XMLForm Service message keep showing in the log file

Hello,
The message below keeps showing in the log file when the form is opening in Workspace ES. It keeps repeating like hundred times in the log file when the form is launching.
It just happen to some forms but not to all forms. I tried to see if there is any thing strange in the form but could not find any thing wrong in the form nor any explaination about this error on Adobe site or Internet. Note that I am still using LiveCycle ES 8.2.1 with SP3.
=============
[10/18/11 13:46:22:644 CDT] 0000003e XMLFormServic W com.adobe.service.ProcessResource$ManagerImpl log ALC-XTG-102-001: [1712] Bad value: 'designer__defaultHyphenation.para.hyphenation' of the 'use' attribute of 'hyphenation' element ''. Default will be used instead.
============
Can any one please advise.
Thanks in advance,
Han

Yes,
Upgrade it to SP1 with hot-fix. SUN has a very big bug in the 4.16 SP1 software . u have to apply that hot-fix otherwise you will in big bug in userpassword attribute and some other security issues.

Similar Messages

Messages not showing up in log files

I'm running a server program compiled with NetExpress 5.0 and Tuxedo 10gR3. The server program has several DISPLAY statements and those messages used to show up in the stdout file when running on previous version of Tuxedo but not anymore.
Is this a restriction in Tuxedo 10?

It looks a strange problem since in the Tuxedo library before service dispatching we can still see the output to stdout. But I also met same issue that DISPLAY in service can not print content to stdout. My netexpression is also 5.0. Which version you use before the Tuxedo migration?

File Error Message keeps popping up "the specified file is locked"

that is the message I get when I attempt to save or exit a project in fcp-- to my knowledge I have not done anything to lock a file or anything out of the ordinary--tnx in advance

It's nothing to do with whether you locked tracks in the Timeline.
Right click the project file and choose Get Info.
Do you see a check mark in the Locked section?
Example:

[svn] 869: Bug: BLZ-92 - catch IOException and log at the info level to keep from polluting the logs

Revision: 869
Author: [email protected]
Date: 2008-03-19 15:21:25 -0700 (Wed, 19 Mar 2008)
Log Message:
Bug: BLZ-92 - catch IOException and log at the info level to keep from polluting the logs
QA: Yes
Doc: No
Details:
Tomcat 5+ throws a ClientAbortException when it receives a TCP RST while writing a response to a client that has exited. This custom exception extends IOException, and we were only doing lighter INFO-level logging for SocketExceptions so the ClientAbortException was getting past this leading to ERROR level logging. This little tweak will mean less pollution of the server logs during QE load tests.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-92
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/endpoints/BaseHTTPEndpoint.ja va

Hi AbhijitRoy2005,
Other then climbing in the phone and calling the vendor, you could try:
1. To use a BufferedInputStream to wrap the SocketInputStream before you wrap that in the DataInputStream. So basically:
DataInputStream dis = new DataInputStream(new BufferedInputStream(socket.getInputStream());On one of my implementations this made a difference of a factor of 200+! So instead of processing 500 messages per second, I could process 10000 messages per second!
2. Or to take it to the next level and take a look at using NIO. That is New IO, available since Merlin (Java 1.4). But that would take you way more time then the first attempt.
The thing addressed by the possible solutions above is the blocking nature of the Stream based socket handling. Using a buffered input stream reads ahead. The NIO thing is all about non-blocking IO, which uses Channels and Buffers instead of Sockets and Streams (note that these are not equivalent!).
Of course, if you didn't change something in your own code, it might just very well be that the vendor just screwed up his ;)
Regards,
Frens

I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP

I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP

Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
iCloud: Locate your device

Hotsync Log does not show any information since August 2008. My Treo 755p has been syncing fine but nothing shows in the log!

I just noticed that when I am done syncing, the Hotsync Log does not have any information about the most recent operation. In fact the date of the last entry in the Log is August! Anyone know why this is happening and how to fix this?
Thanks.
Post relates to: Treo 755p (Verizon)

Now I know I've lost it--I'm replying to myself! Would you smart tech people please take a look at what I found and see if it means anything. Thanks!
Two more clues:
1) I was searching the Palm Knowledgebase and found out where the HotSync Log file is. When I open the file, using Explorer, this message pops up: 'To help protect your security, Internet Explorer has restricted this web page from running scripts or ActiveX Controls that could access your computer. Click here to...' If I allow it to run, the screen blinks but nothing seems to change. If I close the Log file and reopen it, it happens again. How can I stop this from happening to the file? Could this be the problem?
2) The Knowledgebase Article below tells how to create a new 'fake' log file to 'fool' the HotSync Manager. So I renamed the original log file, then created the new file as instructed. Then I did a HotSync. After the HotSync completed successfully, I opened the HotSync Manager and there is my new 'fake' log file that has only the words I typed into it when I created the file. Nothing in the Log about the operation at all!
Article ID: 38959 What does the error that ends with 'HotSync.log is missing' mean and how do I fix it?
The HotSync Manager is very particular: if it doesn't find things exactly as it expects, it won't work. One of the things it has to find in the right place is the HotSync log, a file where the HotSync manager records everything it does. See How can the HotSync log help me to troubleshoot HotSync problems? for more information about this file.
When you get this error, your HotSync Manager can't find the HotSync Log. This prevents you from performing a HotSync operation. Luckily, the HotSync Manager isn't too bright. Give it any file called HotSync.log and it will be happy again.
The easiest way to give it what it expects is to create a new text document, rename it, and put it in the folder where the HotSync Manager expects to find it. Here's how:
Launch the Windows Notepad. You can usually get to it by clicking on the Start Menu, choosing Programs, then Accessories and finally Notepad.
Type some text. You can type anything you want, as long as there's at least one character in the Notepad document.
From the File menu, choose Save As.
In the Save dialog, navigate to your user folder in the Palm or Handspring folder (find your user folder).
Name the document HotSync and click Save.
Launch Windows Explorer. You can get to it by double clicking on My Computer or by clicking on the Start Menu, choosing Programs and then Windows Explorer.
From the Tools menu, choose Folder Options.
Click on the View tab.
Uncheck the box next to Hide file extensions for known file types.
Navigate to your user folder.
Right-click once on the HotSync.txt document, and select "Rename" from the menu. Rename the file HotSync.log
Attempt another HotSync operation. If you still get the "HotSync.log is missing" message, contact Handspring.
Article ID: 38959 Article Type: Error, Troubleshooting, How To Date Created: Sunday, December 12, 2004 9:10:17 AM Date Modified: Friday, April 20, 2007 4:03:38 PM Relevant products: Treo 300, Treo 180, Treo 180g, Treo 270, Visor Edge, Visor Neo, Visor Pro, Visor Platinum, Visor Prism, Visor Deluxe, Treo 90
Post relates to: Treo 755p (Verizon)
Post relates to: Treo 755p (Verizon)

My imac screen keeps loading at the log in page

I cannot log in my account. The screen keeps loading at the log in page, even i try to reinstall the OS X. The imac cannot read the CD and keeps stay at the log in page. What is the problem?

This really is something to take up with a local Apple retail store or Premium re-seller. They will examine it and quote you a repair or replacement price. This is usually done without charge. Without knowing exactly what is wrong a guestimate would be worthless to you.

For some reason when I plug my phone up to charge it just keeps showing me the apple logo and then it goes away shows the battery sign is low and that its charging. So I'm wondering why it wont turn on would I have t get a new one, and would it be free

For some reason when I plug my phone up to charge it just keeps showing me the apple logo and then it goes away shows the battery sign is low and that its charging. So I'm wondering why it wont turn on would I have t get a new one, and would it be free

If you've tried the basic troubleshooting steps (restart, reset, restore from backup, restore as new), and you've tried charging from a wall socket and these all fail, then you have a hardware problem.
If your unit is still in warranty, you will be eligible for a replacement with a refurbished unit free of charge. If you are out of your warranty period, you will be eligible for an out of warranty exchange which will cost the equivalent of 200 US dollars.

I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

Which Fx version? When you uninstalled Fx, did you reboot computer before reinstall?
Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
Is your profile in the default location or custom location?
Have you tried creating a new, completely clean profile - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

I'm unable to open most of the websites. the message keeps displaying that the "connection is untrusted"...pls help fellas...thank you

after trying out some add on's and even after disabling them, and even after reinstalling firefox afresh, i'm unable to open most of the websites(including gmail, hotmail, facebook etc).where as my other browsers works quite fine. the message keeps displaying that the "connection is untrusted"...pls help fellas...thank you

See if this helps:
http://www.techiecorner.com/1065/firefox-this-connection-is-untrusted/

TS2755 My message keeps showing sending

My Messaging keeps showing sending. Its been a couple of days.

Back up, Erase all content and settings, Restore iPhone (downloads fresh iOS), restore from backup. Should fix. You will not lose texts, etc.

Unable to debug the Data Template Error in the Log file

Hi,
I am unable to debug the log file error message Please can anybody explain me in detail where the error lies and how to solve the error.The log file shows the following message.
XDO Data Engine ver 1.0
Resp: 50554
Org ID : 204
Request ID: 2865643
All Parameters: USER_ID=1318:REPORT_TYPE=Report Only:P_SET_OF_BOOKS_ID=1:TRNS_STATUS=Posted:P_APPROVED=Not Approved:PERIOD=Sep-05
Data Template Code: ILDVAPDN
Data Template Application Short Name: CLE
Debug Flag: Y
{TRNS_STATUS=Posted, REPORT_TYPE=Report Only, PERIOD=Sep-05, USER_ID=1318, P_SET_OF_BOOKS_ID=1, P_APPROVED=Not Approved}
Calling XDO Data Engine...
java.lang.NullPointerException
     at oracle.apps.xdo.dataengine.DataTemplateParser.getObjectVlaue(DataTemplateParser.java:1424)
     at oracle.apps.xdo.dataengine.DataTemplateParser.replaceSubstituteVariables(DataTemplateParser.java:1226)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:398)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:281)
     at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:251)
     at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:192)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:222)
     at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:334)
     at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:236)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:272)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
Start of log messages from FND_FILE
Start of After parameter Report Trigger Execution..
Gl Set of Books.....P
Organization NameVision Operations
Entering TRNS STATUS POSTED****** 648Posted
end of the trns status..687 Posted
currency_code 20USD
P_PRECISION 272
precision 332
GL NAME 40Vision Operations (USA)
Executing the procedure get format ..
ExecutED the procedure get format and the Result..
End of Before Report Execution..
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 2865643 on node AP615CMR at 28-SEP-2006 07:58:26.
Post-processing of request 2865643 failed at 28-SEP-2006 07:58:38 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 28-SEP-2006 07:58:38
Thanks & Regards
Suresh Singh

Generally the DBAs are aware of the OPP service log. They can tell you the cause of the problem.
Anyway, how did you resolve the issue?

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

I try to purchase pages (after upgrading to maverick) and get this message: Failed to verify the preflight file. It is not signed by Apple.

I try to purchase Pages (after upgrading to Maverick OS) and keep getting this message:
Failed to verify the preflight file. It is not signed by Apple.
How to I get past this? I cannot find anything referencing preflight file. Who can identify this?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL. Log out, log back in, and test.

Copying the log files

I am new to this product.
After the client accessing the Weblogic that works as a webserver it
ganerating the log files. Is there an option in Weblogic server to schedule
backup these files say every 30min to another machine?
Please advise
Thank you

I would suggest you to refer our online docs and re-post if you have any
specific questions.
http://www.weblogic.com/docs51/classdocs/API_file.html
Kumar
Alex wrote:
Senthil, thank you!
And it also can do backup on any drive, machine, even another subnet, or
only onto tape?
Thanks again
"Senthil Kumar S" <[email protected]> wrote in message
news:[email protected]..
U can use the weblogic time services to schedule a task which will do the
backup.
Alex wrote:
I am new to this product.
After the client accessing the Weblogic that works as a webserver it
ganerating the log files. Is there an option in Weblogic server to
schedule
backup these files say every 30min to another machine?
Please advise
Thank you

XMLForm Service message keep showing in the log file

Similar Messages

Maybe you are looking for