Error configuration tools EPM 11.1.2.0.0 on Linux Oracle Enterprise 64bit
Dear all,
I have my Hyperion EPM 11.1.2.0.0 installed on server Linux Oracle Enterprise 64bit
the installation succeeded, until i try to run configuration, it wont show up. I already tried to run confgtool.sh, then it shows error message like below
============================================================================================
Launching the Hyperion Configuration Utility, please wait...
Running preconfig checks...
Running EPM_ORACLE_HOME check...
EPM_ORACLE_HOME environment variable value:
/home/hyperion/Oracle/Middleware/EPMSystem11R1
JAVA_HOME environment variable value:
/home/hyperion/Oracle/Middleware/EPMSystem11R1/../jdk160_11
EPM_ORACLE_HOME check succeeded
Running .oracle.products check... .oracle.products check succeeded Running Jars manifest check...
Time spent for manifests parsing: 342 ms
Maximum jars depth achieved: 9, while restriction was: unrestricted
Parsed 417 manifests
Total jars and classpath entries encountered: 417
Total not-existing referenced classpath entries count: 56
Total classpath elements to check: 67
ERROR:
/home/hyperion/Oracle/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar
not exists; file depth: 2; referenced from /home/hyperion/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar
referenced from
/home/hyperion/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
ERROR:
/home/hyperion/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar
not exists; file depth: 2; referenced from /home/hyperion/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar
referenced from
/home/hyperion/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
ERROR:
/home/hyperion/Oracle/Middleware/oracle_common/modules/org.apache.commons.beanutils_1.6.jar
not exists; file depth: 1; referenced from /home/hyperion/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
ERROR:
/home/hyperion/Oracle/Middleware/oracle_common/modules/oracle.http_client_11.1.1.jar
not exists; file depth: 2; referenced from /home/hyperion/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_soa.jar
referenced from
/home/hyperion/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
ERROR:
/home/hyperion/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar
not exists; file depth: 2; referenced from /home/hyperion/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_soa.jar
referenced from
/home/hyperion/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
FATAL ERROR: Jars manifest check failed with message "Some referenced jars do not exist"
Exiting in 30 seconds
============================================================================================
i already create new user that have access to oracle middleware home (not ROOT user)
Any idea on this problem?
Thanks a lot
Dear John,
Thanks for replying
i've downloaded and extracted all files on edelivery.oracle.com sections Oracle EPM (11.1.2.0.0) Media Pack for Linux x86-64.
1st symptoms : i've installed it all, at the first attempt, Oracle HTTP Server always failed to install. But on the 2nd try it succeeded (install only oracle http server), so i assumed all part already installed well.
2nd symptoms : after installation, there is config button on the GUI, but after i click it, it only closed the GUI, and nothing happen. So i running configtool.sh from config directories. and it show the error.
For user account, already have full access to relevant directories.
I checked on every logs folder on hyperion home, there is no related logs for this installation. any idea where the install log is?
I can't find "oracle_common" folder, i think this is the root cause, because the error logs referring to jar files from this folder
Thanks
Edited by: nerv18 on Sep 17, 2010 10:24 AM
Similar Messages
-
So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.
A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert -
Error with Nokia Configuration Tool with a E71.
Hi everyone, when using Nokia configuration tool, I tried many times to send a profile saved with a E71 to another E71 but each time I try I get the same error message. When trying to copy the PKI / Certificates group , the soft says "error 500 unexpected condition that prevented to request being fulfilled" ; the others groups work fine. I'm used to do this with the E51 and I've never encountered this problem. I have to program a lot of phones so it would be much easier for me if this method works.
Thank you for your help.Hi Gabor,
If the issue is still alive, please try to connect your N97 device after launching the Nokia Configuration Tool, NCT should detect your N97 device and if there are no profiles created for N97 device, It will prompt you to create a new profile.
I dont see any issue in identifying the N97 device with NCT 6.0.
Please let me know if it does not help.
Thanks & Regards,
Raghava Reddy K -
Error configuring shared services with Oracle 11g database
I've installed Hyperion EPM 11.1.1.3 and orale 11g successfully. My problem though is that when i tried to do the configuration,
the error message states 'Unable to check Shared Services database existence: an error occured.'
---------My Environment:--------
EPM Server: Windows Server 2003 SP1 32-bit
RDBMS: Oracle Enterprise Edition 11g (running on same server 2003)
Oracle Client: 11g (full client install)
SID name :- orcl
------------Here are the components that I've installed--------
- V17397-01(EPM Foundation Services p-1)
- V17369-01(EPM Foundation Services p-2)
- V17370-01(EPM Foundation Services p-3)
- V17371-01(EPM Foundation Services p-4)
- V17389-01(server)
- V17388-01(Client)
- V17390-01(Provider Service)
- V17378-01(Financial Reporting)
- V17380-01(Web Analysis)
- V17398-01(EPM Architect)
- V17402-01(Smart View for Office)
all files are extracted in a single folder using winrar tool.
I can't proceed with the shared services configuration because in just the first page of it, I'm encountering the error Unable to check Shared Services database existence: an error occured.'
I believed the shared services is bundled with the foundation if I'm not mistaken, because I can't find any download related to it on edelivery site.
I tried to configure only the Foundation components but the '*Comman setting*' & '*configure database*' are grayed out so I have no option but to figure out first this shared services configuration.
below are the logs
---------------configtool.log--------------
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, validate
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, connect test
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, driver set
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, server= hyperion
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, whiteSpace remove
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, begin test cycle
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, define driver
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, make connection
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, set URL
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, connection is NOT null
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.DBConnectionForm, DEBUG, DB type string = Oracle
(Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.AbstractProductDBConfigurator, DEBUG, JDBC driver class is hyperion.jdbc.oracle.OracleDriver
(Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.AbstractProductDBConfigurator, DEBUG, Connection URL: jdbc:hyperion:oracle://hyperion:1521;SID=orcl
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, validate CREATE_NEW, no registry DB exists, create it
(Jul 04, 2010, 02:53:29 AM), com.hyperion.hit.registry.RegistryConnection, ERROR, SQL Exception [Hyperion][Oracle JDBC Driver][Oracle]ORA-01031: insufficient privileges CAUSE null
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, ERROR, com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
(Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Unable to check Shared Services database existence: an error occured.
------------configtool_err.log------------
(Jul 04, 2010, 02:53:29 AM), com.hyperion.hit.registry.RegistryConnection, ERROR, SQL Exception [Hyperion][Oracle JDBC Driver][Oracle]ORA-01031: insufficient privileges
CAUSE null
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, ERROR, com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
(Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Unable to check Shared Services database existence: an error occured.
Hope to here from Some one.
Any help would be appreciated. Thank you.Thanx John for your kind reply. i reffred your other posts and those are very helpfull for me.
I don't have any previous ver. of Hyperion. and i created a new database 'Orcl' for configuring the shared services and given the user name as 'hss'. i also tried to delete my old database and and reg.properties file from Hyperion Dir u suggested in some other post. but still its not working.
Today I have started again with fres installation of Windows Server 2003 oracle 11g EPM 11.1.3.
Also I m Installing this on VMware. I hope this is not the issue as i already installed Microsoft Loopback Adapter.
I will let you know the updates.
but still looking forward for your Kind help.
Edited by: Gaurav_Choudhari on Jul 5, 2010 12:37 AM -
I have been banging my head over and over searching for the fix and nothing has worked. Google used to be my friend. I am having doubts.
Windows 2012 Server with IIS installed during the server creation using VMware Vshpere. Here is the log from the SP prep tool.
2014-06-23 10:13:12 - Processor architecture is (9)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Common Startup
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-06-23 10:13:12 - Trying to remove the startup task if there is any.
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-06-23 10:13:12 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-06-23 10:13:12 - Locating the following command line arguments file:
2014-06-23 10:13:12 - C:\sp2013\PrerequisiteInstaller.Arguments.txt
2014-06-23 10:13:12 - Error: This file does not exist
2014-06-23 10:13:12 - Details of the current operating system:
2014-06-23 10:13:12 - Major version number of the operating system: (6)
2014-06-23 10:13:12 - Minor version number of the operating system: (2)
2014-06-23 10:13:12 - Build number of the operating system: (0X23F0=9200)
2014-06-23 10:13:12 - Major version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Minor version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Platform ID of the operating system: (2)
2014-06-23 10:13:12 - Product suites available on the operating system: (0X110=272)
2014-06-23 10:13:12 - Product type of the operating system: VER_NT_SERVER
2014-06-23 10:13:12 - Product type: (7)
2014-06-23 10:13:12 - OS type: (0)
2014-06-23 10:13:12 - Configuring the application's property sheet...
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Management Framework 3.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - PowerShellVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft .NET Framework 4.5
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - Install
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.5.51641
2014-06-23 10:13:12 - A post release .NET 4.5 is installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 6.1.7600.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:12 - Reading version of the following file...
2014-06-23 10:13:12 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:12 - The version is...
2014-06-23 10:13:12 - 1.0.3010.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 10.51.2500.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Server AppFabric
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCC
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheClient is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCS
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheService is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCA
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheAdmin is Installed.
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 2.0.1230.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Information Protection and Control Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.0.959.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 5.0.51212.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - IsInstalled
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:19 - Beginning download/installation
2014-06-23 10:13:19 - Created thread for installer
2014-06-23 10:13:20 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\2\PreA98B.tmp.XML"
2014-06-23 10:13:20 - Error: Unable to install (2)
2014-06-23 10:13:20 - Error: [In HRESULT format] (-2147024894)
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Flags
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PendingFileRenameOperations
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-06-23 10:13:20 - Reading the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-06-23 10:13:20 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-06-23 10:13:20 - Cannot retry
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Management Framework 3.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PowerShellVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft .NET Framework 4.5
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Install
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.5.51641
2014-06-23 10:13:20 - A post release .NET 4.5 is installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 6.1.7600.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:20 - Reading version of the following file...
2014-06-23 10:13:20 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:20 - The version is...
2014-06-23 10:13:20 - 1.0.3010.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 10.51.2500.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Server AppFabric
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCC
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheClient is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCS
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheService is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCA
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheAdmin is Installed.
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 2.0.1230.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Information Protection and Control Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.0.959.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 5.0.51212.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - IsInstalled
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:16:23 - Opening log file
2014-06-23 10:16:23 - Opened action for user
2014-06-23 10:16:23 - C:\Users\ADMINI~1\AppData\Local\Temp\2\prerequisiteinstaller.2014.06.23-10.13.12.logIt looks like you may have extracted the files to C:\sp2013. Can you try installing from a mounted ISO instead? Can you also validate that this is Server 2012 and not 2012 R2?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
ID: How to use the test Configuration tool
Hi all,
I have done one simple file2file scenario and it is working fine( source file is reaching the destination).
By using this scenario, i would like to know the use of test configuration.( which is in Integration Directory).
I have given the input parameters what it has asked.
Header details:-
sender service,sender message interface and namespace.
payload:-
xml format( taken from message mapping)
log result:-
Sender Agreement
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xxxxx:8000/sap/xi/simulation?sap-client=000 User: XIDIRUSER
Please help me how to work with this tool.
Regards,
Deviprasad.hi deviprasad...even i face the same problem whenever i tried using test configuration tool...
i think it means...its trying to make a connection : HTTP connection to ABAP Runtime ......which fails due to lack of proper authorization...
if u login to ur integration builder with a user having the proper authoriztion(i dont know exactly)...u can do the test..... coz during the test there is a connection between java and abap stack...
pls rectify me and convey me if u get the proper answer....or if i m wrong..
pls try to do use the test after login to IB through a user with maximum authorization.... -
OCS 2007 R2 Response Group Configuration Tool Failure
Hello there.
We are bringing back to life an old OCS installation. Customer performed a clean AD reinstall and we are in the process of re-installing OCS 2007 R2. All seems to work fine, except the RGS. When accessing the web tool we get this error:
Response Group Configuration Tool Failure
An unknown error occurred. The operation cannot complete successfully. Please contact the administrator if this problem persists.
Click here to return Home.
the Event viewer for application on the FE shows:
Event code: 3005
Event message: Excepción no controlada.
Event time: 13/05/2014 12:13:01 p.m.
Event time (UTC): 13/05/2014 06:13:01 p.m.
Event ID: a74ea242095f4e8099bca266a7a5cc83
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/Rgs-1-130444779241580315
Trust level: Full
Application Virtual Path: /Rgs
Application Path: C:\Program Files\Microsoft Office Communications Server 2007 R2\Web Components\Acd Files\
Machine name: OCSR2-FE02
Process information:
Process ID: 6504
Process name: w3wp.exe
Account name: domain\RTCComponentService
Exception information:
Exception type: COMException
Exception message:
Request information:
Request URL: https://ocspool.domain.com:443/Rgs/Deploy/Default.aspx
Request path: /Rgs/Deploy/Default.aspx
User host address: 172.16.6.32
User: domain\user
Is authenticated: True
Authentication Type: Negotiate
Thread account name: domain\RTCComponentService
Thread information:
Thread ID: 9
Thread account name: domain\RTCComponentService
Is impersonating: False
Stack trace: en System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
en System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
en System.Management.ManagementObjectCollection.get_Count()
en Microsoft.Rtc.Acd.Management.OcsApplicationContactSetting.Select(String condition)
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.GetContactObject()
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.AddedControl(Control control, Int32 index)
en ASP.deploy_default_aspx.__BuildControl__control15(Control __ctrl)
en Microsoft.Rtc.Acd.Web.UI.TemplateHelper.InstantiateWorkflowTemplate(AcdWorkflow workflow, ITemplate template, ControlCollection controlsToAddTo, String resourceClass, String templateResourcePrefix)
en Microsoft.Rtc.Acd.Web.UI.AcdWorkflowList.CreateChildControls()
en System.Web.UI.Control.EnsureChildControls()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
on the OCS logs I have:
Unhandled exception occurred in the Response Group Service Configuration Tool. The operation could not complete successfully.
Requested URL: /Rgs/Deploy/Default.aspx
User / Host making the Request: domain\user/ 172.16.6.32
Unhandled exception: System.Web.HttpUnhandledException - Se produjo una excepción de tipo 'System.Web.HttpUnhandledException'.
Inner Exception: System.Runtime.InteropServices.COMException
Cause: An unhandled exception occurred.
Resolution:
Check the exception.
Windows server is installed in spanish, if you wonder why the mix in languages.
We have been battling with this error for the last 2 weeks. Any help is greatly appreciated!
FRHi,
Please check the configuration of the Response Group Service with the help of the link below:
http://technet.microsoft.com/en-us/library/dd441277(v=office.13).aspx
Please check the OCS components that are required to implement the Response Group Service below:
Application Server and Response Group Service
Language pack
Administrative tools
Web Components Server
Internet Information Services
Microsoft Office Communicator 2007 R2
You can try to use the workflows that you crated to validate the deployment.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
SQL Server Configuration Tools Disappeared
I know I used to have Server Configuration Tools, but when I just looked for it, it seems like it has disappeared. I'm looking at this.
I'm getting this login error.
I used to be able to reset SQL Server using the Configuration Tools, but now I can't reset it, and I can't login.
Please help!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.Hello,
When you connect using SSMS ( SQL server management studio) in server name give like
hostname\mssqlserver--if it is default instance
hostanme\instancename if it is named instance
hostname\SQLEXPRESS is it is express edition
now go to run tyoe services.msc look for SQL server services check if it starte dor not if not please start in try connection using above information
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Shared Services Database configuration Failed - EPM 11, Linux, Oracle 11g
Hi, I am trying to install Oracle EPM 11 on linux machine and I obtain a error when I configure Shared Services repository. The error log say:
com.hyperion.hub.HubDBConfigurator, ERROR, Unable to delete entries in OpenLDAP, failed with result code 1
com.hyperion.hub.HubDBConfigurator, ERROR, Error: java.lang.Exception: Unable to seed initial entries in OpenLDAP
com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error: com.hyperion.cis.config.ProcessingException
org.apache.catalina.core.ApplicationContext, ERROR, StandardWrapper.Throwable java.lang.NullPointerException
org.apache.catalina.core.StandardContext, ERROR, El Servlet /interop lanzó excepción de load() java.lang.NullPointerException
I am using Oracle Enterprise Linux 5, Oracle Database 11g, and default application server.
My machine have Intel dual core processor, 2 gb ram, 50 GB availables on Oracle EPM installation partition.
I hope that some body can help me!!
best regards,
ASolar.Hi ASolar,
Were you able to solve this problem? If so if you could tell us how you solved it we would greatly appreciate it.
We have had the same issue trying to re-configure the Foundation service on Sun Solaris (SPARC 64bit) with Oracle 10G.
(Oct 14, 2009, 00:11:03 PM), com.hyperion.hit.registry.Registry, ERROR, Exception when trying to store the component
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.RangeCheck(Unknown Source)
at java.util.ArrayList.get(Unknown Source)
at com.hyperion.hit.registry.JDBCRegistryUtils.storeComponent(JDBCRegistryUtils.java:612)
at com.hyperion.hit.registry.JDBCRegistryUtils.saveComponent(JDBCRegistryUtils.java:166)
at com.hyperion.hit.registry.Registry.storeComponent(Registry.java:2749)
at com.hyperion.hit.registry.Registry.getInstance(Registry.java:353)
at com.hyperion.config.wizard.impl.RegistryWizardRule.validate(RegistryWizardRule.java:66)
at com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel.queryEnter(WizardFormAdapterPanel.java:80)
at com.installshield.wizard.awt.AWTWizardUI.currentBeanChanged(Unknown Source)
at com.installshield.wizard.swing.SwingWizardUI.currentBeanChanged(SwingWizardUI.java:842)
at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1822)
(Oct 14, 2009, 00:12:36 PM), com.hyperion.hub.HubDBConfigurator, ERROR, Unable to delete entries in OpenLDAP, failed with result c
ode 1
(Oct 14, 2009, 00:12:36 PM), com.hyperion.hub.HubDBConfigurator, ERROR, Error:
java.lang.Exception: Unable to seed initial entries in OpenLDAP
at com.hyperion.hub.HubDBConfigurator.refreshOpenLdap(HubDBConfigurator.java:573)
at com.hyperion.hub.HubDBConfigurator.configure(HubDBConfigurator.java:174)
at com.hyperion.foundation.config.FoundationDbConfigurator.configure(FoundationDbConfigurator.java:62)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Many thanks,
James -
Test Configuration Tool: Sender Agreement Not Found
Hi, All:
We have new XI3.0 setup and I just want to test simple file to file scenario, but the file was picked up by sender file adapter, however, there is no message sent to Integration server.
When I use Test Configuration Tool, the sender agreement is green, however, it also mention Sender Agreement Not Found, see below:
================================================
Sender Agreement
================================================
futhermore, Interface Mapping is not found either. Actually, Interface has been created on IR. Sender Agreement also created in ID.
Anyone who has idea about these two errors ?
Thanks in advance
LiangHi, Raj and Srinivas:
Thanks for your reply.
First of all, all the objects are activated, secondly, when create sender agreement, I just need to input the Sender Service Name / Sender Interface / Sender Interface Namespace. Then finally select commnication channel.
For any Receiver sides, they are grey out, I am not able to input anything.
So, there is no "*" in any fields.
I doubt if there is any setup wrong, especially for adapter engine, maybe some modules that are not functional for file adapter engine, since I also see other problems, I might post them as separate thread.
In Adapter monitor page, I did not see the adapter.
In RWB, if I use IE, there is Error in the page, using Firefox, it is OK.
Thanks And Regards !
Liang -
Error configuring identity management
Hi, i´ve installed a middle tier instance of AS 10g , and i want to register it into a oid instance, but when i try to do this trough EM it fails and show the following information in the logs, could anobody help us, I'm sure that the oid is up and running.
Thanks
Santiago
1st Log
Error
Error configuring identity management. Some of the plugins in this config tool
failed. See the log file /oracle/product/10.2/config/infratool.log for more
details.
2nd Log
heck /oracle/product/10.2/sso/log/ssoreg.log for details of this registration
Process exit code 1
Configuration succeeded for IASProperty
Configuration succeeded for IAS
Configuration succeeded for LDAP
Configuration succeeded for JAZN
Configuration succeeded for DCM
Configuration failed for HTTPD
Configuration failed for MODOSSO
[oracle10@gncser10 config]$ more /oracle/product/10.2/sso/log/ssoreg.log
Thu Dec 14 20:06:35 COT 2006 ========================================Thu Dec 14
20:06:35 COT 2006 OracleAS Single Sign-On Registration Tool
Thu Dec 14 20:06:35 COT 2006 ========================================Thu Dec 14
20:06:35 COT 2006 Parameters passed to SSO registration tool :
param0:-site_name param1:bpel1012.gncser10.co.gasnatural.com param2:-mod_osso_ur
l param3:http://gncser10.co.gasnatural.com:7777 param4:-config_mod_osso param5:T
RUE param6:-oracle_home_path param7:/oracle/product/10.2 param8:-u param9:oracle
10 param10:-config_file param11:/oracle/product/10.2/Apache/Apache/conf/osso/oss
o.conf param12:-admin_info param13:cn=orcladmin
Thu Dec 14 20:06:35 COT 2006 -DinstallTypeThu Dec 14 20:06:35 COT 2006
-DoldOracleHomeThu Dec 14 20:06:35 COT 2006 -DoldOHSUser=root
Thu Dec 14 20:06:35 COT 2006 SSO database is jdbc:oracle:thin:@ldap://192.9.200
.188:3060/asdb,cn=oraclecontext
Thu Dec 14 20:06:36 COT 2006 Exception while creating database connection :java
.sql.SQLException: Io exception: The Network Adapter could not establish the con
nection
java.sql.SQLException: Io exception: The Network Adapter could not establish the
connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:137)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:174)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:286)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:327)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
433)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:150)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
n.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:571)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.security.sso.SSORegistrar.main(SSORegistrar.java:311)
Thu Dec 14 20:06:36 COT 2006 Check if your database is up and running.Hi,
Saw this in the SSO registration log:
Thu Dec 14 20:06:36 COT 2006 Exception while creating database connection :java
.sql.SQLException: Io exception: The Network Adapter could not establish the con
nection
Thu Dec 14 20:06:36 COT 2006 Check if your database is up and running.
Is your infrastructure database running? Can you connect to it via sqlplus or tnsping it from your middle-tier?
Jim -
9iAS Linux - ADMN 100999 - configuration tools aborted
Hi
I installed on SUSE Linux 8.0 the 9iAS R2, only the option A - J2EE and WebChache. Now I have following problems.
1. Some configuration tools (OC4J, OPMN, DCM)were not initialized in the end of the installation. I read other postings with the same problems, but i never read a solution of these problems.
2. After installing, i want to start the http server manually (dctml start -ct ohs) , but it doesn't work. I got the error message ADMN 100999. dctml -resyncInstance was not successful.
Other admins has same problem, they reset the admin password and it worked.
But I can not use the script resetiAspassword.sh because I never installed the infrastructure.
If i want to start the http-server with enterprise manager (EM worked) I got an EMException.
I have no idea to resolve the problems, perhaps you
Thank YouHello Diana, i am having the same exact problem except it is on rh7.2. my initializations were also a problem: i have emctl but not dcmctl and therefore cannot run http. i am convinced i need to de-install/wipe clean/re-install. u r lucky because u r runninng on suse 8. u may consider de-install/re-install. i am going to wipe the directory clean this time becaue i have already tried de-install/re-install many times. thanx, david brown. webitplanet.com.
-
Configurations tools ( netca,dbca ,assistants) not started during install
Friends,
I am trying to install Oracle 9iR2 on redhat advanced server.
We copied the files into a staging area.During
install it asked for Oracle.swd.jre file which i checked
not there.
But i ignored the error message and finished the
install.Installation went through successfully but the
configurations tools netca,dbca and agent assistants have
not started. Apache server has started sucessfully.
I have done installs earlier on Redhat 8 but i never
had problems like this.I checked the staging area and i could able to see a directory like oracle.swd.jre in
Disk1/stage/Components/oracle.swd.jre but not the file.
I will be glad if anyone can tell me the work around
for this.
Regards.Friends,
I am trying to install Oracle 9iR2 on redhat advanced server.
We copied the files into a staging area.During
install it asked for Oracle.swd.jre file which i checked
not there.
But i ignored the error message and finished the
install.Installation went through successfully but the
configurations tools netca,dbca and agent assistants have
not started. Apache server has started sucessfully.
I have done installs earlier on Redhat 8 but i never
had problems like this.I checked the staging area and i could able to see a directory like oracle.swd.jre in
Disk1/stage/Components/oracle.swd.jre but not the file.
I will be glad if anyone can tell me the work around
for this.
Regards. -
Hi,
Does anyone have information on E5 and Nokia Configuration tool. It's not on the list of supported devices. This seems a bit odd, because it is an E-series machine. Any news on this would be appreciated
thanksI did a connection test and the results are succesful
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (mnxksrv056.digital.com:8100)
5. The host name mnxksrv056.digital.com was resolved successfully.
6. The Web AS ping service http://mnxksrv056.digital.com:8100/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://mnxksrv056.digital.com:8100/sap/bw/BEx/ was obtained successfully.
I` am still puzzled where its picking up that hostname and the coming up with an error
Any ideas are welcome -
MFE on 6120 classic - configuration tool / bulk co...
We have a number of 6120 we need to configure for MfE and don't really want to sit there and configure them by individually by hand. Would prefer say SMS, or using a PC based app. to do so.
Have downloaded the configuration tool (v5); which recognises the phone, but errors when a profile is imported or exported to it.
the phone has firmware 6.01 on it.
Is there any easy - and cheap - way to bulk configure these - most items, such as the mail server, domain, access point are the same, the variations are user name, pw, email (and even then we know the user name and email).
don't really want to set up a lot of back end infrastructure to do this.
any ideas etc appreciated.We have a number of 6120 we need to configure for MfE and don't really want to sit there and configure them by individually by hand. Would prefer say SMS, or using a PC based app. to do so.
Have downloaded the configuration tool (v5); which recognises the phone, but errors when a profile is imported or exported to it.
the phone has firmware 6.01 on it.
Is there any easy - and cheap - way to bulk configure these - most items, such as the mail server, domain, access point are the same, the variations are user name, pw, email (and even then we know the user name and email).
don't really want to set up a lot of back end infrastructure to do this.
any ideas etc appreciated.
Maybe you are looking for
-
Error Occurs when starting weblogic server 7
Hi Gurus, I get these errors when i start my weblogic server, i am not able to find the solution. please some one help me out Starting WebLogic Server... <Sep 5, 2006 4:43:24 PM IST> <Notice> <Management> <140005> <Loading configurati on D:\bea\user_
-
MegaPC 180 - Programming LCD Panel
Hi All, I recently built my MegaPC180 and what a lovely machine she is too!. My old machine sounded like an aircraft taking off!, this is nice and quiet with lots of mod-cons in a SFF barebone. One thing I'd like to take advantage of is the LCD pane
-
Error when installing Vodafone mobile Internet
I have purchase a Toshiba laptop around 2002, Windows XP Home Edition, version 2002, Service Pack 1. I have only used it 3 times during this time. I want t to install Vodafone Mobile internet. However I am having problems. The install Shield Wixzard
-
I've not used VS Express for a couple of weeks, and now it comes up with an error message when I double-click on a solution's icon. Of course, as the message isn't cut-and-pasteable I can't reproduce it here, but it implied that some element in VSE
-
SOS, need solution! Applet!
Hi all, I urgently need solution for this program in Java, if sobebody can make this program for me, or even tell me where I can find solution and how? Thanks You are required to create an interface with the following choices: �Choice1: Enter a New R