Yosemite - Unable to access desktop when Remote Desktop app is connected to an RDP session

Since updating to Yosemite, after connecting full screen to any server you cannot get back to desktop as it seems the RDP session takes over the primary desktop and scrolling further left on the trackpad takes you to the Yosemite dashboard and you cannot
get to the desktop.
This happens since the beta and is still an issue using the released version. When will this be fixed??

Hi,
Thank you for posting in Windows Server Forum.
Initially please update MRD MAC to v8.0.9. From description it seems that issue related to MAC side compatibility issue, so suggest you to contact apple customer care and clarify for further research.
Thanks for your understanding and Support!
Regards.
Dharmesh Solanki
TechNet Community Support

Similar Messages

Windows Components/remote desktop services/remote desktop session host/profile doesn't appear to be working on 2008R2 boxes

I have two domains.   One is an account domain with a one way trust with the resource domain.   Resource domain trusts the account domain and has a number of 2008R2 servers running within. I am experiencing severe logon delays
due to these servers being unable to access the server that hosts the user home folder specified directly on the user account profile tab from the account domain.   When using my workstation in the actual account domain (corporate) I have no
problems.
Because of these network restrictions, I need to override the 2008R2's desire to access that user home folder location in the account domain.
So far the best thing I have found to try is Windows Components/remote desktop services/remote desktop session host/profile/Set Remote Desktop User Home Directory
The problem is that so far I have tried to configure this to point to both a local folder as well as a network path and it doesn't appear to be doing anything.   Not seeing any errors in the app or system log either.
It is still trying to map the path in the account domain.
Any ideas?
Is there a better way to accomplish my goal?   The servers in the resource domain will be Citrix servers and there will be a lot of users connecting from the account domain.
I tried this setting too, but it only seems to work on the 2012 machines in my Resource domain.
With the introduction of Windows 8 and Windows Server 2012 there is now a new group policy setting called “Set user home folder” and is found under Computer Configuration > Policies > Administrative Templates > System > User Profiles
Help!

Hi,
This might be due to permission problems. Please check whether the user accounts for whose home folder to be redirected have permissions in the shared folder specified in the server.
Checkout the below link on Best Practice for creating Roaming Profile and Folder Redirection
http://www.grouppolicy.biz/2010/08/best-practice-roaming-profiles-and-folder-redirection-a-k-a-user-virtualization/
Regards,
Gopi
JiJi
Technologies

Remote Desktop - The Remote Desktop administrator software does not match the installed client software version.

Hi,
I just upgraded to Mavricks and get this when I try to launch Remote Desktop:
The Remote Desktop administrator software does not match the installed client software version.
I tried removing the application and reinstalling it to no avail. Any suggestions?
Thanks.
-David J. Eisen

Hi coold88!
I have an article for you that addresses your issue:
Remote Desktop 3: How to install Remote Desktop Administrator software after the client software has been updated
http://support.apple.com/kb/HT3596
You will want to make sure you have the latest version of the software as well:
About Apple Remote Desktop 3.7
http://support.apple.com/kb/HT5896
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Can iPhone remote start app be connected to general motors factory remote start

can iPhone remote start app be connected to general motors factory remote start

You can with onstar.
http://www.ehow.com/how_7686640_activate-remote-starter-cell-phone.html

Why, when I successfully connect to Server 2012 Essentials R2 via Anywhere Access does the Remote Desktop Connection use the self signed certificate for RDP instead of the SSL certificate I installed when I set up access anywhere?

Scenario:
Windows Server 2012 R2 Essentials
I purchased an SSL Cert from GoDaddy and I managed (after some challenges) to set up Anywhere access to use that new SSL Cert. I to rebooted the server and I am able to login to Anywhere Access vis https (using the SSL certificate) from PC, Mac and iOS.
So far so good.
The problem I am having is that when I click to launch a remote desktop connection to the server RDP connection wants to use the self signed SSL certificate of the server rather than the SSL Certificate I installed into Anywhere Access. As a result, I get
a security warning like this: "The identity of the remote computer cannot be verified. Do you want to connect anyway?"
The name in the certificate appears as ACME-SERVER.ACMEDOMAIN.local instead of the SSL Certificate I installed, which is
remote.acmedomain.com
If I lick to accept, RDP does work fine, it;s just using a self signed certificate. I want it to use the trusted certificate that I purchased and installed.
My guess is that there must be an additional step to tell Anywhere Access that when it generates the RDP session that it should use the cert? OR, is this just how it works?

Because....
the server does not have a 'trusted' certificate assigned to it.
Only the RDP Gateway has the trusted certificate for the external name.
If you want to remove that error, you have to do one of the following:
Make sure your domain uses a public top level domaim, and get a public trusted certificate for your server.
So, something like,
server.domain.publicdomain.com
Or,
Install that certificate on your remote computer so it is trusted.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Windows XP see blank screen when remote desktop to Windows 7 with fast user switching disabled

All computers are in workgroup environment, no AD.
Windows 7 pro are configured with fast user switching mode disabled so that only one login session can run at a time. When a Windows 7 machine remote desktop to another Windows 7 machine, the remote desktop 'server' will give 30 seconds count-down for the
console logged in user to accept remote connection, or when timeout expires it kicks out the console logged in user. This is completely ok.
This become a problem when a Windows XP rd client try to remote desktop to these Windows 7 machines, Windows XP see a blank screen if the remote Windows 7 machine has a user logged in, as it is waiting for the user to log off first. This is not desirable
as our administrators want the console session to be logged out automatically if they (administrators) want to remote desktop in.
Is this a configuration problem? Is this a OS design, can't be changed?
Valuable skills are not learned, learned skills aren't valuable.

Hi,
As I know, for RDP session in Windows 7, you don't need to configure the fast user switch option disabled. Windows 7 doesn’t support multiple Remote Desktop sessions by design, that means only one RDP session at a time.
I remote into my Windows 7 machine (which has a user logged in) from my XP machine, all work fine, the user logged in Windows 7 machine is automatically "kicked off".
May I ask a question? Does this issue happen in all XP machines? If you leave Windows 7 machine started and no user logged in, the RDP session in Windows XP established quickly?
I would suggest you keep latest drivers graphic card and latest updates paches for both Windows XP (Windows XP has come to its end of the lifecycle)and Windows 7.
Yolanda Zhu
TechNet Community Support

Unable to select Certificate for Remote Desktop Connection

Hi,
I have created a certificate with below parameter in inf file through a local Standalone 2008 r2 CA & imported it into Computer personal certificate store but unable to see this certificate entry while trying to select it under Remote desktop connection.
Somewhere saw we should have the private key in personal certificate store but didn't get how/where to get that key. Is that the reason, m unable to select this certificate or there is something missing in the input parameter used in inf file. Kindly suggest
what could be the problem.
[NewRequest]
Subject="CN=Server.Domain.com"
Exportable=TRUE
KeyLength=2048
KeySpec=1
KeyUsage=0xf0
MachineKeySet=TRUE
[EnhancedKeyUsageExtension]
OID=1.3.6.1.5.5.7.3.1
OID=1.3.6.1.5.5.7.3.2
OID=1.3.6.1.4.1.311.54.1.2
Regards,
Dhiraj

Hi,
Problem is resolved now. i have done below two changes.
--> used KeyUsage=0xA0 in inf file.
--> imported certificate through certreq -accept. Earlier i was importing cert from mmc.
I think second point resolved my problem. i even didn't think that mmc & command can make this difference.
Dhiraj

Unable to access Adobe Story both desktop and online version

Hello,
i'm not able to sign into Adobe Story both desktop version - first it gave me this error -
There was an error with this action. Try again later.
18f1dd3c-30ae-46af-8fe7-832981787bdb
now when i try to sign in it just hangs on "processing" splash page
when i try to log into online version - tried Chrome, Firefox and IE10, it doesn't seen to be able to connect to the server:
Adobe Story app that i'm using is a part of Creative Cloud CS6, all other applications work fine, all latest updates installed.
Story updated itself today when i opened it first, before today i didn't have any issues accessing either online or desktop version.
If the issue is on Adobe server side, any idea when it will be resolved?
Windows 7 x64, SP1
Creative Cloud CS6
thank you,
-Katya

thank you! thank you! thank you! thank you! thank you! thank you! thank you! thank you! thank you! thank you! thank you! thank you! thank you!
Spencer

Using OS10.6 and headed to OS10.8, on two computers (home and remote), but does it make a difference when "Remote Desktop" gets installed?

The question describs the question.

varjak paw,
Thanks for the insight. Sorry for the delayed response, I have not been on the computer since 17Mar13,
Background -- The tech specs for ARD3 at "http://www.apple.com/remotedesktop/specs.html" states "The administration and client system for Apple Remote Desktop 3 is designed to run on any computer running Mac OS X v10.4.11, Mac OS X v10.5.7 or later." So, I interpreted this as it would run on any of these systems, hence my question. I was trying to understand if there might be any conflicts if I installed it while both computers were at 10.6.8 (for the question I rounded to 10.7), if it made any difference if the OS differed on the two computers, and then updated AED after upgrade to 10.8. The extra background is that the two computers are 400 miles apart, hence the desire to use ARD. It is good to know that if ARD3 really will not run on the older systems, then I would not be able to purchase it (I'll probably take these steps tomorrow).

Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet. We also use Juniper NCP client to access our system remote. A VPN connection is created, but I am unable to access servers on our network. This works on iPhone 4.

Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet. We also use Juniper NCP client to access our local system from a remote location. A VPN connection is created, but I am unable to access servers in our network. This same functionality works using my colleagues iPhone 4.
Both phones are running iOS 6.1.3. I tried to reset network settings, but still unable to ping servers in our network. This is a feature that our sales team relies heavily on when out of the office. Hoping someone has some suggestions on what is different between the 2 phones.

Hi,
Generally, this issue should be related with something called split tunneling, since you’re using a F5 vpn client, you need to look for something related to split tunneling in the F5 VPN client's documentations.
Here is an example, share it with you as a reference.
http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_config_10_2_0/apm_config_networkaccess.html
In addition, you can refer to the link below for more solution about this problem.
You Cannot Connect to the Internet After You Connect to a VPN Server
http://support.microsoft.com/kb/317025
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

VPN connects but unable to access resources on remote network

HI,
I'm able to ping the ASA interface once the VPN is connected but unable to access any of the resources located on the remote network such as shares and computers. The cisco vpn client shows data being sent and recieved when I ping the interface on the ASA but it doesn't recieve any data when I attempt to ping or access other resources on the network.
ASA Version 8.2(5)
hostname HOST_NAME
domain-name default.domain.invalid
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 10
duplex half
interface Ethernet0/4
speed 100
duplex full
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.8.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 12.x.x.x x.x.x.x
boot system disk0:/asa825-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 10.10.8.2
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Vipre tcp
port-object range 18082 18082
port-object range 18086 18086
object-group network town
network-object 192.168.0.0 255.255.0.0
access-list outside_20_cryptomap extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list new extended permit ip host 192.168.0.1 any
access-list new extended permit ip any host 192.168.0.1
access-list outside_20_cryptomap_1 extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list townoffice_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list townremote_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list outside_access_in extended permit tcp any interface outside object-group Vipre
access-list outside_access_in extended permit tcp any object-group Vipre interface inside object-group Vipre
access-list outside_access_in extended permit tcp any eq 3389 10.10.8.0 255.255.255.0 eq 3389
access-list test extended permit ip host 192.168.0.6 host 10.10.8.155
access-list test extended permit ip host 10.10.8.155 host 192.168.0.6
access-list test extended permit ip host 10.10.8.2 host 192.168.3.116
access-list test extended permit ip host 192.168.3.116 host 10.10.8.2
access-list test extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit tcp 192.168.0.0 255.255.0.0 10.10.8.0 255.255.255.0
access-list bypass extended permit tcp 10.10.8.0 255.255.255.0 192.168.0.0 255.255.0.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn 10.10.8.125-10.10.8.149 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.0.0
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 18082 10.10.8.2 18082 netmask 255.255.255.255
static (inside,outside) tcp interface 18086 10.10.8.2 18086 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 10.10.8.2 3389 netmask 255.255.255.255
static (inside,inside) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside,inside) 10.10.8.0 10.10.8.0 netmask 255.255.255.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.70.119.65 1
route inside 192.168.0.0 255.255.0.0 10.10.8.250 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http outside
http outside
http inside
http outside
http inside
http outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp inside
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto map outside_map 20 match address outside_20_cryptomap_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 69.87.150.118
crypto map outside_map 20 set transform-set ESP-3DES-SHA ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 30
telnet 10.10.8.0 255.255.255.0 inside
telnet timeout 5
ssh 63.161.207.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
dhcpd dns 10.8.8.2
dhcpd address 10.10.8.150-10.10.8.200 inside
dhcpd dns 10.10.8.2 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy aaa internal
group-policy aaa attributes
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
default-domain value domainname
group-policy bbb internal
group-policy bbb attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelall
split-tunnel-network-list value townoffice_splitTunnelAcl
default-domain value domainname.local
group-policy townremote internal
group-policy townremote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value domainanme
group-policy remote internal
group-policy remote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value dksecurity.local
address-pools value vpn
username xxxx password . encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxxx password . encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
tunnel-group 69.87.150.118 type ipsec-l2l
tunnel-group 69.87.150.118 ipsec-attributes
pre-shared-key *****
tunnel-group remote type remote-access
tunnel-group remote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group townremote ipsec-attributes
pre-shared-key *****
isakmp keepalive disable
tunnel-group townremote type remote-access
tunnel-group townremote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group lansingremote ipsec-attributes
pre-shared-key *****
class-map tcp-bypass
match access-list bypass
class-map test
match access-list new
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
no dns-guard
no protocol-enforcement
no nat-rewrite
policy-map global_policy
class test
class inspection_default
policy-map tcp
class tcp-bypass
set connection random-sequence-number disable
set connection advanced-options tcp-state-bypass
service-policy global_policy global
service-policy tcp interface inside
prompt hostname context
call-home reporting anonymous prompt 2
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c724d6744097760d94a7dcc79c39568a
: end

You need to change the VPN pool ip subnet to something other than the same ip range used on the inside interface.
Sent from Cisco Technical Support iPad App

Remote Desktop: Apple Remote Desktop NOT showing in the Sharing Area

I have installed the latest Apple Remote Desktop to both my Admin and client computer. In Preferences>Sharing Apple Remote Desktop does NOT show up as a choice to be clicked. Is there something that I have missed?

I have installed the latest Apple Remote Desktop to both my Admin and client computer. In Preferences>Sharing Apple Remote Desktop does NOT show up as a choice to be clicked. Is there something that I have missed?

Minimal requirements for remote client app to call a EJB 3 session bean

I'm just starting to get into EJBs, trying to learn the EJB 3 APIs. I kind of understand the setup on the server side to create a session bean. What I don't understand is what I would have to deploy for each of the remote client app (Swing-based GUI or something like that) installations. Of course, the client app code would have to be deployed to each client desktop, but what stuff related to the session bean? Just the session bean interface class?
For ease of discussion, let's say my bean is CalculatorBean, having two interfaces, CalculatorRemoteIface and CalculatorLocalIface. Let's also say my client app, CalculatorUI, is a simple Swing-based GUI that grabs a reference to a CalculatorBean.
Other than just the Swing-based classes and the JRE, what JARs/classes will I want to deploy to each desktop?
(Please assume the latest Sun Java System App Server 9 and Java EE 5, if you are familiar with them.)

Personally- I would deploy your backend
in EJB 3.0, but then expose it as a web service. It
is MUCH easier for your clients to connect to a web
service (and mantain that code), then to have them
connect via RMI/JNDI.Oh, I would say it's quite the opposite. RMI/JNDI is MUCH easier from a client point of view than web services. To make web services work easy from the client side you have to generate code and the tools that generate code from a web services wsdl file doesn't do a great job today. But that was not the question. But take some time reading this article about webservices...it's quite funny and spot on: http://wanderingbarque.com/nonintersecting/2006/11/15/the-s-stands-for-simple
Now to your question, yes you will need the remote interface on the client side.
/klejs

Access denied when using Desktop-API

Hi to all,
I have a client app that is launched using JWS. In my JNLP file I declared:
<security>
     <j2ee-application-client-permissions/>
</security>
and all jar-files are signed with the same certificate. This is working fine, but when I try to use the Desktop-API to open a folder on clients machine
Desktop.getDesktop().open(new File("/path/to/dir"));
it gives me
java.security.AccessControlException: access denied (java.io.FilePermission <<ALL FILES>> execute)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.awt.Desktop.checkExec(Unknown Source)
     at java.awt.Desktop.open(Unknown Source)
I even tried with
<security>
     <all-permissions/>
</security>
in JNLP. But it gives me the same Exception. I also tried to use a PrivilegedAction to make SecurityManager not check permissions, but it didn't help. At last thought about having my own policy-file. But I don't know how to tell the JWS app to use it.
Thanks for help in advance
Christian

Hi to all,
Deleting the cache works fine. But only for one start.
I found the JNLP in the cache has been automatically updated with the line
<update check="timeout" policy="always"/>
I thought this could be the problem, because if may be the SecurityManager finds JNLP in the cache being different from that one on the server, it "thinks" it has been hacked?
To avoid this difference, I added the line right from the beginning, but that didn't help.
BTW I signed all my jars, but the JNLP-File is just provided in the working dir of the app unsigned. Somewhere I read about JNLP-Files also signed. May be I have to sign it, too, or is it possible to have it packed in my application jar (then it will be signed with it)?
Thank for any hints
Christian

Remote access without Apple Remote Desktop

I want to remotely access an i-Mac, at work (which is on a network) from home using a Mac Pro (ISP - Comcast). I was able to use my Mac Pro to access a PC on this same network using a Windows remote access program which was downloaded/free. I've now switched to an i-Mac at work.
I would rather not spend $300 to accomplish this. Is there another way using either free or less expensive software to access my workplace i-Mac?
I do have a copy of Parallels Desktop 4.0 for Mac if I need to run Windows programs on either the Mac Pro or i-Mac.

Dave, Thanks for the information. We'll give it a try. We have a IT guy here at work, as needed. However, he's not familiar with Macs and uses exclusively PCs. He may not be as much help as I would like in solving this problem. If "Push comes to shove," I could probably remotely log onto a PC which isn't in my workspace . . . one of the "community" ones. That would solve the issue with the scheduling software, at least. (Which is, of course, PC based.)
That would leave my personal Word and Excel files on my i-Mac for the screen sharing feature of Mac OS X 10.6.

Yosemite - Unable to access desktop when Remote Desktop app is connected to an RDP session

Similar Messages

Maybe you are looking for