC-in adapter port. Anyone guess that this behavior means a replacement for the adapter port?
Sorry for the long story, looking for some feedback or confirmation if anyone has had this type of behavior.
thanks
Craig

update to story, day 2
1) went to store where bought the adapter, they tried it on a display model and it worked fine so assumed my port on my machine was bad
2) get home, power down the machine, plug in the adapter and it works, and is working, charging. I still heard some type of pop when connecting it to the machine so something must not be totally correct.
3) saw the DT&T service as an option, was going to ship it but will determine if there is a way for me to connect and unconnect the power without losing the ability to charge (i.e. always when powered down?)
I have reset the PMU.
Any suggestions for attaining more reliable power connection or if anyone has this behavior?
thanks
Craig
iBook Mac OS X (10.4.3)

Airport Extreme Skype works, but not mail or Safari? Port issue?

So I have a weird issue with my AE.
Often the internet will just go away...Safari will not work, iChat will not work and mail will not work. Today when it happened I noticed Skype was still logged in and working. I hadn't noticed this previously since I just this week installed Skype. When I am having an issue with my MacBookPro the MacBook in the house also has the same issue so it can't be my computer.
I also don't think its comcast because of the whole Skype working fine thing. Also when I "borrow" someone elses wifi connection everything works...mail works, Safari, etc...
So it must be something with my Airport Extreme. The only thing I can think of is some port issue. The AE has the lastest firmware from a month ago or so...
This tends to happen about once a week for a few hours and then it suddenly gets better for no apparent reason. The AE is in a cabinet in the entertainment center so it gets a bit warm in there sometimes but this morning it was pretty cool in the house and it still did it so I don't think its heat related...
Any other thoughts?

naw i'm back in the states now so it's pretty much no longer an issue. thanks though! If you know anything about mirror agent and logout issues you could look at my other question in using mac OSX Tiger called "mirror agent & failed logout -- HELP!"
thanks!!

ALE IDOC to XML IDOC scenario using XML port

Hi,
I am working on ALE IDOC to XML IDOC scenario using XML port . The requirement is to place a XML IDOC on the application server using ALE IDOC scenario ( output type is created in NACE which is ALE enabled ).
Can anybody help me on the steps.
Regards
Kumar
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Sep 8, 2011 6:01 PM

U can give a try as follows.
In the Partner Profile of Sender R/3 system,
Give the Receiver Party P_Party in the PartnerNo. Give the 'Business Partner' as logical System type.
In XI, Party Definition of P_Party
Give the following Alternative Identifier
Agency -   Sender R/3 Business System
Scheme -   ALE#GP
Value    -    P_Party

Is 10.9.4 having USB port issues?

Is 10.9.4 having USB port issues? I'm noticing copying files to USB ports on my Mac Pro (the front two anyway) seems to be like molasses and give me the pinwheel of death.
Anyone?

Try resetting SMC.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".

MSI Gaming 5 USB ports issue

Hello everyone,
I apologize if I posted this in the wrong section, so as the title says it, sorta of a huge USB ports issue just happened after installing the motherboard / windows / all drivers, even restarted a few times
then tested the processor and video card.
Everything ok to that point, I left the pc opened for 3 hours, shut it down, the next day..I couldn't type the windows password.
Alright restart, that maybe one of those kinks that goes away on it's own I guess..Switched each device in different ports..nothing, tried only one device..still nothing.
Tried only usb2.0 ports then 3.0 port > a a little panic kicked in :D
So, in my bios I was seeing 2 keyboards 2 mice..ok...got a bios update from msi site..latest one..flash ..reboot..still nothing.
Strange part was..they were working just fine in bios and everything prior to windows loading, even after that mouse was showing power ( led was ok )but no functionality.
Safe mode didn't help..the miracle of last known good config saved the day.
BUT after choosing the option..ok it started working....randomly..I was typing the windows pass...and right in the middle ...it stopped again..mouse was working...tried again..stopped at 75% of the password.
Tried again...it worked > Reinstalled every driver.. seems stable for now, though being day 2 of this whole deal.
So if anyone honors me with enough time to read the story and maybe relate I would glady appreciate it.
Guys if anyone had any usb related incidents with any of the Z97Gaming boards please share
If I missed anything, please ask.
Thank you

Hello everyone,
Sorry for the delay in all of this and thank you for the input.
Specs are below, and this is something currently in the process of being upgraded.
I7 4790k / MSI Gaming 5 / Sirtec 500W / 8 gb ram Corsair Vengeance / AMD sapphire 7970 GHZ / one single HDD 1 GB
The Windows installation went fine on 2 other colleagues from work.
For the moment stable, I removed and reinstalled all USB related drivers.
It was a weird one though..

Charging port issues

So I see almost everyone that has the Incredible 2 has had a charging port issue. I love it how one Verizon store told me it was a known issue and another store said it wasn't. It seems like it is well known and Verizon nor HTC wants to own up to it. Everyone that has this issue should not have to pay the $99 out of warranty fee for a refurbish phone. I got to wait a month to get my upgrade. The only way my phone charges is through my laptop usb cord which is weird but not my wall charger. To be honest, I might have to switch to a different brand or maybe even go to a different carrier.

Well, when you see how many people are on here writing the same issue and a Verizon rep replying to trying to take care of it, its going to be a known issue. Even called HTC to see how much to fix through them. The gentleman has had calls in the past and recently about people complaining about the same issue. I know Verizon stores don't fix these issues in the store, but I expect better from a smartphone. All of my phones in the past never had this issue.
Regarding the service, Verizon still has the best in my area.
When you work retail, you should help a customer try to fix there issue by at least mentioning someone who can fix it.
Not just trying to sell another product. That isn't good customer service.

IPhone 5c Orange EE PORTING ISSUES/SMS Problems

Hi,
I upgraded from Orange to EE a year ago and opted to keep my original phone number.
The day I had the phone I restored all my settings from the cloud. Everything worked fine apart from SMS messaging to non-iPhones.
I found out that I only had the email selected on the send and receive section of the settings, at the time my was greyed out and I could not select it, this has now disappeared completely!
I rung EE customer services and we went through EVERYTHING to try and fix this phone so I could send SMS messages. They told me it was a porting issue and it would be resolved in a week or so, but a year on, I'm still brother getting my SMS service.
Also although iMessage works, it still says waiting to connect in both message and face time settings.
I've tried everything with this phone and not even EE could solve it.
What's going on?

Hello
Welcome to the EE Community! Wow, you're a patient one! Waiting a whole year is a very long time - I'd definitely advise you contact the team again to get this put on the radar again. Here's how to get in touch with the EE Customer Service team:
If you're on Twitter, you can tweet them @EE, however If you'd prefer to talk to someone, you can dial:
150 from your EE mobile phone
If you're ringing from another phone, it's 01707 315000
For handy text codes & more, check out this page: http://ee.co.uk/help/get-in-touch Cheers,
Titanium
Was my post helpful? Please take 2 seconds to hit the 'Kudos' button below

SOAP RECEIVER SCENARIO PORT ISSUE

Hi gurus,
we are testing a proxy to soap synchron scenario and cannot get response from receiver. We have a firewall issue and need to open required ports.
Which ports should we open? 50000? 80?
Kind Regards,
PM

Hi Peter,
SOAP communication uses HTTP protocol, so messages are transferred over 80 or 443 port by default, depending on whether you use HTTP or HTTPS communication, correspondingly.
Hope this helps,
Greg

XI- Xi Scenario XI Adapter (Port Issue)

Similar Messages

Maybe you are looking for