XMII 12.0: Unable to write file...

Hi all,
lately we are facing some problems using xMII. One point is that you can easily move file or folder inside the xMII 12.0 workbench because there is no confirmation popup when clicking on a folder and move it by chance.
Apparently I have moved a folder, and it seems that I produced a Catalog Server Error according to the log. Now xMII seems to be confused, because we are now getting lots of error of the kind "Unable to wirte file..." like this:
Unable to write file D:\usr\sap\MES\JC00\j2ee\cluster\server0\apps\sap.com\XMIIEnterpriseApplication\servlet_jsp\XMII\root\CM/Development/USER/xml/treestructure.xml
Have you already encountered such an error? Is it because of the "/" and "\" signs that are mixed inside the URL? Or could it be the Catalog Error mentioned above?
Thanks for a hint!
Best regards
Michael

Jeremy,
we are using xMII in combination with Adobe Flex. So xMII is going to talk to the database, and Flex as the presentation layer is calling xMII transactions to get the data.
The HTML wrapper that Flex creates and the SWF-Files are stored in the CM folder of xMII so that we can include it in the xMII Portal using the navigation wizard of xMII.
In xMII we have set up a sandbox project, so the file structure in xMII is "xMII-Root\Sandbox\Data" (Catalog) and "xMII-Root\Sandbox\WEB\Data" (Web).
When using the xMII workbench we are importing the SWF-Files into "xMII-Root\Sandbox\WEB\Data". In Flex-Builder we have set up an ant-file that deploys the SWF-Files directly into the "xMII-Root\CM\Sandbox\Data" folder after changing them. However, when only using the ant file, the copied files are gone the next day, when the WebAS restores the contents, I guess.
Using the ant files of course is much easier than using the import feature of the workbench. Maybe you can recommend a better way of deploying?
Best Regards
Michael

Similar Messages

Error Log entry Unable to write file with XML Saver

Hi all,
I have just encountered the following problem. I am saving a XML file using the XML Saver. Another BLT reads the file, changes something, and saves it again with the same name.
The file is saved, but the NetWeaver SAP Log gives the error
"Unable to write file /usr/sap/<SID>/JC00/j2ee/cluster/server0/apps/sap.com/xappsxmiiear/servlet_jsp/XMII/root/CM/<folder>/file.xml"
Is it a problem with the new storage mechanism in MII 12? Even if I delete the file first and then save it again with the same name, the error is displayed (though the file is saved).
Michael

Hi Mike,
no, the Debug only says "Begin Action XML Saver" and "End Action XML Saver".
The action however writes the file, the contents has changed after the BLT has run.
Well, I have just tried the Text Saver with the same file (name and contents). It also gives the error. I now wanted to delete the folder. The folder disappered from the workbench view, and the Netweaver log says "Unable to process service message".
I then clicked "publish" on the parent folder and tried to create the folder again, but although the folder was not displayed, the workbench said "the folder already exists". When I start my BLT, it could write the file into the folder which then reappeared in the workbench.
Hm, maybe our installation has some problems? Feels like missing authorizations...
Michael

Unable to write files in different m/c in LAN using utl_file package

I need to dump some files generated by utl_file package in a separate m/c not in the db server.For that I tried using utl_file_dir='*' and mapped the specified directory in the db server. but its failing as show below..
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 449
ORA-29283: invalid file operation
ORA-06512: at "ANIRBAN.WRITE_IN_FILE", line 9
ORA-06512: at line 1
The prototype sp is given below..
CREATE OR REPLACE PROCEDURE write_in_file(pInDir IN VARCHAR2,
pInFileName IN VARCHAR2,
pInFileContent IN VARCHAR2) IS
vFile UTL_FILE.FILE_TYPE;
vFileName VARCHAR2(20) := pInFileName;
BEGIN
dbms_output.enable(1000000);
vFile := UTL_FILE.FOPEN(pInDir, vFileName, 'w', 32000);
UTL_FILE.PUT_LINE(vFile, pInFileContent);
UTL_FILE.FCLOSE(vFile);
END write_in_file;
With this sp i'm able to write in genuine drives but not in mapped one.What shall be done to be able to write in a separate m/c freely.Plz guide me

And make sure you specify the full path name of the server/directory path rather than using substituted drive names as is can sometimes be funny about that sort of thing.

Administrators unable to write to a text file created by another Administrator on Windows Server 2008.

Why are Administrators unable to write to a text file created by another Administrator on Windows Server 2008?
--- The Administrators already have full control so how do I fix this? ---
Example: On a Windows Server 2008 (SP1): user A (who belongs to the Administrators group) logs in and creates a directory C:\foo and creates a file readme.txt in the foo directory. User B (also a member of the Administrators group) logs in and opens C:\foo\readme.txt in notepad. User B types something and tries to save the file. User B cannot save the file…an option to save as some other file name is presented. The security permissions of C:\foo\readme.txt show that Administrators have full control.
Work around 1: Explicitly add user B to have full control over the foo directory. The problem is that all the all other Administrators still need to be added (current and future).
Work around 2: Change the Users security permission to be full control on the foo directory. (this seems dangerous!)
It is interesting to not that this same procedure is not a problem in Windows Vista. (Any insight about the difference?)
Sincerely,
Ian

so there is no way to change this without literally shutting down the UAC?
I have files that I need to modify all the time, and it is very annoying to have to save as to my desktop modify and then copy and paste the file again.
I would also rather not give myself permissions to the entire C:\ Drive even specified Folders or documents, etc......
You can change these settings without bringing down the UAC

1.    Click Start, type gpedit.msc and press Enter.
2.    Expand Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options.

3.    Double-click “User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode” on the right pane.
a.    Choose “Elevate without prompting” and click OK.
b.    Double-Click “User Account Control: Admin Approval Mode for the Built-in Administrator account”, Click Enable, Apply and then OK
c.     Double-Click “User Account Control: Run all users, including administrators, as standard users”,Click Enable, Apply and then OK
Then reboot the Server. You should now have the ability to modify any document, etc....

File manager unable to write data on USB/mem card

After updated to Android 4.4, I am unable to write data on USB pendrive or on memory card( only inbuilt app - File commander can write data on memory card but not on USB pen drive).
With file commander, I can read SD card and Micro USB pen drive( which means I can copy data from SD card and Micro USB pen drive to phone memory).
But with File commander, I can write data on SD card( which means I can create folders and copy data to SD card) but not on Micro USB Pen drive.
If any body has solution to that write restriction on micro USB pen drive, please tell ????????
Upto Android 4.3 I can write on SD card and micro USB pen drive with any file manager app.
But with 4.4, I can write only on SD card with only In build file commander app, but not on micro USB pen drive.
Solved!
Go to Solution.

http://talk.sonymobile.com/t5/Xperia-Z-Ultra/What-changed-in-Android-4-4-KitKat-with-SD-cards/m-p/63...
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Unable to write data into excel file when it's close

Hi,
I'm facing this problem and it's a bit weird. I'm using the following method to insert data into excel file. But when excel file is close, it unable to write data into the excel sheet. But it was able to write the data into the excel sheet if i open the excel file when running the program.
Can anyone please tell me what's wrong to the code?
public int updateLog(String sheet, String no, String cpId, String CatId, String rbtCode, String rbt, String rbtName, String artistName, String price, String rbtFileName, String songId, String msg){
        int result = -1;
        try{
            SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss",Locale.ENGLISH);
            String actionDate = formatter.format(new Date());
            rbtName = rbtName.replaceAll("'", "''");
            artistName = artistName.replaceAll("'", "");
            String sql = "insert into [Sheet3$] (Code, CpID, CategoryID, RBTCode, RBT, RBTName, ArtistName, Price, RBTFileName, SongID, UploadStatus, FileUploadedDateTime) ";
            sql = sql + " values ('" + no + "', '" + cpId + "', '" + CatId + "', '" + rbtCode + "', '" + rbt + "', '" + rbtName + "', '" + artistName + "', '" + price + "', '" + rbtFileName + "', '" + songId + "', '" + msg + "', '" + actionDate + "')";
            System.out.println(sql);
            log.writeLog(sql);
            result = stmnt.executeUpdate(sql);
        } catch(Exception e){
            e.printStackTrace();
            log.printStackTrace(e);
        return result;
    public int openConnection(){
        int result = -1;
        try{
            Class.forName(dbDriver);
            c = DriverManager.getConnection(conStr + excelFilePath+";ReadOnly=0;");
            stmnt = c.createStatement();
        } catch(Exception e){
            e.printStackTrace();
            log.printStackTrace(e);
            return -1;
        return 1;
    }Thanks

HI,
i hv a doubt regarding reading / opening of a
password protected Excel file using jxl( java ) .
How to read / open a password protected Excel file
thro Java (jxl ) program .plz let me know some
example also .
Regards,
Ramesh P
845935822cross posting !! answered here
http://forum.java.sun.com/thread.jspa?threadID=710466&messageID=9507085#9507085

Have downloaded i Tunes 10.5.1.42 but get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??

Have downloaded i Tunes 10.5.1.42 but get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
Is a copy of the CFNetwork file available for download if mine is corrupted?
Thanks

get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Getting "Unable to write cache file" message in DW CS4

I was having some issues with a Javascript message, so looking for possible solutions, I came across “Deleting a Corrupted Cache File” in the Index to Dreamweaver FAQ located on this forum. I decided to give it a shot and carefully followed the instructions on my Windows XP, deleting the suggested cache file in my Configuration folder. That didn’t help make my Javascript message go away, though I did eventually find a work-around for that issue.
However, after deleting this cache file, I began to get the following message every time I close my program or change sites in local files, “Unable to write cache file ‘C:\Documents and Settings\...” the message ends with the site name and the extension .dws. If I go to Manage Sites and turn off the Enable Cache button for that particular site, I no longer get the message. But if I turn the Enable Cache Button back on, I get the message again. It gives this same message for all the sites.
I’m hoping others have had this issue and there is a simple fix. I can’t say for sure that deleting the cache file in the configuration folder caused this, but it was only after that I began noticing the problem, so it would make sense the two are likely related.
Also, I wonder how important the cache is. I could just turn off the Enable Cache Button for all the sites as a work-around if there's no quick fix and if it’s no big deal.
-Steve

I was having some issues with a Javascript message, so looking for possible solutions, I came across “Deleting a Corrupted Cache File” in the Index to Dreamweaver FAQ located on this forum. I decided to give it a shot and carefully followed the instructions on my Windows XP, deleting the suggested cache file in my Configuration folder. That didn’t help make my Javascript message go away, though I did eventually find a work-around for that issue.
However, after deleting this cache file, I began to get the following message every time I close my program or change sites in local files, “Unable to write cache file ‘C:\Documents and Settings\...” the message ends with the site name and the extension .dws. If I go to Manage Sites and turn off the Enable Cache button for that particular site, I no longer get the message. But if I turn the Enable Cache Button back on, I get the message again. It gives this same message for all the sites.
I’m hoping others have had this issue and there is a simple fix. I can’t say for sure that deleting the cache file in the configuration folder caused this, but it was only after that I began noticing the problem, so it would make sense the two are likely related.
Also, I wonder how important the cache is. I could just turn off the Enable Cache Button for all the sites as a work-around if there's no quick fix and if it’s no big deal.
First of all, only delete cache files when DW is shutdown.
Also, there are a few different caches. That article only addresses 1 of them. Take a look at this TechNote to be able to find the Site .dws cache files:
http://kb2.adobe.com/cps/598/5989f7f4.html
HTH,
Randy

Error in LSMW Unable to write to file 'C:\ZSIGCO_CP_ZSIG

Hello,
In the Step 9 'READ DATA' I get the Error: 'Unable to write to file 'C:\ZSIGCO_CP_ZSIGCO_CP_ZSIGCO_CP.lsmw.read'
I do not know what the Problem is and how should I solve this Problem.?
Can any body help me sort out this Issue..?
Regards,
Deepak.

Thats right the file specification should look like this :-
ZXX - XX - ZXX Test
Files
Legacy Data          On the PC (Frontend)
Legacy Data          On the R/3 server (application server)
--   Imported Data        File for Imported Data (Application Server)
Imported Data                  ZXX_XX_ZXX.lsmw.read
--   Converted Data       File for Converted Data (Application Server)
Converted Data                 ZXX_XX_ZXX.lsmw.conv<<<----
destination file where to write
Wildcard Value       Value for Wildcard '*' in File Name
Reagrds
Dhirendra

Why am I getting this error message: Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk s

I am getting this error message, just starting today: Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox. I have tried several solutions (cleaning out my inbox, compacting folders, rebooting, checking through the webmail side), all to no avail, Can anyone help?

which os do you have?

ORA-27072: File I/O error, OSD-04008: WriteFile() failure, unable to write

Hi,
Im using oracle 10.2.0.1 on the Windows server 2003,
Every day at 03:30AM my database goes down, with following entry in the alert log.
=======================================================================================
Errors in file f:\oracle\product\10.2.0\admin\orclint\bdump\orclint_lgwr_7708.trc:
ORA-00345: redo log write error block 21111 count 12
ORA-00312: online log 1 thread 1: 'F:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCLINT\REDO01.LOG'
ORA-27072: File I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Thu Nov 24 03:36:46 2011
Errors in file f:\oracle\product\10.2.0\admin\orclint\bdump\orclint_lgwr_7708.trc:
ORA-00340: IO error processing online log 1 of thread 1
ORA-00345: redo log write error block 21111 count 12
ORA-00312: online log 1 thread 1: 'F:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCLINT\REDO01.LOG'
ORA-27072: File I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Thu Nov 24 03:36:46 2011
LGWR: terminating instance due to error 340
Thu Nov 24 03:36:46 2011
Errors in file f:\oracle\product\10.2.0\admin\orclint\bdump\orclint_pmon_8236.trc:
ORA-00340: IO error processing online log of thread
=================================================================================
We have raised the SR with ORACLE, after uploading the trace & alert log, reply from oracle as follows:
Generic Note
I couldn't find any issue in the trace file.
I think you need to open a ticket to the O/S vendor to identify which process is locking the file.
====================================================================================
We have move the database from F: to G:, problem got resolved, but we cant keep the database in G: for more time as the space issue, We have to move the database back to F: , and we are facing the issue on F:
can any body help, how to monitor the windows process locking the database files,
or the utility that can log the errors at the same time when database goes down.
Thanks,

Hello,
You can have a look to the windows Event Viewer, see if something happens around 03:30.
Do you have an antivirus on your server ?
At what time does your backup run ?
Regards,
Sylvie

WebUtil dll download error: Unable to write to local file

Hi,
Hopefully I'm putting this in the correct forums.
I'm setting up a Forms application that uses webutils.
We're running Forms and Reports standalone (10.1.2.3.0) running on Solaris Sparc (64bit) and have just applied patch 7703734.
As per Oracle Support doc [ID 783937.1], I'm trying to set the download location for the webutil libraries:
install.syslib.location.client.0 = C:\webutil
However, I'm gettting the following error message in the Java 6u16 console (repeated for each of the 3 webutil files)
*2011-Feb-07 12:24:16.988 ERROR>WUC-19 [URLDownload.pullFile()] Unable to write to local file C:\webutil\::dev\d2kwut60.dll. Failed to download URL http://appdev02:7787/forms/webutil/d2kwut60.dll*
I've done a bit of searching and most of the answer's I've come across refer to Vista or Windows 7 and UAC. Unfortunately the SOE for this app is XP Pro SP3.
It's probably something simple I'm missing , but would appreciate and pointing in the right direction.
If you need any more info, let me know.
Cheers,
Matt

Hello
the problem also appears with windows vista
i found a solution but it's not a good one
if you download the files into the java directory
you can modify the userrights and give the user "everyone" the right 'write' for the bin directory.

Sickbeard fails to start. "Unable to write PID file" [Solved]

I've installed sickbeard from the AUR but can't seem to get it started.
when running "sudo systemctl start sickbeard.service" I get the following output:
Job for sickbeard.service failed. See 'systemctl status sickbeard.service' and 'journalctl -xn' for details.
'systemctl status sickbeard.service' provides:
sickbeard.service - SickBeard daemon
   Loaded: loaded (/etc/systemd/system/sickbeard.service; disabled)
   Active: failed (Result: exit-code) since Sat 2013-02-23 14:49:19 CST; 1min 4s ago
   Process: 11518 ExecStart=/usr/bin/sickbeard --nolaunch --daemon --quiet --config $SB_CONF --datadir $SB_DATA --port $SB_PORT --pidfile=/run/sickbeard/sickbeard-8081.pid (code=exited, status=1/FAILURE)
Feb 23 14:49:18 arch systemd[1]: Starting SickBeard daemon...
Feb 23 14:49:19 arch sickbeard[11518]: Unable to write PID file: No such file or directory [2]
Feb 23 14:49:19 arch systemd[1]: sickbeard.service: control process exited, code=exited status=1
Feb 23 14:49:19 arch systemd[1]: Failed to start SickBeard daemon.
Feb 23 14:49:19 arch systemd[1]: Unit sickbeard.service entered failed state
And it looks like 'journalctl -xn' provides about the same info:
-- Logs begin at Tue 2013-01-08 17:25:44 CST, end at Sat 2013-02-23 14:53:29 CST. --
Feb 23 14:49:19 arch sickbeard[11518]: Unable to write PID file: No such file or directory [2]
Feb 23 14:49:19 arch systemd[1]: sickbeard.service: control process exited, code=exited status=1
Feb 23 14:49:19 arch systemd[1]: Failed to start SickBeard daemon.
-- Subject: Unit sickbeard.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Documentation: http://www.freedesktop.org/wiki/Softwar … e9d022f03d
-- Unit sickbeard.service has failed.
-- The result is failed.
Feb 23 14:49:19 arch systemd[1]: Unit sickbeard.service entered failed state
Also, here is the current systemd file for sickbeard, if that helps:
[Unit]
Description=SickBeard daemon
After=network.target
[Service]
EnvironmentFile=/etc/conf.d/sickbeard
User=sickbeard
Group=sickbeard
ExecStart=/usr/bin/sickbeard --nolaunch --daemon --quiet --config "$SB_CONF" --datadir "$SB_DATA" --port "$SB_PORT" --pidfile=/run/sickbeard/sickbeard-8081.pid
Type=forking
TimeoutStopSec=20
PIDFile=/run/sickbeard/sickbeard-8081.pid
[Install]
WantedBy=multi-user.target
So I guess obviously the important part is "Unable to write PID file: No such file or directory [2]", but I'm not really sure what that means or how to fix it. I've played around with the PIDfile configuration for the systemd service (tried renaming from sickbeard to sickbeard-8081) but I always get the same error.
Any ideas?
Edit: Solved by teekay
Last edited by spurious_access (2013-02-24 08:09:01)

The sabnzbd systemd unit file doesn't use a pidfile. Not sure why. It would make more sense there than it does for sickbeard, because IMHO sickbeard should run as the user who owns the target tv-series media folders. Using tmpfiles.d just causes a headache when you are going to update it using the AUR package.
I installed it once using sickbeard-git from AUR, changed the systemd unit file and /usr/lib/tmpfiles.d/sickbeard.conf to match my user, chown -R'ed /opt/sickbeard, ran "pacman -R --dbonly sickbeard-git", and ever since use "git pull" to update. That also works directly from web interface.
Last edited by teekay (2013-02-24 08:47:42)

A sporadic compile error vbc : error BC31019: Unable to write to output file 'D:\Revit\Dev32\RevitAdditions\Source\..\Intermediate\ReleaseWin32\VBNETSnippets\VBNETSnippets.dll': The specified image file did not contain a resource section.

Hi,
This is developer from Autodesk. We get this compile error from time to time. This is a sporadic failure. We can't find any issue in our own project.
vbc : error BC31019: Unable to write to output file 'D:\Revit\Dev32\RevitAdditions\Source\..\Intermediate\ReleaseWin32\VBNETSnippets\VBNETSnippets.dll': The specified image file did not contain a resource section.
I find a help doc from the website to try some steps to solve this issue.
Error ID: BC31019
To correct this error
Compile the program again to      see if the error recurs.
If the error continues, save      your work and restart Visual Studio.
If the error continues, restart      the computer.
If the error recurs, reinstall      Visual Basic.
If the error persists after      reinstallation, notify Microsoft Product Support Services.
My question is what the root cause for this issue. Could you please give us some explanation where the issue should be, VB compiler? .Net Framework?
Visual Studio? Operating system?
Thanks
Wilson

Hi hitzwx,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System, and Visual Studio Editor.
Based on your issue, I am not sure what the root cause for this issue. But I suggest you can try some suggestions so that narrow down this issue.
(1) I suggest you try to create a new simple VB project and then check this issue.
(2) In addition, maybe you see the document about your issue. If possible, I suggest you can try these suggestions to troubleshooting this issue.
https://msdn.microsoft.com/en-us/library/85s7w197.aspx
>>Unable to write to output file 'D:\Revit\Dev32\RevitAdditions\Source\..\Intermediate\ReleaseWin32\VBNETSnippets\VBNETSnippets.dll': The specified image file did not contain a resource section.
In addition, I suggest you can check if the specified image file in the output folder or you can try to click your image file in the Solution Explorer-> select the Copy to Output Directly properties->Copy always check this issue again.
If you have any update message about your issue, please tell me.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ORA-27044: unable to write the header block of file / IBM AIX RISC System/6

We are getting an error like this...
Oracle 11.2.0.2
AIX 5.3
Error:
CREATE CONTROLFILE REUSE DATABASE "CLMST" RESETLOGS NOARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/clmst02/UAT/oradata/control/control01.ctl'
ORA-27044: unable to write the header block of file
IBM AIX RISC System/6000 Error: 89: Invalid file system control data detected
Additional information: 3
Additional information: -1
Additional information: 1

ORA-09817 IBM AIX RISC System/6000 Error: 89
Oracle 11.2.0.2
AIX 5.3
Related Errors:-
Mon Nov 05 18:33:51 2012
ARC3 started with pid=30, OS id=954622
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC2: Becoming the heartbeat ARCH
Errors in file /clmst01/UAT/oracode/app/oracle/diag/rdbms/clmst/clmst/trace/clmst_ora_2514960.trc (incident=17053):
ORA-00600: internal error code, arguments: [kccugg_end], [], [], [], [], [], [], [], [], [], [], []
Errors in file /clmst01/UAT/oracode/app/oracle/diag/rdbms/clmst/clmst/trace/clmst_m000_2105586.trc:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/clmst02/UAT/oradata/redo/redo03A.log'
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
CREATE CONTROLFILE REUSE DATABASE "CLMST" RESETLOGS NOARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/clmst02/UAT/oradata/control/control01.ctl'
ORA-27044: unable to write the header block of file
IBM AIX RISC System/6000 Error: 89: Invalid file system control data detected
Additional information: 3
Additional information: -1
Additional information: 1
Cause:-
Your /clmst02/ mount point might be corrupted.
Check:-
fsck /clmst02
The current volume is: /dev/fslv00
File system is currently mounted.
Primary superblock is valid.
fsck: Performing read-only processing does not produce dependable results.
*** Phase 1 - Initial inode scan
*** Phase 2 - Process remaining directories
*** Phase 3 - Process remaining files
*** Phase 4 - Check inode allocation map
File system inode map is corrupt (NOT FIXED)
fsck: 0507-278 Cannot continue.
File system is currently mounted.
fsck: Performing read-only processing does not produce dependable results.
Fix:-
Either you can change the file location to another mount points or shutdown the database and run the fsck on /clmst02 mount point to fix the corrupted one & start the database.
Fix:-
Recreate the affected Redolog files
alter database add logfile group 3 (
'/clmst02/UAT/oradata/redo/redo03A.log',
'/clmst03/UAT/oradata2/redo/redo03B.log',
'/clmst04/UAT/oradata3/redo/redo03C.log') size 50m reuse;

XMII 12.0: Unable to write file...

Similar Messages

Maybe you are looking for