Xperia Multi-Camera App

Why is the connection between my Z3C & Z2 tablet so flak? It only seems to work randomly & ends up with either device just beeping, or me <bleeping>at them.
Both devices running 4.4.4 & only seems to work if both are already in the Camera app & set to Multi-Camera mode. And on the same wifi connection & the right phase of the moon ... or something. It seems a lot of work for not very much reward.

That is exactly how it is supposed to work. Not necessarily the phase of the moon. But everything else is right on.

Similar Messages

Xperia Z1 Camera App problem

Hello,
Four days ago I bought my Xperia Z1, and today I decided to test it underwater.
First thing that frustrated me was that video would just stop recording by itself and it would enter random aplications, or when I press shutter button, it would exit the camera app, and such things, but I thought that it was just reaction on water and that it was normal. Later my Xperia really went wild, it constantly opens and closes the camera app, without even me touching it. Phone just stands there on the table and camera app opens and closes. When I enter other apps, camera just pops up no matter what.
I tried a lot of things, even reseting back to factory setting, no use, so I just shut it down.
It's really frustrating since I bougth that phone primarily because of it's high resolution camera, and because it's waterproof, which obviously failed the first test.
P.S. Flaps were firmly closed, I checked multiple times.

You have touch block app,you can find it to block touchscreen while recording for example.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Xperia Z1 launching camera app unwittingly

Hello,
sometimes my Xperia Z1 is launching unwittingly camera app. Sometimes it does very often like every 3 seconds. I press home and then it appears again automatically. Sometimes It make once but never expected and bit annoying...
It is happening even though after I lock the display!!
Do anybody have solution? Thank you...

Try to perform a system repair and see if that fixes the issue
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Camera app pop up automaticall after ics update xperia s

After Updating to ICS my xperia s camera automatically popping up while i unlock the screen even try to dial a number before i can do any thing the camera application pop up very very upsetting indeed

Hello india286
Please use Pc companion in Repair mode to try to fix the installation:
Run the Pc companion Software
Turn the phone off and disconnect it from the computer
1. No matter what the program says do not connect the phone until you complete step 9
2. In the welcome screen if asked click on start, Next you will be shown what media go offers, click on "next" then you will see a presentation on what support zone offers, click on "Finish"
3. In the next section from "support zone" and "media go" new select "support zone" and click on start.
4. On the next page select "Software update" and click on "start"
At this point if you get an error stating that "unable to install update components" or "server is busy" Please proceed to step 12
5. The program will say that there is no phone connected and will ask you to connect but disregard that and instead choose the option to "repair Phone".(the program will issue you a warning on the content that you will lose during the update)
6. Choose the option to continue.
7. After that, the program will download the necessary information (5 to 6 minutes) and it will present you with a list of phones.
8. Choose the Phone from the list (close to the bottom of the list) click on the icon for the phone and then click on "next"
then you will see a new section telling you how to connect the phone. (don't connect it yet)
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC not to the phone, then follow the instructions on screen to connect the phone, if done correctly the program will say "the update of your phone has started..." (in some cases a message of "Installing drivers" will appear before the message of "the update of your phone has started..." is shown.)
10. If you failed to follow the steps correctly the phone will turn on and it will request that you "Proceed with the following steps, slide down the notification bar", If this happens disconnect the phone from the cable, turn it off and repeat from step 9).
11. If the PC Companion proceeds correctly wait for the update to finish and follow instructions on screen.
Dear customer,
12. If "unable to install update components"
1. Close Pc companion
2. Install Java from: http://www.java.com
3. start Pc companion again and try to do the software unlock process once more.
If this fails let me know, you might need to send the phone in.
Best regards
Francis.

Xperia Z1 lag camera app

I just upgrade my Z1 to lollipop with the latest firmware, but since the first lollipop relased, my default camera app started to get laggy when I move my phone. It doesn't happen in the older version of android, but it does in lollipop. I wonder if you guys have something in common and know how to fix it?

Hi
Try to clear the data.
Settings > apps > all > Camera > clear data.
Remember, it's gonna reset every setting you did in your camera app
If the above doesn't help you, kindly go for a software repair as it would help your phone to get free of glitches and lag and improve performance and user experience.
Here's how. And do not forget to backup everything before performing a repair
Update / Repair your phone via PC Companion
Download PC Companion and install it. Do not connect your phone until you're asked to do so.
Launch PC Companion > Start Support zone > Start Phone/ Tablet Software update > select Repair my Phone / Tablet > Follow the on-screen instructions it shows.

Color adjustment on Multi-cam clip in 10.1 not working and crash the app

In version prior to 10.1, I can do color adjustment on multi-cam clip and I can see the color change right away.
However, when I do the same action in 10.1, the change doesn't reflect immediately on the viewer. I need to move like a frame to have the effect shown. Sometimes, FCPX shows an error when I do that action and force me to quit the application.
Anyone having similar issue?
Any solution?

In version prior to 10.1, I can do color adjustment on multi-cam clip and I can see the color change right away.
However, when I do the same action in 10.1, the change doesn't reflect immediately on the viewer. I need to move like a frame to have the effect shown. Sometimes, FCPX shows an error when I do that action and force me to quit the application.
Anyone having similar issue?
Any solution?

Multi-issue app with subscription not show any issue of the magazine

Hi all,
I recently migrated my magazine from multi-issue app to multi-issue with itunes subscription app. I want to publish my magazine into the newsstand with free subscription.
If I install on my ipad the .ipa I see all the issue published in the last year and a half. I can subscribe the free subscription and all working properly.
When Apple store approve the app they told me that no magazine appears in my app (and the screenshoot they attached me confirm this).
I can't understand what could have happened.
On the development ipad was previously installed the normal version of the app (with no subscription). Is this a problem?

I agree with poorxperiaplay here. The problem is directly related to all Google services not just Gtalk, thats why Gmail doesn't sync right, nor does the calendar, nor does it work right when you pick out an app on the Google Play web site on your PC and try to install from there. It never live syncs with the server.
You can't just take out features like that because you broke them and then say sorry. People rely on the Google services, its why we bought an Android Phone! Not only that, ALL other versions of the Xperia Play, R800i, R800a, R800at, all run 2.3.4 official from Sony successfully. Verizon modifies it for roll out to their phones, to add their software, which means your product team broke it, and they aren't spending the time to fix it.
And yes the facebook application does not sync properly or even work properly on 3G either. The sync issue has been a problem from day 1. The web site on the phone works fine.
These are major issues that are fundamental to all R800x phones. This needs to be fixed, immediately.

FR: Full Screen Preview of Multi-Camera Angles

The Program monitor can be viewed in Full Screen mode, as we all know, but when the Program monitor is displaying Multi-camera angles, it can only viewed in windowed mode. Full Screen mode no longer works in this situation. This is inconsistent, illogical and unproductive, thus my new FR for Adobe to allow the Program Monitor to be viewed in Full Screen mode, regardless of what it's displaying:
(feel free to copy/paste and send as your own FR here: www.adobe.com/go/wish)
How would you like the feature to work?
*******Enhancement / FMR*********
Brief title for your desired feature: Full Screen Preview for Camera Angles
How would you like the feature to work?
The Program and Source Monitors can both be toggled in/out of Full Screen mode with a single keyboard shortcut, a fantastic feature. Why then can't the Program Monitor display in Full Screen when it's displaying Camera Angles, either with the Multi-Camera Preview Monitor on or off? A window that can be viewed in Full Screen should always allow full screen preview, regardless of what it is displaying!
Why is this feature important to you?
Consistency and a logical, productive UI is beneficial to all editors. The fact that the Program Monitor window can be viewed in Full Screen in one instance but not another, is illogical, inconsistent, and a productivity hindrance that should be fixed.
Ideally, Adobe could give us a separate, Full Screen capable window for displaying Camera Angles. This way users could display their Camera Angles on one monitor, and their Program Monitor on a second monitor, all in Full Screen mode, without the visual polution of a windowed interface whenever that interface does not contribute to the editing task at hand! Here is my thread regarding that request: Help Improve Premiere! FR: Separate, maximizable Multi-camera view. However, should Adobe be unable or unwilling to provide us with the suggested interface that would provide maximum customizability/flexibility, at the very least having the option to view our Program Monitor in Full screen mode when viewing Camera Angles would be useful.

The iSight is either 640x480 (older MBPs) or 1280x1024 (newer MBPs). Displaying it 'full screen' especially in an older MBP (which is what you have if you're posting in the correct forum) would result in a horribly pixelated image, not 'high resolution'. The apps that show the iSight feed are showing it at its native resolution, and that's a limitation of the hardware. If you need higher resolution, you can attach a higher resolution video camera (for example, my Panasonic DV camcorder connects via FireWire and can be used as a webcam).

Freezes after setting ISO in camera app

The phone freezes after the following:
1. Set ISO to 800 in manual mode click a picture or two.
2. See the images from preview panel in camera app(touch bottom right of image)
3. Get back to camera.
The only way to get back is to restart the phone using hard keys.

Last thing you can try, repair your phone with SUS or PCC and stay away from taskillers, task managers, antivirus, ram apps, booster apps, etc
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Change default picture viewer in camera app

Is there anyway of changing in the camera app the default picture viewer it opens up with album still?
The album viewer open all pictures from non camera folder which I am not cocomfortable.

Hi Parikhjimmy,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines
Once you have done the above the next time you try start the viewer it will supply multiple options, make sure to choose the one you want and if you want to make this the indefinite option press Always.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Multi Camera with DSC-HX400V?

Hi, does anyone tried out the multi camera feature with the Sony HX400V or is that not possible to share the view of both devices?
Solved!
Go to Solution.

I can confirm it works, I have Xperia Z3 Dual (D6633) and Cyber-Shot HX400V coupled in multi-camera mode, here's a screenshot:
Right: Cyber-Shot HX400V, Left: Xperia Z3 Dual (D6633)
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

Proble with multi-threaded app using the same connection

have a multi-threaded app. The threads all share the
same connection. They all do some selects / updates.
The OS is NT 4.0 and the application server is weblogic
Some times I am getting the error "java.sql.SQLException: Io exception: not in streaming mode"
and some times I am getting "java.sql.SQLException: Io exception: Protocal violation
Any Ideas?
Regards
Suresh

Don't create threads.... Your threads should if they are necessary be reusable, your threads should call the connections it needs from the cache service with let's say a max number of N pools (each pool a max number of M connections), if the connection domain asked exists on cache a connection is asked for corresponding pool, if the connection domain is not on cache the less used domain is thrown away (all inner connections closed first) and substituted by the new one requested. While the pool is not full keep creating connections as the request came (and all existing connections are being held and not released), when M connections exists, a request should wait till a connection is released.
If you can have 20 threads asking for the same connection and the max number of connections on pool is M=10, then yopur threads will wait for a connection being released. All this must be synchronized. You should set M the closest as possible to the normal number of requests you can imagine to happen the same time. You should get connection use it and release it right away if you can have a lot of requests.
I hope this helps you.

CS4 Multi Camera Re-recording not working!

Ive started using multi camera monitor in CS4 for the first time today.
Have used multi camera in the past a lot in CS3 with no problems.
In CS3 when I made a mistake when switching between cameras I could just go back and it would over write everything as it went along. In CS4 I find that when I go back it splits the clip at the point when I click but following that when the next clip change comes up it does not over write it!
This is highly slowing to my editing process, the help files seems 2 say that it should over write although I cannot get it to do this!
Anyone have any advice?
Thanks in advance
Thomas

Guys your charging premium dollars for you product. event videographers like myslef are phoabing in the mouth, give us somthing to say why Adobe products are more superior than Vegas Edius and other SW.
Unfortunately, we're all just users here an no one works for Adobe*. Also, Adobe does not normally read these fora. You need to contact Adobe with your issues.
As for PrPro not being 64-bit, that has never been stated. It has, for PS, which is the only app. that IS written for 64-bit. The rest are certified to run under Vista-64, but there is a major difference. Sorry that you got confused.
Good luck,
Hunt
* now, it has been whispered that Jim Simon might be an Adobe spy, and that Harm Millaard gets to dine in the Adobe cafeteria, but those reports have not been confirmed.

Camera app auto start

the camera app from my xperia z1 it's auto starting every time. I restart the smartphone to the original settings and the issue continue
Solved!
Go to Solution.

Go to camera app-make sure you are on manual mode-tap on 3 dots (settings) -quick launch-off.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Video glitch: Flashing during multi-cam playback

Mac OSX Yosemite 10.10.2. Maxed out iMac 2013.
Latest Adobe PP Patch 2014.2 Release Build 8.2.0 (65)
I'm having an issue with my multicam. When I perform a roll or slip edit, it causes the Program Monitor (which is in multi-cam mode) to flicker between either a black screen, or a previous edit. It won't do playback either when this occurs. Sometimes I can fix the issue by opening a non-multicam sequence, and then clicking back to the multicam sequence, but more often than not, I have to quit. In a 30min multicam, this occurs however often I need to change my tool, which may be 10 times.
Anyone else had this? Is is my GPU drivers on my Mac? I have no idea how to update those drivers on mac, traditionally it's done for me via App Store and not often since drivers are not updated as often as Windows. This was never a problem on Mavericks. Anyone else?

Hi Lawrence,
Try this:
Please go to File > Project settings > General and change the Video Renderer to Mercury Playback Engine software only. Click Ok and select Delete Previews.
Let me know if this helps.
Thanks,
Rameez

Xperia Multi-Camera App

Similar Messages

Maybe you are looking for