You are unable create reports on this type of universe

I Created a BW query in Bex Query Designer.By using that Query I created a Universe in Universe Designer. I Exported the universe with Everyone Acess rights.Now, I tried to build a report on this Universe using Desktop Intelligence.When I tried to acess the Universe it is giving the error " you are not authorized to create reports on this type of universe".
So,Please resolve this problem anyone .

Hi,
Desktop Intelligence does not support OLAP universes. You should use Web Intelligence to build reports on your universe. Or Crystal Reports but in this case you have to use the BW MDX driver directly.
Regards,
Stratos

Similar Messages

You are unable to log in to the user account at this time

I am facing this problem for some time now. Can anyone give some hints?
By the way. Excuse me for my English. I am not a native speaker.
I have a MacMini with Snow Leopard Server (10.6.7 since yesterday) wired to two iMacs (10.6.7), two PC's running Windows and a Time Capsule/Airport (7.5.2) which is wirelessly connected to a MacBook Air (10.6.7), iPad and iPhone.
The PC's use file sharing (SMB) which works fine.
The Server has some network accounts. Home dir is on the server.
At one iMac, I can log in to a network account. E-mail, iCal on Server, sync with iPad and iPhone. Works fine.
At the second iMac, I can NOT log in to any network account. Window shakes, saying "You are unable to log in to the user account at this time" and "Logging in to the account failed because an error occurred". In Terminal window, I can reach /Network/Servers/do.main.name/Users. Using the Finder, I can access all my files. If I shut down the first iMac, I can log in.
At my MacBook, I can not log in to my network account. In Terminal window, I can Not reach /Network/Servers/do.main.name/Users. I get "Users: Host is down". But using Finder, I have access to all my files. Shutting down both iMacs doesn't help. Airport settings see to be correct.
Where do I have to look. On the Server side? Using Server Admin and Workgroup Manager (from any client) I can not see anything strange. In WGM, multiple login for the network accounts is enabled. I even have Guest Access enabled for AFP (both in the sharepoint and in AFP settings).
Anyone?
Gr. Barend

Solved.
see: http://discussions.apple.com/thread.jspa?messageID=13288063&#13288063
Gr. Barend

Can not log into server computer with any accounts - "You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."

I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
ACL found but not expected on Users
Repaired "Users"
ACL found but not expected on Users/.localized
Repaired "Users/.localized"
ACL found but not expected on Users/Shared
Repaired "Users/shared"
ACL found but not expected on Users/Shared/.localized
Repaired "Users/Shared/.localized"
Permissions repair complete.
But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?

Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.

HT3231 why do all these pages not tell you where migration assistant is on a mac pro. they all say what to do when you have it however this is of no use if you are unable to find.

why do all these pages not tell you where migration assistant is on a mac pro. They all say what to do when it is on however this is of no use if you are unable to find it in the first place.

In the Utilities folder, which is in Applications. You could also use Spotlight to search for it.
Matt

You are unable to log in to the File Vault user account "myaccount "...

I know there are various posts already out there on remedies for recovering your data stored on a FileVault account when you receive the following message at the login screen; *"You are unable to log in to the File Vault user account "myaccount " at this time"*, but this genuinely worked for me despite AppleCare providing absolutely no assistance whatsoever. In fact, if I had followed their advise I'd be inconsolable right now having wiped my MacBook Pro and contemplating the prospect of rewriting my two essays due in 3 days time!
I, in a moment of shear stupidity, decided to move the sparsebundle file in my one and only account to trash. Thinking nothing of my foolish actions I shut down for the evening without a care in the world. The next day I started up my computer as usual, and as usual I was prompted at the login screen for my password. I entered the correct password, but was alarmed to see the message above flash before my eyes. Without boring you all with what I did over the weekend waiting for AppleCare to open again on Monday morning. Anyway, this post is specifically for people who have put the sparsebundle of their FileVault-enabled account in the trash (NOT anything else!) without emptying it, of course! The other prerequisite is that you must REMEMBER YOUR FILEVAULT ACCOUNT PASSWORD!
1. Firstly, you must insert *Disc 1 of the Mac OS X Install* discs.
2. Restart your computer holding down the letter S (make sure you are holding this down BEFORE the start up noise sounds)
3. Select the appropriate language and continue to the next screen (DO NOT go past the next screen, the WELCOME screen)
4. At the grey bar at the top, under Utilities, select *Reset Password*
5. Select the Administrator/Root account and proceed to change the password of this account to test
6. Confirm the password by reentering it and click Save
7. Restart your computer and at the login screen you should now be able to select an account named Other
8. The username for this account is root and the password is test (the password you entered earlier)
9. Using Finder, locate the Terminal utility, which can be found in *Applications --> Utilities*
10. Enter the following, ignoring the bold of course (pay attention to lower cases AND spaces!): *defaults write com.apple.finder AppleShowAllFiles TRUE*
11. Hit Enter
12. On the next line, enter: *killall Finder*
13. Hit Enter again
14. Type: exit on the next line and close Terminal
15. This has enabled the hidden files on your computer to be visible
16. You then need to locate the sparsebundle file in the trash of your usual account folder (it could be 501, so search for that too) whilst logged in to the administrator account
17. Once you have found it, click *Go to Folder* under Go in the grey bar and type /Users/
18. Create a *new folder* at this location with a new username
19. Move the sparsebundle from its present location to the folder you have just created
20. Click Get Info on the new folder, and at the very bottom click *Apply to enclosed items*
21. In *System Preferences --> Accounts*, create a new user with EXACTLY the same name as the folder you created (eg. Folder name = burtreynolds, new user = burtreynolds)
22. A window should appear if you have done the above correctly stating *A folder in Users folder already has same name, would you like to use it?*
22. Click OK
23. Click *Show All* at the top of the Accounts window
24. Restart your system and log in to the new account you have created
25. The sparsebundle should now be visible
26. Double-click on the sparsebundle, it will prompt you to enter a password
27. Enter the password of your former account (if you have genuinely forgotten this password, I honestly can't help any further at this point)
28. If the password is correct, the sparsebundle will automatically mount and you will have access to all the files
29. NEVER EVER USE FILEVAULT AGAIN AND BACK UP ALL DATA YOU DON'T WANT TO LOSE!!!
The above worked for me, and to say I'm mildly annoyed with AppleCare is, well, putting it mildly really!

I know there are various posts already out there on remedies for recovering your data stored on a FileVault account when you receive the following message at the login screen; *"You are unable to log in to the File Vault user account "myaccount " at this time"*, but this genuinely worked for me despite AppleCare providing absolutely no assistance whatsoever. In fact, if I had followed their advise I'd be inconsolable right now having wiped my MacBook Pro and contemplating the prospect of rewriting my two essays due in 3 days time!
I, in a moment of shear stupidity, decided to move the sparsebundle file in my one and only account to trash. Thinking nothing of my foolish actions I shut down for the evening without a care in the world. The next day I started up my computer as usual, and as usual I was prompted at the login screen for my password. I entered the correct password, but was alarmed to see the message above flash before my eyes. Without boring you all with what I did over the weekend waiting for AppleCare to open again on Monday morning. Anyway, this post is specifically for people who have put the sparsebundle of their FileVault-enabled account in the trash (NOT anything else!) without emptying it, of course! The other prerequisite is that you must REMEMBER YOUR FILEVAULT ACCOUNT PASSWORD!
1. Firstly, you must insert *Disc 1 of the Mac OS X Install* discs.
2. Restart your computer holding down the letter S (make sure you are holding this down BEFORE the start up noise sounds)
3. Select the appropriate language and continue to the next screen (DO NOT go past the next screen, the WELCOME screen)
4. At the grey bar at the top, under Utilities, select *Reset Password*
5. Select the Administrator/Root account and proceed to change the password of this account to test
6. Confirm the password by reentering it and click Save
7. Restart your computer and at the login screen you should now be able to select an account named Other
8. The username for this account is root and the password is test (the password you entered earlier)
9. Using Finder, locate the Terminal utility, which can be found in *Applications --> Utilities*
10. Enter the following, ignoring the bold of course (pay attention to lower cases AND spaces!): *defaults write com.apple.finder AppleShowAllFiles TRUE*
11. Hit Enter
12. On the next line, enter: *killall Finder*
13. Hit Enter again
14. Type: exit on the next line and close Terminal
15. This has enabled the hidden files on your computer to be visible
16. You then need to locate the sparsebundle file in the trash of your usual account folder (it could be 501, so search for that too) whilst logged in to the administrator account
17. Once you have found it, click *Go to Folder* under Go in the grey bar and type /Users/
18. Create a *new folder* at this location with a new username
19. Move the sparsebundle from its present location to the folder you have just created
20. Click Get Info on the new folder, and at the very bottom click *Apply to enclosed items*
21. In *System Preferences --> Accounts*, create a new user with EXACTLY the same name as the folder you created (eg. Folder name = burtreynolds, new user = burtreynolds)
22. A window should appear if you have done the above correctly stating *A folder in Users folder already has same name, would you like to use it?*
22. Click OK
23. Click *Show All* at the top of the Accounts window
24. Restart your system and log in to the new account you have created
25. The sparsebundle should now be visible
26. Double-click on the sparsebundle, it will prompt you to enter a password
27. Enter the password of your former account (if you have genuinely forgotten this password, I honestly can't help any further at this point)
28. If the password is correct, the sparsebundle will automatically mount and you will have access to all the files
29. NEVER EVER USE FILEVAULT AGAIN AND BACK UP ALL DATA YOU DON'T WANT TO LOSE!!!
The above worked for me, and to say I'm mildly annoyed with AppleCare is, well, putting it mildly really!

You are unable to log in...; Network Home directories; 10.4 & 10.5 Servers

I have a solution!
Note: this is a new post because all previous posts dealing with this topic have been archived, MANY without an answer.
Problem:
Users with Network Home directories can't log in. After entering their correct username and password, the following error message appears:
"You are unable to login to the user account 'username' at this time. Logging in to the account failed because an error occurred."
Problem occurs with v10.5 Leopard client attempting to login to a Network Home directory hosted on a v10.4 Tiger server.
_Significant Troubleshooting Symptom:_
Client mac Console log (all Messages) contains the following entry at the time the user attempted to login to their Network Home directory:
authorizationhost[509] ERROR | -[HomeDirMounter
mountNetworkHomeWithURL:attributes:dir:Path:username:] |
PremountHomeDirectoryWith Authentication( url=afp://server.example.com/Homes, homedir=
/Network/Servers/server.example.com/Volumes/ServerHardDisk/Homes/username,
name=username )
returned 2
_Computing/Network Environment:_
v10.5 Leopard server doing: DNS; Open Directory with Kerberos for Single Sign-On; AFP for half of all users' Network Home directories.
v10.4 Tiger server doing: AFP for the other half of the Network Home directories. Also, note that Open Directory is not running on this server, BUT IT IS CONFIGURED (using Server Admin) as "Connected to a Directory System" and has joined the Kerberos realm on the v10.5 Leopard server.
v10.5 Leopard clients.
Solution:
v10.5 User Management manual
http://manuals.info.apple.com/enUS/User_Managementv10.5.pdf
says share points for Network Home directories have to have Guest Access ENABLED. See step 5 on page 117 and step 12 on page 118. Note that these are two different settings, but seem consistent with each other.
I had followed/complied/set Guest Access according to steps 5 (page 117) and 12 (page 118) on BOTH the v10.5 Leopard AND the v10.4 Tiger servers. The solution that allows users to log on normally is:
Uncheck/disable Guest Access (as set in step 12 page 118) for the v10.4 Leopard server only. Leave "Share this item using AFP" checked. Uncheck "Allow AFP guest access."
The above worked for me. Your milage may vary. If anyone knows how to report this to Apple for fixing in the server software and/or clarification in User Management manual, please do. If anyone knows that this solution "breaks" other stuff, please post back.

Other posts that dealt with this same issue and other potential solutions:
http://discussions.apple.com/thread.jspa?messageID=5700241&#5700241
http://discussions.apple.com/thread.jspa?messageID=5784186&#5784186
http://discussions.apple.com/thread.jspa?threadID=1215039&start=0&tstart=0
http://discussions.apple.com/thread.jspa?messageID=9204496&#9204496
http://discussions.apple.com/thread.jspa?threadID=1522353&start=0&tstart=0
http://discussions.apple.com/thread.jspa?messageID=10226660&#10226660

You are not authorized to execute this application in SAP E-Recruit

Hi,
We are getting the below error while going to recruitment page for recruiter:
"You are not authorized to execute this application"
At the same time when we check in SLG1, we get the below errors:
No candidate could be found for US E0023127
The error occurred in program CL_HRRCF_CANDIDATE============CM003 line 361
Apart from this we are not getting any dumps/traces in ST22/ST05/ST01.
When we encountered this error for the first time, we executed the report RCF_CREATE_USER in SE38 and the problem was resolved.
We got the error again 2 days back, after that also it got automatically resolved. But, now we are getting this error continuously.
We also tried re-executing the report RCF_CREATE_USER and HRALXSYNC but no use.
The service user (for recruiter) is a reference user from RCF_CAND_INT.
We have also tried giving different roles and authorizations to the user.
SAP_ERC_RECRUITER_CI_4
SAP_RCF_RECRUITER
SAP_ERC_REC_ADMIN_CI_4
SAP_ALL
We are in ECC 6 EHP 6 and we have a standalone EREC system with ERECRUIT 617 SP3.
We are stuck at this point in our EREC project.
Kindly provide your valuable suggestions for this issue.
Thanks in advance!
Regards,
Khushboo

Hello Khushboo,
the message you are getting is a bit misleading as it is the standard behavior of the quick search if the user you are logged in as recruiter does not have a candidate assigned. So the message in SLG1 points into the correct direction.
I am not sure what you are meaning by "the service user (for recruiter)". Although table T77RCF_ROLE allows to specify a reference user for all roles in eRec only the entries for internal and external candidates are actually used. So the authorization assignment for the recruiter specific roles has always to be done directy for each user. A reference user could be overwritten / reset to RCF_CAND_INT by the ALE.
What bothers me a bit is the user name and that you mention RCF_CREATE_USER and HRALXSYNC at the same time. This might be the reason for your issue. Looks like you created a candidate for a user using RCF_CREATE_USER which is later transferred in the ALE from HR Core to eRec. This was not a good idea. RCF_CREATE_USER is only for creating project users when the HR core to eRec and for special users who need a candidate while do not have an employee id in HR core (e.g. WF-BATCH). This is why I always recommend to use non-production user Ids for everyone during project phase. Its been quite a time some of my projects did otherwise and I remember a similar issue with one of the customer admins. Everytime data for the user / employee was send in ALE the candidate / user was messed up.
Getting this fixed was quite troublesome. In the end we had to dump the original candidate. We deleted all records between candidate object, central person, business partner and person object in HRP1001. By that time the customer was still on the old ALE version so today I would also delete all entries in HRP558X infotype tables for the employee. Then I would first try to finger the employee id (e.g. change the name, save, directly change it back, save again ) so it is transferred during the nightly processing of the change pointers and put in the IDoc. If this is not working I would try to transfer it again using PFAL.
Kind Regards
Roman

[HP Expert Day] "You are not able to restore this system with the media"

Welcome to HP Experts day!
I've got a long-standing problem since last year. Let's see if you can solve this!
I'll get straight to the point :
I am unable to perform recovery on my system. This is the error message :
It's a USB recovery media created with the HP recovery media utility on the same laptop. Tested to work correctly before I sent it for RMA on my SSD. It initially was running on a micron SSD. When I got it back, it was a samsung SSD instead, according to some benchmark results.
Laptop : HP Envy Spectre XT 13-2018TU
P.S I've already opened another thread on this last year.
http://h30434.www3.hp.com/t5/Notebook-Recovery/Unable-to-boot-from-USB-recovery-media/m-p/2197929#M1...
But they were stumped.

I had this exact same issue on a Spectre XT Pro Ultrabook.
The original SSD failed and I was sent a replacement, was fortunate enough to be able to create a Recovery USB stick using the wizard in Windows. When booting from USB I received the message "You are not able to restore this system with the media".
SOLUTION: You must NOT use the Recovery USB stick in any USB3.0 port (labelled SS). Using another USB port prevented this exact error message from appearing and I was able to complete the system restore process.
I hope this helps someone, I signed up and posted here especially for this reason!

How do I resolve: You are not permitted to open this document. It may be assigned to another user."

I am the only user on a computer, and have ordered two codes on line, and used them for a long time. Recently redid hard drive, and now I cannot open those two files only. I get the message: "You are nbot permitted to open this document. It may be assigned to another user." I am the only user, and maybe the name of the computer is different. How can I resolve this by accessing what permission and what user it is talking about.
Thanks to anyone who may be able to assist.
Gary

Thanks for your answer, however the user currently have the next configuration to sales documents flow:
Sales - A/R     Various Authorizations
Sales Quotation     Read-Only
Sales Order     Read-Only
Purchase Order Confirmation     Read-Only
Delivery     Read-Only
Return     Full Authorization
A/R Down Payment Invoice     Full Authorization
A/R Invoice     Full Authorization
A/R Invoice + Payment     Full Authorization
A/R Credit Memo     Full Authorization
A/R Reserve Invoice     Full Authorization
Document Generation Wizard     Full Authorization
Document Draft     Read-Only
Document Printing     Full Authorization
Dunning Wizard     No Authorization
Execute a dunning run     No Authorization
Sales Reports     Full Authorization
Sales Analysis     Full Authorization
Backorder Report - Selection Criteria     Full Authorization
Checking the configuration, this user can create for example AR invoices, but could not see previous records and neither the created by him. Using the Open Item list, the user can see the documents but can not open it. In the other hand the system has not activated the data onwership function.
Regards,
Manuel

You are not registered to use this service

We have everything with BT including a new TV box with netflix etc, which is currently at the end of the 14 day cooling off period. If the following problem isn't resolved today I will be considering cancelling the TV contract and leaving BT all together.
Our phone was working ok on the 15/4/2015. I tried to dial a local number last night (16/4/2015) to hear 'you are not registered to use this service please contact your service provider'. I dialled again with the area code, same thing. Also with national and mobile calls. We can receive incoming calls. I rang the Indian call centre who said there is no problem with the line or the account (which is in credit) it must be the handset. I am waiting for them to ring me back but having searched the problem online I think this will be to no avail. I have read about prefixing phone numbers with 1280 and this has worked when trying to ring my own mobile, so it can't be a problem with the handset, can it?
I've seen it could be a problem with Indirect Access IDA being removed from my account (no idea how this might happen). I also know that there was a major outage last week (around 6/4/2015) in our area which led to the freeview HD channels not being available. I had to reset our router which cleared the problem but were Openreach in our area doing something to the exchange boxes etc?
I need this problem sorting out A.S.A.P. please.

The fact that if you use 1280 it allows successful calls suggests your line is set as CPS , carrier pre select, if this has just happened it suggests a CPS provider has taken your 'line' for calls if not for line rental, but it's not properly set up otherwise calls would terminate it would just be billed by the mystery CPS provider
Have you had any approach by company's that sell this product ?, sometimes ISP's who's product includes calls can use CPS, if not, and you haven't been 'slammed' you need BT to set your line as non CPS , so BT handle your calls automatically without using 1280
This should be easy to get done, but the drones that answer the calls probably won't have a clue, hence the 'it must be your handset' nonsense they come up with, report the line faulty,don't accept an appointment, and insist they sent the problem to what was once called BT Operate, they look after the telephone exchange equipment and it's 'data',

CProjects - DMS integration:26 036 You are not authorized for with doc.type

Hi Experts,
I need to use cProjects integration with DMS. When I try to create a link to an existing document I find the following error:
26 036 You are not authorized for with document type DRW
My user has authorization to the doc type in the DMS system (linked by RFC to cProjects system). I also have defined the object link in the document type.
Do you know which configuration may be missing?
Thanks in advance!
Neil

Hi Niel,
How is the RFC connection established between DMS and cProjects system? Do check the authorizations of the RFC user through which the connection is established.
Regards,
Vivek Pandey

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
dscl . read /Users/<username>
(where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
(where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking.

You are unable to log in.

Hello everyone. This is my first post and alas it has to be about firevault error.
I recently bought my new macbook pro and i used the migration assistant to transfer all my data from my old macbook which runs on leopard.
Everything seems fine until I try to log in. I use the correct passwords and I get the "You are unable to log in to the FireVault useraccount <USERNAME> at this time. I even use my master password to "reset" my login and when i choose new password and verify it, give a new hint and then I try to log in, i get a shaky screen. No explanation given.
I went to the disk ulity (booting via dvd) to repaid disk, did that nothing out of order...
Thank you everyone in advance

http://superuser.com/questions/57452/macbook-migration-assistant-and-filevault
http://discussions.apple.com/thread.jspa?messageID=11616539&#11616539

Trying to open Terminal I get;You are not authorised to run this application. The administrator has set your shell to an illegal value.

Hi There Y'all,
I have recently downloaded MacKeeper. It ran OK for a bit, but has recently stopped allowing Internet security updates and switching on of the internet protection options.
Asked for help at MacKeeper. Their initial advice did not work, so a very nice technician was going to remotely attempt to fix the issue.
He however needed/still needs access to Terminal, a to me unbeknown Utility feature of my MacBook pro with Mac OS X 10.6.8.
While attempting to open Terminal the following came up
You are not authorised to run this application.
The administrator has set your shell to an illegal value.
Did do a diskverify permission and repair and restart.
Did check my admin settings in advanced options and have the /bin/bash.
Any advice anyone.
Thanks.
in site out

After finally localing private/etc/shells through Go>Go to folder and replacing the empty shells with the shells~orig I have permission again to open Terminal. Thanks. Another step.
(Why though can't I access /private/etc/... through Finder's search?)
Should work but the file or folder needs to exists to access it. If you typed in /private/etc/shells and the file wasn't there there's no place to access. Certainly /private/etc was there so that would have worked.
So what will happen by inputting the lines
ls -Fvl /bin/bash
ls -Fvl /etc/shells
more /etc/shells
into Terminal?
Basically to find out what you already seemed to find out. The first command was to display owner, group, and permissions of /bin/bash and to tell me whether it still existed.
Similarly for /etc/shells.
And the last command would have just displayed what was in /etc/shells.
By the way /private/etc and /etc are the same folder.

Com.sap.aii.adapter.file.ftp.FTPEx: 550 You are not allowed to issue this

hi All,
We are getting below error while connecting to an FTP location through File Adapter:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server XYZ. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 You are not allowed to issue this command'. For details, contact your FTP server vendor.
Also when we tried to connect to this FTP location through PI server we able to connect, but when we connect to it through channel we are getting above error.
Please Help!
Thanks,
Mayank

hi All,
The usedid we are using to connect to FTP location has appropriate access to write(we have an receiver file adapter) the files, when we connected to FTP location from PI server using same useid(as used in channel) we are able to connect to FTP location and also able to write the file there.
Now error soming is:
An error occurred while connecting to the FTP server XYZ. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Operation is not supported under Connect:Enterprise FTP server.'. For details, contact your FTP server vendor.
Thanks,
Mayank

You are unable create reports on this type of universe

Similar Messages

Maybe you are looking for