Yet another Nano 6th Gen with power button failure

When is apple going to put its hand up and admit there is a problem with the 6th Gen Nano. My daughters 13 month old 16gig ipod has a power button failure the same as so many others. At £120 odd its already an expensive bit of kit without having to purchase an extended warranty. Pay another £50 for a repair and another years use? I dont think so.
I notice the sales pitch boasts the new ipod has been "completely renanoed" Come on Apple why dont you look after the little people and give us a decent trade in on these faulty year old ipods against a new sorted one? Patrick

Well a robust defence of your product Apple well done!

Similar Messages

Ipod nano 6th Gen with engraving?

Is there any way i can still purchase an ipod nano 6th Gen with engraving?

Only if you find one in a store somewhere and then take it to an engraving firm.

My i pod nano 6th gen keeps powing down 1 minute into a song. It is fully charged

My I-pod nano 6th generatio has a full charge but keeps powering down 1 minute into a song.

Your nano is pausing playback when the screen goes dark (Either when it goes dark on its own or when you click the sleep/wake button). The reason for this is that it is not detecting your headset. You may be able to hear music, but the headset jack is not inserted enough for the nano to detect that it is there (or something is blocking the connection). Here are your three options:
Insert the headset jack harder. Most folks find that this solves their problem. If you can see ANY of the silver of the plug when it is inserted, it is NOT fully inserted. You should feel and hear a click" when it is fully inserted.
Clean out the crud in the headset port. If you have tried #1 and it just won't insert all the way, it is likely that you have crud in your headset jack. Shine a light in there. The entire inside of the jack is white, so if it looks dark down at the bottom, there is probably crud down there. You can try blowing it out or using canned air. Just understand that shoving anything else in there to clean it out will be taking your warranty into your own hands! However, I have cleaned mine out using whatever was handy and small enough to fit in there and so far so good. Your results may vary!
Take it to the Apple store. If you have really tried with 1 and 2 and it is still happening, then there might just be something up with your headset port or your headset jack. If it is the headset jack, you can look closely at that and be pretty sure if that is the problem. Try another headset to make sure. If you have worked all the way through to this point and it is still happening, it is time to take it to the Apple store.
i

When listening to nano 6th gen with dock the audio book will make beeping noises and then switch to a song.

While listening to my 6th gen nano on a JBL dock the audio book will make beep noises and then swith to a song on my nano. Any idea? Thanks.

I saw your other post, but thought I would reply here as well. It is all about getting that headset seated all the way. If you can see any silver of the plug, it is not in far enough. Push harder. If it just won't go in, look in there to see if it is blocked. The bottom of the headset port is white, so if it appears all dark at the bottom... something is in there.
i

How do I move my iTunes library to another Nano 6th gen?

I have a Nano 6th generation as does my wife. My Nano broke. My wife doesn't use hers. So, I would like to synch my iTunes library to her Nano. How can I do so? i.e. I would like to "slick"her songs off hers and move my library onto it.
Thanks

Click here and follow the instructions.
(110147)

My ipod nano 6th gen wake/sleep button is not working what should i do?

I was using my ipod suddenly its wake sleep button stopped working else all is right i am not able to use my ipod as by that button only all things can be operated i dont know where to take my ipod for care

Hi Atique ur rehman,
Thanks for your query.
If the sleep wake button on your iPhone is unresponsive, first try and reset all setting by going to Settings>General>Reset>Reset All Settings.
If this does not resolve the problem, I would sound more like a hardware based issue.
I would recommend that you contact AppleCare so they can run further tests and diagnostics to help you solve your solution better.
If you can also access an Apple Store Genius Bar or Apple Authorized Service Center, that would be much better.
Go to https://locate.apple.com/country for further support with your device!
Thanks,
KL

IPod Nano 6th Gen can't save my run

anyone can help me with this?
i'm using iPod Nano 6th Gen with nike plus. everytime i hit end workout my ipod is rebooting itself and can't save my run however when i jack my ipod to my treadmill that problem doesn't occur. i try to ask for help to the nearest ibox in town but unfortunately they're not helping AT ALL!!! fyi the software is updated from time to time and currently using version 1.2PC and i have 13.3GB available
so anyone has experienced this kinda problem please let me know how to fix this. thank you

after i tapped on the end workout, it showed the apple logo. I waited for about 15-20 secs and it went back to the main screen with the icons
then i checked my history go to workout totals and it showed the apple logo (again) and went back to the main screen (it means it's not recorded right?)
thanks for helping

My ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

my ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

You can try Restoring it in iTunes but I believe you will end up needing to have it serviced.

Ipod nano 6th gen damages headphones with an inline mic?

I have been using skullcandy earbuds with inline mic/ remote with an iPod nano 6th gen. The problem is that songs will skip automatically, voice over comes on inadvertantly, and volume will go up and down by itself. at first i assumed it was the headphones since it seemed that a button on the inline remote was sticking and causing all of these inadvertant problems. but, i got brand new set of earbuds, different cheaper brand with inline remote (iLuv), and first tested them on my iPhone. they worked perfectly on the iPhone for several weeks. I then started using them on my iPod nano, and a few days later noticed the same thing as before - inadvertant skipping, voice over, etc. When i tried to use the same earbuds again, but on my iPhone, the problem persisted indicating that the headphones were now damaged. That is when i realized it must be the iPod somehow short circuiting the earbuds, since it happened on two separate sets of earbuds.
Has anyone experienced this problem before when using earbuds with an inline remote / mic? is it possible that the earbuds are not compatible with the iPod? i am worried that this is a hardware issue and cannot be fixed by software update....

Did you try doing a Reset on the iPod (which restarts the iPod)?
http://support.apple.com/kb/ht1320
If that does not help, you may want to also try doing a Restore of the iPod in iTunes.
http://support.apple.com/kb/ht1339

IPod Nano 6th Gen - Functional but white screen on pressing wake/sleep button

Hi
I have an iPod Nano 6th Gen (out of warranty & applecare) - hasn't been dropped etc & never had any trouble.
This morning I got the white screen after unplugging it from charging.
I have tried hard reboot (power button + vol down). I have put it into disc mode (hard reboot + both volume buttons) and restored it to factory settings from itunes (10.6.3) . I've even put it into diagnostic mode and looked around to see if there were any tests I could do.
Functionally the ipod works ok - plays music, volume changes, and it will shuffle on shaking/ play pause on double pressing the power button.
The problem is when I switch off the screen by pressing the power button once - if I try to switch the screen on again I only get the white screen (although this doesn't affect music playing etc).
The way to get around this is either doing a hard reboot (which is a pain as it removes all my settings) or by switching off the ipod, waiting 5 minutes, then switching it on again (this preserves my settings). If I switch off the ipod and try to switch it back on within 5 mins, it's straight to the white screen.
The only other odd thing I noticed was that the screen was shaky/jolty and graphics not quite lining up etc, but this only lasted 10s and went once I started playing music...
Any ideas as to what is causing this? I'm guessing maybe a hardware problem but it seems strange that there is no white screen on switching on, just from waking.
It was a present from my dad and I'm very fond of it so would like to keep it/fix it if possible!
Thankyou!

Hello bfsf,
Welcome to the Apple Support Communities!
I understand that your iPod nano (6th generation) displays a white screen after waking from sleep. First let my say that you have completed some great isolation and troubleshooting steps on your own. Because the issue is still present after the fantastic troubleshooting you already completed, it may be necessary to have this iPod evaluated for service. If you would like more information on this process, please read over the information in the attached link.
Apple - Support - Service Answer Center
Cheers,
Joe

My ipod nano 6th gen will only turn on when plugged into a power source.

My ipod nano 6th gen ONLY turns on when it is plugged into a power source. As soon as I unplug it, it turns off. I also tried to reset it and it did not help. Any suggestions?

Howdy mela1223,
If I understand correctly your iPod will not stay on unless you have the charger plugged in even after resetting it. Normally this would indicate a hardware issue that would need a repair but to cover all the bases before that, the last troubleshooting that can be done for it would be to restore it with iTunes on a computer.
Restoring iPod to factory settings - Apple Support
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
Thank you for using Apple Support Communities.
Take care,
Sterling

IPod Nano 6th gen won't sync with iTunes 12.1.1.4

iPod Nano 6th gen won't sync with iTunes 12.1.1.4.
This iPod was synced with another iTunes library. I had to transfer iTunes library from another laptop.
Launch iTunes (12.1.1.4), plug in Nano, Nano display says connected, Nano appears in iTunes, but when I attempt to navigate to Nano nothing occurs, or if I am able to navigate to Nano then I can't go any further and select music to sync and the Nano comes out of connected state. I have had to close iTunes, sometimes reboot laptop, but nothing I do appears to make any difference. It won't allow me to continue music selection process and start the sync process. Is there a way to simply reset the Nano and reconnect to get it to sync? I don't care about content as it needs to be resynced with this iteration of iTunes because it is currently associated with the other iTunes library.
Any suggestions would be appreciated.

What solved my problem:
I restored my iPod nano on my wife's PC, which had version 11 of iTunes. I was then able to sync it on my PC. Why didn't I restore it on my PC? See following details.
Additional details:
I first took the iPod to the local Apple Store, where the only course of action they could offer was to restore the iPod. So they did. When I got home, it wouldn't even connect to iTunes on my PC, which was a regression from the day before. Out of desperation I plugged it into my wife's PC, and her older version of iTunes immediately told me the iPod had been formatted on a Mac and it needed to be restored on a PC to be usable by a Windows machine. Why my newer version of iTunes couldn't tell me that is a mystery.

HT1459 My nano (6th gen.) sleep/wake button is frozen. What can I do?

My nano (6th gen.) sleep/wake button is frozen. What can I do? I have owned this less than a year

I had a broken home button within 6 months and had it replaced. Now I have a broken volume up button less than a year later. They want $65 to fix with 90 day warranty. This is a major defect and they should have recalled these units. It is insane that they are still ignoring this problem and telling people to pay to have it fixed. I'm filing a complaint against Apple.

Non Apple headphones with Ipod Nano - 6th gen

Hi All,
sorry for my silly question, but Im new in the AppleWorld. I have a brand new Apple Nano 6th gen and noticed that, if I use a regular (expensive!) headphones that I usually use while running, the sound is very disturbed and even the radio cannot play properly. Once I plug the apple headphone (the standard ones, sold with the ipod) everything turns back to normality..
Is it true?
Is there a chip in the device/headphone in order to work properly only with Apple/Apple's approved headphones?
Please, tell me it is just a joke..
/ar

Those type of headphones you mention are usully poor quality and realy are designed for phone use not high quality music listning plus they may be shorting the ipod or are incorrect impedance. If you use headphones for example a set designed with a high impedance the sound will be too low and will mostlikely distort as the small amp circut can't power them correctly.
I use a set of senheiser earbuds and they sound quite good no distortion at all I also tried my budies ultimate ears all sound fine no distortion.

My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

Read the PDF user manual for a possible solution: iPod Manuals and/or iPod Nano Support
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.
If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.

Yet another Nano 6th Gen with power button failure

Similar Messages

Maybe you are looking for