Cannot see SWFVISU tasks in Portal UWL after re-registering

Hi,
I am using EP7.01 SP3, ESS 1.0 SP 15, ECC6.
I do not see the tasks listed in SWFVISU in UWL even after registering the system alias in UWL Administrator. I have registered the alias on webflow connector, cleared cache. Logged off,
logged on and I still dont see the tasks.
I additionaly went to R3 transaction SWU_OBUF and synchronized the runtime buffer.
Then registered on UWL Admin, cleared cache.
Any ideas on this?
RD

Hi Pramod,
Thanks you for response.
I have restarted the portal, but it still does not show the tasks especially the ones for leave.
The portal landscape is a Global Portal as the consumer and the HR Portal(ESS MSS and other packages are installed) as the provider.
Im trying this directly on the HR Portal.
Do you think the Global portal has an effect on this?
I need to find a solution for this, but as a workaround is it possible to add the leave itemtypes(there are 3 item types for leave) to the current UWL. For example:
<ItemType name="uwl.task.webflow.TS12300097.SAP_R3_HumanResources" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_R3_HumanResources" externalType="TS12300097" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="LeaveRequestApprover"/>
            <Property name="WebDynproDeployableObject" value="com.sap/ess~lea"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
RD

Similar Messages

Resources Cannot See Timsheet Tasks in PWA 2010

We have 4 resources who cannot see any tasks listed on their timesheets in PWA 2010. For one resource this started a week ago, prior to that they could see the tasks. For another resource the problem started today, earlier this week this person
could see his tasks. For another resource it happened 3-4 weeks ago. Nothing that we are aware of has changed with the projects, their Resource Records or on their computers.
In addition to not being able to see anything on their timesheets in PWA, they cannot see any projects listed in Project Center.
We are at a lose for what might be causing this. Any ideas/suggestions?

Hi Dennykat,
Are those resources part of the "team member" security group? Ensure that their permissions have not been modified in any ways. They also might have been removed from the project team.
When you go to the resource center, select the resources and view assignments, can you actually view their assignments?
Then you could check:
Are the resource their assignments owner (insert the "assignment owner" column in Project Pro)?
Is the project correctly published with no error messages in the queue?
Is the "publish" value to "YES" for all resources assignments?
Are any filters applied in the PWA timesheet view of the users?
When they click on "add row" then "from existing assignments", can they see their assignments?
Try to open a delegation session for those users and check what you actually can see.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Cannot see transported items in Queue, even after releasing them.

I cannot see transported items in Queue, even after releasing them. When Iam in transaction: SE09, I am able to see all the released objects, and the check marks next to each one which looks good...Where are these files? Under usr/sap/trans, they show up under logs with nothing in them except log data...Not in Cofiles & datafiles either.
Any input would be greatly appreciated.
Alan

Hello Jazz!
Our developer released them, and I will get more details from him. We can see them when in SE09/10. Just cannot see them in the import queue? Also can't find the files under: usr/sap/trans, except the logs???
We just want to find these files, and either zip them up, or put them on a CD for later use, and this project will wind down soon.
Any other suggestions on how we can find these files, as all exports normally show up in usr/sap/trans/data, and cofiles...but not in this case???.
Thanks Again,
Alan

TS1369 Why i cannot see Ipod icon into my laptop after i connected to my laptop with usb cable

Why i cannot see ipod icon into my laptop after iconnected to my laptop

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears.
Otherwise:
iOS: Device not recognized in iTunes for Windows

Cannot see my text or the cursor after installing pages...

Cannot see my text or the cursor after installing pages...

At a guess you have simply chosen a blank Layout mode template.
Blank Layout templates have absolutely nothing on them, you have to add your own textboxes.
Choose a Word Processing template, they are listed in the Template Chooser sidebar.
Peter

Satellite M70-340: I cannot see the DVD schort cut menu after reinstallation

Hi,
I just recently bought Toshiba M70-340 2 weeks ago. Now I learn that there is better Toshiba comparing the my one.
My question is I cannot see on the screen the DVD schort cut menu. First time when I opened it it was on the rıght handside
of screen and my machine was Turkish Win XP Home edition. Than I reformat and change into English version of WinXP that comes with in Toshiba recovery CD. But I lost the screen menu for DVD I guess. Now ı don't know how to re-install that option.
Plus my machine is use the Intel Centrino 1.7 but I am not sure if this is a dual proccess. Secondly the ram is 512MB and I am trying to buy 2GB extened ram but seems still very very expensive (around $1100) Why is that 2GB ram so expensive?
I am using my laptop for software engineering as well as using Macromedia flash and Adobe Photoshop.
The both application and MS VS.NET 2005 as well as SQL Server 2000 and SQL Server 2005 application are very slow and sometime it takes more than 30
min. to compile or open it.
I have my home PC P4 3.2G with 1GB ram and it's faster than my Toshibe laptop.
Please be patien with me, after a 5 years later I bought my second laptop and first one was notebook from another manufacture.
I search in the internet and I find the M70-340 with Turkish Q type keyboard was the best option and it cost me $1450.
All I need how to overcome my problem and I need someone from Toshiba to explained to me carefully.
Can someone read my post and answer my question and worries?
I thank you very much and I looking forward to receive some help.
Kind Regards,
NTMS2006

Hello
I dont want to disappoint you but please dont expect someone from Toshiba will write to you because this is user-to-user forum. I will try to write some comments because I have the same unit as you.
This DVD shortcut is really not understandable for me and I really dont know what you are writing about. If the DVD drive is recognized and installed properly it should be listed in device manager and also shown in Windows explorer. If you want to discus about it please describe exact status of DVD drive in device manager and Windows explorer.
You are right about memory. This notebook is delivered with 512 MB Ram. According the notebook specification it can handle max with 2GB of Ram and if you want to use max please use 2x1GB module. Compatible one is DDR2-400/533 1GB (PA3411U-1M1G).
2GB modules are the newest and everything new is very expensive. I dont know how much it can costs but definitely not around $1100. For this money you can buy the whole notebook.
The list of used software is impressive and I am not wondering if the notebook runs slow. Upgrade it to max Ram and it will be much faster. Please dont compare your desktop with this mobile unit.
Pick up info how much costs PA3411U-1M1G memory module and use two of them for max RAM. You will see that unit will run faster and I hope you will be satisfied with performance.
Have a nice day!

Cannot see essbase application in shared serivce after upgradation

hi i am trying to upgrade hyperion 11.1.2.1 to 11.1.2.3 with maintenance release . after the configuration with previous database and starting all the serives, when i loging to shared service i cannot see my application in essbase cluster 1 . i tried to register option in the essbase but it say registration is not allowed.

Is it just one application you cannot, can you see other ones from the previous release.
What happens if you create a new application
Check the essbase logs and the SharedServices_Security_Client log - Installation and Configuration Troubleshooting Guide
Cheers
John

CRM Tasks in Portal UWL

Hello Everyone,
Specific question for everyone. It is possible to use the UWL to pull in Tasks from CRM 7.0 into the portal. However, when the tasks are launched, I would the details NOT to be displayed in the SAPGUI HTML but in the CRM 7.0 BSP.
Anyone do this before?

Hi Pramod,
Thanks you for response.
I have restarted the portal, but it still does not show the tasks especially the ones for leave.
The portal landscape is a Global Portal as the consumer and the HR Portal(ESS MSS and other packages are installed) as the provider.
Im trying this directly on the HR Portal.
Do you think the Global portal has an effect on this?
I need to find a solution for this, but as a workaround is it possible to add the leave itemtypes(there are 3 item types for leave) to the current UWL. For example:
<ItemType name="uwl.task.webflow.TS12300097.SAP_R3_HumanResources" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_R3_HumanResources" externalType="TS12300097" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="LeaveRequestApprover"/>
            <Property name="WebDynproDeployableObject" value="com.sap/ess~lea"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
RD

Cannot see all my images in Library after LR 4 upgrade

Firstly let me explain that when it comes to LR and catalogues I am a positive newbie, I just use LR to tweak images, and I am not very organised. So excuse the iffy terminology below.
When I used LR3.6 The Library option listed all my files on the left hand side under 'Folder' and showed a sub-folder for each year 2009-2012. I have now upgraded to LR4, and all I can see is 2011. During the install process of LR$ it asked me if I wanted to upgrade the process model, which I said yes and it did. Then, because I had read that 4.1 fixed a lot of issues, I downloaded and installed RC4.1 which I am running now.
How do I make LR4 show me all my Folders? I don't think I should be re-importing them all.
Thanks in anticipation, and soryy for the vagueries above.

Oh, this is probably relevant....
In Library view, the files that are in the 2011 folder are all called DSC00nn-2.NEF ie now have -2 appended to the name.
If I try to add an existing Folder, ie 201, it takes me to Import, and wants to Import the whole lot. ie they are all checked.
Looks like my catalogue is broken, and my worry is all my old edits are lost too.

Removing Task from UWL after approval

HI Gurus
I Need to Delete a task in the UWL after approval
Scenario:
I have developed the mss/pcr adobe forms inthe place of standard adobe forms i have configured the customized adobe forms which i have developed in Webdynpro for Java
So in mss/pcr application we have two levels of approval
First
Intiator will enter the data and he will submit the form then it will goto the manager UWL
Second
Manager will click on the task(these task ids i have configured in SWFVISU) .And next one more form will be opened with the updated data and manager will approve it and he will click on the approve button then that form should not be in the UWL
But I dont know what are the settings i need to do for that .
Please help me in this .

jvhncvbnc

How can I see my tasks on the screen

I want to schedule a new event. I can do this, but I cannot see it on the screen under the calendar. Can anyone help.
Thanks
Russ Kent

Thanks for your reply, but I am talking about tasks not events. I can see my events, I cannot see any tasks below that. I used to be able to, but they have disappeared. I can plan a new task, but it never shows anywhere on my screen after i have planned it.
Cheers,
Russ Kent

Navigation back to UWL after completing the task.

Hi All,
I am new to the portal, I would like to know is there any way to navigate back to UWL after completing a task in UWL instead of seeing the action is completed screen?
Thank you in advance.
Regards,
Ravi

Hello Ravi,
Open the UWL iView, there will be a parameter named 'Path to the UWL iViews' which needs to be set to 'portal_content/every_user/general/uwl'
Please check and confirm.
Regards,
Ritu

New GP Task Items do not appear in UWL after clear item cache of GP System

HI, SDN Expert.
After I made some minor change in the GP configuration xml (changing the "createdate" format from "date" to "datetime"), I went to the Cache Administration Page to clear the item cache of my GPSystem. I went to register the item types for all system in the UWL Configuration Page.
After clearing the cache and register the item types, I started initiate some GP tasks, but now all the GP tasks are not appearing in the UWL any more.
I remembered last time the same thing has happened, but the GP tasks started appearing only after a few hours.
Now, it has been two hours wait, I still don't see my GP tasks re-appear.
I wonder any of you know whether this situation is normal? What is the root cause for this situation? And how do I fix this?
Thanks for advise,
KC

Issue resolved.

Resource cannot see their assigned tasks on the Timesheet page

One of the resource is not able to see tasks assigned to him in his timesheet after publishing the project. I have checked all possible reasons listed in the the document below.
http://projeqz.freshdesk.com/support/articles/169136-team-members-cannot-see-their-assigned-tasks-on-the-timesheet-page-or-task-page-in

Hi Project Help,
In addition to the reasons mentionned in the article below (booking type and assignment owner), check the following:
The publish field for the assignments must contains "YES",
The project must be published successfully (with no errror messages in the queue),
The resource must be an enterprise resource and not a local resource,
You must look at the correct time period,
You must ensure that there are no filters in the timesheet view,
Then if it is a newly created task (after the timesheet was created), try inserting the assignment using the "insert row" button,
If none of above work, for the assignments in question, change the assignment owner for any other resource, publish the project, change back the assignment owner to the right resource and publish again the project,
Finally, remove the assignment and create it again (and publish).
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Cannot see photos after upgrading to iPhoto 9.1.3

I upgraded my iPhoto to 9.1.3 and now I cannot see some of my photos. iPhoto indicates the photos are there, but all I see is blank dotted frames where thumbnails should be. When I click on one of the photos I get a gray out frame with an exclamation in the middle. I tried rebuilding the library/thumbnails, extracting using iPhoto LIbrary Manager, checking disk permissions/repairing in Utilties, etc. I tried every suggestions and recommendations I found on the net, but I still cannot see those files. I regret deleting them off my camera disc. These are the only masters I have. So I can't copy them back into the library. If anyone know how I can retrieve these files, please let me know. I also went back in my Time Machine and the same files are all empty gray frames. All I know is that the files were "visible" before the upgrade and now I can't see them after the upgrade. Any suggestions?

Hi - yes I did that last night and unlike rebuilding via control option route, IPLM did not rebuild those files. It stated they do not exist. I double checked by "Show Package Contents" and the master of those files is no longer there. My next move is to go into Time Machine and see if I can restore the library from when the files were still in there (though unseen by iPhoto) and hope the master are still recoverable. If that doesn't work, then I'm at the point of accepting that perhaps I may have lost 51 photos (1 event) during this upgrade. I'm still open to suggestions though.

Cannot see SWFVISU tasks in Portal UWL after re-registering

Similar Messages

Maybe you are looking for