Your search did not produce any results

Hi,
I'm publishing my iWeb site to my ME.COM account.
I have the site password protected as offered in iWeb.
But when the site is password protected the search with the iWeb search field does not provide any results.
Only the message:
"Your search did not produce any results."
If I disable the password protection for the site in iWeb and republish, the search provides the expected results.
Any idea what's wrong?
Thanks and Regards,
JO

Sorry, didn't test enough.
After publishing a few new blog entries under the password protected site, I tested the search again and it does not return any results.
It was working for a short time when I republished unprotected and then again protected.
Now that I added block entries under the protected site mode, search is brogen, again.
Any Help?
Thanks and Regards,
JO

Similar Messages

IWeb Error: "Your search did not produce any results."

I just updated my iWeb and added the new search and comment features to my iWeb site. I am happy to see these features added but the search feature gives me a page displaying "Your search did not produce any results." Does anyone else have this issue? I am using my .Mac account and did a "Publish all to .Mac" to see if that would help. Comments work great. Can anyone help? Not good to have a feature that does not work.
Cheers!
Patrick

I am having the same problem and can probably give you an answer as to why the search feature is not working...
Look carefully and you may notice that by re-publishing your site with 1.1, iWeb has converted all text on your site to image files (probably .png). This is what happened when I re-published.
Therefore, there is technically no text to "search" through...
No fix as of yet... I will ttry to republish yet again tonight

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

cm:search is not returning any result when logical operator '!' is used.

<cm:search is not returning any result when logical operator '!' is used.
I am using BEA 9.1 content management services API. When I run the following query I am not receiving any results. Also no error or exceptions are seen in the weblogic or cmspi log.
The query is <cm:search id="docs" query="!(object_name like 'Sport*')" />

HI cam
Thanks for your reply, but i found the problem it was because my server administrator password has changed by network guys... and because of it crawler unable to access the content
I wrote my solution here i hope it will help other people
http://bvs-sharepoint.blogspot.com/2015/03/sharepoint-search-is-not-returning.html
RB

I lost my password and i could get into my phone, i tried but it said connect to itune. i did, but i did not get any result. please give me some advises how do i get my password back or reset with a new one?

Ipjone6, silver, 64GB
I lost my password and i could get into my phone, i tried but it said connect to itune. i did, but i did not get any result. please give me some advises how do i get my password back or reset with a new one?

how to reset password:
https://iforgot.apple.com/password/verify/appleid

"Cannot evaluate parameter 'NewName' because its argument input did not produce any output." error received

I need to rename a set of files with a subset of the files' original name. I wrote this script:
dir | rename-item -newname {if ($_.name -match '\d{4,5}\-\d{5}\s\-\s(.+)\s\-\s.+\s\-\s.+'){$name=$matches[1]; -replace '.+', "$name";}}
This works in that the file and/or directory names are changed, but it also gives me the error:
Rename-Item : Cannot evaluate parameter 'NewName' because its argument input did not produce any output.
At C:\...\FileStrip.ps1:1 char:28
+ dir | rename-item -newname {if ($_.name -match '\d{4,5}\-\d{5}\s\-\s(.+)\s\-\s.+ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidArgument: (Vivek Shyam:PSObject) [Rename-Item], ParameterBindingException
    + FullyQualifiedErrorId : ScriptBlockArgumentNoOutput,Microsoft.PowerShell.Commands.RenameItemCommand
I'm not sure how to fix this. Any assistance would be appreciated.

ok, thanks.
You've avoided the whole 'use the piped data implicitly' thing by the explicit ForEach. I'm ok with that, but I'm still curious how to get the non-ForEach version to not error.
Anyway, what you provided almost worked. I modified to be this:
dir -file |
   Where{$_.name -match '\d{4,5}\-\d{5}\s\-\s(.+)\s\-\s.+\s\-\s.+'} |
   ForEach-Object{
        $match=$matches[1]
        $newname=$_.Name -replace '.+', "$match"
        Rename-item $_ $newname
to get it working properly.
But it looks like the simplest form is:
dir -file |
   Where{$_.name -match '\d{4,5}\-\d{5}\s\-\s(.+)\s\-\s.+\s\-\s.+'} |
   ForEach-Object{
        Rename-item $_ $matches[1]

Replenishment - Msg WT134: Store order processing did not return any result

During the Replenishment run using TCODE: WRP1 following error is being encountered
<b>Msg WT134: Store order processing did not return any result</b>
The error is reported when more than 9 articles are being used.

impelemented the oss note: 979935

Robohelp 9 WebHelp - Searching doesn't produce any results.

Hi, I upgraded to RoboHelp 9 last week and now searching in Webhelp doesn't produce any results. I've created a new project, used the sample project, tried generating it to a new folder and results remain the same.
When I select the search tab, the status bar flutters with the "Waiting for file...." displayed indefinetly with the occassion display of the javascript: (void);
Screens shots are from the RH 9 sample project. Results are the same with my projects. CHMs generated work fine!
Any suggestions?

Mary
You added the problem to another thread that was not related as the issue there is the use of HTTPS. I have deleted that post.
You also started a second thread with a the same question. I don't understand how asking the question twice will help so I have locked that thread but created a link to this thread so that anyone with an answer can help you. If there is a reason for starting a second thread, please let me know.
Please just ask once and wait for a reply as this wastes moderator's time that is better used trying to answer questions.
Now to the problem. Searching with Chrome installed works just fine for most people so the problem seems to be local to you. If I have read you correctly, after installing Chrome, the search breaks no matter what browser is used.
Was that checked on other machines or just yours?
IGNORE THIS QUESTION - The answer is YES and that was in the post.
Did you also check that search was broken with the supplied sample projects? I know that works with the three browsers being discussed here?
Where was the help installed when tested by you both standalone and from the application?
Questions 2 and 3 are really only related to problems with Chrome. I have not seen anyone report Chrome also breaking the search in the other browsers. There's more to this than meets the eye as Chrome has not caused that problem for anyone else, or at least, no one has reported it.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Currency Translation not producing any results

Hello Everyone,
I have ran into a very strange problem with the out of the box currency conversion. I have a finance app and am using the Fxtrans script logic to execute my currency translation. The problem I am having is when I run the FX Restatement package I not getting any results. LC has the correct amount that was input but my other reporting currencies show zero. My Entity dimension (which is named Company) has the correct currencies in the currency column for each company, and the InputCurrency dimension has all of my currencies listed. Everything else is the same as the AppShell app set. One last note is I do have some additional dimensions in the finance application but I don't think that would cause any issue.
My Rate cube is built the exactly the same as the rate cube in appshell app set. The only difference is my category dimension is named scenario.
I have updated all the system constants files and the script logic to reflect the dimension name changes. Everything works as expected in the Appshell application, but I just can't seem to figure out why it won't work in my appset.
I am sure I have left out some details that are needed so please just ask and I will provide whatever I can. I really appreciate any help anyone can provide.
Thanks in advance!
Nick

So I figured out the issue. For some reason the data that was in the WriteBack table for any currency other than LC was not showing up in the report. Once I optimized the application the currency conversion showed up as expected.
Has anyone had this problem before. Any known solution?
Thanks,
Nick

Search do not produce expected results

Hi ,
When I select a list item from drop down list and search for the results it is showing items other than the item select in the list. Can any one help me..
- Thanks

could you please post the query and the search string.

Filter item limits - search not returning any results with large number of elements otherwise ok

Hi,
We are working through a problem we've encountered with Azure Search. We are building a filter string based on an "id eq 'xxx' or id eq 'ccc' or id eq 'vvv' etc. The id's are provided in a collection and we loop through, building the string until it's
ready to apply.
We are using 2015-02-28 preview at the moment.
We are encountering a situation where, after approximately 20 id's Azure Search doesn't return any results, nor does it appear to return any error code. I'm pretty sure that the url length is less than 8K.
Is there any limit on the number of filter elements in a query?

We followed up offline.
The symptom in this case was a 200 response with no body. The underlying cause is a URL parsing bug that tries to interpret colons in the query string as the delimiter of a URL scheme (like https:), but with a hard length limit of 1KB. We will work
on a fix for both the underlying URL parsing issue and the issue that caused it to surface as a body-less 200.
In the meantime, the workaround is to put colons as close to the beginning of the URL query string as possible. Specifically, putting $filter and facets first, and putting expressions with colons within those first, will mitigate this in most cases.
Note that the .NET SDK puts $filter and facets near the beginning of the query string by default, so if you're consuming Azure Search you might want to give it a try:
http://www.nuget.org/packages/Microsoft.Azure.Search/

Setup did not find any hard disk drive in your computer

I have an old Compaq Presario 7598 Desktop (Windows XP) which I use as a backup machine. Recently when I tried to start it I am getting "Unable to access hard disk,. Operating system not found on any devices". Then when I tried to start with XP Boot Disk (CD), I am getting "Setup did not find any hard disk drive in your computer".
Can someone help me to resolve this issue?
Thanks.

Repeatedly tap the F10 key at boot, you should see information for the hard disk.
Testing the hard drive:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bph05701#N100A0
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Setup did not find any hard disks installed in your computer

OK, I spent about 30 minutes looking for a solution to this and haven't found anything. I'm too lazy to keep looking, and I need to get back to work...
Setup info:
-Mac Pro (Early 2008)
-Dual 3.2Ghz processors
-32GB RAM
-RAID Card with four 1TB drives attached (RAID 5 with two volumes: one Mac OS X 10.5.3 and one Mac OS X Server 10.5.3)
-320GB SATA drive that originally came with the unit in hard drive bay 1, now installed in the 2nd optical drive bay and connected to the 5th internal SATA port. It's partitioned with BootCamp: 32.88GB for Mac OS X 10.5.3 (installed and running, used to create the BootCamp partition) and 264.71GB available for Windows.
Windows install disc:
Took my Windows XP SP1 install disc and used nLite to slipstream SP2 and SP3 and burn a new install disc.
When I boot into the Windows install disc, everything goes fine, until it actually gets to the part where I should be selecting my hard drive (Hit Enter to Install Windows) for installation. Instead , when I hit enter, I get the message that "+Setup did not find any hard disks installed in your computer. blah, blah, blah, hit F3 to restart.+"
I'm assuming this is a SATA issue and that I need to get a SATA driver slipstreamed into my install disc so that the Windows installer will see the SATA drive.
Any suggestions on how to proceed?

Everything I've read says that that won't work because I have the RAID card.
Sounds like I'm out of luck, if BootCamp can't be installed on a SATA drive not connected to one of the original 4 bays.
Also, I'm concerned about taking the RAID drives out (I'd have to take all 4 out or it corrupts the RAID setup when I stick the one back in) then putting them back in and having everything return to an All Good status.
Message was edited by: chadcole26

I own an account on iTunes two years ago, almost always used it two days ago, the account stops working do not know why when I open the account Italpin reset your password and resend the email to and I did not receive any Klnh aftermarket tried a lot and

hi
I own an account on iTunes two years ago, almost always used it two days ago, the account stops working do not know why when I open the account Italpin reset your password and resend the email to and I did not receive any Klnh aftermarket tried a lot and Amaisalna something please help

CHANGING APPLE ID/EDIT ACCOUNT INFORMATION/CHANGE ITUNES COUNTRY
Tap Settings / iTunes & App Stores, then tap the Apple ID signed in. Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID http://support.apple.com/kb/HT2731?viewlocale=en_US
To edit account information tap Settings / iTunes & App Stores / Apple ID: / View Apple ID
To change your iTunes Store country, sign in to the account for the iTunes Store region you would like to use, tap Settings/iTunes & App Store/Apple ID/View Apple ID/Country/Region
Read this article for information http://support.apple.com/kb/HT1311

I am having an old ID on apple but did not have any type of card so what your problem

I am having an old ID on apple but did not have any type of card so why can not I use it

If you only want the free apps, take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Your search did not produce any results

Similar Messages

Maybe you are looking for