Yoxos installer requests credentials because of non OpenSource profile
Hi,
I have just download the Eclipse SmartHome.yoxos file (github.com/eclipse/smarthome/blob/master/targetplatform/Eclipse%20SmartHome.yoxos) and when trying to start it, the following message is displayed:
"There credentials will be stored on this computer under the user 'xxx'.
Authentication is required to access shared (non-OpenSource) profiles."
Image at: i.imgur.com/K9B82Ok.png (Cannot post links to sites other than eclipse.org...)
I don't have an yoxos account. Cancelling will cancel the start of eclipse. What am I doing wrong?
For openHAB and openHAB2 the yoxos installer works fine.
Thanks,
Dominic
Hi Dominic,
Sorry for not responding earlier! You are right, there is a problem with the Yoxos IDE setup - the reason is that Yoxos has actually closed its public service and thus it only works for people who already have an account there
I am currently working on an Oompf-based IDE setup as a replacement. Until this is available, you might use the openHAB 2 Yoxos profile (https://github.com/openhab/openhab2/blob/master/targetplatform/openhab2.yoxos) as a replacement as this one continues to work as it does not require any credentials.
Best regards,
Kai
Similar Messages
-
The installation input you entered contains Non-ASCILL Characters
Error: The installation input you entered contains Non-ASCILL Characters
Please reenter the input that only contains ASCII Characters
What does this error means?
It occur when i am trying to install Actuate Reporting Server.
I try to look through the forum and some people mention setting the LANG environment variable
I added these under .profile in my user directory
LANG = en_GB.8-UTF
export LANG;
But still getting the same error messageHi ...anyone can give some input on this issue?
I suspect it is the keyboard mode problem.
Because when i try to print out the mode of keyboard it is u for unencoded events
but when i change the keyboard mode to ASCII by press kbd_mode -a
i cant seen to be able to input anything into the terminal
so i really don't know what to do -
Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa
Moved thread to Android development.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
I bought mountain lion en app stores and start download, but stops and mentioned is incomplete. and when start installation mentioned error because download is incomplete and send me to download again but the button is in "downloaded" what can i do?
Welcome to the support forums.
Please ask this question in the Mac App Store forum where they can better assist you. -
I have used Azure managed Cache (Basic tier) in my Web App deployed on cloud service.
Now I am getting exception. ErrorCode<ERRCA0017>:SubStatus<ES0007>:There is a temporary failure. Please retry later. (The request failed because the server is in throttled state) on Production environment.
I know, this exception is occurred when memory usage reached more than 95%.
I want to handle this issue in code so please provide the right solution.
My Clients are facing it... so please help me .
Its very urgent.
Server Error in '/' Application.
ErrorCode<ERRCA0017>:SubStatus<ES0007>:There is a temporary failure. Please retry later. (The request failed because the server is in throttled state)
Description: An unhandled exception occurred during the execution of the current
web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0007>:There
is a temporary failure. Please retry later. (The request failed because the server is in throttled state)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace
below.
Stack Trace:
[DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0007>:There is a temporary failure. Please retry later. (The request failed because the server is in throttled state)]
Microsoft.ApplicationServer.Caching.DataCache.ThrowException(ErrStatus errStatus, Guid trackingId, Exception responseException, Byte[][] payload, EndpointID destination) +551
Microsoft.ApplicationServer.Caching.SocketClientProtocol.ExecuteApi(IVelocityRequestPacket request, IMonitoringListener listener) +287
Microsoft.ApplicationServer.Caching.SocketClientProtocol.Upsert(VelocityPacketType type, String key, Object value, DataCacheItemVersion oldVersion, TimeSpan timeout, DataCacheTag[]
tags, String region, IMonitoringListener listener) +357
Microsoft.ApplicationServer.Caching.SocketClientProtocol.Put(String key, Object value, DataCacheItemVersion oldVersion, TimeSpan timeout, DataCacheTag[] tags, String region, IMonitoringListener
listener) +74
Microsoft.ApplicationServer.Caching.DataCache.InternalPut(String key, Object value, DataCacheItemVersion oldVersion, TimeSpan timeout, DataCacheTag[] tags, String region, IMonitoringListener
listener) +288
Microsoft.ApplicationServer.Caching.<>c__DisplayClass2f.<Put>b__2e() +146
Microsoft.ApplicationServer.Caching.DataCache.Put(String key, Object value, TimeSpan timeout) +263
Microsoft.Web.DistributedCache.<>c__DisplayClass31`1.<PerformCacheOperation>b__30() +19
Microsoft.Web.DistributedCache.DataCacheRetryWrapper.PerformCacheOperation(Action action) +208
Microsoft.Web.DistributedCache.DataCacheForwarderBase.PerformCacheOperation(Func`1 func) +134
Microsoft.Web.DistributedCache.DataCacheForwarderBase.Put(String key, Object value, TimeSpan timeout) +148
Microsoft.Web.DistributedCache.BlobBasedSessionStoreProvider.SetAndReleaseItemExclusive(HttpContextBase context, String id, SessionStateStoreData item, Object lockId, Boolean newItem)
+177
System.Web.SessionState.SessionStateModule.OnReleaseState(Object source, EventArgs eventArgs) +1021
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +165
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.34009
Thanks
hemaYou should add retry logic in case of retriable exceptions. If the retries fail as well you should reset the DataCacheFactory as suggested in this link.
http://blogs.msdn.com/b/cie/archive/2014/04/29/cache-retry-fails-what-next.aspx
Thanks,
Pallav -
Installation ended prematurely because of an error.
Hi There,
could need a bit of insight. I am trying to update my XI 3.1 installl with SP2.3. SP2 installed ok but installing FP1, 2, or 3 fails with the error message in the subject line.
Sometimes the install does not even start. After running the exe it unpacks everything and then the Language selection pops up and after that nothing more.
Any idea how I can get that to work? I had no issues with the CR FPs.
Thanks,
Stephani've found [a resolution related to a different product|http://forum.ventrilo.com/showpost.php?p=134644&postcount=36| Vista x64 Ultimate - Installation ended prematurely because of an error], where the poster reported the exact same "Installation ended prematurely because of an error" dialog and event id!
from a command line, i ran:
+d:\downloads\tempro_setup_dir\TEMPRO_3.3.3.exe /passive+
and that installed tempro "silently". to quote [the thread where i found the resolution|http://forum.ventrilo.com/showpost.php?p=134644&postcount=36| Vista x64 Ultimate - Installation ended prematurely because of an error]:
{quote:title=Countdmoney wrote:}{quote}
> This will run the installation without the dialog boxes of the installer being displayed. Of course you will be accepting all the defaults, but the 64-bit version installs in the "Program Files" directory.
phew! finally i can now resume all those annoying alerts ;) -
Hi,
I am developing .net application, I have found an issue : TranslateApiException: Cannot find an active Azure Market Place Translator Subscription associated with the request credentials. : ID=1250.V2_Soap.Translate.14B2EC51
Recently signed up, sometimes it translated, most of the times i am having this exception
And cannot able to translate the large amount of characters, exception raised as : 403 Entity is too large
I set an maximum buffer length 2,147,483,647 too in web configuration
Thanks in advanceHello Charulatha Suryakumar,
You can verify that you are subscribed to the Translator API, by going to your
My Data page on Windows Azure Marketplace. It may be that you have reached the maximum monthly volume limit and need to upgrade your subscription level.
Try shortening your requests. Currently, you can translate a maximum of 10000 characters. We recommend keeping each request between 2000 and 5000 characters to optimize response times. There is not a limit to the number of requests per minute.
Hope this helps. Thank you.
Microsoft Translator team - www.microsoft.com/Translator -
"post installation requesties of oracle 11g database in windows"
Plz can any one tell me what are the post installation requesties of oracle 11g database installation in windows?
thanks & Regards
Vikash
"All Izz Well"Hi,
before installing check c:\> setup.exe -debug
after installation
You need to create service using oradim utility. with proper account
http://download.oracle.com/docs/cd/B28359_01/install.111/b32006/postcfg.htm
as per database
1)check for invalid objects in the database. select count(*) from dba_objects where status='INVALID'
if persists run @?/rdbms/admin/utlrp.sql
2)check the invalid from registry select comp_name,status from dba_registry;
3)compare the objects before & after activity.
THanks
Edited by: CKPT on Nov 10, 2010 3:56 PM -
Why Tempro 3.3.3 "Installation ended prematurely because of an error"?
hello forum,
i have a Satellite L500-1XD running windows 7 64 bit. i _had_ tempro 3.0 preinstalled from when i first bought the satellite in mar '10. for months, i ignored tempro's demands to update to tempro 3.3.3; until today. so, i downloaded it from [here|http://eu.computers.toshiba-europe.com/tempro/ToshibaW7TEMPRO.zip|http://eu.computers.toshiba-europe.com/innovation/generic/TEMPRO_W7_RELEASE/].
when i ran the TEMPRO_3.3.3.exe file, i got the "Welcome to Toshiba TEMPRO Installation Wizard" window as expected. but then when i clicked the "Next" button, all i got was a "Fatal error" dialog that said "Installation ended prematurely because of an error".
I searched this forum for a solution and i found [this thread|http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=167329|Satellite P100 fails to instal TEMPRO 2.0.3] that advised the original poster to uninstall the previous version. so, that's what *i* did. i uninstalled the working version 3.0 of Tempro that came preinstalled. but when i tried to install 3.3.3 again, i got the same "Installation ended prematurely because of an error"! now, i don't have tempro at all!
please, can anybody help with advice on what to do to get this thing successfully installed? i found a related entry in the windows 7 event viewer (see below) if that's of any use.
thanks in advance for your help.
=================================
Event Properties
General Tab
Windows Installer installed the product. Product Name: Toshiba TEMPRO. Product Version: 3.33. Product Language: 1033. Manufacturer: Toshiba Europe GmbH. Installation success or error status: 1603.
=================================
Event Properties
Details Tab
- System
- Provider
[ Name] MsiInstaller
- EventID 1033
[ Qualifiers] 0
Level 4
Task 0
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2010-10-29T23:25:17.000000000Z
EventRecordID 67671
Channel Application
Computer ********
- Security
[ UserID] S-1-5-21-3117272653-2424292012-3940679202-1001
================================================== ==========
- EventData
Toshiba TEMPRO
3.33
1033
1603
Toshiba Europe GmbH
(NULL)
7B44424237303231412D333433372D343436462D414345352D 3732363136343441393732437D303030303135663933366262 66613039636634636236336531616535393861636632316330 30303030393034
Binary data:
In Words
0000: 4242447B 31323037 34332D41 342D3733
0008: 2D463634 35454341 3632372D 34343631
0010: 32373941 30307D43 35313030 36333966
0018: 61666262 66633930 36626334 61316533
0020: 38393565 32666361 30306331 39303030
0028: 3430
In Bytes
0000: 7B 44 42 42 37 30 32 31 {DBB7021
0008: 41 2D 33 34 33 37 2D 34 A-3437-4
0010: 34 36 46 2D 41 43 45 35 46F-ACE5
0018: 2D 37 32 36 31 36 34 34 -7261644
0020: 41 39 37 32 43 7D 30 30 A972C}00
0028: 30 30 31 35 66 39 33 36 0015f936
0030: 62 62 66 61 30 39 63 66 bbfa09cf
0038: 34 63 62 36 33 65 31 61 4cb63e1a
0040: 65 35 39 38 61 63 66 32 e598acf2
0048: 31 63 30 30 30 30 30 39 1c000009
0050: 30 34 04i've found [a resolution related to a different product|http://forum.ventrilo.com/showpost.php?p=134644&postcount=36| Vista x64 Ultimate - Installation ended prematurely because of an error], where the poster reported the exact same "Installation ended prematurely because of an error" dialog and event id!
from a command line, i ran:
+d:\downloads\tempro_setup_dir\TEMPRO_3.3.3.exe /passive+
and that installed tempro "silently". to quote [the thread where i found the resolution|http://forum.ventrilo.com/showpost.php?p=134644&postcount=36| Vista x64 Ultimate - Installation ended prematurely because of an error]:
{quote:title=Countdmoney wrote:}{quote}
> This will run the installation without the dialog boxes of the installer being displayed. Of course you will be accepting all the defaults, but the 64-bit version installs in the "Program Files" directory.
phew! finally i can now resume all those annoying alerts ;) -
During a deployment from wds i get the following error with windows 8.1 "windows installation cannot continue because
a required driver could not be installed".
Hardware : Gigabyte GA-Q77M-D2H.
I got image from installation Disc.
When the error occors this is the event in the admin-log on server 2008R2
The following WDS Client has encountered Fatal Error:
SessionGuid: {01208fe1-bb0c-49d6-9e32-0000da4897af}
MAC: 000C29D627F6
IP: 192.168.208.86
ClientGuid: {2f904d56-a52b-3220-a351-79ecd5d627f6}
Arch: 9
ErrorMessage: Windows installation cannot continue because a required driver could not be installed.
What to do?
Thank you in advance.Hi,
The problem is a unsuccesful installation of driver in the driverstore, the first step would be to ensure that you are using the latest driver for the hardware and operating system or you’re experiencing
compatibility issues with a driver.
Then I suggest pressing shift+f10, and type diskpart then lisk disk, view whether all disks work fine.
Regards,
Yolanda
Yolanda
TechNet Community Support -
1.5 plugin installer cannot continue because files unavailable
My applet wants to use any 1.5 plugin with
codebase = "http://java.sun.com/update/1.5.0/jinstall-1_5-windows-i586.cab#Version=1,5,0,0" .
But after downloaded the 1.5 plugin successfully and install begins, I get this popup error (that I cannot cut and paste, so anonyingly I'll type in manually):
Error - Java(TM) Installer
"This installer cannot continue because the files necessary for installation are unavailable. If trying to install a beta or older version, please check http://java.sun.com/j2se to deterimine if it is still supported. If so, please try installing at a later time, as these files might be only temporarily unavailable."
I tried to to this plugin install over several days, as of Feb 20, 2005, it is still error popup and NO GO. So my applet is unusable for people who have no 1.5 plugin.
By the way, this installer worked a week ago.
Anyone has similar problem?Thank you. You are right. The error was actually produced by j2EE 5.0's htmlConverter.exe that
errorneously produced "1.5.0/jinstall-1_5-windows-i586.cab"
instead of "1.5.0/jinstall-1_5_0-windows-i586.cab". -
Different installation guide between client and non-client
hello,
i am windows user and still newbie, but i am still confuse. well, make it quick answer for me:
what is different between Database Installation Guide for Microsoft Windows ( non-client i mean that ) and Database Client Installation Guide for Microsoft Windows?
It's same or not?The former discusses creating the database and the listener, the latter doesn't.
Likely the latter is a very small subset of the former, ie if you install the database on the server, that server implicitly has a client.
Sybrand Bakker
Senior Oracle DBA -
When attempting to install Acrobat 11 Professional the following came up The installation cannot proceed, because some of the processes are running.
The Installation failed
The installer encountered an error that caused the installation to fail.
Contact the software manufacturer for assistance.If the processes are listed, turn them off before intiating the installation. Usually these processes are something running in the background, and can include virus protection. Here are some links that can help close the background programs:
Closing Programs Interfering with Installation
PC - Task Manager: (CTRL-ALT-Delete)
http://support.microsoft.com/kb/323527
Mac - Activity Monitor:
http://osxdaily.com/2010/08/15/mac-task-manager/ -
CTI warning: The request failed because the timeout limit was exceeded.
hi,
For a perticular IP Phone extension when agent is going to login using CTI agent toolkit then CTI generatin this msg "CTI warning: The request failed because the timeout limit was exceeded". but the other ph is working fine. I have deleted this phone and add againg. And the ph re-associate with PG and JTapi user. but still have the prob. For more plz see the find attached.Your first troubleshooting step here should be to check what JTAPI Gateway thinks is the state of that extension, you can easily check that through procmon. Here's an example from my lab.
C:\Documents and Settings\Administrator>procmon ipcc pg1a jgw1
>>>>jdi 2000
>>>>
Addr: 2000 ActiveLines: 0 RegistrationState: IN_SERVICE
m_CurrentInvokeID = 0
m_elapsedTPServicesRequestSeconds = 0
queuedDTMFDigits = null
sendingDTMFInProgress: N
sendQueuedMsgAddCallObserverResponse: Y
monitoredVirtualDialerPort: N
virtualDialerPort: N
loggedInAgent: N
DeviceStatus : UnmonitoredDevice
addressDeviceType : GWMSG.DEVICE_TYPE_DEVICE
observeredTypeString : logged Out Agent Device
isAddressRestricted: N
addressDeviceProtocol : PROTOCOL_SCCP
silentMonitorStatus : 0
silentMonitoredCallID : -1
TerminalName : SEP001BD52C547F
The RegistrationState should be IN_SERVICE for a phone that is registered with CUCM. If you can see that the phone is registered with CUCM in it's adminsitration pages, made sure that it's in the list of associated devices, made sure you're running the correct version of the jtapi plugin and still see it as OUT_OF_SERVICE, you're probably looking at a CTI Manager defect. CSCti07947 and CSCti11651 spring to mind but there are probably a couple more.
Most of these defects should be fixed in releases like CUCM 7.1(5), 8.0(x) and up. If the issue persists, you're probably best off opening a TAC Service Request to identify the exact cause. The PG (JTAPI Gateway) only shows you what it gets from CTI Manager, so as you can see from my above observations, you'd want to focus your troubleshooting on the CUCM end. -
How can I open Firefox 3.6.15 in non-administrator profiles?
When I installed Firefox 3.6.15, the previous version (3.6.13) opened in non-administrator profiles on my computer. I uninstalled 3.6.13, but firefox.exe is now in a different location: c:\Documents and Settings\All Users\Application Data\Mozilla Firefox. Administrator rights are required to open the file in this location. How can I get Firefox to open now?
Firefox installs to C:\Program Files\Mozilla\Firefox by default.
Did you do a custom installation to that \All Users\AppData folder?
Maybe you are looking for
-
Hi Friends, I ran a load yesterday for Datasource 0HR_PT_3, it went fine, today i wanted to load for specific time, so i wanted to check how many records would i get. In rsa3 i am trying to run for that period, strangely i am getting an error "Infoty
-
Best way to manage an "Esc" pressed by the user
Hi friends I normally create dialogs to offer options to the user before executing the script functions. So, having a "Cancel" button in this dialog would suit the need for an user to cancel the operation. But let´s say the user selected the options
-
How to retrieve the host prefix in a workflow step
HI i am trying to generate a link in a process step, but I dont know how to get the host prefix http://localhost:4503 any idea? thanks
-
Hi All, Can you please let me know any link for current CRM 2007 architecture. Moreover CRM 2007 CIC Architecture - any SAP standard info available. I know cross posting is very bad habit, but by mistake I posted in CRM 2007 instead of this community
-
Conversion from ABC to 123 format causes data loss
Hi, I have imported Excel data onto Lumira. The data set contains a "Net Price" column which is detected as ABC. Whenever I convert it to numerical format, I lose some data. Please see the snapshots. What can be the issue? Any background information