Z60t wireless/Internet access problem

I purchased in 2006 at office depot, after a year and a half of using it just stop accessing the internet, I am so desperate since I am not a computer junkie, my needs are simple just to be able to receive and send emails and easy net surfing. I called Lenovo but they are not willing to help since my machine is out of warranty. Please help me, I lost my jo, my home cannot afford to take it to a service location IBM recommends. Thank you.
Moderator edit: Added description of problem to subject.
Message Edited by bananaman on 07-12-2009 10:58 PM

Hi there Bananaman, you are one of those wonderful volunteers out there, anyway, as I have said purchased machine on 06 worked for at least year and a half then quit on me. I cannot access the internet, took it to office depot since I purchsed it from them, they're offering FREE tune up had me purchase a Linksys LAN card telling me the built in wireless netcard had given up on me. Did not help, they sent me home w/ the LAN card assuring me it will work since in my house I have a wide range of wireless internet connection whatever. Did not work either. Called IBM Lenovo only to be declined of tech support because machine not warranty covered. Yesterday, I tried to fix it(LOL) for a miracle to struck me but to my despair. I don't know what to do, I want to take it to service center recommended by IBM but got no green. I am hopeful that, being a member of the Lenovo community, I could find some real help from real people like you. These are the characters I see at the back of my machine I think as the product number, (TYPE  2511 - FEU  S/N  *******   0510) Thank you.
Moderator edit: Masked serial number to prevent mis-use.
Message Edited by bananaman on 07-12-2009 10:54 PM

Similar Messages

  • Wireless Internet access via requires unplugging cable modem -

    I have a brand new MacBook Pro with Snow Leopard (10.6.1) and Airport Express (7.4.2). I have high speed Internet via Comcast/cable modem. I spent 30 minutes with the Apple Tech Support folks and was finally able to get wireless internet access. However, after I shutdown and reboot, the only way I can wireless internet is to unplug the internet cable from both the wall plug and cable modem and unplug the modem, both for about two minutes. This isnt what I had in mind when I crossed over from the dark side (PC laptop world) and am having buyer's remorse. Does anyone know how I can fix this problem (i dont want to unplug cables before each session on the internet)?

    Mr. Timmons,
    Thank you so much for the response.  I thought the complete reboot would work, but apparently not.  I followed the directions precisely, even waiting a few minutes longer than suggested for each of the steps.  My air express is still blinking yellow.  I think the issue has something to do with the DHCP and the IP address which are diifferent. The IP address is one series of number (starts with 169), and the LAN IP address is another number (starts with 10). Status on airport express show yellow for internet connection, and yellow for no DSN servers. When I go to the internet tab of airport utility, it shows the iPv4 address starts wutg the 169 number. When I click on the network tab, the DHCP range starts with the 10 number.  When I open the Network Options window, the iPv4 DHCP range starts with the 10 number.  I am at a loss as to how to get them to match up (with either the 169 number or the 10 number).  V/R sjbgtmo

  • Wireless internet access in other countries

    Does anyone know if the iBook can be used for wireless internet access in other countries, specifically Buenos Aires, Argentina and Italy?
    iBook G4    

    Hi,
    never had any problems with this (hotels and airports throughout Europe, Middle-East,...), somethimes you get immediate access to a provider when using your browser (then all you need to do is buy time with your credit card number); or by using the internet application: you will see the names of the providers in the list because of the signals your computer receives; then again you need to buy time;
    greetings, Dag

  • Wireless Internet Access (Cisco IP NGN or Cisco Wireless Mesh Networkin)??

    Dear Cisco Wireless Team
    Please educate us on where to start, or the CISCO product we might need to purchase
    We are trying to branch out a new Internet wireless access and wireless phone service business in our company, and presently looking for the right Cisco product solution to purchase to enable us offer this service in LAGOS, NIGERIA.
    The service will be rendered in Africa, the country NIGERIA, and the city LAGOS.
    We would like to mount or install the product in Lagos, Nigeria.
    As we are new to this kind of service. We would appreciate if the Cisco wireless team can work with us in pointing or directing on the right product to purchase and what are required. We understand the Cisco Wireless Mesh Networking Solution, Cisco IP Generation Network, Cisco 12416 or 7600 Series Router might be the right products to purchase, but we are not sure on what needed or what are required to meet our service need.
    Possibly we would like to offer Wireless Internet Access to unlimited subscribers, and also Wireless or Mobile Phone service to unlimited subscribers in Nigeria.
    Anticipating your reply

    I suppose Cisco Wireless Mesh Networking would be a good choice.The Cisco mesh architecture makes it easy to scale coverage as capacity needs dictate, including increasing access point density; adding wired connections, controllers, and radios; and using dual high-powered, high-sensitive radios and a selection of high-gain antennas.Refer the document for IP NGN in the following URL http://www.cisco.com/en/US/netsol/ns537/networking_solutions_solution_category.html

  • Restrict wireless internet access on certain periods of time

    Hello,
    We need help on setting up a network with some restrictions for the attached clients.
    We're quite new at setting up a network at this size.
    Used devices:
    1x SRP 540 router
    1x SG 300-10P managed switch
    4x AP 541N accesspoint
    What we want to do:
    1. Around 100 laptops and desktop computers need wireless internet access, but some of them on limited times during the day.
    2. Not all wireless devices are allowed on using the wireless network.
    3. There are also wired desktops that don't need restrictions.
    4. We need the possibility to restrict most of the wireless devices to access certain websites or use certain applications on those computers to use internet access during the times that the computers are allowed to access the internet.
    5. We want to restrict the clients for using torrents or other possibilities of downloading illegal content.
    What we were able to do:
    1. The accesspoints (AP 541N) are clustered to achieve 1 large wireless network.
    2. Only mac-adresses that are listed in the accesspoints are capable of using the wireless network. Other mac-adresses are not allowed to use the accesspoints.
    What we tried already:
    1. adding the mac-adresses for the accesspoints to the list of "internet access policy" in the router. Internet access seemed still possible during periods the access wasn't supposed to be possible.
    2. adding the mac-adresses from all clients in this internet access policy seemed useless. Only 10 Internet Access Policies seem to be possible to program. 8 mac-adresses per policy. Knowing there are (at least) two policies needed to restrict a group of 8 macs to access the internet in 24 hours (because blocking the internet from f.e. 22u in the evening to 6 in the morning is not possible because 6 is smaller than 22 - or 10PM).
    Besides, after blocking internet access, we need also to write policies in blocking some websites or keywords.
    Thanks already for your guidelines.
    Wim

    what about the thoughts of radius for authentication which is connected to active directory for your wireless users. Then have those people you must limit access too during the day in their own security group that's only allowed to login to the domain during certain times of the day.
    To limit sites or what they can do on the Internet will require a separate solution for content/URL filtering. Then you can make policies and apply to your security groups in active directory block by category, keyword, and so on.
    This is all great assuming you can get these clients into AD.
    Just a quick thought, hope it helps.
    _dschlicht
    Sent from Cisco Technical Support iPad App

  • I recently bought an i phone 5, but in the home with wireless internet access, it si countinued when off, i do not know what reason.  but i go to apple store, the phone can working with Wi-Fi

    i recently bought an i phone 5, but in the home with wireless internet access , it is continued when off, sometimes can not working,
    i do not know what reason,  but i went to apple store, Ha, the phone can go to Wi - Fi and connected is good.

    but in the home with wireless internet access , it is continued when off, sometimes can not working,
    What does "it is continued when off" mean?
    And the same for "somtimes can not working"?

  • Relocating and wireless internet accessibility

    I'm relocating and I'm wondering how I can find out if I have wireless internet access there and if I can keep my Fios or if I'll have to switch to another provider.
    Thanks.

    You may want to post this on the Residential side of the forum as this is for the cellular phone side.
    At the top of this screen is a tab RESIDENTIAL. Click there and you can set up an account on that side and ask your question.

  • Internet access problems and viewing video on internet

    I have very limited interet access most of the time.  I get a message: "You are not currently in an area that can handle data communication.  ..."  I have no problem with email and other features of the phone during this time.  The signal at the top of my phone says "GSM".  When I am able access the internet, it give me a different signal (can't remember what that is, however).  Even then, I cannot view most video clips, such as YouTube clips.  They will not load all the way.  It states, "Error has occurred in attempting to play media."  Help!

    I have unlimited internet access, so that's not the problem.  Right when I got the phone, I replaced the original data card with a 4G card and enabled mass storage.  I have (since my first post) had more access capability by enabling the WiFi (da) which finds my wireless connection at home.  I've also been able to view a video clip, not successfully all the way through, however.  During viewing, the phone appears to crash, i.e. the screen goes white and then it takes 3-5 minutes for it to reboot.  This has also happened when the phone has not even been being used.   Also, as I was surfing the net, the phone asked if I wanted to enable Javascript which I did.  Is there anything else that I need to enable or do to the phone in order to have a more pleasant experience using the internet and viewing video clips? 

  • Complete wireless internet access failure:(

    Ok everyone, here is the low down for the last month.
    I use a 2005 ibook G4, access internet and email set up w/ Mac Mail thru my airport card and jump on wireless cafe that i live next 2. For 3 whole months, i was set up and running internet and email perfectly. I didn't change any setting, service, etc. Except the network from cafe (from linksys to RGII).
    1st: as of 1/1, i lost my ability to send email thru Mac mail using wireless access (thru cafe). Error was "port 25 timed out". After spending 4 days with ISP, setting- resetting POP account and outgoing server, pinging port 25 to verify sent, scanning port 25 to verify, etc, etc, etc. This produced no resolution.
    2nd: as of 1/21, I have lost complete internet access. I have run the network diagnostic to fix, no go...
    SO, I took my ibook to the Genius bar at Apple store for a looksy. Sure enough some setting were off or changed, (by my own troubleshooting). After everything was checked and reset, all was A-OK (at the Store). I could access internet, received AND send email. Yippee!
    NOW here is the tricky part... as soon as i got home and turned her on, I could see the airport finding networks (RGII), But when I try to access email or internet (thru Mac Mail, safari) it says my ibook is not connected to internet, same for email. I run the network diagnostic, and it can't fix problem.
    When I go next door to see if the cafe is having router problems on there end...Nope everyone is accessing the internet just fine:(
    This is NOT a problem with password etc, As the cafe is set up with authentication as NONE. Plus everyone there is able to use the wireless access.
    So what do you propose is my problem? Remember this was all working fine for 3 months and started to fall apart this last month. In addition, to having eveything work just fine at the Apple store a mere 30mins before.
    Could this be an issue with the RGII network i am jumping on?
    Why would I be the only person effected and not everyone at the cafe?
    ibook   Mac OS X (10.4.3)   wireless access at cafes

    Though it doesn't solve your issue, I thought I'd
    share that I can access many non-Apple access points
    (Cisco 1200's, Linksys WAP54G's for example) with OS
    10.4.4. This being so, I think we're safe to assume
    the issue is not related to a recent OS update.
    I'm afraid I must disagree with this. Few months back, I lost my Airport connection when I installed the 10.4.3 System Update. Fixed by restoring from backup and going back to 10.4.3. Managed to upgrade to 10.4.4 successfully and maintain wireless connection to a Compex 802.11g base station. Then I made the mistake of accepting the Airport 2005-001 update. Immediately lost my Airport connection. Other PCs can connect to the base station, and I can access the internet by connecting my Powerbook to the router using Ethernet. Can even see the Airport network and login to the router's admin page over wireless. Only thing that doesn't work is connecting to the internet wirelessly.
    Once I changed my base station to an older one I had lying around, I can connect wirelessly again and all seems well.
    My conclusion is that Airport Update 2005-001 definitely broke compatibility between Airport Extreme and some 3rd party base stations. The irony is that this update was supposed to "improve" compatibility !

  • Wireless internet access issues

    Hi All,
    Now that I have the back up battery issue resolved and my mac works again, need some help with my airport connectivity.
    I have a circa 2000 Imac DV, using OS 9.1. I just purchased and installed an airport card. I used to use dial up internet access and am now trying to access the internet via my Verizon wireless DSL. The little telephone icon appears on the tool bar. Is this correct?
    The computer won't recognize my secure WEP DSL password and seems to try to access the internet via the PPP connection.
    I have a secure WEP internet connection. Just a few days ago a friend of mine was able to access the internet from my DSL via her new powerbook. Her computer accepted my WEP password.
    Do I need to make any system configuration changes to turn off the PPP connectivity to use my airport card?
    Thanks, Ken

    kweiss66, Welcome to the discussion area!
    You are in completely the wrong discussion area. You need to post your question in the iMac CRT (G3) discussion area.

  • HS-1200 breaks Wireless Internet access

    FYI, I just installed and started using the HS-1200 yesterday and they are awesome. An unfortunate side effect is that it breaks the wireless internet in my house. Wireless routers and the headset both operate at 2.4GHZ and they don't play well together. I thought it may have been my Belkin N1 Vision router so I went out and bought a Linksys WRT310N and it does the same thing. The remote computer have trouble connecting and when they do they get around 1mbps. Turn off the headset and poof, back to 36-54mbps. I have open tickets now with all 3 parties involved so hopefully there is a fix, otherwise the $106 headphones have to go in the closet and that would really p_ss me off.
    I can't believe that this problem didn't present itself anywhere in their testing and QA process.

    Im having the same issue also SabreHawke. I use my HS-1200, with my desktop replacement laptop, and off and on, the wifi light indicator turns off then on. Never had this issue before. Been using wireless channel 2 for about 3 years now, w/ great connection. Not sure what channel the headset uses. I cant use the default channels, i think 6, 9, 11, cause once someone turns on the microwave it disconnects. Guess i'll try some others, but channel 2 has been the best. Other than this i love the headset, :-).
    Edit: Did speakeasy speed test.
    Normal (w/ headset off): Download ~10mbps w/ speedboost up to 16. Upload ~2mbps.
    Headset On: Download ~1.5mbps. Upload ~1.0mbps.
    Message Edited by kama64 on 08-05-2008 07:00 PM

  • IMAC Wireless Internet Connection Problems All Of A Sudden

    My Imac is well over a year and a bit old and has been able to connect to my wireless internet connection absolutely fine until the past week and a half. At first the connection wouldn't work and when I would turn my airport on and off and reset the router, it would eventually work, now that is not working at all. My airport status is either showing 'airport is turned on but is not connected to a network' or 'airport has a self-assigned ip address and may not be able to connect to the internet'
    I have formatted my imac twice and still no avail and the last format I tried to join wirelessly straight from boot but it wouldn't join saying 'there is a problem with the wireless connection and you're not connected to the internet.' the annoying thing is I can see the network sitting there and can't join it, my network is also unsecure so no need to input a password. All my home PC's and my Iphone and Blackberry find the network easily enough, although recently the Iphone has began showing only 1 bar of wifi connection.
    I am at my wits end as I am unable to connect at all now, I am all out of ideas and have been bashing my head off a wall for the past day without any connection at all.
    My router is a buffalo AirStation wireless G high power model, my IMAC is an intel core 2 duo 20", if you need anymore information of my hardware I will gladly provide it. I'm running MAC OSX Leopard 10.5, out the box as I've been unable to run any software updates as I can't connect to the internet.
    Please, if anyone can shed any light at all on this issue I would definately try anything.
    Thanks in advance and regards.
    Message was edited by: proxykillah

    Anytime you see a self-assigned IP address in your network prefs you know it surely is a problem
    with your router configuration. Power down all equip ... make sure modem is off for at least 5 minutes
    restart modem, restart iMac ... check your network pref on iMac and make sure it's not 169.x.x.x
    If so you will need to recapture the settings from your ISP's modem to the Buffalo.
    Always use a secure wireless connection (WEP, WPA, WPA2) or else the whole neighborhood will suck down your bandwidth the slow down what your paying for. I use Time Capsules or AEBS (Airport Extreme Base Stations) that allow you to stealth mode and lower signal output and make the device
    as a "closed network" ... meaning no one else can see and tap into your WIFI home network!
    802.11N is better than G. and especially when you can use dual bands 2.4 / 5GHz to stop various home interferences. The backup of Time Machine only makes life much easier also! Xtech

  • [SOLVED] Wireless internet connection problem during installation

    Hi to everyone!
    I ask you a help in activating my wireless connection.
    I tried to install from the recent ISO (201208 - via CD)
    but I found some problems in activating a wireless connection in the first steps
    of the installation guide.
    My laptop is a Hp pavilion dv5 1020-el, with an Intel wireless 5100AGN internal interface.
    So I did:
    1) iwconfig to see my devices and the system detects my wlan0.
    2) followed the Wireless_Setup page from wiki to set it
    3) used wpa_supplicant and passphrase to set my ESSID name and wpa key.
    4) iwconfig then showed wlan0 associated with my ESSID, with Power ON and Encryption OFF.
    I could not try a connection via ping command.
    Even wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf did not work.
    Maybe the problem is with Encryption OFF.
    Thanks for your attention!
    EDIT:
    I solved this way,connecting to an open wireless open  network:
    1.(from boot) I created a profile in /etc/network.d/ from /etc/network.d/examples
    2. started a # netcfg 'my_ESSID'
    3. # ping -c 3 www.google.com
    All is ok! I can install Arch Linux from my smartphone as a router.
    But I couldn't connect to a WPA protected wireless network yet.
    Last edited by spinaluc (2012-08-18 13:08:15)

    Thanks to everyone who responded to my question. The company who provides the wireless internet service to my apartment complex moved the antenna next to my unit and claims he boosted the power. As the saying goes, "The squeaky wheel gets the grease". I complained almost daily to the apartment manager and she, in turn, griped to the provider which eventually led to the "solution" above. Using Skype is still shaky as the person I'm calling isn't always able to make out what I am saying. So, I use Skype only when I REALLY need to make a phone call. Even though none of your suggestions solved my problem, I am still very, very grateful to all of you who tried. Thank you very, very much! -- Matt

  • New MBP - wireless/internet access networking problem - a summary!

    Greetings!
    New MBP here, with all the trimmings (MacOS X 10.4.10 - Safari 3 Beta). New also to the Apple/MAC world
    MBP >> wireless networking into a Linksys WRT54G router and >> thru HughesNet DW7000 Satellite Internet connection (not the fastest, but hey, the US and especially rural areas are NOT S. Korea when it comes to speedy internet connections!
    Frankly, I bought into it for two reasons: First, hearing about the vaunted Mac a/v/ and doc/photo editing capabilities,... and about MacOS stability, etc... Well, it all needs a little work still: on the part of new users like me, but also probably on the part of the Apple/Mac people as well. 2nd reason I decided to purchase the MBP - i.e. ability to run Windows (I have not yet tried BootCanp, etc...: still resolving preliminary issues!). I still live in a heavy Win environment at my business - no other way of course!
    Communications issues seem to still prevail: I am hanging out at several VERY HELPFUL forums (AppleDiscussionForum, MacRumorsForums, etc...) and the same issues keep popping up. Im my case, same as all above reported, with a few additional points, as follows:
    1. Xmission errors: seem to be - at least in my case - a constant factor, regardless on how close/far i am from my wireless router. For example, I would be attempting to dwnload an upgrade (large)QT or MacOS file. i am barely into the dowmoad, and I already have several Read/Send errors. By the end of the download, I will have probably about 15 Rcv and 5 Send errors. Never gets quite that bad in my Win machines, I must mention. Anything to do here (I know, there are such things always affecting wireless com). AND, MOST importantly, how that this affect the effectiveness of the upgrade (I spotted same thing with MacOS 10.4.10 and Safari Beta 3 upgrade downloads!). Would it be likely that applying upgrades in such circumstances would screw up the OS??? Could OTOH such errors be automatically "compensated" by re-xmits from the source, and eventually the download would be OK? Because quite frankly, I do NOT know if my important upgrade download was OK to apply to the system, given those errors!!!
    Also same thing with PING errors. Quite frequent when pinging another device on my network.
    2. Quite often, accessing a site will proceed somehow OK, and then things will get stuck twd the end, as if some buffer somewhere gets overloaded??? Of course, as elsewhere reported, same can often happen with com getting stuck right over the "www" part of the URL!
    3. AND, of course, the often reported "NO connection to the Internet", but computer shows good signal level and connection otherwise.
    4. Strangely enough, seems that the Airport Extreme wifi card sort of "warms up the the internet" as one proceeds to start using it. It eventually picks up on a network, and often "improves" its connection over time!
    5. Built in Airport Extreme seems to not exhibit up all immediately surrounding networks. Sensitivity issue?? iStumbler does.
    6. iStumbler permanently posts noise level of 9% regardless of how close to my wireless router/broadband modem I am. Anyone uses iStumbler to monitor network traffic?
    This is getting longuish: I just want to get over all those p*ant issues and get into putting my a/v stuff together!!
    - Roger T
    Thanks for just reading all this!. I am not sure it is all fixable (back to the Win "features" terminology, really meaning "bugs"??)

    Thanks, BDaqua. This support forum is quite well stocked: I have been perusing all its nooks and cranies!
    On the www.dslreports.com - All things Mac - forum, I spotted a couple of mentions of the following type of infromation:
    link: »www.hardmac.com/news/2007-07-27/#7039
    - The first TechNote provides information concerning the Airport problem affecting the MBP Santa Rosa (but also other Mac Intel). When used on battery, the wireless connection drops and one can even experience kernel panic. Apple Centers are asked not to exchange affected notebook as this is due to a unidentified bug in the Atheros driver, and should be fixed in the future with a simple Airport system update. So for the moment, unfortunate users are asked to directly power their notebook when using wireless network, or using Ethernet connection when running on battery... in other words, turn your notebook into a desktop
    to forum · permalink
    I am wondering if you and folks on this close-to-Apple forum know anything about this. At least, we could just await remedy instead of messing around endlessly looking for solutions and... pondering as to whether it was a wise thing to purchase an expensive machine which happens to have trouble communicating online. After all, seems that the Mac folks are prone to spend MORE time online uploading/downloading music and videos instead of my being normally doing with the rest of my (Win) computers, i.e. work on customer lists, correspondence, inventories, accounting, data bases, etc....
    So, seems to me we do have a pb and Apple might just save a few $$$ on silly ads and get to work on com instead. if nothing else to avoid the appearance of further - admittedly rather funny - ad-spoofs!
    So back to your further inquiry. I run a wireless network from a HughesNet satellite modem, thru a Linksys WRT54GL wireless router, into some nearby office LANed desktops and point of sale equipment, to another neighbouring facility via wireless bridge, and to my Mac laptop. Distance from the laptop to the router: 50 ft max.
    It all works surprizingly very well: up to 200kbps up and 1000 kbps down (in prime time, 150 up and 600 down). OK, my set up looks complex and incurring LOTS of activity. Actually, online activity is quite minimal and well scheduled - right now I am the only machine on the network online. Otherwise, our office processes online money wiring for customers among other things.
    I'll try your DNS server choice on the Mac settings first. Will report accordingly.
    Thanks for everything!
    - Roger T

  • Internet access problem

    I am having a problem with my WRT54GS router not being able to access the internet.  I can see it and administer it via wired or wireless connection.  I have tried the below steps in effort to trouble shoot with no success:
    1. verified that I am using a cable that works to go from my cable modem to the router
    2. reset the settings to default
    3. verified that it will not ping any web sites
    4. verified that it is picking up an ip address from the DHCP server *scratches head*

    As you are using Cable connection follow this steps .........
    1)  Connect the computer to the router & router to the cable modem
    2)  Check the Ip address on Local area connection .... if getting any valid Ip like 192.168.1.X  with gateway 192.168.1.1 ....... ping the gateway address .....if getting reply open the set up page using http://192.168.1.1  ....
    3)  You will see username & password screen...... leave username blank & in password use admin........
    4)  Look for mac address clone sub tab ..... under set up tab.....
    5)  Enable the service & click clone my pcs mac ........ click save settings ............
    6)  Click status tab.....check the Internet Ip address ........
    7)  Do power cycle & try going online ...........

Maybe you are looking for

  • Issue regarding executing manual partial settlement

    Hi guru: When I am going to execute manual partial settlement via vo02 and try to change the agreement status to B,then enter shift+f12,the system said that manual payment is not allowed for this agreement type,how to fix?

  • How to cut and paste with MacBook Air

    How do I cut and paste with MacBook Air?

  • CS6 layered psd to png's

    I have to import a set of png's from Photoshop to Edge Animate. The actual source file is a Photoshop psd but I cannot import the psd into Edge so I have to painstakingly export each layer as a png and there are over 40 layers. Is there a way to take

  • Qosmio F750 Toshiba applications have stopped working suddenly

    Hi there, can anyone help me? All toshiba applications in my Toshiba Qosmio F750 have stopped working. Including Toshiba bulletin board, tohsiba blu-ray disc player, toshiba reeltime, etc... I don't know why and when it stopped working... please help

  • Unable to print or totally communicate with remote jetdirects

    We have dozens of jetdirects across our enterprise. recently I noticed I am unable to successfully communicate with some of the jetdirects across WAN links. Local subnet: I can ping them successfully. i can telnet and manage them I can web into them