ZCL_IM_COM_PARTNER_BADI - not breaking on break point.

I have implementated a BADI but the methods
IF_EX_COM_PARTNER_BADI~DETERMINATION_ADD_IN_1,
and
IF_EX_COM_PARTNER_BADI~DETERMINATION_ADD_IN_2,
and
IF_EX_COM_PARTNER_BADI~DETERMINATION_ADD_IN_3
are not been called and when I but a break point inside IF_EX_COM_PARTNER_BADI~DETERMINATION_ADD_IN_3 it doesnt break during the creation of service oder.
Kindly assist.

fill in your batch sequence=10, dialog seq.=10 if it's the first access.
If your source is COM_PARTNER_X, then go to se18, enter badi=COM_PARTNER_BADI.
If you already created implementation, should find it under implementation menu -> overview and select your implementation. Otherwise, create a new one.
Then go to interface tab and click on DETERMINATION_ADD_IN_1 method. Implement your source codes here. Put an external breakpoint for testing.
Dont forget to assign your access sequence in the 'Partner function in proceudure' in partner determination procedure.
Lastly, assign the partner determnation procedure to your service order trx.

Similar Messages

FlexBuilder 3 not stopping at Break Points

Hi ,
when i am putting BreakPoints on to FlexBuilder on to DebugPerspective , its not stopping at Break Points , please let me know what do i need to install for this to stop at Break Points ??
Please find the screenshot attached of the related error .
Thanks in advance .

Hi,
Check your Run/Debug settings. Make sure that the launched file is the same as the one in the settings page.

The Arch Linux Folding@Home team breaks 3 million points

The Arch Linux Folding@Home team breaks 3 million points and is ranked 318 out of 81,260 teams.
http://folding.extremeoverclocking.com/ … s=&t=45032
Not bad for a team that averages between 20 and 25 active folders!
Thanks and Congrats to everyone who has folded for Arch.
Pudge

alexmat wrote:
Please post your results, I would be very interested in getting the SMP client setup.
Also, a nice package wouldn't hurt
In my case, I run all my folding computers at home, and it's just me and my wife. So the computers are running in a trusted environment. As such, I just manually start the client in a Gnome terminal window on desktop #4 and leave my computer logged in all the time. When I need to log out of my Gnome session, reboot, or stop my computer, I get into Desktop #4 and enter Ctrl-C to stop the client. This is the simplest way to run the client and works for me. When you use the client like this, a package isn't necessary.
Just download the Linux x86-64 only SMP client version 6.0 Beta 1 http://folding.stanford.edu/release/FAH … -Linux.tgz into a folder in your home directory. Use the tar command to untar the file, and you end up with two files named "fah6" and "mpiexec". This is the first Linux client that requires a passkey. Go to http://fah-web.stanford.edu/cgi-bin/getpasskey.py to get a passkey E-mailed to you. Once you get the passkey, get into your folding directory and as a user enter:
$ ./fah6 -configonly -smp
Answer the questions to configure how your client will run. If you have never run folding at home before, you need to choose a user name. Go to http://fah-web.stanford.edu/cgi-bin/mai … =userstats and using the "is exactly" option or the "is like" option enter your chosen user name in the search box and see if someone else is already using that name. Keep trying user names until you find one not in use. Enter your user name. The Arch Linux team number is 45032 so enter that for the team number. Enter the passkey that Stanford E-mailed you. I recommend the following for these questions:
User name [Anonymous]? Your_user_name
Team Number [0]? 45032
Passkey []? XXXXXXXXXXXXXXXXXXXXX
Ask before fetching/sending work (no/yes) [no]? no
Use proxy (yes/no) [no]? no
Acceptable size of work assignment and work result packets (bigger units may have large memory demands)
-- 'small' is <5MB, 'normal' is <10MB, and 'big' is >10MB (small/normal/big) [normal]? big
Change advanced options (yes/no) [no]? yes
Core Priority (idle/low) [idle]? idle
Disable highly optimized assembly code (no/yes) [no]? no
Interval, in minutes, between checkpoints (3-30) [15]? 15
Memory, in MB, to indicate (1885 available) [1885]? 1885
Set -advmethods flag always, requesting new advanced
scientific cores and/or work units if available (no/yes) [no]? yes
Ignore any deadline information (mainly useful if
system clock frequently has errors) (no/yes) [no]? no
Machine ID (1-16) [1]? 1
That's it, you are now configured. Now that it is configured, enter:
$ ./fah6 -smp
and you are off and running. Just remember to use the -smp flag when starting the client, and remember to use Ctrl-C to stop it.
dmartins wrote:I have noticed that the SMP client works much better on a linux dual core system than it does on a windows system with similar specs.
I agree totally with that.
Btw, Pudge: You seem to be way out in front of everyone else in points per day. I was wondering what machines you have churning away. Perhaps a PS3 in the mix? I have read they can pump out some serious GFLOPS.
No, I don't have a PS3. Here's what I have churning away.
Four SMP clients on AMD Athlon 64 X2 Dual Core Processors running Arch 64 bit.
One SMP client on an AMD Athlon 64 X2 Dual Core Processor running Windows XP
Three regular clients (non SMP) on AMD Athlon XP single core processors running i686 Arch
One regular client (non SMP) on an AMD Athlon XP single core processor running Windows XP
The vast majority of my points come from the 5 SMP clients. It's absolutely amazing how fast the SMP client can finish the work units!
If you have a dual core processor, I highly recommend running a single SMP client as opposed to running two regular clients.
EDIT: I forgot to mention. To run the Linux X86_64 SMP client Version 5 beta, you needed some 32 bit libraries loaded. I just loaded all the 32 bit libraries listed in the installing Flash on Arch64 Wiki and it worked. When I went to the Linux X86_64 SMP client Version 6 beta 1, I just left the 32 bit libraries in place as I am using them for nspluginwrapper anyway. So, I have not tested whether the Linux X86_64 SMP client Version 6 beta 1 still needs the 32 bit libraries or not.
Pudge
Last edited by Pudge (2007-09-29 04:54:05)

"Do not include a break inside the TD tag" is ignored

In Edit | Preferences | Code Format in DW CS5, the setting "Do not include a break inside the TD tag" is ticked but DW is still putting a line break in the tag like this...
<td> </td>
Any idea why the setting is being ignored?
Malcolm

Artisan Internet wrote:
Both fair comments, many thanks. The reason I want to remove the space is because it's impossible to have an empty row with a height of less than about 6 pixels (used as a spacer or for coloured divider lines of different thicknesses) when there's a space within the TD tag. The space counts as a character which means that the row can't be less than the height of a character.
I know I could make a transparent spacer GIF, and create custom styles for different horizontal rules in the stylesheet, but it's always been a lot quicker to simply use a table row with a height.
Looks like I'll just have to carry on deleting the spaces from the code.
Malcolm
Your best solution is to insert a transparent spacer.gif and give it the dimensions you want. That will overrule all the 'empty' defaults. Please remember, the spacer need only be in one cell of the row. All other cells, unless they have larger content, will follow suit... applies to rows and columns.
(The 'height' attribute by itself, as you've discovered, is kind of dicey. So is the width.)

How to recover from D recovery drive that is not in the recovery point list

I got problem when I created a recovery point, this removed previous created or HP manufactory recovery.
then I use other tool make this recovery disk back. now because it is not in the recovery point, even though I can see the driver D, recovery is not work, what it said is access denied.
another problem is I alrerady update my notebook to Windows 8.1 Pro. would that default recovery back to Windows 8.1 Pro?

When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
The original factory installed operating system is what will be recovered to your computer, when you use the HP provided methods of recovering your computer. Try using the "F" key, associated with the HP Recover Manager, at power on. You may also try marking the "D:\HP Recovery" partition as active in the Windows Disk Management Console and rebooting the computer.
If the above didn't work and you didn't create your HP Recovery Media when you first setup your computer, please contact official HP Customer Support in your country / region, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer. Software may not be covered by the warranty and there may be a charge for the HP Recovery Media.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video?

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
Baffled in SB

What format of MPG is this? Is this an MPEG1 or MPEG2 video? How was the video created?

Output type for Delivery note missing for shipping point

Hi all,
   I have a plant setup to email delivery note which uses shipping point SGUS. Condition record is setup for this shipping point using Del Typ/Shipping Point /Plant. This uses the communication stragery ZINT.
The email works well for this shipping point. However, when delivery cannot be email using shipping point CHAL. I guess this plant has 2 shipping points (sgus and chal).
When delivery is created, output type for email is missing.   I already created condition rec
for LF/CHAL/plant 121. Still not working.
Can anyone pls provide any suggestions ASAP ?
Thanks
Joyce

Hi MdZ,
   I looked at the analysis output. ZD04 output is what i am after. Don't understand the followings:
Q1 - why the ordering in anaylsis is different than in output determination procedure. For example:
In Analysis Output: i have:
LDOO    - Output not found
MAIL     - manual output
PLOO    - Output not found
Z940    - Output found
ZBOL   - Output not found
ZD04   - OUTPUT NOT FOUND
The Output Determination Procedure as:
Step Counter   CType
10       1           LD00
12       1           ZLFX
13       0           LALE
14       1           ZBOL
20        2          MAIL
75       1           ZD04
90       1           PL00
110      1          Z940
Step 10 should be read , then step 12, and so on. Why is the ordering in procedure different than in
output analysis ?
Q2. Why did it display ZD04 not found when ZD04 appear on the delivery output as green light ? When i drill down, it show 2 access sequence. Access 10 stated Output found. Access 20 stated Output not found.
Thank you.
Joyce

Hi, I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on. But I zoom in.the waveform was not ended at Zero point. Why? In the audio file editork, "Snap Edits to Zero Crossings" option works fine.

Hi,
I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on.
But I zoom in、the waveform was not ended at Zero point.
Why?
In the audio file editork, "Snap Edits to Zero Crossings" option works fine.

correction needs to be made to step #14, I typed:
14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
Another Correction:
Originally read:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW.

I am using illustrator CC there are not showing scale size pointer in any object?

I am using illustrator CC there are not showing scale size pointer in any object? Anyone tell me why it was does it? And how i can come again on that position?

Or maybe Cmd(Ctrl)-U which is the toggle for Smart Guides?

Photoshop CS4 is not tracking the mouse pointer when using various tools.

We have windows 7 Pro 32 bit using adobe CS4.
Core i5 and core i7 processor
4GB installed RAM
ATI 1GB 4570 Graphics card.
Also on various other hardware spec the same error.
The tool brush, pen or erase etc is not following the mouse pointer smoothly. There is a delay and if you attempt to draw quickly e.g a circle you instead get a jagged linepolygon shape. The writing is trailing the pointer by less than one second.
We have tried installing on a pc with no other software to test if there is a conflict and get the same error.
Can anyone advise what the resolution is.
Thanks

TrevorBurroughs wrote:
Hi, I got a brand new 15" MacBook Pro a week or so back and had problems with the trackpad - when I tap to select an item the mouse pointer "bounces" off the item I'm trying to select. It happens randomly - not every time. Very irritating. Supplier got me a replacement machine, and it's doing the same thing! Is anyone else experiencing this issue? I migrated all my data and settings from my old Mac Pro (2011 model, also running Mavericks) via Time Machine - could that have an impact? Not using any non-Apple power supplies or other devices. Any input would be welcomed.
Migrating user from one machine to another should not be a cause of your symptoms.
Curious two machines in a row. Did this happen before you transferred data/ or di you check.
You have 14 days to return/exchange if you are not satisfied.
You could Try resetting NVRAM/PRAM http://support.apple.com/kb/ht1379 but I don't see it.
Did you try making adjustments to trackpad settings
>Sys Pref>Trackpad> Point & Click>speed

How could I config a Delivery Notes for a shipping point ?

Hi Experts!
I need to config a new delivery notes especially to tie a shipping point and a revenue channel...do you know how to proceed??
Actually, my client already have a delivery note for a shipping point and a revenue channel, but now I need to create another type of delivery note with other number range for a different shipping point and revenue channel...
I do not know the path in spro neither if I need to use a Tcode transaction....
Please let

the path is for creating new delivery types which can be processed thru txn vl01n, vl10b etc. when you want different delivery types to handle differnt sales document types.to deal with say free samples exports sales from depots etc differently.
you must be meaning the output from vl03 , is it?

My trackpad is not final and the pointer jumps around the screen

my trackpad is not final and the pointer jumps around the screen I wonder if physical or software problems
my macbook pro is 13 mid 2012 model: MacBookPro9, 2
so mountan lion
About a week ago I have this problem and I worry as much care and not my mac n golpiad never fallen so surprise me either physical appreciate your response as soon as possible

this happened to me and what i did was let it go flat and then charge it and it worked. i dont know if this will help but this is what i did when my phone went black.

I created a movie in elements 11, now the cti will not stop at end point, how to fix this?

I created a movie and now the CTI will not stop at end point. How to fix this?

Timeline too long (orphans) http://forums.adobe.com/thread/652216?tstart=30

Could not find the entry point in the procedure sqlite3_wal_checkpoint sqlite3.dll dynamic link library., Could not find the entry point in the procedure sqlite3_wal_checkpoint sqlite3.dll dynamic link library.

Could not find the entry point in the procedure sqlite3_wal_checkpoint sqlite3.dll dynamic link library.

Could not find the entry point in the procedure sqlite3_wal_checkpoint sqlite3.dll dynamic link library.
Try uninstalling your MobileMe control panel for Windows.

The \System Root\System32\drivers\NatMotion.sys device could not locate the entry point IoSetDeviceInterfaceState in driver ntoskernal.exe

After installing version 5.1.1 of the Flexmotion driver, and installing f5 update, I got the following message after rebooting the system: The \System Root\System32\drivers\NatMotion.sys device could not locate the entry point IoSetDeviceInterfaceState in driver ntoskernal.exe. OS is Win NT. I see device in MAX , but can not initialise it, and cannot make firmware update.
I do not se device from NT system menager.

The instructions on the f5 update are not 100% explicit about what to do for NT. The NatMotion.sys file should not be replaced on NT systems, only on the specifically listed OSes. Uninstall and reinstall the 5.1.1 driver along with the f5 update, however only install the components that do not specifically mention a particular OS.
Regards,
Brent R.
Applications Engineer
National Instruments

I can not delete some power point files in the trash.help?

I can not delete some power point files in the trash.help?

Hi Gary,
The presentations were created originally with PowerPoint. I have been using them on both KeyNote and PowerPoint with no problem, even after updating to MountainLion. Problems started at the 10.8.3 upgrade. The installation was an upgrade form Lion. Yes I mean Open Office, I am able to open the presentation with Open Office and play it with no problems.
The presentation gets loaded by Power Point and the Power Point freezes. Key Note can not even load it. Stops 3/4 of the way. This happens with ALL my presentations.
I want to thank you for your help.
Leonardo

ZCL_IM_COM_PARTNER_BADI - not breaking on break point.

Similar Messages

Maybe you are looking for