Yet another claim for footnotes

Dear Apple,
not trying to summarize the several previous discussions how to add footnotes (and ending with nothing substantial) I just would like to emphasize the need to include this into ibook authors if this program is intended seriously.
Hoping for further supporters and expecting an update
hwg_ros

If you wish to submit your request to Apple, you can do so here:
http://www.apple.com/feedback/

Similar Messages

Maybe yet another posting for boot noises...

Each and every time I start or reboot my MacBook, I have to endure the harmony of two noises: the everything-is-OK chime, and the spin-up noise of the SuperDrive. I have wasted my time trying to disable them only in vain (
StartupSound Preference Pane did not work). One answer I found this Apple Support Communites was actually smash the SuperDrive (i.e., there is no way).
Why does Apple just give a simple option to disable them for the users who want to do so? It would just take one day to implement the option. I know like 99.9999% time it boots without a problem, why should I hear the chime? I do not use a DVD rom to boot (in fact, Lion does not even come on DVD), why cannot I just set the boot device order like with all other computers?
Yes, there are lots of Apple fans, but these kinds of inablity to customise the system waste lots of people's valuable time around the world, and make people want to use other OSes. Even if like 80% of the users do not care about the boot chime and boot spin-up noise, if an Apple engineer can spend one day and can save 20% the users around the world out of their misery, is this not enough?
P.S. : Yea, I will remove the SuperDrive next time I open up my MacBook.

No.
First, even if it is 2%, not 20%, the option could be easily implemented. 2% of MacBook users could be millions of people. As if one engineer could do so in 2~3 days. If that can benefit a million users, cannot this be justfiable?
Second, giving an option does NOT impact other people. If they are happy with the boot chime, they would NOT turn it off, and it does not make any difference if there is an option for that. If choosing not to boot from a DVD rom is an option (like in most laptops), it would make no difference to people who does not change the option. I know what I am doing, so just give me the options.
I am sorry if this forum is not suitable for my post. I did not want to order Apple to do something. I just wanted to share my feelings on these problems, with other users.
I know MacBook is great laptop. It is like 90 things out of 100 things are good, and 10 things are bad.
People who only talk about the 10 things are Apple-haters.
People who are just too facinated by the 90 things and cannot say no to the 10 things are iSheep.
People like I enjoy the 90 things but also criticise the 10 things so that those could be fixed.
red_menace wrote:
You pretty much hit it right there - Apple (or anyone else for that matter) isn't going to do anything for 20% of the users if it can impact the other 80%. The inability to customize these things also avoids wasting time with service calls, and it would certainly take more than a day to engineer a way to disable these things yet keep them functional - a power on self test won't do much good if you can't indicate the results, now would it? Some of those optical drives are a bit noisy, and not just at startup (later models are quieter), although that doesn't have anything to do with the machine trying to boot from it.
The appropriate place for these kinds of feature requests is http://www.apple.com/feedback/, since no one here can do anything about it.

Any Help For Yet Another HDCP For Playback/Netflix Problem?

I have a very complex set-up and had no problem streaming until the other night and I have tried every single solution I can find online under the sun so that is why I am posting here.
I have a Pioneer Receiver that I used a Terk Smart HDMI 3 x 1 Selector with and was able to stream Netflix with no problem.
This is how everything used to be set up:
Pioneer Receiver
Blu-ray IN
HDMI OUT Terk
DVD IN
Panasonic DVD Recorder OUT
OUT
Panasonic LCD TV HDMI 1
Terk HDMI 3 x 1 Selector
OUT
Pioneer Receiver Bluray IN
Panasonic Bluray Player
Input 1
AppleTV (3rd Gen.)
Input 2
Mac Mini (2010)
Input 3
Now here's the rub: I also have a PS3. I used to unplug either the ATV or Mini whenever I wanted to use it and I got tired of switching out so I bought a Monoprice 8 x 1 HDMI Selector. The logic here being that I would have more than enough HDMI inputs to plug in everything.
When I first hooked up the Monoprice, I hooked the OUT from it into the Bluray IN on the Pioneer and then hooked all of the HDMI cables from all of the various electronics into the INputs on it. Tested all of them to see that it autoselected whatever I had chosen and even was able to stream on NF.
This is how I have everything hooked up now:
Monoprice 8 x 1
OUT
Pioneer Receiver Bluray IN
ATV
Input 1
Panasonic Bluray Player
Input 2
PS3
Input 3
Mac Mini
Input 4
Panasonic DVD Recorder*
Input 5
*Bluray IN and OUT are the only HDMI slots in use on the Pioneer Receiver using this hookup.
Now all of a sudden yesterday I went to stream NF via the ATV and I got that "This content requires HDCP for playback" error.
I did everything I could think of and also tried all of the suggestions I could find on the web. I had already switched out the HDMI cables as I had bought new ones when I got the Monoprice. So I hooked the Terk back up thinking it would "fix" things. No dice. I put the old HDMI cables back on. No dice. I have it hooked up now with the old HDMI cables and still no dice. I unplugged everything and let it sit thinking I could force a new HDMI handshake. NF started streaming for 5 seconds and froze -- and then the error message.
I also have a Scientific Atlanta DVR that the ATV is plugged into that the HDMI 2 of the Panasonic TV is connected via HDMI. The Panasonic TV isn't "old" as I think I got it in late 2009 or late 2010, as it has more than enough HDMI inputs, component, and also a PC connection -- in case someone wanted to suggest the TV wasn't capable of handling the hookups. The ATV is running the latest version of the software.
This is really frustrating since it worked with no problem from the day I got the ATV and now after upgrading the switcher to get more HDMI inputs, everything went kaput.
And I just don't know what to do.
I'm not sure if having everything being dependent upon the Panasonic TV being powered on is affecting things, but it never affected things when I was using the 3 x 1 HDMI switch. When I wanted to use the ATV, I'd press the Bluray input on the Pioneer receiver, hit the ATV remote and it would come on. Click into NF and voila: streaming with no problems.
Currently, I still do the same thing -- and I can listen to the radio, stream in iTunes Match on the ATV. It's just the NF issue that's really beyond me. The only thing I can think of to try is to maybe put the DVR in the surge protector slot so that it has to be powered on so that everything else will power up instead of the TV?
I'm hoping someone has a suggestion that involves something other than restarting/restoring the ATV, or unplugging things for 30 seconds because I have tried everything I've come across. I just don't know what to do but I really would like to be able to use NF on the ATV because I like the fact that it plays in Dolby, and I really don't want to have to go back to the PS3 to utilize that feature.
In the meantime, I guess I will switch the DVR on the surge protector with the TV and see what happens if I change the way things power up in the chain.

I am at a loss. I thought I had a micro USB cord but since I didn't, I wasn't able to downgrade the software.
I did a complete restore for kicks.
This is the current setup
ATV HDMI
Panasonic TV HMDI 2
ATV optical output
Pioneer Receiver
Again, all of the other devices run through the 8 x 1 switch box which is NOT powered on to use the ATV.
I get the HDCP error whenever I try to access the following:
Netflix
Trailers
Vimeo
WSJ Live
HHL and the other sports channels
These work fine:
Radio
iTunes Match
Podcasts
Flickr
TV Shows and Movies because I tested both watching previews and they streamed perfectly
I've changed the settings on the ATV until I'm blue in the face and this is what they are currently:
Dolby - Auto
Audio Output - Auto
HDMI Output - Auto
TV Resolution - 1080p HD - 60Hz -- and yes I've had it set on both "Auto" and 720p HD - 60Hz and neither stopped the error once it started happening
All of the equipment is HDCP compliant as I checked
The cable between the TV and ATV
The 8 x 1 switch box
Panasonic TV specs -- it is HDCP compliant as I said in my 3rd post (according to the manual)
The Pioneer Receiver (for good measure)
I have no idea of what to do other than to hope that Apple does something with the next update to restore everything, as this HDCP issue is really beyond annoying and it's clear 5.2 broke something. In the meantime, I really am open to suggestions to try something else other than smashing the ATV with a hammer

Yet another script for Cyclosaurus to write (please)!

There are lots of posts about people losing their domain files, I myself in fact lost a page (Thanks Jim!) and had to rebuild it.
This spurred me to create backups of my domain files, that I manually juggle! (As well as a full system backup, one was due)
Then I thought to myself, wouldn't it be nice if there was an app that you could click, and it would take a copy of your current domain.sites file, add a time and date stamp to the name, and then store it in ~/iWeb Domain Back Ups?
Anyway, just a thought
Will

Folks
I am seeing lots of issues regarding corrupt & lost websites.
I can only strongly recommend that you BACK UP your work.
Backing up should be a standard routine, yes even on a Mac
With regards to keeping a copy of your nice shiny new iWeb website, this thread discusses keeping a second copy on your hard drive. This will not save you if your hard drive fails, for this you need to backup elsewhere (For instance an external hard drive).
The key iWeb file (domain.sites) is stored here:
User / Library / Application Support / iWeb / domain.sites
Either manually create a copy of this site and save it somewhere safe, or use the Script above.
Happy iWebbing
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.5) Getting Started with iWeb - Tips here

I'm going to another country for a year and I would like to unlock my phone to take another sim other than my carrier. My contract with my present carrier is finished yet they still wouldnt unlock the iphone 4 for me. How can I be able to unlock it?t

I'm going to another country for a year and I would like to unlock my phone to take another sim other than my carrier. My contract with my present carrier is finished yet they still wouldnt unlock the iphone 4 for me. How can I be able to unlock it?t

Only the carrier to whom the device is locked can unlock it.
If you do not meet their requirements or they do not offer unlocking there is no official way to unlock the device.
Who is your carrier?

YAIS - Yet Another Installation Script for Archlinux

I wrote this script today and placed it in AUR. It can show you the way and make it easier to install an archlinux system.

orschiro wrote:
https://aur.archlinux.org/packages/yais/
Can you provide some more information?
Your README is not very extensive:
yais
Yet another installation script (for archlinux)
I updated the README, and added a TODO to the git repo. I also rewrote the PKGBUILD. It will be OK now.

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

Is this yet another problem with 7.5 or is it just me . . .

Upgrade seemed to be fine, at first . . . now I keep getting distortion on songs. It seems to be quite random and just because a song has been distorted when I've listened to it once doesn't mean it will be when I listen to it again! It's driving me insane. Is this yet another bug or have I done something wrong (apart from upgrading to 7.5).

Hi Emlou,
If you have a Windows based operating system such as XP -
It seems to me that you are suffering what I am having the same problem with - the program takes up to much of your computer's processing usage. If you go into your task manager and watch performance as ITunes runs - you will see how much of the total computer usage it is taking at any given moment - that's why your songs are distorted, slowing, garbled, etc - the usage on mine spikes from 11% - 93% AT ANY GIVEN MINUTE! I have no idea why, but I have found that by going to your "Control Panel" and clicking on Quicktime you can adjust audio output to help. Click the audio tab, click Safe Mode Wavout only (checkbox) / Then adjust the "Rate" to 96kHz / Then adjust the "Size" to 16 bit. Close that and shut down and restart Itunes - it might help a little for you.
Maybe someone out there can help us find out why we are suffering with all the CPU usage trouble and how to adjust that spiking.
Thanks!
Paul

Yet another No Service iPhone 4, second hand

Hi all,
Apologies for yet another topic about the No Service issue on the iPhone 4. I bought a secondhand iPhone 4 16GB 2 days ago after having a 3GS 32GB for 18 months with no problems. iPhone 4 was just over a week old when I bought it (warranty date shows when it was first activated), on the O2 UK network like my old one.
All was fine for 2 days, was receiving and making calls and texts etc with no problems. But since late afternoon yesterday the phone has mostly said No Service. It occasionally goes onto O2-UK but with no bars of signal so calls and texts still fail immediately.
I've tried all of the tips I can find online to resolve this, airplane mode on/off, reset network settings, restore from backup, restore as new phone, hard resets. But nothing's working.
I can take out my SIM and put it into my 3GS, in the same location, and get 5 bars of signal, all my texts come through. Then put SIM back into iPhone 4 and straight away, No Service.
I've made a Genius bar appointment for tomorrow afternoon, but I'm wondering what happens regarding the fact that I'm not the person who bought the phone in the first place? Will this be an issue?
Thank you in advance for any advice about this, was so looking forward to having this phone and now, bleh!

I spoke to o2, they checked my SIM is activated and said they don't need a record of my IMEI number. Still saying No Service so will have to see what the "Genius" says tomorrow!

Yet another Mac Book Pro (A1211/2.33 GHz) freeze problem

Hi everyone,
I have yet another freeze mystery, if people fancy having a crack at it.
I had this notebook for about 4 and a half years and it served me well until 2 months ago. It is a 15' MBP from December 2008 (A1211) with a 2.33GHz Core 2 Duo and 2GB of RAM.
Now I constantly get lags or freezes while I am using it.It manifests itself via the beachball and a frozen screen. First, I thought it was the hard drive but I replaced it with a tested new one and I still get the same behaviour. The reason I thought it was the HD is that it seems to freeze often when there was a lot of access to HD or memory. For example, firefox would cause a freeze quite often when it was trying to access the cache or history. I get the same behaviour when trying indexing my music for the genius feature. Often when I close applications, it will halt the system for about 2 minutes.
I think the number of lags also correlates with temperature. I am pretty sure that the notebook's heat diffusion properties has deteriorated strongly over the past year as it seems to be using the fans a lot more extensively. The heatsink seems to get really hot these days as well. So my next step would be checking the thermal paste on the heat sink. Before I am going to do that, I want to consider any remaining options as dismantling the laptop up to the heatsink is a bit of a pain.
My gut feeling would be that it has to do either with the memory or maybe some 'bridge' that transfers the data between HD, GPU, CPU and memory. I am aware that bridge is the wrong word and I am simplifying the architecture of the mainboard too much, but I am sure you get what I mean. The data rate between some of those is inhibited.
The reason why I am saying some is that often the system seems overwhelmed by the amount of commands, just sits there and then resumes executing all of them as it had taken a break. This can be easily seen when streaming video in a web browser. I often get the beach ball and my whole screen freezes, but the movie, or at least the sound, keeps running in the background. After a while it usually resumes and shows the movie at the current playing position. Sometimes it doesn't recover, not even after 30 minutes and I have to switch it off.
I hope I provided enough information for you guys to have a think about this.
Any help in this matter would be gratefully appreciated.

Before re-installing the operating system, which might also work, I found this article helpful:
http://macs.about.com/od/usingyourmac/qt/Fix-Spod-How-To-Fix-A-Spinning-Pinwheel -Of-Death.htm
I've followed the directions since they seem to make sense and am waiting for the next Pinwheel of Death. They seem to be saying the same thing you are Chris, but ascribe the problem to 'permissions' which are fixable (gasp) via the OS disc utility.

HT204368 After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth plantronics model M25. I tried reset all settings after turning on and off also submitted diagnostic. Do I have to buy yet another bluetooth set?

After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth, plantronics model M25. I tried reset all settings after turning on and off also submitted diagnostic. Do I have to buy yet another bluetooth set?

Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

Yet another grey folder thread, help!

Sorry for yet another grey folder thread, but here goes:
Today, earlier, installed Firefox update, along with some addon updates for that program. Quit Firefox and attempt to relaunch, relaunch fails. Reset computer, thinking that will do the trick, I now have grey folder with question mark.
Resolve attempts: reset pram = fail; apple care cd = will not launch/fail; disk utility from original install disks = fail; cannot get repair of disk or permissions to work, continually get error about "failing on exit"; safe mode launch = fail
So, I've done everything, and I've come to conclusion that I am f***, and my HDD is fried (but I hope I am wrong).
So, dear gurus, my question(s)
A) Is my HDD salvageable at all? is there some trick to getting the AppleCare cd to work? Anything?!?!
if not, then B) How can I recover my documents/music/pictures? Long story short, there are several things on there that never had a chance to make my back up schedule, and I desperately want to keep them. Any way to make/copy a disk image to save the docs/imgs, or Firewire them to an external hdd? Do I need to consider a professional HDD rescue?

Looks like a mechanical failure, and Apple won't cover the replacement due to a drop it sustained a year or two ago (the power cable was in, and it fell on the connection point, denting that in, Apple states there is a critical board their and that it would be $950 Tier 3 repair which I can't afford). So I'm going to try a Firewire Migration and a few other things and see if that works. If not, oh well. Thanks everyone for the ideas!

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Display hints, custom format method in VO, is there yet another way?

Did you experience the same and had a solution?
Hi,
I am using JDeveloper 10.1.3.4 and looking for yet another way of customizing the display of an attribute of a view object.
I have two tables: BILL and AWARDS, with composite foreign key relationship (on the LDAP_UID and TERM fields) between them, as illustrated below.
The BILL table:
NAME       LDAP_UID    TERM   CREDIT_HRS
Tom Smith tom.simth   200902       12.5
Jane Lopez jane.lopez 200906        4.0
The AWARD table:
LDAP_UID    TERM SOURCE     APPLIED
tom.smith 200902 Perkins     2000.00
tom.smith 200906 Direct      1300.00
jane.lopez 200906 CN           500.00 At the business data model level, this is master(Bill)/detail(Awards) relationship. Bill is dragged from the data control palette to the page and displayed as a form, and Awards is dragged to the page as a table. When tom.smith logs in and chooses the 200902 TERM, the master and detail are joined on tom.smith=tom.smith and 200902=200902, so the $2,000.00 of Perkins loan is retrieved for him:
Name Tom Smith
Term 200902
Source    Applied
Perkins   $2,000.00That works fine but not user friendly: the values in the TERMS column are a bit cryptic and need to be displayed in plain English, i.e., 200902 should be displayed as "Spring 2009" and 200906 as "Summer 2009". The display hints in the VO can not handle this. The only other way I know is writing a method in the Row class of the VO to do the translation. And this is the result:
Name Tom Smith
Term Spring 2009
Source        Applied
No rows yet   Obviously, "Spring 2009" is used not only for display, but also for joining the master and detail tables. Of course "Spring 2009"!=200902, therefore no detail is retrieved for the user.
Question is: is there yet another way to customize the display, that does not affect the join of master and detail tables?
Many thanks for your help!
Newman

Hi, Chris,
That works!
I found the chapter where transient attribute is explained and an example is given creating a transient attribute in the entity object. It turned out that transient attribute works both in entity object and view object. I did it in the VO and it solves my problem.
I spent hours of time before posting that question, trying two different ways but neither worked. Your one sentence saved me a lot of time. I do appreciate you help very much!
Truly,
Newman

HT4191 why do you need yet another email address to sync notes

Is there a way to sync ipad notes with an imac desktop without opening up yet another unwanted "email" address? Why do compaines constantly demand that you open up email addresses through all of them?

Notes are very special, their sync is done by IMAP(mail) server that syncs our emails. In order to sync notes you "have to" be connected to that IMAP and mail account is "your connection". BTW mail "ON" button will not sync your emails - it only syncs email settings between devices, like server rules, blocked servers, etc. It will not reflect on other icloud stuff, but what it will do is move your notes sync from current sync ( if one exsits) to different. For example you notes currently can be local (on my phone), Yahoo or exchange like google. (you can check that by going to settings - mail contacts and calendars- and under your mail accounts you will see small "contacts" "calendars" and if you will see "notes" that would be your current syncing IMAP.

Yet another claim for footnotes

Similar Messages

Maybe you are looking for