Error - No update server found for context
Hi
I'm trying to write a BSP page that sends E-mail via sap connect.
I did try to get the demo program bsptutorialmail from package SBSP_DOCU to work.
When I try to send an E-mail, the program terminates with
500 SAP Internal Server Error
Error message: No update server found for context :b: ( type of termination: ABORT_MESSAGE_STATE )
I can in my system send e-mail from a standard program using the function Z_E_KEG_SEND_SIMPLE_EMAIL that I found in a weblog here on sdn
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
I have not been able to find any info on this error, just a hint that I need to configure some RFC destination ?
Any hints on how to solve this are very much appreciated
I found nearly that exact same error message in an old MM OSS note - 333941. The error message there was in ME47:Termntn A:No update server found for context:X. Now that was context:X and not context:b like in your error, but perhaps the solution then will lead you to some clues. The following were the code changes of that OSS note:
Delete Block
SET LOCALE LANGUAGE EKKO-SPRAS. "CF 4.5A TODO
XEINA-SORTL = XEKPO-TXZ01.
Insert Block
DATA: S_LANGU LIKE SY-LANGU.
S_LANGU = SY-LANGU.
SET LOCALE LANGUAGE EKKO-SPRAS. "149717
TRANSLATE XEINA-SORTL TO UPPER CASE. "149717
SET LOCALE LANGUAGE S_LANGU.
On one hand this correction might be telling us that this error has something to do with language, or more specifically the act of not returning the local language to the logon language. On the other hand, maybe it is just leading us on a wild goose chase.
Message was edited by: Thomas Jung
Similar Messages
-
No update server found for context :e:
i have sap netweaver 7.0 abap trial version on my machine. i have navigated to se80 and write a program while walking with this weblog :
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6270 [original link is broken] [original link is broken] [original link is broken]
the program is called z_hello_world_local :
REPORT Z_HELLO_WORLD_LOCAL.
data output_text type string.
output_text = 'Hello World'.
write output_text. "obsolete statement
any way when i have tried to save or run the program it returns the error:
no update server found for context :e:
also i must say that <u><b>when i clicked the as abap wp table, on sapmmc, the work processes like dia, upd, enq, btc, spo seem not to be worked ("no" in the line under start title). only the first dia works (it has a yes under start)</b></u> what can i do for this second problem?
any ideas?
thanks
Edited by: developer developer on Aug 23, 2008 5:40 PM
Edited by: developer developer on Aug 23, 2008 6:26 PM
Edited by: developer developer on Aug 24, 2008 10:06 AMI came trough the same problem...This forum post might help you -;)
[Software Downloads;
Transaction SM13 is the key -;)
Greetings,
Blag. -
Security lending no update types found for prod. type 77B, trans.type 100
Hello
In FTR_CREATE for product type 77B Open-Ended Securities lending I get following error:
No update types found for prod. type 77B, trans. type 100, sec.acct cat.
Message no. TRS0835
how do I solve this?
regards
Arjan
Edited by: Arjan Hogenes on Dec 8, 2009 6:51 PM
I have in customizing in "Update types for position update" for product type 77B, transaction type 100:
Product Type 77B Open-Ended Securities Lending
Transactn Type 100 Loan
Update Type for Open SL1990-
Update Type for Close SL1992+
Update Type for Underlying / Exercise OTC003
Edited by: Arjan Hogenes on Dec 8, 2009 6:55 PM
Edited by: Arjan Hogenes on Dec 8, 2009 6:58 PMPrasad,
I followed your instructions and changed customization for Update type for Position Update type with standard Update types;
OTC001
OTC002
OTC003
but I still get the same error.
In TRM-Trans Mgr-OTC Derivatives-Transaction Mgt-Update Type-Assign FLows type to Update Types
I have:
6 Derivatives 1990 Securities Lending: Basis Flow - Outflow SL1990- Securities Lending: Basis Flow
6 Derivatives 1991 Sec. Lending: Lending Revenue + Inflow SL1991+ Securities Lending: Lending Revenue
6 Derivatives 1992 Sec. Lending: Reverse Posting + Inflow SL1992+ Securities Lending: Reverse Posting
6 Derivatives 1993 Securities Lending: Agent Fee - Outflow SL1993- Securities Lending: Agent Fee
6 Derivatives 1994 Sec.Lending: Cash Collateral + Inflow SL1994+ Securities Lending: Cash Collateral Inflow
6 Derivatives 1994 Sec.Lending: Cash Collateral - Outflow SL1994- Securities Lending: Cash Collateral Outflow
In TRM-Trans Mgr-Listed Derivatives-Transaction Mgt-Flow Type-Assign FLows type to Transaction Type
I have
77B Open-Ended Securities Lending 100 Loan 1990
77B Open-Ended Securities Lending 100 Loan 1991
77B Open-Ended Securities Lending 100 Loan 1992
77B Open-Ended Securities Lending 100 Loan 1993
77B Open-Ended Securities Lending 100 Loan 1994
77B Open-Ended Securities Lending 100 Loan 1995
Any other suggestion for the error "No update types found for prod. type 77B, trans. type 100, sec.acct cat.
Message no. TRS0835"?
many thanks in advance. I Look forward to your answer!
kr
Arjan -
There was an error while updating row count for "SH".."SH".CHANNELS
Hi All,
Am new to OBIEE.Pls help in this regard.
Am building the physical layer as per Repository guide.When am importing the data in to this,am getting the below error.
*"There was an error while updating row count for "SH".."SH".CHANNELS" :"*
channles is the table name and having 5 rows.
but am able to see the data in the sql prompt. like SELECT * FROM SH.CHANNELS then 5 rows data would be displaying..
pls help in this regard and where is the excat problem?
Thanks,what is the error?
Make sure that your connection pool settings are okay..
Make sure that, you are using correct driver in case of if you are using ODBC dsn..
Also make sure that, your oracle server is running... TNS and Oracle server services -
Error-No Warehouse FC found for plant 1010/valuationh classs 3001
Hi,
Funds Management is active in my company code.Budgeting is on cost center level.
My question is in many PO's and PR's we dont input account assignment as cost center because we dont require to put in it so now while creating PR for a BOM material im getting error "No warehouse FC found for plant 1010/valuation class 3001"
When i select account assignment as Cost center it is working but i dont want to select that assignment as per requirement.
And when i select Account assignment as UN (unknown that is also working fine.
What is the possible solution to get rid iof this error.
Thanks
Deepaconsider it as a high priority
-
Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...
Hi All,
My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
Message NO k5011.
As this is more ralaing to the costing sheet, this refers to controlling module.
We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the 6.0 verion.
Can anybody suggest the reason for the above error.
Thanks & Regards
ShankarHI,
whats the message class, message number?
BR Christian -
HT1414 no update server found? is it done?
No update server found. Is the ipad done ? Shows apple logo,turns on and off but won't open up.
That indicates the update failed. You'll have to force it into recovery mode and restore it as explained here: http://support.apple.com/kb/ht1808. (Restoring it will update it.)
-
Error while updating budget plan for a user in peoplesoft
Hi All,
We are using peopletools 845 and app 8.8 some users are getting this wl error while updating some transactions in PS find the error below,
Message from the ISAPI plugin:
Cannot open TEMP file 'C:\WINDOWS\TEMP\_wl_proxy\_post_8500_4' for POST of 7328 bytes: GetLastError() 5
Build date/time: Oct 25 2004
Change Number: 452998
HTTP/1.1 500 Internal Server Error Connection: close Date: Wed, 10 Jun 2009 16:42:27 GMT Server: Microsoft-IIS/6.0 MicrosoftOfficeWebServer: 5.0_Pub X-Powered-By: ASP.NET Content-Type: text/html
Message from the ISAPI plugin:
Cannot read -1 bytes of postData from tmp file 'C:\WINDOWS\TEMP\_wl_proxy\_post_8500_4': GetLastError() 0
Build date/time: Oct 25 2004
Change Number: 452998
HTTP/1.1 500 Internal Server Error Connection: close Date: Wed, 10 Jun 2009 16:42:27 GMT Server: Microsoft-IIS/6.0 MicrosoftOfficeWebServer: 5.0_Pub X-Powered-By: ASP.NET Content-Type: text/html
Thanks in advance!Hi,
Try having a look at this document
E-WL: Message From the ISAPI Plugin: "Cannot read 8192 bytes of postData from tmp file" [ID 664043.1]
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=664043.1 -
ICal Error: "No virtual host found for iCal Service" - Help!
Trying to set up iCal on OS X Server 10.5.6
Server is up and running and successfully providing web services on its FQDN. Server is not currently used to support network users / services, but as and when it does it will be the Master Opendirectory server.
I have created a couple of test accounts on the server (simply in the Users group) and enabled both for Calendar Access.
I have provided the details of the FQDN on the iCal page, and checked that the default port (8008) has been opened in the firewall.
In web services there is one virtual domain (using name based virtual server) and the default domain in operation. Both appear to be functioning as would be expected.
When I click on 'start service' for iCal, I get this error.
"No virtual host found for iCal service"
I cannot find any information about this in iCal manual, or online documentation. Can anyone here provide pointer to where this information is, or what it means?
Would be most grateful.Hey there,
See if any of the solutions provided in either of these older threads can steer you in the right direction.
http://discussions.apple.com/thread.jspa?threadID=1201737
http://discussions.apple.com/thread.jspa?threadID=1242823&start=0&tstart=-3
B-rock -
Error - While Updating Metalink Credentials for Patch Wizard in R12
Error coming while doing : Update Metalink Credentials for Patch Wizard
"Unable to connect to Metalink. Please enter a valid Metalink userid and password. Please also check if the Web Proxy Setup information is correct."
We are not using Proxy Server. When i try to login to Support.oracle.com using same user it works. But throwing error using Patch Wizard. Can anyone tell me that why this error is coming ??
Regards,
Priyanka PawarRegarding Backup as it is Application Level patch, is it fine if i take Backup of $ORACLE_HOME for Application Tier ?You will have to take a full backup (which means all the application/database tier files -- i.e. all the directories after you shutdown all the services cleanly).
1. After that I need to 'Enable Maintenance Mode' using adadmin utility
applmgr>$adadmin
2. Source Env file for Application Tier
applmgr>$ . SID_hostname.endYou mean env file.
3. Stop all Application Services
applmgr>$ . adstpall.sh
4. Copy patch to Directory
5. Unzip
6. applmgr>$ cd /u01/patch/10629956
7. After that apply patch using adpatch utility
applmgr>$ adpatch
8. Disable Maintenance Mode
9. Start Application Tier Services
10. Retest Correct.
Can I follow these steps ? Yes.
By default value of parameter "apply" is "y" so does it apply patch intest mode? I nned to specify it to "n" or should i test it first as i m doing this first time. You do not need to test it if you take a backup, and this is a small patch so you should be OK :)
If in case anything goes wrong can I restore my Application Services back using old Oracle_Home backup ?Yes.
Note: Please edit the post before the previous one as it contains the contents of MOS document and this violates Oracle support agreement policy.
Thanks,
Hussein -
Error: No Logon Data found for Lotus Notes System
Hi,
I have created a lotus notes sytem and have configured the transport also.
But even then i am not able to create appointment under collaboration.
I get the error msg :
<b>"No logon data found for the system 'system name' ".</b>
And when i tried to change the <b>User Mapping</b> , it gives the error msg,
" Error in accessing user mapping data for selected system"
Pls help. Thanks in advance.Hi all,
Here are a few solutions which may help you solve your problem
1) Access the lotus system with its fully qualified hostname in the system credentials and in the Lotus transport as well.(Ping from portal side and Domino side to each other to check the connectivity as well as the heartbeat check i.e.Launch http://<hostname>:<port>/<servletDirectory>/CalendarServlet in the browser to check the connectivity)
2) In the servlets.properties file,add the following(marked in bold)
servlet.CalendarServlet.initArgs=saveperiod=50,width=7,AttachmentFolder= D:
temp,useEmail=true,<b>debug=true,logResponse=true</b>
This will help you find on the Lotus console what the possible error could be.
3) Run the command 'load http' (coz the http protocol might not have been loaded) on the lotus console and restart the lous server.
If this is the case then make the following entry in the notes.ini file.
Against the list of ServerTasks add HTTP
Regards,
Prathamesh -
Error getting the EJB Handle for context name: User
I am getting EJB Handle for context name: User.
1) I specified ejb's and datasource in the ejb-jar.xml in the session tags.
<session> </session>
and I also included ejb's and datasource in the sun-ejb-jar.xml still I am getting the above error I am new to EJB how can I resolve this?What is the Oracle application server version?
JDeveloper 11g supports direct deployment to Oracle Application Server 11g
http://www.oracle.com/technology/products/jdev/collateral/papers/11/newfeatures/index.html -
Idocs error: Non-updated Idocs found in Business Inormation Warehouse
Hi
I have found this error for delta load.
"Non-updated Idocs found in Business Information Warehouse"
I know that if the non-updated idocs found in source system, we can use
BD87 to manual update.
But it is with in the BI.
Can someone please help with steps involved.
ThanksI will suggest you to set the delta load request to red and then reset the delta flag. Reload the last repested delta will include all missing idocs. That way it is much cleaner.
Good Luck,
CL -
Hello everyone,
After I have finished with Lync FE, Monitoring and Archiving, and WAC server I was going well with Edge server until I got to the point of publishing the topology with Edge Server.
First time publishing went well but I wanted to place the configured IP addresses in the Edge server IP topology with a different IPs and when I published i got the below error.
I tried looking in the trusted Services in Configuration OU using ADSI Edit but never was able to figure out how do I find the duplicated entries? I used also used Softerra LDAP adminsitrator and was able to find 5 values but not sure which one to delete
among them.
Could anyone advise where to look? I'm posting the error as well below
Error: Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local".
▼ Details
└ Type: InvalidDataException
└ ▼ Stack Trace
└
at Microsoft.Rtc.Management.Deployment.AD.ADSessionExtension.FindUnique[TResult](ADSession session, QueryScope scope, ADObjectId containerId, QueryFilter filter, String name, Boolean throwOnMissing)
at Microsoft.Rtc.Management.Deployment.Core.CompatEdgeProxy.Remove(ADSession session, String edgeProxyFqdn)
at Microsoft.Rtc.Management.Deployment.Roles.AccessEdge.GlobalDeactivate(IService service)
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog[T](Action`1 action, T arg)
2/19/2014 12:25:28 PM
Error
└
Error: An error occurred: "System.IO.InvalidDataException" "Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local"."
Mohammed JHHi,
Glad to hear you have solved the issue and shared the train of thought.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Error - No defining declaration found for implementing declaration of partial method
Hi,
I am quite new to c# and using lightswitch to create a webform. However, I have to write a code as per the webform logic and requirement and now getting error on this part -
partial
voidgridDeleteSelected_Execute(StringID)
The error is - No defining declaration found for implementing declaration of partial
method
Could someone please tell how this error can be resolved ? Please find the code attached below.
Thanks.
using System;
using System.Linq;
using System.IO;
using System.IO.IsolatedStorage;
using System.Collections.Generic;
using Microsoft.LightSwitch;
using Microsoft.LightSwitch.Framework.Client;
using Microsoft.LightSwitch.Presentation;
using Microsoft.LightSwitch.Presentation.Extensions;
namespace LightSwitchApplication
public partial class EditableServicesGrid
partial void gridDeleteSelected_CanExecute(ref bool result)
partial void gridDeleteSelected_Execute(String ID)
if (!string.IsNullOrEmpty(ID))
string sqldelete = "Update services set DELETED_FLG = 'Y' WHERE ID IN ( " + ID + ")";partial
voidgridDeleteSelected_Execute(StringID)
The error is - No defining declaration found for implementing declaration of partial
method
Could someone please tell how this error can be resolved ? Please find the code attached below.
Could you explanation what your requirement is? detailed information is necessary.
Maybe you are looking for
-
Can't print after 9.4.2
Hi, After updating Acrobat Pro from 9.4.1 -> 9.4.2 yesterday, a couple of our users can no longer print pdfs. I've uninstalled and re-installed twice, and I can confirm that it is the 9.4.2 update that breaks it. I print from 9.4.1, install the upd
-
Audigy FX Control Panel does not recognize my card
I have Windows 7 Pro, 16gb Ram, Intel i5-2400 processor. I just installed my new Blaster card and software two days ago. When I click the Taskbar icon for the Audigy FX Control Panel, I get the message "The current selected audio device is disabled,
-
Need your Help with Swapping SWF File Problem
Hello, I have two separate Flash SWF files which I would like upload into the same HTML file. But I would like to load only one of them at the time and would like to have a Button on each SWF Flash file which causes the other SWF to be loaded. hmmm..
-
Hi Gurus, I am trying to download MATERIAL from R/3 to SRM using the transaction 'R3AS'. But the download does not happen I end up getting the following error message in transaction SMW01. BDOC STATE IS F05 BDOC STATE DESCRIPTION Information (No Pro
-
If a photo is opened in LR I cannot move to edit it in PSE 12