Adadmin on 11i with two-node installation
I have two-node installation of 11.5.5.
Am I possible to use adadmin on both nodes at the same time (parallely)
Regards
Hi,
Can you please send me the doc to [email protected]
TIA,
Senthil Kumar.
Similar Messages
-
Two node installation with 2 concurrent managers..
Need your help. I have 12.1.1 Two node installation on Linux 5.9 with 64 bit.
Linux2- Database server + Concurrent manager
Linux1- Apps Node
Port - 8002 (port pool -2)
on my app node - linux1, I have 2 directories <SID>_linux1 and <SID>_linux2. First one is for primary apps node and second one is for 2nd concurrent manager. It is a shared directory structure. I have 2 questions:
1) If I run the autoconfig on Linux1, I can run all the services and connect to apache. However, If I run the autconfig on linux2, I will not be able to connect to web server (for a short time request will be sent to Linux1 and then it gets forwarded to Linux2 - even though Linux2 is not app server).
2) How do I run the second concurrent manager on LInux2? After I run the 2 concurrent manager, how do I test both concurrent managers are working?
Your help is much appreciated.Hi Hussein,
Thank you for the info. I was wondering whether the Linux2 concurrent manager was installed correctly or not. I went to xml file and found these entries and it made me think, it didn't install correctly because only concurrent manager should have been yes and the rest should be no. Isn't it? If it is wrong, how do I correct this?
<oa_system_config>
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
<config_option type="techstack" oa_var="s_techstack">as1013</config_option>
<config_option type="techstack" oa_var="s_tnsmode">generateTNS</config_option>
<config_option type="adx" oa_var="s_apps_version">12.1.1</config_option>
<config_option type="techstack" oa_var="s_apache_mode">NORMAL</config_option>
<ias_version oa_var="s_ias_version">10.1.3.4.0</ias_version>
</oa_system_config> -
Do someone knows how to create a cluster with two nodes on oracle VM Ware
dear members,
can someone guide us through creating a cluster with two nodes on oracle VM. it will be nice if we can virtualiza RAC, atleast for education purposes.
Thank you all in advanceHere is an excellent article that explains how to do this:
http://startoracle.com/2007/09/30/so-you-want-to-play-with-oracle-11gs-rac-heres-how/ -
Hi All,
I have to do two node R12 installation, please guide me how to procede because I could not see any option like "Sinlge node " and "Mult node" as it was in 11i, I want to have my database on one server and my application on second server
RegdsHi
I am new to Oracle E-business suite. I am trying to install R12 on single node/sincgle user istall on Linux 32bit. I followed the Oracle Doc ID:4012310.1 and follwoing the instructions from http://download-east.oracle.com/docs/cd/B40089_09/current/acrobat/120oaig.pdf.
I created stage area by extracting the files downloaded from Oracle edelivery site.
Created user "Oracle" and gave permissions to access stageR12 directory.
Logged in as Oracle and try to run ./rapidwiz throws the follwoing error:
Rapid Install wizard is validating your filesystem.....
4 DVD labels found
Rapid install wizard will now launch the java interface .....
[oracle@localhost rapidwiz]$ Exceprion in the thread "main" java.lang.noclassdeffounderror:
Orcle/apps/ad/util/logfile
at oracle.apps.as.rapidwiz.RIWizard.main(RIWIZard.java.1419)
Please help
Thanks
Raj -
Election problem after repeated split-brains with two nodes
Hi
I'm using a customized source based on BDB-5.1.19 (excxx_repquote)
with two site one - MASTER and the other SLAVE...
nsite=2
ack=quorum
- the master is writing to quotedb at a rate of 10 txn per sec
- the test consist to isolate the client from the master (split brain) and reconnect it after a random time include from 1sec to 10sec
the test run well about 10 times but at a moment the process slave receive DB_EVENT_REP_ELECTION_FAILED
and the master enter in election mode and never exit from the CLIENT mode. I must say that to freeze the client I decide to kill me (kill -9 my pid) when I receive such event...
here is the verbose log on the master...
[1307872770:871621][6510/47655809107168] MASTER: rep_send_function returned: 110
[1307872770:973655][6510/47655809107168] MASTER: bulk_msg: Send buffer after copy due to PERM
[1307872770:973667][6510/47655809107168] MASTER: send_bulk: Send 266 (0x10a) bulk buffer bytes
[1307872770:973672][6510/47655809107168] MASTER: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 68 eid -1, type bulk_log, LSN [21][986648] perm
[1307872770:973693][6510/47655809107168] MASTER: will await acknowledgement: need 1
[1307872771:26623][6510/47655809107168] MASTER: rep_send_function returned: 110
[1307872771:126380][6510/1162996032] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type log, LSN [21][946345]
[1307872771:126407][6510/1162996032] MASTER: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 68 eid -1, type dupmaster, LSN [0][0] nobuf
[1307872771:126695][6510/1162996032] MASTER: rep_start: Found old version log 17
[1307872771:126753][6510/1162996032] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 68 eid -1, type newclient, LSN [0][0] nobuf
[1307872771:126833][6510/1183975744] CLIENT: starting election thread
[1307872771:126876][6510/1183975744] CLIENT: Start election nsites 2, ack 1, priority 100
[1307872771:126890][6510/1183975744] CLIENT: Election thread owns egen 69
[1307872771:127423][6510/1173485888] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type newclient, LSN [0][0]
[1307872771:130079][6510/1183975744] CLIENT: Tallying VOTE1[0] (2147483647, 69)
[1307872771:130113][6510/1183975744] CLIENT: Beginning an election
[1307872771:130134][6510/1183975744] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 68 eid -1, type vote1, LSN [21][986728] nobuf
[1307872771:130147][6510/1173485888] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 68 eid -1, type master_req, LSN [0][0] nobuf
[1307872771:130438][6510/1152506176] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote1, LSN [21][946437]
[1307872771:130460][6510/1162996032] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type alive, LSN [21][986728]
[1307872771:130467][6510/1152506176] CLIENT: Updating gen from 68 to 70
[1307872771:130482][6510/1162996032] CLIENT: Received ALIVE egen of 71, mine 69
[1307872771:130503][6510/1162996032] CLIENT: Election finished in 0.003602000 sec
[1307872771:130515][6510/1162996032] CLIENT: Election done; egen 70
[1307872771:130534][6510/1152506176] CLIENT: Received vote1 egen 71, egen 71
[1307872771:130581][6510/1152506176] CLIENT: Tallying VOTE1[0] (0, 71)
[1307872771:130593][6510/1089075520] CLIENT: starting election thread
[1307872771:130619][6510/1152506176] CLIENT: Incoming vote: (eid)0 (pri)100 ELECTABLE (gen)70 (egen)71 [21,946437]
[1307872771:130642][6510/1152506176] CLIENT: Not in election, but received vote1 0x282c 0x8
[1307872771:130674][6510/1089075520] CLIENT: Start election nsites 2, ack 1, priority 100
[1307872771:130692][6510/1089075520] CLIENT: Election thread owns egen 71
[1307872771:130704][6510/1194465600] CLIENT: starting election thread
[1307872771:130733][6510/1194465600] CLIENT: Start election nsites 2, ack 1, priority 100
[1307872771:132922][6510/1089075520] CLIENT: Tallying VOTE1[1] (2147483647, 71)
[1307872771:132949][6510/1089075520] CLIENT: Accepting new vote
[1307872771:132958][6510/1089075520] CLIENT: Beginning an election
[1307872771:132973][6510/1089075520] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid -1, type vote1, LSN [21][986728] nobuf
[1307872771:132985][6510/1194465600] CLIENT: election thread is exiting
[1307872771:133012][6510/1089075520] CLIENT: Tallying VOTE2[0] (2147483647, 71)
[1307872771:133037][6510/1089075520] CLIENT: Counted my vote 1
[1307872771:133048][6510/1089075520] CLIENT: Skipping phase2 wait: already got 1 votes
[1307872771:133060][6510/1089075520] CLIENT: Got enough votes to win; election done; (prev) gen 70
[1307872771:133071][6510/1089075520] CLIENT: Election finished in 0.002367000 sec
[1307872771:133084][6510/1089075520] CLIENT: Election done; egen 72
[1307872771:133111][6510/1089075520] CLIENT: Ended election with 0, e_th 1, egen 72, flag 0x2a2c, e_fl 0x0, lo_fl 0x6
[1307872771:133170][6510/1173485888] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type alive, LSN [0][0]
[1307872771:133187][6510/1173485888] CLIENT: Racing replication msg lockout, ignore message.
[1307872771:173744][6510/1162996032] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote2, LSN [0][0]
[1307872771:173769][6510/1162996032] CLIENT: Racing replication msg lockout, ignore message.
[1307872771:231593][6510/1183975744] CLIENT: Ended election with 0, e_th 0, egen 72, flag 0x2a2c, e_fl 0x0, lo_fl 0x1c
[1307872771:231629][6510/1183975744] CLIENT: election thread is exiting
[1307872777:443794][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307872971:644194][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307873165:844583][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307873360:44955][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307873554:245347][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307873748:445736][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307873942:646117][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307874136:846509][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
.... and infinite stay to this situation
My question is why the Master is suddenly transformed into CLIENT and why it's never returning to the MASTER
Thanks in advance ...
here is the log for the client
[1307872315:455113][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type log, LSN [21][984396]
[1307872315:455134][1282/1160603968] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type log, LSN [21][984483] perm
[1307872315:609962][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][984733] perm
[1307872315:764958][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][984986] perm
[1307872315:919962][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][985238] perm
[1307872316:75018][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][985491] perm
[1307872316:229959][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][985741] perm
[1307872316:384949][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][985993] perm
[1307872316:499899][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][986141] perm
[1307872316:539895][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type log, LSN [21][986221]
[1307872316:540078][1282/1171093824] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type log, LSN [21][986307]
[1307872316:540100][1282/1160603968] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type log, LSN [21][986394] perm
[1307872316:694950][1282/1171093824] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][986648] perm
[1307872316:847349][1282/1129134400] MASTER: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid -1, type log, LSN [21][946345]
[1307872316:847698][1282/1171093824] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type dupmaster, LSN [0][0]
[1307872316:847999][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type newclient, LSN [0][0]
[1307872316:848168][1282/1171093824] MASTER: rep_start: Found old version log 17
[1307872316:848222][1282/1181583680] CLIENT: Racing replication msg lockout, ignore message.
[1307872316:848398][1282/1171093824] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid -1, type newclient, LSN [0][0] nobuf
[1307872316:848504][1282/1192073536] CLIENT: starting election thread
[1307872316:848542][1282/1192073536] CLIENT: Start election nsites 2, ack 1, priority 100
[1307872316:848566][1282/1192073536] CLIENT: Election thread owns egen 71
[1307872316:849634][1282/1192073536] CLIENT: Tallying VOTE1[0] (2147483647, 71)
[1307872316:849654][1282/1192073536] CLIENT: Beginning an election
[1307872316:849680][1282/1192073536] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid -1, type vote1, LSN [21][946437] nobuf
[1307872316:851403][1282/1160603968] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type vote1, LSN [21][986728]
[1307872316:851448][1282/1160603968] CLIENT: Received vote1 egen 69, egen 71
[1307872316:851470][1282/1160603968] CLIENT: Received old vote 69, egen 71, ignoring vote1
[1307872316:851481][1282/1160603968] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, type alive, LSN [21][986728] nobuf
[1307872316:851538][1282/1171093824] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type master_req, LSN [0][0]
[1307872316:851558][1282/1171093824] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, type alive, LSN [0][0] nobuf
[1307872316:854254][1282/1160603968] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote1, LSN [21][986728]
[1307872316:854275][1282/1160603968] CLIENT: Received vote1 egen 71, egen 71
[1307872316:854317][1282/1160603968] CLIENT: Tallying VOTE1[1] (0, 71)
[1307872316:854339][1282/1160603968] CLIENT: Incoming vote: (eid)0 (pri)100 ELECTABLE (gen)70 (egen)71 [21,986728]
[1307872316:854353][1282/1160603968] CLIENT: Existing vote: (eid)2147483647 (pri)100 (gen)70 (sites)2 [21,946437]
[1307872316:854369][1282/1160603968] CLIENT: Accepting new vote
[1307872316:854379][1282/1160603968] CLIENT: Phase1 election done
[1307872316:854395][1282/1160603968] CLIENT: Voting for 0
[1307872316:854407][1282/1160603968] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, type vote2, LSN [0][0] nobuf
[1307872317:960344][1282/1192073536] CLIENT: After phase 2: votes 0, nvotes 1, nsites 2
[1307872317:960389][1282/1192073536] CLIENT: Election finished in 1.111809000 sec
[1307872317:960401][1282/1192073536] CLIENT: Election done; egen 72
[1307872317:960412][1282/1192073536] CLIENT: Ended election with -30974, e_th 0, egen 72, flag 0x282c, e_fl 0x0, lo_fl 0x0
Kill me !!
--- my source
on the master I run manually :
txn_rate 1
loop_rate 10
loop 1 20000
* See the file LICENSE for redistribution information.
* Copyright (c) 2001, 2010 Oracle and/or its affiliates. All rights reserved.
* $Id$
* In this application, we specify all communication via the command line. In
* a real application, we would expect that information about the other sites
* in the system would be maintained in some sort of configuration file. The
* critical part of this interface is that we assume at startup that we can
* find out
* 1) what our Berkeley DB home environment is,
* 2) what host/port we wish to listen on for connections; and
* 3) an optional list of other sites we should attempt to connect to.
* These pieces of information are expressed by the following flags.
* -h home (required; h stands for home directory)
* -l host:port (required; l stands for local)
* -C or -M (optional; start up as client or master)
* -r host:port (optional; r stands for remote; any number of these may be
* specified)
* -R host:port (optional; R stands for remote peer; only one of these may
* be specified)
* -a all|quorum (optional; a stands for ack policy)
* -b (optional; b stands for bulk)
* -n nsites (optional; number of sites in replication group; defaults to 0
* to try to dynamically compute nsites)
* -p priority (optional; defaults to 100)
* -v (optional; v stands for verbose)
#include <cstdlib>
#include <cstring>
#include <iostream>
#include <string>
#include <sstream>
#include <sys/types.h>
#include <signal.h>
#include <db_cxx.h>
#include "RepConfigInfo.h"
#include "dbc_auto.h"
using std::cout;
using std::cin;
using std::cerr;
using std::endl;
using std::ends;
using std::flush;
using std::istream;
using std::istringstream;
using std::ostringstream;
using std::string;
using std::getline;
#include <stdio.h>
#include <readline/readline.h>
#include <readline/history.h>
#define CACHESIZE (10 * 1024 * 1024)
#define DATABASE "quote.db"
#define DATABASE2 "quote2.db"
const char *progname = "excxx_repquote";
#include <errno.h>
#ifdef _WIN32
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
#define snprintf _snprintf
#define sleep(s) Sleep(1000 * (s))
extern "C" {
extern int getopt(int, char * const *, const char *);
extern char *optarg;
typedef HANDLE thread_t;
typedef DWORD thread_exit_status_t;
#define thread_create(thrp, attr, func, arg) \
(((*(thrp) = CreateThread(NULL, 0, \
(LPTHREAD_START_ROUTINE)(func), (arg), 0, NULL)) == NULL) ? -1 : 0)
#define thread_join(thr, statusp) \
((WaitForSingleObject((thr), INFINITE) == WAIT_OBJECT_0) && \
GetExitCodeThread((thr), (LPDWORD)(statusp)) ? 0 : -1)
#else /* !_WIN32 */
#include <pthread.h>
typedef pthread_t thread_t;
typedef void* thread_exit_status_t;
#define thread_create(thrp, attr, func, arg) \
pthread_create((thrp), (attr), (func), (arg))
#define thread_join(thr, statusp) pthread_join((thr), (statusp))
#endif
// Struct used to store information in Db app_private field.
typedef struct {
bool app_finished;
bool in_client_sync;
bool is_master;
bool no_dummy_wr;
} APP_DATA;
static void log(const char *);
void checkpoint_thread (void );
void log_archive_thread (void );
void dummy_write_thread (void );
class RepQuoteExample {
public:
RepQuoteExample();
void init(RepConfigInfo* config);
void doloop();
int terminate();
static void event_callback(DbEnv* dbenv, u_int32_t which, void *info);
void print_stocks_size(Db *dbp);
private:
// disable copy constructor.
RepQuoteExample(const RepQuoteExample &);
void operator = (const RepQuoteExample &);
// internal data members.
APP_DATA app_data;
RepConfigInfo *app_config;
DbEnv cur_env;
thread_t ckp_thr;
thread_t lga_thr;
thread_t dmy_thr;
// private methods.
void print_stocks(Db *dbp);
void print_env(DbEnv *dbenv);
void prompt();
RepQuoteExample *g_runner=NULL;
RepConfigInfo *g_config=NULL;
class DbHolder {
public:
DbHolder(DbEnv env, const char _dbname) : env(env)
dbp = 0;
if (_dbname) dbname=_dbname;
else dbname=DATABASE;
~DbHolder() {
try {
close();
} catch (...) {
// Ignore: this may mean another exception is pending
bool ensure_open(bool creating) {
if (dbp)
return (true);
dbp = new Db(env, 0);
u_int32_t flags = DB_AUTO_COMMIT;
if (creating)
flags |= DB_CREATE;
try {
//dbp->open(NULL, DATABASE, NULL, DB_BTREE, flags, 0);
//dbp->open(NULL, dbname, NULL, DB_BTREE, flags, 0);
dbp->open(NULL, NULL, dbname, DB_BTREE, flags, 0);
return (true);
} catch (DbDeadlockException e) {
} catch (DbRepHandleDeadException e) {
} catch (DbException e) {
if (e.get_errno() == DB_REP_LOCKOUT) {
// Just fall through.
} else if (e.get_errno() == ENOENT && !creating) {
// Provide a bit of extra explanation.
log("Stock DB does not yet exist");
} else
throw;
// (All retryable errors fall through to here.)
log("please retry the operation");
close();
return (false);
void close() {
if (dbp) {
try {
dbp->close(0);
delete dbp;
dbp = 0;
} catch (...) {
delete dbp;
dbp = 0;
throw;
operator Db *() {
return dbp;
Db *operator->() {
return dbp;
private:
Db *dbp;
DbEnv *env;
const char *dbname;
class StringDbt : public Dbt {
public:
#define GET_STRING_OK 0
#define GET_STRING_INVALID_PARAM 1
#define GET_STRING_SMALL_BUFFER 2
#define GET_STRING_EMPTY_DATA 3
int get_string(char **buf, size_t buf_len)
size_t copy_len;
int ret = GET_STRING_OK;
if (buf == NULL) {
cerr << "Invalid input buffer to get_string" << endl;
return GET_STRING_INVALID_PARAM;
// make sure the string is null terminated.
memset(*buf, 0, buf_len);
// if there is no string, just return.
if (get_data() == NULL || get_size() == 0)
return GET_STRING_OK;
if (get_size() >= buf_len) {
ret = GET_STRING_SMALL_BUFFER;
copy_len = buf_len - 1; // save room for a terminator.
} else
copy_len = get_size();
memcpy(*buf, get_data(), copy_len);
return ret;
size_t get_string_length()
if (get_size() == 0)
return 0;
return strlen((char *)get_data());
void set_string(char *string)
set_data(string);
set_size((u_int32_t)strlen(string));
StringDbt(char *string) :
Dbt(string, (u_int32_t)strlen(string)) {};
StringDbt() : Dbt() {};
~StringDbt() {};
// Don't add extra data to this sub-class since we want it to remain
// compatible with Dbt objects created internally by Berkeley DB.
Db *g_repquote=NULL;
RepQuoteExample::RepQuoteExample() : app_config(0), cur_env(0) {
app_data.app_finished = 0;
app_data.in_client_sync = 0;
app_data.is_master = 0; // assume I start out as client
app_data.no_dummy_wr = 0 ; //prevent to run dummy write
int (*old_rep_process_message)
__P((DB_ENV *, DBT *, DBT *, int, DB_LSN *));
int my_rep_process_message __P((DB_ENV arg1, DBT arg2, DBT arg3, int arg4, DB_LSN arg5))
printf("EZ->>> my_rep_process_message:%p\n",arg5);
old_rep_process_message(arg1,arg2,arg3,arg4,arg5);
void RepQuoteExample::init(RepConfigInfo *config) {
app_config = config;
cur_env.set_app_private(&app_data);
cur_env.set_errfile(stderr);
app_data.no_dummy_wr=config->no_dummy_wr;
if (app_data.no_dummy_wr)
printf("No dummy !!!\n");
//EZ->cur_env.set_errpfx(progname);
cur_env.set_event_notify(event_callback);
// Configure bulk transfer to send groups of records to clients
// in a single network transfer. This is useful for master sites
// and clients participating in client-to-client synchronization.
if (app_config->bulk)
cur_env.rep_set_config(DB_REP_CONF_BULK, 1);
// Set the total number of sites in the replication group.
// This is used by repmgr internal election processing.
if (app_config->totalsites > 0)
cur_env.rep_set_nsites(app_config->totalsites);
// Turn on debugging and informational output if requested.
if (app_config->verbose)
cur_env.set_verbose(DB_VERB_REPLICATION, 1);
cur_env.set_verbose(DB_VERB_REPMGR_MISC, 1);
cur_env.set_verbose(DB_VERB_RECOVERY, 1);
cur_env.set_verbose(DB_VERB_REPLICATION, 1);
cur_env.set_verbose(DB_VERB_REP_ELECT, 1);
cur_env.set_verbose(DB_VERB_REP_LEASE, 1);
cur_env.set_verbose(DB_VERB_REP_SYNC, 1);
cur_env.set_verbose(DB_VERB_REPMGR_MISC, 1);
// Set replication group election priority for this environment.
// An election first selects the site with the most recent log
// records as the new master. If multiple sites have the most
// recent log records, the site with the highest priority value
// is selected as master.
cur_env.rep_set_priority(app_config->priority);
// Set the policy that determines how master and client sites
// handle acknowledgement of replication messages needed for
// permanent records. The default policy of "quorum" requires only
// a quorum of electable peers sufficient to ensure a permanent
// record remains durable if an election is held. The "all" option
// requires all clients to acknowledge a permanent replication
// message instead.
cur_env.repmgr_set_ack_policy(app_config->ack_policy);
// Set the threshold for the minimum and maximum time the client
// waits before requesting retransmission of a missing message.
// Base these values on the performance and load characteristics
// of the master and client host platforms as well as the round
// trip message time.
cur_env.rep_set_request(20000, 500000);
// Configure deadlock detection to ensure that any deadlocks
// are broken by having one of the conflicting lock requests
// rejected. DB_LOCK_DEFAULT uses the lock policy specified
// at environment creation time or DB_LOCK_RANDOM if none was
// specified.
cur_env.set_lk_detect(DB_LOCK_DEFAULT);
// The following base replication features may also be useful to your
// application. See Berkeley DB documentation for more details.
// - Master leases: Provide stricter consistency for data reads
// on a master site.
// - Timeouts: Customize the amount of time Berkeley DB waits
// for such things as an election to be concluded or a master
// lease to be granted.
// - Delayed client synchronization: Manage the master site's
// resources by spreading out resource-intensive client
// synchronizations.
// - Blocked client operations: Return immediately with an error
// instead of waiting indefinitely if a client operation is
// blocked by an ongoing client synchronization.
cur_env.repmgr_set_local_site(app_config->this_host.host,
app_config->this_host.port, 0);
for ( REP_HOST_INFO *cur = app_config->other_hosts; cur != NULL;
cur = cur->next) {
cur_env.repmgr_add_remote_site(cur->host, cur->port,
NULL, cur->peer ? DB_REPMGR_PEER : 0);
// Configure heartbeat timeouts so that repmgr monitors the
// health of the TCP connection. Master sites broadcast a heartbeat
// at the frequency specified by the DB_REP_HEARTBEAT_SEND timeout.
// Client sites wait for message activity the length of the
// DB_REP_HEARTBEAT_MONITOR timeout before concluding that the
// connection to the master is lost. The DB_REP_HEARTBEAT_MONITOR
// timeout should be longer than the DB_REP_HEARTBEAT_SEND timeout.
cur_env.rep_set_timeout(DB_REP_HEARTBEAT_SEND, 5000000);
cur_env.rep_set_timeout(DB_REP_HEARTBEAT_MONITOR, 10000000);
// The following repmgr features may also be useful to your
// application. See Berkeley DB documentation for more details.
// - Two-site strict majority rule - In a two-site replication
// group, require both sites to be available to elect a new
// master.
// - Timeouts - Customize the amount of time repmgr waits
// for such things as waiting for acknowledgements or attempting
// to reconnect to other sites.
// - Site list - return a list of sites currently known to repmgr.
// We can now open our environment, although we're not ready to
// begin replicating. However, we want to have a dbenv around
// so that we can send it into any of our message handlers.
cur_env.set_cachesize(0, CACHESIZE, 0);
cur_env.set_flags(DB_REP_PERMANENT, 1);
//cur_env.set_flags(DB_TXN_WRITE_NOSYNC, 1);
/* u_int32_t maxlocks=300000;
if (maxlocks != 0)
cur_env.set_lk_max_locks(maxlocks);
u_int32_t maxlocks_o=300000;
if (maxlocks_o != 0)
cur_env.set_lk_max_objects(maxlocks_o);
u_int32_t maxmutex=300000;
if (maxmutex != 0)
cur_env.mutex_set_max(maxmutex);
DbEnv *m_env=&cur_env;
m_env->set_flags(DB_TXN_NOSYNC, 1);
m_env->set_lk_max_lockers(60000);
m_env->set_lk_max_objects(60000);
m_env->set_lk_max_locks(60000);
m_env->set_tx_max(60000);
//m_env->repmgr_set_ack_policy(DB_REPMGR_ACKS_NONE);
m_env->rep_set_timeout(DB_REP_ACK_TIMEOUT, 50 * 1000); //50ms
m_env->rep_set_timeout(DB_REP_CHECKPOINT_DELAY, 0);
//m_env->rep_set_timeout(DB_REP_CONNECTION_RETRY, 30 * 1000 * 1000); // 30 seconds
m_env->rep_set_timeout(DB_REP_ELECTION_TIMEOUT, 1 * 1000 * 1000); // 5 seconds
m_env->rep_set_timeout(DB_REP_FULL_ELECTION_TIMEOUT, 5 * 1000 * 1000); // 5 seconds
m_env->rep_set_timeout(DB_REP_CONNECTION_RETRY, 5 * 1000 * 1000);
//m_env->rep_set_timeout(DB_REP_ELECTION_RETRY, 10 * 1000 * 1000); //10 seconds
//m_env->rep_set_timeout(DB_REP_HEARTBEAT_MONITOR, 80 * 1000 * 1000); //80 seconds
//m_env->rep_set_timeout(DB_REP_HEARTBEAT_SEND, 500 * 1000); //500 milli seconds
//The minimum number of microseconds a client waits before requesting retransmission
u_int32_t rep_req_min = 40000; //40 000 microsec = 40 mili
//The maximum number of microseconds a client waits before requesting retransmission
u_int32_t rep_req_max = 1280000;// 1 280 000 microsec = 1.28 sec
u_int32_t rep_limit_gbytes = 0;
u_int32_t rep_limit_bytes = 100 * 1024 * 1024; // 100MB
m_env->rep_set_request(rep_req_min, rep_req_max);
m_env->rep_set_limit(rep_limit_gbytes, rep_limit_bytes);
cur_env.open(app_config->home, DB_CREATE | DB_RECOVER |
DB_THREAD | DB_INIT_REP | DB_INIT_LOCK | DB_INIT_LOG |
DB_INIT_MPOOL | DB_INIT_TXN , 0);
//keep old function for chain
//old_rep_process_message=cur_env.get_DB_ENV()->rep_process_message;
//derouting
//cur_env.get_DB_ENV()->rep_process_message=my_rep_process_message;
/*int _i;
cur_env.log_get_config(DB_LOG_DIRECT, &_i);printf ("DB_LOG_DIRECT = %d\n",_i);
cur_env.log_get_config(DB_LOG_DSYNC, &_i);printf ("DB_LOG_DSYNC = %d\n",_i);
cur_env.log_get_config(DB_LOG_AUTO_REMOVE, &_i);printf ("DB_LOG_AUTO_REMOVE = %d\n",_i);
cur_env.log_get_config(DB_LOG_IN_MEMORY, &_i);printf ("DB_LOG_IN_MEMORY = %d\n",_i);
cur_env.log_get_config(DB_LOG_ZERO,&_i);printf ("DB_LOG_ZERO = %d\n",_i);
// Start checkpoint and log archive support threads.
(void)thread_create(&ckp_thr, NULL, checkpoint_thread, &cur_env);
(void)thread_create(&lga_thr, NULL, log_archive_thread, &cur_env);
(void)thread_create(&dmy_thr, NULL, dummy_write_thread, &cur_env);
cur_env.repmgr_start(3, app_config->start_policy);
}int RepQuoteExample::terminate() {
try {
// Wait for checkpoint and log archive threads to finish.
// Windows does not allow NULL pointer for exit code variable.
thread_exit_status_t exstat;
(void)thread_join(lga_thr, &exstat);
(void)thread_join(ckp_thr, &exstat);
(void)thread_join(dmy_thr, &exstat);
// We have used the DB_TXN_NOSYNC environment flag for
// improved performance without the usual sacrifice of
// transactional durability, as discussed in the
// "Transactional guarantees" page of the Reference
// Guide: if one replication site crashes, we can
// expect the data to exist at another site. However,
// in case we shut down all sites gracefully, we push
// out the end of the log here so that the most
// recent transactions don't mysteriously disappear.
cur_env.log_flush(NULL);
cur_env.close(0);
} catch (DbException dbe) {
cout << "error closing environment: " << dbe.what() << endl;
return 0;
void RepQuoteExample::prompt() {
cout << "QUOTESERVER";
if (!app_data.is_master)
cout << "(read-only)";
cout << "> " << flush;
void log(const char *msg) {
time_t currentTime;
// get and print the current time
time (¤tTime); // fill now with the current time
char buff[255];
strncpy(buff,ctime(¤tTime),sizeof(buff));
char *p;
for(p =buff ; *p != '\n'; p++);
*p = '\0';
cerr << buff << " - " << msg << endl;
// Simple command-line user interface:
// - enter "<stock symbol> <price>" to insert or update a record in the
// database;
// - just press Return (i.e., blank input line) to print out the contents of
// the database;
// - enter "quit" or "exit" to quit.
void RepQuoteExample::doloop() {
DbHolder dbh1(&cur_env,DATABASE);
DbHolder dbh2(&cur_env,DATABASE2);
DbHolder *dbh=&dbh1;
DbTxn *txn;
string input;
bool truncate = false;
char *c;
using_history();
g_repquote=*dbh;
int loop_rate = 0;
int txn_rate = 500;
while (prompt(), /*getline(cin, input)*/c=readline(NULL)) {
input=std::string(c);
add_history(c);
free(c);
int start_loop = 0;
int end_loop = 0;
int start_loop_d = 0;
int end_loop_d = 0;
istringstream is(input);
string token1, token2, token3;
truncate = false;
start_loop = 0;
end_loop = 0;
// Read 0, 1 or 2 tokens from the input.
int count = 0;
if (is >> token1) {
count++;
if (is >> token2)
count++;
if (is >> token3)
count++;
if (count == 1) {
if (token1 == "truncate" ) {
truncate = true;
else if (token1 == "env" ){
print_env(&cur_env);
continue;
else if (token1 == "verbose" ) {
app_config->verbose = !app_config->verbose;
if (app_config->verbose)
cur_env.set_verbose(DB_VERB_REPLICATION, 1);
cur_env.set_verbose(DB_VERB_REPMGR_MISC, 1);
cur_env.set_verbose(DB_VERB_RECOVERY, 1);
cur_env.set_verbose(DB_VERB_REP_ELECT, 1);
cur_env.set_verbose(DB_VERB_REP_LEASE, 1);
cur_env.set_verbose(DB_VERB_REP_SYNC, 1);
cur_env.set_verbose(DB_VERB_REPMGR_MISC, 1);
log("verbose is on");
else
cur_env.set_verbose(DB_VERB_REPLICATION, 0);
cur_env.set_verbose(DB_VERB_REPMGR_MISC, 0);
cur_env.set_verbose(DB_VERB_RECOVERY, 0);
cur_env.set_verbose(DB_VERB_REP_ELECT, 0);
cur_env.set_verbose(DB_VERB_REP_LEASE, 0);
cur_env.set_verbose(DB_VERB_REP_SYNC, 0);
cur_env.set_verbose(DB_VERB_REPMGR_MISC, 0);
log("verbose is off");
continue;
else if (token1 == "print" ) {
print_stocks(*dbh);
count = 0;
else if (token1 == "db1" ) {
dbh=&dbh1;
g_repquote=*dbh;
log( "switch to Db1");
count = 0;
else if (token1 == "db2" ) {
dbh=&dbh2;
g_repquote=*dbh;
log( "switch to Db2");
count = 0;
else if (token1 == "exit" || token1 == "quit") {
app_data.app_finished = 1;
break;
} else {
log("Format: <stock> <price>");
continue;
else if (count == 2)
if (token1 == "loop_rate" ){
loop_rate = atoi(token2.c_str());
continue;
if (token1 == "txn_rate" ){
txn_rate = atoi(token2.c_str());
continue;
else if (count == 3)
if (token1 == "loop" ) {
start_loop = atoi(token2.c_str());
end_loop = start_loop + atoi(token3.c_str());
if (token1 == "delete" ) {
start_loop_d = atoi(token2.c_str());
end_loop_d = start_loop_d + atoi(token3.c_str());
// Here we know count is either 0 or 2, so we're about to try a
// DB operation.
// Open database with DB_CREATE only if this is a master
// database. A client database uses polling to attempt
// to open the database without DB_CREATE until it is
// successful.
// This DB_CREATE polling logic can be simplified under
// some circumstances. For example, if the application can
// be sure a database is already there, it would never need
// to open it with DB_CREATE.
if (!dbh->ensure_open(app_data.is_master))
continue;
try {
if (count == 0)
if (app_data.in_client_sync)
log( "Cannot read data during client initialization - please try again.");
else
print_stocks_size(*dbh);
else if (!app_data.is_master)
log("Can't update at client");
else {
if (truncate)
u_int32_t no_remove;
txn = NULL;
cur_env.txn_begin(NULL, &txn, DB_TXN_NOWAIT);
try
(*dbh)->truncate(txn, &no_remove, 0);
// commit
txn->commit(0);
txn = NULL;
} catch (DbException &e) {
std::cout << "Error on txn commit: " << e.what() << std::endl;
// } catch (DbDeadlockException &) {
if (txn != NULL)
(void)txn->abort();
// std::cout << "Error on txn commit: " << std::endl;
else if (start_loop)
int j=0;
for (int i=start_loop; i<=end_loop; i=i+txn_rate)
//transaction begin
txn = NULL;
cur_env.txn_begin(NULL, &txn, 0);
for (j=i; j<=end_loop && j<=(i+txn_rate); j++)
Dbt key, value;
std::string key1, value1;
std::stringstream sstrm;
sstrm << "key" << j << ends;
key1 = sstrm.str();
key.set_data((void *)key1.c_str());
key.set_size((u_int32_t)strlen(key1.c_str()));
sstrm.str("");
int payload = rand() + j;
sstrm << "price" << payload << ends;
value1 = sstrm.str();
value.set_data((void *)value1.c_str());
value.set_size((u_int32_t)strlen(value1.c_str()));
// Perform the database put
(*dbh)->put(txn, &key, &value, 0);
printf("Kill me !!\n");
kill(getpid(),-9);
exit(0);
try
// commit
txn->commit(0);
txn = NULL;
} catch (DbException &e) {
std::cout << "Error on txn commit: " << e.what() << std::endl;
if (loop_rate>0)
usleep(txn_rate * 1000 * 1000 / loop_rate);
else if (start_loop_d)
int j=0;
for (int i=start_loop_d; i<=end_loop_d; i=i+100)
//transaction begin
txn = NULL;
cur_env.txn_begin(NULL, &txn, 0);
for (j=i; j<=end_loop_d && j<=(i+100); j++)
Dbt key, value;
std::string key1, value1;
std::stringstream sstrm;
sstrm << "key" << j << ends;
key1 = sstrm.str();
key.set_data((void *)key1.c_str());
key.set_size((u_int32_t)strlen(key1.c_str()));
// Perform the database put
(*dbh)->del(txn, &key, 0);
try
// commit
txn->commit(0);
txn = NULL;
} catch (DbException &e) {
std::cout << "Error on txn commit: " << e.what() << std::endl;
else
const char *symbol = token1.c_str();
StringDbt key(const_cast<char*>(symbol));
const char *price = token2.c_str();
StringDbt data(const_cast<char*>(price));
(*dbh)->put(NULL, &key, &data, 0);
} catch (DbDeadlockException e) {
log("please retry the operation");
dbh->close();
} catch (DbRepHandleDeadException e) {
log("please retry the operation");
dbh->close();
} catch (DbException e) {
if (e.get_errno() == DB_REP_LOCKOUT) {
log("please retry the operation");
dbh->close();
} else
throw;
dbh->close();
void RepQuoteExample::event_callback(DbEnv* dbenv, u_int32_t which, void *info)
static char buf[256];
APP_DATA app = (APP_DATA)dbenv->get_app_private();
info = NULL; /* Currently unused. */
switch (which) {
case DB_EVENT_REP_CLIENT:
app->is_master = 0;
app->in_client_sync = 1;
sprintf(buf,"%s - %s",progname,"CLIENT");
//EZ->dbenv->set_errpfx(buf);
log("DB_EVENT_REP_CLIENT.");
break;
case DB_EVENT_REP_MASTER:
app->is_master = 1;
app->in_client_sync = 0;
sprintf(buf,"%s - %s",progname,"MASTER");
//EZ->dbenv->set_errpfx(buf);
log("DB_EVENT_REP_MASTER.");
break;
case DB_EVENT_REP_NEWMASTER:
log("DB_EVENT_REP_NEWMASTER.");
app->in_client_sync = 1;
break;
case DB_EVENT_REP_PERM_FAILED:
// Did not get enough acks to guarantee transaction
// durability based on the configured ack policy. This
// transaction will be flushed to the master site's
// local disk storage for durability.
log("DB_EVENT_REP_PERM_FAILED.");
log("Insufficient acknowledgements to guarantee transaction durability.");
break;
case DB_EVENT_REP_STARTUPDONE:
app->in_client_sync = 0;
log("DB_EVENT_REP_STARTUPDONE.");
break;
case DB_EVENT_REP_ELECTION_FAILED:
log("DB_EVENT_REP_ELECTION_FAILED.");
//g_runner->init(g_config);
printf("Kill me !!\n");
kill(getpid(),-9);
exit(0);
break;
case DB_EVENT_REP_DUPMASTER:
log("DB_EVENT_REP_DUPMASTER.");
break;
default:
dbenv->errx("ignoring event %d", which);
void RepQuoteExample::print_stocks_size(Db *dbp) {
DB_BTREE_STAT *statp;
dbp->stat(NULL, &statp, 0);
log("db_stat");
cout << "***************************************** >>>>>>>>>>> : database contains " << (u_long)statp->bt_ndata << " records\n";
void RepQuoteExample::print_env(DbEnv *dbenv) {
dbenv->stat_print(DB_STAT_ALL);
void RepQuoteExample::print_stocks(Db *dbp) {
StringDbt key, data;
#define MAXKEYSIZE 10
#define MAXDATASIZE 20
char keybuf[MAXKEYSIZE + 1], databuf[MAXDATASIZE + 1];
char kbuf, dbuf;
memset(&key, 0, sizeof(key));
memset(&data, 0, sizeof(data));
kbuf = keybuf;
dbuf = databuf;
DbcAuto dbc(dbp, 0, 0);
cout << "\tSymbol\tPrice" << endl
<< "\t======\t=====" << endl;
int no_records =0;
for (int ret = dbc->get(&key, &data, DB_FIRST);
ret == 0;
ret = dbc->get(&key, &data, DB_NEXT)) {
key.get_string(&kbuf, MAXKEYSIZE);
data.get_string(&dbuf, MAXDATASIZE);
no_records++;
cout << "\t" << keybuf << "\t" << databuf << endl;
cout << "********************** NO Records " << no_records << endl;
cout << endl << flush;
dbc.close();
static void usage() {
cerr << "usage: " << progname << " -h home -l host:port [-CM]"
<< "[-r host:port][-R host:port]" << endl
<< " [-a all|quorum][-b][-n nsites][-p priority][-v]" << endl;
cerr << "\t -h home (required; h stands for home directory)" << endl
<< "\t -l host:port (required; l stands for local)" << endl
<< "\t -C or -M (optional; start up as client or master)" << endl
<< "\t -r host:port (optional; r stands for remote; any "
<< "number of these" << endl
<< "\t may be specified)" << endl
<< "\t -R host:port (optional; R stands for remote peer; only "
<< "one of" << endl
<< "\t these may be specified)" << endl
<< "\t -a all|quorum (optional; a stands for ack policy)" << endl
<< "\t -b (optional; b stands for bulk)" << endl
<< "\t -n nsites (optional; number of sites in replication "
<< "group; defaults " << endl
<< "\t to 0 to try to dynamically compute nsites)" << endl
<< "\t -p priority (optional; defaults to 100)" << endl
<< "\t -v (optional; v stands for verbose)" << endl;
exit(EXIT_FAILURE);
int main(int argc, char **argv) {
RepConfigInfo config;
char ch, portstr, tmphost;
int tmpport;
bool tmppeer;
config.no_dummy_wr = false;
// Extract the command line parameters
while ((ch = getopt(argc, argv, "E:a:bCh:l:Mn:p:R:r:vw")) != EOF) {
tmppeer = false;
switch (ch) {
case 'a':
if (strncmp(optarg, "all", 3) == 0)
config.ack_policy = DB_REPMGR_ACKS_ALL;
else if (strncmp(optarg, "quorum", 6) != 0)
usage();
break;
case 'b':
config.bulk = true;
break;
case 'C':
config.start_policy = DB_REP_CLIENT;
break;
case 'E':
config.start_policy = DB_REP_ELECTION;
break;
case 'h':
config.home = optarg;
break;
case 'l':
config.this_host.host = strtok(optarg, ":");
if ((portstr = strtok(NULL, ":")) == NULL) {
cerr << "Bad host specification." << endl;
usage();
config.this_host.port = (unsigned short)atoi(portstr);
config.got_listen_address = true;
break;
case 'M':
config.start_policy = DB_REP_MASTER;
break;
case 'n':
config.totalsites = atoi(optarg);
break;
case 'p':
config.priority = atoi(optarg);
break;
case 'R':
tmppeer = true; // FALLTHROUGH
case 'r':
tmphost = strtok(optarg, ":");
if ((portstr = strtok(NULL, ":")) == NULL) {
cerr << "Bad host specification." << endl;
usage();
tmpport = (unsigned short)atoi(portstr);
config.addOtherHost(tmphost, tmpport, tmppeer);
break;
case 'v':
config.verbose = true;
break;
case 'w':
config.no_dummy_wr = true;
//config.priority = 2;
break;
case '?':
default:
usage();
// Error check command line.
if ((!config.got_listen_address) || config.home == NULL)
usage();
RepQuoteExample runner;
g_runner=&runner;
g_config=&config;
try {
runner.init(&config);
runner.doloop();
} catch (DbException dbe) {
cerr << "Caught an exception during initialization or"
<< " processing: " << dbe.what() << endl;
runner.terminate();
return 0;
// This is a very simple thread that performs checkpoints at a fixed
// time interval. For a master site, the time interval is one minute
// plus the duration of the checkpoint_delay timeout (30 seconds by
// default.) For a client site, the time interval is one minute.
void checkpoint_thread(void args)
DbEnv *env;
APP_DATA *app;
int i, ret;
env = (DbEnv *)args;
app = (APP_DATA *)env->get_app_private();
for (;;) {
// Wait for one minute, polling once per second to see if
// application has finished. When application has finished,
// terminate this thread.
for (i = 0; i < 60; i++) {
sleep(1);
if (app->app_finished == 1)
return ((void *)EXIT_SUCCESS);
// Perform a checkpoint.
// original line
if ((ret = env->txn_checkpoint(0, 0, 0)) != 0) {
//if ((ret = env->txn_checkpoint(0, 0, DB_FORCE)) != 0) {
env->err(ret, "Could not perform checkpoint.\n");
return ((void *)EXIT_FAILURE);
// This is a simple log archive thread. Once per minute, it removes all but
// the most recent 3 logs that are safe to remove according to a call to
// DBENV->log_archive().
// Log cleanup is needed to conserve disk space, but aggressive log cleanup
// can cause more frequent client initializations if a client lags too far
// behind the current master. This can happen in the event of a slow client,
// a network partition, or a new master that has not kept as many logs as the
// previous master.
// The approach in this routine balances the need to mitigate against a
// lagging client by keeping a few more of the most recent unneeded logs
// with the need to conserve disk space by regularly cleaning up log files.
// Use of automatic log removal (DBENV->log_set_config() DB_LOG_AUTO_REMOVE
// flag) is not recommended for replication due to the risk of frequent
// client initializations.
void log_archive_thread(void args)
DbEnv *env;
APP_DATA *app;
char **begin, **list;
int i, listlen, logs_to_keep, minlog, ret;
env = (DbEnv *)args;
app = (APP_DATA *)env->get_app_private();
logs_to_keep = 3;
for (;;) {
// Wait for one minute, polling once per second to see if
// application has finished. When application has finished,
// terminate this thread.
for (i = 0; i < 60; i++) {
sleep(1);
if (app->app_finished == 1)
return ((void *)EXIT_SUCCESS);
// Get the list of unneeded log files.
if ((ret = env->log_archive(&list, DB_ARCH_ABS)) != 0) {
env->err(ret, "Could not get log archive list.");
return ((void *)EXIT_FAILURE);
if (list != NULL) {
listlen = 0;
// Get the number of logs in the list.
for (begin = list; *begin != NULL; begin++, listlen++);
// Remove all but the logs_to_keep most recent
// unneeded log files.
minlog = listlen - logs_to_keep;
for (begin = list, i= 0; i < minlog; list++, i++) {
if ((ret = unlink(*list)) != 0) {
env->err(ret,
"logclean: remove %s", *list);
env->errx(
"logclean: Error remove %s", *list);
free(begin);
return ((void *)EXIT_FAILURE);
free(begin);
#define DATABASE_DUMMY "dummy.db"
void create_dummy_db(DB_ENV env, DB *dbp)
DB_ENV *dbenv=env;
int ret;
u_int32_t db_flags;
if ((ret = db_create(dbp, dbenv, 0)) != 0)
dbenv->err(dbenv, ret, "create_dummy_db: db_create");
db_flags = DB_AUTO_COMMIT | DB_CREATE;
//if ((ret = (*dbp)->open(*dbp,NULL, DATABASE, NULL, DB_BTREE, db_flags, 0)) != 0)
if ((ret = (*dbp)->open(*dbp,NULL, NULL, DATABASE_DUMMY, DB_BTREE, db_flags, 0)) != 0)
dbenv->err(dbenv, ret, "create_dummy_db: DB->open");
void reopen_dummy_db(DB_ENV env, DB *dbp)
DB_ENV *dbenv=env;
int ret;
u_int32_t db_flags;
if ((ret = db_create(dbp, dbenv, 0)) != 0)
dbenv->err(dbenv, ret, "create_dummy_db: db_create");
db_flags = DB_AUTO_COMMIT | DB_CREATE;
//if ((ret = (*dbp)->open(*dbp,NULL, DATABASE, NULL, DB_BTREE, db_flags, 0)) != 0)
if ((ret = (*dbp)->open(*dbp,NULL, NULL, DATABASE_DUMMY, DB_BTREE, db_flags, 0)) != 0)
dbenv->err(dbenv, ret, "reopen_dummy_db: DB->open");
void perform_db_operation(DB_ENV env, DB *dbp, bool bRead)
//main loop
//DB *dbp=NULL;
DB_ENV *dbenv=env;
int ret;
u_int32_t db_flags;
DBT key, data;
char buf[20]="dummy", *rbuf;
rbuf=buf;
if (*dbp == NULL)
create_dummy_db(dbenv, dbp);
if (! bRead)
memset(&key, 0, sizeof(key));
memset(&data, 0, sizeof(data));
key.data = buf;
key.size = (u_int32_t)strlen(buf);
data.data = rbuf;
data.size = (u_int32_t)strlen(rbuf);
if ((ret = (*dbp)->put(*dbp, NULL, &key, &data, 0)) != 0)
if (ret == DB_REP_HANDLE_DEAD)
//create_dummy_db(dbenv, dbp);
reopen_dummy_db(dbenv, dbp);
(*dbp)->err(*dbp, ret, "DB->put :");
else
if (ret != DB_KEYEXIST)
(*dbp)->err(*dbp, ret, "perform_db_operation: DB->put");
else
DB_BTREE_STAT *statp;
(*dbp)->stat(*dbp,NULL, &statp, 0);
std::cout<<"dbp read stats: key#"<< statp->bt_nkeys <<std::endl;
void dummy_write_thread(void args)
DbEnv *env;
APP_DATA *app;
char **begin, **list;
int i, listlen, logs_to_keep, minlog, ret;
DB *m_dbp; // a pointer
env = (DbEnv *)args;
app = (APP_DATA *)env->get_app_private();
logs_to_keep = 3;
for (;;) {
if (! app->no_dummy_wr)
if (app->is_master)
perform_db_operation(env->get_DB_ENV(),&m_dbp,false);
//env->txn_checkpoint(0, 0, DB_FORCE);
usleep(1 * 1000 * 1000);
else
if (app->is_master)
//DB *db_quote=g_repquote->get_DB();
//perform_db_operation(env->get_DB_ENV(),&db_quote,true);
//if (g_repquote)
// g_runner->print_stocks_size(g_repquote);
//env->txn_checkpoint(0, 0, DB_FORCE);
//perform_db_operation(env->get_DB_ENV(),&m_dbp,false);
env->rep_flush();
usleep(4 * 1000 * 1000);
my script to simulate the split brain
#!/bin/sh
[ -z "$node1" ] && node1=10.10.32.121
[ -z "$node2" ] && node2=10.10.32.91
trap myend 0 1 2 3 6 9 14 15
myend()
echo "Receive signal to stop test..."
un_split_brain
echo "done"
exit 1
split_brain()
echo -n "Split-Brain at node $node..."
snmpset -m ALL -v 2c -c svil 10.10.0.100 ifAdminStatus.41 i 2 >/dev/null 2>&1
echo "done"
un_split_brain()
echo -n "Undo Split-Brain at node $node..."
snmpset -m ALL -v 2c -c svil 10.10.0.100 ifAdminStatus.41 i 1 >/dev/null 2>&1
echo "done"
is_slave()
local r=$(ssh root@$1 "tail -2 /tmp/BDB.log" | grep -c CLIENT)
[ $r -gt 1 ] && ret=1 || ret=0
return $ret
is_master()
local r=$(ssh root@$1 "tail -2 /tmp/BDB.log" | grep -c MASTER)
[ $r -gt 1 ] && ret=1 || ret=0
return $ret
wait_for_master()
echo -n "Waiting for MASTER at node $node ... "
is_master $node
r=$?
while ( [ ! $r -eq 1 ] )
do
usleep 500000
is_master $node
r=$?
echo -n "."
done
echo "done"
wait_for_slave()
local r
local tm
tm=0
echo -n "Waiting for SLAVE at node $node ... "
is_slave $node
r=$?
while ( [ ! $r -eq 1 ] )
do
usleep 500000
is_slave $node
r=$?
echo -n "."
tm=$((tm+1))
[ $tm -gt 120 ] && break
done
[ $tm -gt 120 ] && ret=0 || ret=1
echo "done"
return $ret
run_test_split_brain()
local nt
nt=1
nfails=0
x=4
[ -z "$1" ] && node=$node2
while ((1))
do
printf "*************** TEST [%02d] ********************\n" $nt
split_brain
wait_for_master
x=$((RANDOM%9))
echo -n " waiting $x sec ..."
sleep $x
echo "done"
un_split_brain
wait_for_slave
r=$?
[ ! $r -eq 1 ] && echo "`date` - test [$nt] - fails ..." || echo "`date` - test [$nt] - OK ."
[ ! $r -eq 1 ] && nfails=$((nfails+1))
perc_failure=$(echo "100.0 - $nfails / $nt * 100.0" | bc -l)
echo "************************************************ [% Success test $perc_failure % ]"
nt=$((nt+1))
x=$((RANDOM%9))
echo -n " waiting $x sec ..."
sleep $x
done
run_test_split_brain
here is the makefile to run to two environments
i run:
- make run
and in another window sh test_split_brain.sh
node1?=10.10.32.121
node2?=10.10.32.91
nsite?=2
debug?=0
all: RepQuoteExampleEric install
RepConfigInfo.o: RepConfigInfo.cpp RepConfigInfo.h
g++ -I/usr/local/BerkeleyDB.5.1/include/ -g -O0 -c RepConfigInfo.cpp -o RepConfigInfo.o
RepQuoteExampleEric: RepQuoteExampleEric.cpp RepConfigInfo.o
g++ -I/usr/local/BerkeleyDB.5.1/include/ -g -O0 RepQuoteExampleEric.cpp RepConfigInfo.o -o RepQuoteExampleEric -L /usr/local/BerkeleyDB.5.1/lib/ -lreadline -lcurses -ldb_cxx
kill:
-ssh -X root@$(node1) "killall -9 /root/RepQuoteExampleEric"
-ssh -X root@$(node2) "killall -9 /root/RepQuoteExampleEric"
run: RepQuoteExampleEric kill install clean_env
ssh -X root@$(node1) "xterm -geom 100x20+100+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/RepQuoteExampleEric -h /opt/bdb/ -l 2.0.0.110:12345 -r 2.0.0.210:12345 -a quorum -b -n $(nsite) -v | tee /tmp/BDB.log\"" &
ssh -X root@$(node2) "xterm -geom 100x20+800+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/RepQuoteExampleEric -h /opt/bdb/ -l 2.0.0.210:12345 -r 2.0.0.110:12345 -a quorum -b -n $(nsite) -v -w | tee /tmp/BDB.log\"" &
run_node2: clean_env2
ssh -X root@$(node2) "xterm -geom 100x20+800+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/RepQuoteExampleEric -h /opt/bdb/ -l 2.0.0.210:12345 -r 2.0.0.110:12345 -a quorum -b -n $(nsite) -v -w | tee /tmp/BDB.log\"" &
debug_node2: clean_env2
ssh -X root@$(node2) "xterm -geom 100x20+800+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/RepQuoteExampleEric -h /opt/bdb/ -l 2.0.0.210:12345 -r 2.0.0.110:12345 -a quorum -b -n $(nsite) -v -w | tee /tmp/BDB.log\"" &
sleep 3
ssh -X root@$(node2) /sbin/pidof RepQuoteExampleEric >/tmp/pid
ssh -X root@$(node2) ~/kdbg /root/db-5.1.19/examples/cxx/excxx_repquote/RepQuoteExampleEric -p `cat /tmp/pid`
run_debug_node1: RepQuoteExampleEric kill install clean_env
ssh -X root@$(node1) "xterm -geom 100x20+100+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/kdbg /root/RepQuoteExampleEric\" " &
ssh -X root@$(node2) "xterm -geom 100x20+800+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/RepQuoteExampleEric -h /opt/bdb/ -l 2.0.0.210:12345 -r 2.0.0.110:12345 -a quorum -b -n $(nsite) -v\"" &
run_debug_node2: RepQuoteExampleEric kill install clean_env
ssh -X root@$(node1) "xterm -geom 100x20+100+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/RepQuoteExampleEric -h /opt/bdb/ -l 2.0.0.110:12345 -r 2.0.0.210:12345 -a quorum -b -n $(nsite) -v\" " &
ssh -X root@$(node2) "xterm -geom 100x20+800+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/kdbg /root/RepQuoteExampleEric\"" &
install: RepQuoteExampleEric
scp RepQuoteExampleEric root@$(node1):~
scp RepQuoteExampleEric root@$(node2):~
clean_env: clean_env1 clean_env2
clean_env1:
ssh -X root@$(node1) rm -rf /opt/bdb/*
clean_env2:
ssh -X root@$(node2) rm -rf /opt/bdb/* -
Services in a two node installation
Hi,
we have 2 node installation of R12.1.1
Node A: Database & Batch Processing
Node B: Application Services(Root service, web entry point services, web application services & other services)
One thing i need to clarify
Should i have to select root services in primary application node(node A)
if selecting root services at primary application node then i have to select web entry point services and web applicatio services compulsory at node A
Please explain
Thanks,
Jak
Edited by: user12257829 on Nov 22, 2009 9:53 PMHi,
According to your configuration, root services should be enabled on (Node B). In addition to "Oracle Applications Installation" manual, please see (Note: 406558.1 - Configuring Applications Node Services in Oracle E-Business Suite Release 12) for details.
Regards,
Hussein -
Oracle Application 11i using multi node installation
Hi every one,
Can anyone help me to install in multi node.
/d01 is in dbtier(1st unit) and /u01 is in appstier(2nd unit).
how to install that kind of split configuration.?
do i need to stage in appstier? and run rapidwiz?
how to copy configuration file from dbtier to appstier?
do i need to enable load balancing?
i expecting your soonest reply guys..
Thanks BJCDRCheck "Oracle Applications Installation Guide: Using Rapid Install" Manual, all the steps to perform a multi-node installation and configure load balancing are mentioned there.
-
Issue with two SID installation in a Single Windows 2003 Server.
Hi,
When I install second installation in a same single machine where already One SID installed, first one is goes down.
But Database is working fine.....
Disp+Work.exe status first it goes to Yellow then goes down..
Kernal of First installation is already updated.
Disp+Work.exe ---> Develeoper_Trc detail is following..
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid TRN
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 159
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 6360
Thu Oct 30 16:22:26 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 6360) [dpxxdisp.c 1254]
shared lib "dw_xml.dll" version 159 successfully loaded
shared lib "dw_xtc.dll" version 159 successfully loaded
shared lib "dw_stl.dll" version 159 successfully loaded
shared lib "dw_gui.dll" version 159 successfully loaded
shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Thu Oct 30 16:22:31 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ides_TRN_01 <
DpShMCreate: sizeof(wp_adm) 21008 (1616)
DpShMCreate: sizeof(tm_adm) 5912624 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EF60050, size: 6604928)
DpShMCreate: allocated sys_adm at 000000000EF60050
DpShMCreate: allocated wp_adm at 000000000EF62150
DpShMCreate: allocated tm_adm_list at 000000000EF67360
DpShMCreate: allocated tm_adm at 000000000EF673C0
DpShMCreate: allocated wp_ca_adm at 000000000F50ABF0
DpShMCreate: allocated appc_ca_adm at 000000000F5109B0
DpShMCreate: allocated comm_adm at 000000000F5128F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F599580
DpShMCreate: allocated gw_adm at 000000000F599600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F599630
DpShMCreate: allocated wall_adm at 000000000F599640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 6764
argv[0] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
argv[1] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=TRN
argv[7] = -DSAPMYNAME=ides_TRN_01
argv[8] = -DSAPPROFILE=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( ides) [dpxxdisp.c 11937]
DpStartStopMsg: send start message (myname is >ides_TRN_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu Oct 30 16:22:36 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 292
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4516) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6764)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Oct 30 16:23:11 2008
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:21 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Oct 30 10:53:21 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 6800 Ended no 1 0 0
1 DIA 6796 Ended no 1 0 0
2 DIA 6760 Ended no 1 0 0
3 DIA 6772 Ended no 1 0 0
4 DIA 6896 Ended no 1 0 0
5 DIA 6848 Ended no 1 0 0
6 UPD 6860 Ended no 1 0 0
7 ENQ 6784 Ended no 1 0 0
8 BTC 6864 Ended no 1 0 0
9 BTC 6892 Ended no 1 0 0
10 BTC 6924 Ended no 1 0 0
11 SPO 6928 Ended no 1 0 0
12 UP2 6908 Ended no 1 0 0
Dispatcher Queue Statistics Thu Oct 30 10:53:21 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Thu Oct 30 10:53:21 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T13, U14, , gokul_ggn, 16:22:40, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Thu Oct 30 10:53:21 2008
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:26 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ides_TRN_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (6752) (SOFT_KILL)
Stop icman
killing process (6700) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 13
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T13
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T13 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
SiSelNSet: set events of sock 292 to: ---
NiBufISelRemove: remove hdl 5 from set0
SiSelNRemove: removed sock 292 (pos=2)
SiSelNRemove: removed sock 292
NiSelIRemove: removed hdl 5
DpDelSocketInfo: del info for socket 5 (type=3)
NiICloseHandle: shutdown and close hdl 5 / sock 292
NiBufIClose: clear extension for hdl 5
dp_tm_adm[13].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1225364011/669000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 13
DpListInsert: insert elem 13 into tmadm_free_list (at begin)
DpListInsert: 188 elems in tmadm_free_list
DpListRemove: remove elem 13 from tmadm_inuse_list
DpListRemove: 13 elems in tmadm_inuse_list
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:6752 HANDLE:404)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:27 2008
NiISelect: TIMEOUT occured (1000ms)
Thu Oct 30 16:23:28 2008
[DpProcDied] Process died (PID:6752 HANDLE:404)
wait for end of icman
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:29 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:31 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:33 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:34 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:35 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:6700 HANDLE:412)
[DpProcDied] Process died (PID:6764 HANDLE:388)
DpStartStopMsg: send stop message (myname is >ides_TRN_01 <)
NiIMyHostName: hostname = 'ides'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Oct 30 16:23:39 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12283]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 332 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 332 (pos=3)
SiSelNRemove: removed sock 332
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 332
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 6360) [dpxxdisp.c 10484]
Good Bye .....
Please help out.
Thanks in Advance.
Regards,
Gokul CahndolaYes Finally I Got the solution.
please check
>r3trans -d To Check Conectivity between Apps and DB Server.
If 000 then its OK- mean connectivity is OK, in this case all work.
when I was installing Second system then tnsname.ora and listner file was creating and privios system entry was removed. DUE to that reasion First one goes down.
Solution:- Both system entry should be Listner and tnsname file. Then Both server will work.
**********THANKS TO "AC"**************
Regards,
Gokul Chandola -
ORA-04030 On ORACLE 10g RAC database with two nodes as active
OS-HP-AIX 5L(5.3)----IBM
DATABASE-10.2.0.2(10G)
I am getting error "ORA-04030" while executing a query
I have already set the ulimits for oracle account to UNLIMITED
1)STACK----UNLIMITED(BOTH SOFT/HARD LIMITs)
2)DATA----UNLIMITED(BOTH SOFT/HARD LIMITs)
3)MEMORY----UNLIMITED(BOTH SOFT/HARD LIMITs)
4)TIME----UNLIMITED(BOTH SOFT/HARD LIMITs)
step 1:-When I skip the listener then query executes very fine.But when
i go through the listener the "ORA-04030" errors come.
step 2:-Then when i stop and start listener on both the nodes the all
the query works fine.
This thing happens every time the system reboots
Can anyone tell me the solution for this
and why this thing happensThanks for ur immediate response
ORA-04030: out of process memory when trying to allocate 127000 bytes (QERHJ
hash-joi,kllcqas:kllsltba)
ORA-04030: out of process memory when trying to allocate 66184 bytes (pga
heap,kco buffer)
ORA-04030: out of process memory when trying to allocate 127000 bytes (QERHJ
hash-joi,kllcqas:kllsltba)
sql qurry
SELECT
WRK_PERF_ID, WRK_ID, PTY_NA_ID, PTY_ID PTY_ID,
PTY_TYP_CDE, PTY_ROL_TYP_CDE, SOC_CDE2 SOC_CDE,
DECODE(SOC_CDE2,'10','Y',NULL,'N',
NVL(( SELECT NVL(AFL_IND, 'N') FROM pty y WHERE y. IPI_BAS_NR = SOC_CDE2 AND NVL(DEL_FL,'N') = 'N'
AND ROWNUM < 2 ),'N')) AFL_IND,
pDate,
ENTMT_ID, ROL_TYP_CDE, IP_STA_IND_CDE, UNID_ID_FST_NA,
UNID_IP_NA, IP_PAY_STA, REASON, SHR_OWN_PTY_NA_ID,
PGM_STT_DT, PAY DIRIND,
ACTV_OWN_SHR, ACTV_COPY_SHR, CLM_OWN_SHR, CLM_COPY_SHR,
FNC_PTY_RESIGNED_ON_DIS_DT ( PTY_ID,
TO_DATE( DECODE(PTY_TYP_CDE,'WRTMB',
'2004-04-10' ,'AFMBR', '2004-05-10' , '2004-03-10'),'YYYY-MM-DD')) TF
FROM
SELECT WRK_PERF_ID, WRK_ID, PTY_NA_ID, PTY_ID PTY_ID,
PTY_TYP_CDE, PTY_ROL_TYP_CDE, NVL(SOC_CDE2,'0') SOC_CDE2,
DECODE(PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-05-10' , '2004-03-10') pDATE,
ENTMT_ID, ROL_TYP_CDE, IP_STA_IND_CDE, UNID_ID_FST_NA,
UNID_IP_NA, IP_PAY_STA, REASON, SHR_OWN_PTY_NA_ID,
PGM_STT_DT, PAY_DIR_IND,
SUM(NVL(ACTV_OWN_SHR,0)) ACTV_OWN_SHR,
SUM(NVL(ACTV_COPY_SHR,0)) ACTV_COPY_SHR,
NVL( SUM(NVL(CLM_OWN_SHR,0)),0) CLM_OWN_SHR,
NVL(SUM(NVL(CLM_COPY_SHR,0)),0) CLM_COPY_SHR
FROM
SELECT B.WRK_PERF_ID, B.WRK_ID, B.PTY_NA_ID,
D.PTY_ID , D.PTY_TYP_CDE, D.PTY_ROL_TYP_CDE,
CASE
WHEN D.PTY_ROL_TYP_CDE ='W' OR D.PTY_ROL_TYP_CDE ='P'
THEN
SELECT MIN(soc_cde)
FROM MBRSH_AGR_TER A
WHERE A.pty_id = D.PTY_ID
AND A.STT_DT <= TO_DATE( DECODE(D.PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-
05-10' , '2004-03-10' ),'YYYY-MM-DD')
AND ( A.END_DT >= TO_DATE( DECODE(D.PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-05-10' , '2004-03-1
0' ),'YYYY-MM-DD') OR A.END_DT IS NULL)
AND A.INCL_EXCL_IND = 'I'
AND ( A.TIS_CDE = 840 OR
EXISTS (
SELECT 1
FROM CPST_TERR C
WHERE C.CHILD_TIS_CDE = 840
AND C.PARENT_TIS_CDE = A.TIS_CDE
AND NVL(C.DEL_FL, 'N') = 'N'
AND NVL(A.DEL_FL,'N') = 'N'
AND soc_cde NOT IN
SELECT soc_cde
FROM MBRSH_AGR_TER B
WHERE B.pty_id = D.PTY_ID
-- b.soc_cde = a.soc_cde
AND B.STT_DT <= TO_DATE( DECODE(D.PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-0
5-10' , '2004-03-10' ),'YYYY-MM-DD')
AND (B.END_DT >= TO_DATE( DECODE(D.PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-05-10' , '2004-03-10'
),'YYYY-MM-DD') OR B.END_DT IS NULL)
AND B.INCL_EXCL_IND = 'E'
AND NVL(B.DEL_FL,'N') = 'N'
AND ( B.TIS_CDE = 840 OR
EXISTS ( SELECT 1
FROM CPST_TERR D2
WHERE D2.CHILD_TIS_CDE = 840
AND D2.PARENT_TIS_CDE = B.TIS_CDE
AND NVL(D2.DEL_FL, 'N') = 'N'
)-- NOT IN
) --w,p end
WHEN D.PTY_TYP_CDE='SOC' THEN D.IPI_BAS_NR
END
) SOC_CDE2,
B.ENTMT_ID, B.ROL_TYP_CDE,
B.IP_STA_IND_CDE, B.UNID_ID_FST_NA, B.UNID_IP_NA, B.IP_PAY_STA, B.REASON, B.SHR_OWN_PTY_NA_ID,
A.PGM_STT_DT, D.PAY_DIR_IND,
ACTV_OWN_SHR, ACTV_COPY_SHR, CLM_OWN_SHR, CLM_COPY_SHR
FROM STG_ACIP_DIST_MODE1 B, STAGING_USAGE_SELECTION_MODE1 A, PTY_NA C, PTY D
WHERE B.WRK_PERF_ID = A.WRK_PERF_ID
AND B.PTY_NA_ID = C.PTY_NA_ID
AND C.PTY_ID = D.PTY_ID
AND A.CALC_RUN_CTL_ID = 279
AND A.DIS_ID = 241
GROUP BY WRK_PERF_ID, WRK_ID, PTY_NA_ID, PTY_ID, PTY_TYP_CDE, PTY_ROL_TYP_CDE,
SOC_CDE2, ENTMT_ID, ROL_TYP_CDE, IP_STA_IND_CDE, UNID_ID_FST_NA,
UNID_IP_NA, IP_PAY_STA, REASON, SHR_OWN_PTY_NA_ID,
PGM_STT_DT, PAY_DIR_IND
order by WRK_PERF_ID, WRK_ID, PTY_NA_ID, PTY_ID
It is just a simple query with group by which i ran by sqlplus but it is geting more then million records. -
Dual boot with two arch installations and gummiboot
Hi,
I found similar topics regarding this matter, but they couldn't resolve my doubts, so I ask once again.
I currently have an EFI partition with gummiboot and will like to add a new arch installation (to have different configurations, packages versions and repositories. I came to the conclusion that this is the cleanest way to achieve what I want). I think I could use the same partition but if I mount it on /boot there will be problems when I upgrade the kernel because it will override the image in the partition when running mkinitcpio. Maybe if I maintain both installations in sync everything would be fine, but on the long run I think this could cause problems.
I considered to edit /etc/mkinitcpio.d/linux.preset in one of the installations to change the name of the image, thus both images could cohabit in the same partition, but I don't know if there are some cleaner way to achieve what I want.
Thanks.TheSaint wrote:It'll be necessary to configure mkinitcpio to address the correct path in order that the future kernel updates will go to ther right place.
See this for details.
I don't think so -- the use of a bind mount means that the kernel image can go in the standard location, that's the whole point of it.
@OP: Yes, just make sure to call the path to the respective kernel images relative to $ESP -
Hi,
Node 1:
DB + CM + Reports
Node 2:
Forms + Web
While doing Installation in Node1, I have selected the following services in APplications to enable for CM and Reports
1. Batch Processing
For Node2, I have given the following for Forms and Web
1. Root Processes
2. Web Entry Point Services
3. Web Application Services
4. Other
Please let me know, if I was wrong?Hi,
As per the installation document (Page 2-22) ..
When installing, be aware of the following important service dependencies:
When you select Root Services, the Web services are automatically selected as well. This is because Web Entry Point Services, Web Application Services, and Root Services must all be installed on the same node.
Thanks,
Hussein -
Bootcamp partition won't boot with two OSX installations
Hey,
I have a MacBook Pro running OSX Mavericks (10.9.5) and had installed Windows 8.1 through Bootcamp and everything worked like a charm. I then added a new partition to install the developer preview of OSX Yosemite. Everything worked, I could boot to OSX 10.9.5, OSX 10.10, both recovery partitions and Windows.
Lately, my Mac had some issues that made me booting to 10.9.5 recovery and using disk utility to repair the Mavericks and Yosemite partitions (both were good, interestingly I could not repair the disk permissions, though) and I even clicked on "Repair", as the whole disk was selected and Disk Utility repaired something (I forgot what it was, but I think it changed the MBR).
Now the Windows partition is gone, when I option-Boot and when I try to reboot from OSX to the Windows partition using the "startup disk" option of System Settings, it says
No bootable device --- insert boot disk and press any key
I want to be able to boot Windows again (and my OSX partitions) and would love to be able to do so, even when I choose to delete the Yosemite partition once it's out of beta so that I can update Mavericks. I tried using this guide:
Repairing Boot Camp after creating new partition
My problem is that it says that the Windows partition should be number 5 on /dev/disk0. In my case, the described partition is number 6.
Can I simply replace the number and it should still work or will it break something that the Windows partition is not at the place it normally is?
Thanks in advanceWell, I just tried it and it didn't work. I still don't see the Bootcamp partition when I option-boot and when I try starting Windows via Startup Disk settings, the screen just turns black after a while and then a white blinking horizontal cursor appears (not even the "No bootable device" error any longer).
Any help would be appreciated. -
Resolve node with two nodes (nested tables)
Hello,
I want to hide a field depending of the value of another field of the same line. the issue is that the line is from a nested table.
here is the code :
var nodList = xfa.resolveNodes("xfa.record.LISTE_POSTES_TRAVAIL.DATA[].LISTE_CARAC.DATA[].CARAC");
I want to get the value of "carac" field in table LISTE_CARAC_DATA.
So when I display this :
xfa.host.messageBox(""+nodList.item(this.parent.index).value);
I always see the values of the table LISTE_CARAC_DATA for the first line of LISTE_POSTES_TRAVAIL.
Could you help me ?
Thank you.No Otto you won't make me rebuild my form
I think I just get what is wrong, the value of this.index is always 0, that explain why sometimes it works, and sometimes not.
Maybe I just need to put a counter in my table. I will do that if I don't find a javscript solution.
Anyway, thanks a lot Otto for your time and very helpful advice.
This is the code if it can help someone :
var nodTry = xfa.resolveNodes("$.parent.parent.parent.POSTE[*].multiple_resultat.RESULTAT_T1");
//The nodtry is complex because of all the subforms.
var selection = $.boundItem(xfa.event.newText);
if ( this.CARAC.rawValue == "LISTERIA" )
if ( selection == "YES" )
//COMPTEUR is the index that I created (I add a columns in my table and filled it in the ABAP program).
// I don't need to do "+1" because index started at 0 in adobe form.
nodTry.item(this.COMPTEUR.rawValue).mandatory = "error";
nodTry.item(this.COMPTEUR.rawValue).access = "open";
nodTry.item(this.COMPTEUR.rawValue).fillColor = "255,255,255";
else if ( selection != "YES" )
nodTry.item(this.COMPTEUR.rawValue).mandatory = "disabled";
nodTry.item(this.COMPTEUR.rawValue).access = "readOnly";
nodTry.item(this.COMPTEUR.rawValue).fillColor = "230,230,230";
nodTry.item(this.COMPTEUR.rawValue).rawValue = "";
Edited by: Louis-Arnaud Bouquin on Feb 9, 2010 11:39 AM -
Load Balance Problem in Oracle RAC 10.2.0.4 (two nodes with CRS)
Hi all,
I have an Oracle RAC 10.2.0.4 with two nodes and I'm having problems with sessions load balance.
The problem is that all connections are going to the node which is enabled as 'master' in RAC, the node who has located .db resource in CRS.
If .db resource is located in node1 all connections are made in node1. In the same way, all connections are made in node2 when .db resource from CRS stack is located in node2.
The connections are made by a pool in Tomcat 6 using RAC service for made the connections.
Any idea?
Thanks in advance.
Here is an example of my net configuration:
listener.ora in node1:
LISTENER_RAC_NODE1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node1_vip)(PORT = 1525)(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP)(HOST = node1)(PORT = 1525)(IP = FIRST))
tnsnames in node1:
LISTENERS_RAC =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = node1_vip)(PORT = 1525))
(ADDRESS = (PROTOCOL = TCP)(HOST = node2_vip)(PORT = 1525))
NODE1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node1_vip)(PORT = 1525))
(ADDRESS = (PROTOCOL = TCP)(HOST = node1)(PORT = 1525))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rac)
(INSTANCE_NAME = rac1)
RAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node1_vip)(PORT = 1525))
(ADDRESS = (PROTOCOL = TCP)(HOST = node2_vip)(PORT = 1525))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rac)
********************************************************It is my fault.
It was the connection service. I had one one with preferred option and one without it. Now is working well. -
Control file not updated till date in RAC two node database
Hi,
Good day.
To my surprise i found that control files, in our database RAC with two nodes, are not updated till date except one from node 1 and another from node 2.
But we got all the controlfile names in the init parameter file, in both the nodes.
Node 1
bash-3.00$ ls -lrt
total 922128
-rw------- 1 oracle dba 157286400 Nov 3 2007 cntrl03.dbf
-rw------- 1 oracle dba 157286400 Nov 3 2007 cntrl02.dbf
-rw------- 1 oracle dba 157286400 Apr 12 17:21 cntrl01.dbf
Node 2
bash-3.00$ ls -lrt
total 922128
-rw------- 1 oracle dba 157286400 Mar 30 09:17 cntrl03.dbf
-rw------- 1 oracle dba 157286400 Mar 30 09:17 cntrl02.dbf
-rw------- 1 oracle dba 157286400 Apr 12 17:20 cntrl01.dbf
As you could see cntrl01.dbf is the only file updated till date in both the nodes. The database is running fine.
what is actually happening?
Any suggestions?
Thanks,
Balu.As you're using RAC it is very likely that you are using an SPFILE.
Connect as a DBA account (or an account with SELECT ANY DICTIONARY privileges) in both the instances and do "show parameter spfile" and "show parameter control" (or query V$parameter)
It is likely that the spfile is referencing only 1 controlfile.
Maybe you are looking for
-
What is the meaning of the cloud icon ?
I have been trying to restore iTUnes from TM, failed completely I dragged the Music folder from TM to Music folder in my HD Then I created a new library according to instructions (close iTunes, open with Alt etc) The result was this strange cloud and
-
How can I _really_ disable ACPI?
One morning I found my MacBook frozen and with fans spinning noisy. It refused to boot anymore, even off the install DVD. I started in target disk mode and checked the disk, which was fine. The Apple Hardware Test also ran without complaints, althoug
-
VPN no longer working after iOS 8.0.2 upgrade
Hello, after the upgrade to iOS 8.0.2 we have some problems with VPN. The connection runs always stable and we don't change anything on our infrastructure. But since the upgrade the IPads/Phones always show the notification "could not connect the ser
-
Quick Multiple Library Question.
Hi all, My wife's iPhoto library is hitting 60gigs. Time to split it up. My goal is to keep only this last year (2011) on her laptop and have years 2001-2010 in a separate library on and external HD. Now this library is ten plus years of cropping, ad
-
I received 100 pcs of excisable material. 20 were rejected and have to be sent back to the vendor. I did Return delivery (mvt 122) and created & posted excsie invoice using J1IS. Return Entry in the RG23A I has been posted but no return entry in RG2