Lenovo System Update 5 does not work on my B580

Hello,
the Lenovo System Update 5 program does not work on my B580 laptop.
After 16% of the status bar the program says "there are no packages for your PC".
That can't be true, because i haven't installed all drivers and programs.
I got .NET Framework 4 on my laptop.
What will solve the problem?
Greetings from germany
MAD3000

i also have the same problem with my B480

Similar Messages

System update does not work for x200s

Hi All,
The problem is that ThinkVantage System Update can not find any packages.
("no package applicable to your system were found")
ThinkPad X200s 7466-3UG
Windows7 Professional
I have installed the version 4.01.0015 from 15 Aug 2011 (systemupdate401-2011-07-25.exe)
Could you please suggest anything?

Ok than, the problem is not in registry.
Please take a look at this thread, might be of help.
http://forums.lenovo.com/t5/ThinkVantage-Technologies/System-Update-not-getting-updates/td-p/655779
Too, try uninstalling System Update (completely remove it) install Windows 7 sp1 (if not done already) and reinstall System Update again. Do not restart immediately, wait a few moments and than restart. See what's happens.
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

System update does not work with Win7 SP1 RC Wave 1

Just a heads up. System Update on win7 64-bt SP1 RC Wave 1 fails to query available updates.
My guess it is because the operating version number is incremented from 7600 to 7601.
If Lenovo would like me to work with them on testing this combination, please contact me.

Hello,
You may need to wait until Windows 7 Service Pack 1 is released (or shortly thereafter) for Lenovo's ThinkVantage System Update to work with the operating system at its new patch level.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

Automatic update does not work

On my both computers (Windows 7, Window 8), the automatic update does not work at all, although it is activated in the options. All I get in the Firefox info box is that an update is available, with a link that I have to follow to download the installation file and install it manually. No difference even if I wait for weeks, the update is neither downloaded nor installed automatically. The problem persists in all Firefox versions since version 3.6.16 / 2011 (the last update in the chronicle). Note that the automatic update seems to perform well in the Windows XP mode of my Windows 7 system !

It will update eventually; there may have been availability problems on the update servers.

Systems preferences does not work

My Systems Preferences does not work, either reminders and messages... since Mavericks(10.9) Programs do not respond and Macbook air is not responding.... Help.....

Well, you are certainly correct that the fact that the "wired" machines work sure doesn't rule out a faulty router....But that's why (as part of a process of elimination troubleshooting scheme) I hooked up my old Linksys Router, and got the same results. Now...What are the odds of 2 separate routers acting the same way? Especially when both worked fine on my TIPB and even on my MBP until a few months ago. Plus, my 12 year old son can pull a wireless signal from the router on his console games (xbox360, Wii, PS3) with no problem
Believe me, my first thought was to go out and buy another router, but when I swapped routers and got the same problem, I began to look elsewhere, eventually coming here for help and knowledge.
I did the SMC reset to no avail. I'm not sure about the stuff in System Configuration....By "pull" do you mean to delete all the files in this folder? Move them to a temporary folder? Should I just deal with the folders that have "IP" in the "bundle" file name?
Any help would be greatly appreciated!
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.8) 23" Cinema Display and 8 gig on G5 Dual
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.7) 23" Cinema Display and 8 gig on G5 Dual

HT1338 my software update does not work using OS X 10.6.8: update icon just stays static and times out, although web is online

My software update does not work: the icon jams and then times out, although web is online. How to resolve??

Snow Leopard DVD:
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
When you've installed SL it will be 10.6.3. You need to update that to 10.6.8 with the combo installer from http://support.apple.com/kb/DL1399 - that gives you access to the Mac App store.
Lion is only available by phone also - same number and they'll give you a download code to use in the Mac App Store.
If you're going to Mountain Lion you don't need to install Lion first - you can do it straight from Snow Leopard 10.6.8.
Specifications;
Snow Leopard 10.6.x:
Lion 10.7.x;
Mountain Lion 10.8.x:
As for Lion, but also must be one of these groups;
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminium, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
<sorry to repeat, guys, but following links isn't always a given with OPs>

System Update does not start

Windows 7 x64. I launched System Update V4 from Solution Center. It automatically updated to Version 5.2. System Update 5.2 seems to start (the Tvsukernal.exe is showing active in Task Manager) and the icon is on the task bar, but no System Update window ever appears. I have uninstalled and reinstalled multiple times. I would like to update my system, but how?

But how exactlly does one accomplish deleting SUService between uninstall of System Update 4 and install of System Update 5? When I launch System Update V4 it immediately downloads and starts installing V5. So, while the installer was running I deleted the SUService. Still same problem. I uninstalled System Update completely, all files removed including SUService. Reinstalled with System Update 5.02. Still same problem. System Update seems to launch, appears on the task bar, but its window will not open.
Here is the content of the log file created after starting System Update:
[Lenovo System Update build: 2013-4-11 5.02.0011] 6/5/2013 8:50:42 AM
Info 2013-06-05 , 08:50:42 at Tvsu.Environment.EnvironmentManager..ctor() Message: Starting Environment Manager...
Info 2013-06-05 , 08:50:42 at Tvsu.Nls.NlsResources..ctor() Message: Starting the instance of NLS@Runtime
Info 2013-06-05 , 08:50:42 at Tvsu.Nls.NlsResources..ctor() Message: The active language is: EN The default language is: EN The OS language is: EN The language loaded type is: OS
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Scheduler Manager Starts...
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Obtaining information from the Enviroment Manager...
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Validating Starts...
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Validating Ends...
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Sending Values to the SchedulerParser...
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - Receiving Values from the SchedulerManager
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - Starting Validation Process!
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - All validations have been processed!
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - Writting to the registry...
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - All values were saved on the Registry!
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - Reloading Scheduler
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - The Scheduler was reloaded
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: All values sent to SchedulerParser...
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Scheduler Manager ends...
Severe 2013-06-05 , 08:50:42 at Tvsu.Sdk.SuSdk.StartApplication() Message: Application runs with the framework: 2.0.50727.5466
Info 2013-06-05 , 08:50:42 at Tvsu.Engine.DataBase.InitializeDataBase() Message: Initializing the DataBase from file: updates.ser
Info 2013-06-05 , 08:50:42 at Tvsu.Sdk.SuSdk.StartApplication() Message: Starting the Application
Info 2013-06-05 , 08:50:42 at Tvsukernel.Logic.GUIController.StartGUI(Boolean showsplash) Message: Starting GUI...
Info 2013-06-05 , 08:50:42 at Tvsukernel.Logic.GUIController.StartGUI(Boolean showsplash) Message: MainFrame created successfully
Info 2013-06-05 , 08:50:42 at Tvsukernel.Logic.GUIController.StartGUI(Boolean showsplash) Message: GUI -- Welcome screen
Info 2013-06-05 , 08:50:42 at Tvsukernel.Logic.GUIController.BackToMain() Message: Setting Welcome screen...
Info 2013-06-05 , 08:50:42 at Tvsukernel.FlowScreens.MainFrame.SetScreen(String screen, RoutedEventHandler[] eh) Message: Loading Welcome screen on Action pane.
Please help!
(Thanks in advance)

Ms updates does not work after recovery win 7 pro on dv4-2167sb

info on problems with MS updates right after a new install of win 7 pro: does not install updates and will not install SP1 from down load . I used recovery disks I made. The OS [win 7 pro] recovered great but MS updates did not work from the get-go.. {Personal Information Removed} HP NEEDS TO GET ME OS RECOVERY THAT WORKER I HAVE 4 OF THIS DV4-2167SB 'S
Been on the phone with hp [not US] for more than hr. talked to two svr. hungup on 3 times, HP needs some New VP's.

Hi VP_IA_DOT,
I saw your post and forwarded it to the right people for their review. You should hear back from someone shortly via private message on this Forum.
Thanks,
NicNac - HP Support Forums Moderator
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

How can I downgrade an operating system our bluetooth worked ok on the 4.2.1 system but now we are on the latest system it does not work properly so how can we get the old system back

how can I downgrade my operating system as my bluetooth work ok with my holde commodore on the 4.2.1 system but now it is upgraded to the latest system it does not operate properley

thankyou but it looks like we won't be buying another iphone

SQL UPDATE does not work

Hey Guys,
I have an update sql query which does not work with PreparedStatement object. Heres the code snippet:
PreparedStatement pstmt;
int numUpd;
pstmt = con.prepareStatement(
"UPDATE item_articles SET dataFile=? WHERE itemID=?");
con.setAutoCommit(false);
pstmt.setBinaryStream(1,fis,(int)file.length());
pstmt.setInt(2,item.id);
numUpd = pstmt.executeUpdate();
con.commit();
What I am doing here is that setBinaryStream(...) will upload a file into the DB. The query executes, theres no exception thrown, but my table shows empty field for the file. Note, there are no exceptions thrown from this query.
If I do the same thing for an INSERT statement, it works. The file gets into the DB. So , the file is there on disk, and theres no problem with it. Just that it does not work with UPDATE.....any clues ???
thanks
Askar

I think UPDATE commands dont work well with blobs.
I use to select the register with a ResultSet, then get a BLOB Object from the column.
So you can use a OutputStream to Upload your data.

Persian(فارسی)Keyboard on new update does not work (10.3.2)

persian keyboard does not work in 10.3.2 os unfortunately,does not some of the original persian letters like پ چ گ ژ

Thank u very very very very much, i just paused the antivirus and the updated installed the new software 4.3.3 on my iphone 3gs. thank u very much again from my heart. i was trying again and again from 2 days and always i was wasting 421mb of my data.....but at last its done thanks
Priyesh

Windows Update does not work, Windows Standalone Update Installer stops with error 0xc8000247 (Windows 7 Home Premium on Acer Aspire 1810TZ notebook)

I purchased a new notebook with Windows 7 in October. During the first weeks I uninstalled McAfee and replaced the harddrive. Since November Windows Update fails with error messages and defender does not start anymore. I made several virus scans (complete) with multiple antivirus programs but nothing showed up.
Since it took my days to install various software, I do not want to re-install W7. I also have no good backup that I could restore.
I am really surprised that there is not even a single entry regarding the error code in the Microsoft Knowledge base or elsewhere.
I really would appreciate help.

I hit this same problem... I spent days trying to figure out what went wrong. MS advise of doing; Windows7 re-installs, BIOS/firmware updates, drivers changed, etc etc etc.
I installed a new(large) SEAGATE Momentus XT hybrid 750GB SATA drive upon newly purchased notebook, but the twist here is between the storage configuration mode in the BIOS, ATA vs. AHCI. See, the DELL BIOS required to configure my laptop storage for AHCI
mode, because I had the 4GB Intel Flash Cache Module (Turbo Memory) installed on the DELL Precision notebook. The Flash Cache is installed internally in the mini-pcie slot, loaded the Intel storage drivers, and when it works, is an outstanding feature which
supports:
Windows ReadyDrive*
Windows ReadyBoost*
Looking at the details of the Intel storage drivers that support the INTEL TURBO MEMORY, they're from 2009. Of course it was recommended by users to install these drivers first before anything else, so it would function best, but this was part of the
cause to all the problems with Windows 7. I've provided links to Intel Flash Cache info for those interested. Unfortunately, loading the HP/Intel Storage drivers fixes the Windows permissions/update problems, but "Breaks" the Intel Turbo Flash Cache
functionality now, even though Microsoft still supports ReadyDrive in Windows 7.
"Intel® Turbo Memory is a primary PC component, along with the CPU, chipset, and system memory. It caches large amounts of frequently used data or user selected applications for faster access by the processor. This decreases the need for hard-disk accesses,
saving both time and power, which equates to increased performance and energy efficiency. That's good news for users who run data-intensive software like media applications. It's also a good match to the substantial system requirements to load and run Windows
Vista*.
Intel Turbo Memory is a single solution that accelerates data transfer both to and from the processor."
Intel discontinued support for the modules or drivers with the marketing move to producing their own SSD storage drives.
WIKI: http://en.wikipedia.org/wiki/Intel_Turbo_Memory
INTEL page: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396715.htm
Intel Drivers/Support Turbo Memory: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396719.htm
For me, I hit all the symptoms everyone else hit and thanks to humphrey for his find. I just wish Microsoft/Intel would get together and fix this Windows 7 issue between SW/HW; Large Drive Sizes, Licensing/Permissions, Flash Memory, ATA vs. ACHI, BIOS, etc.
There's been an incredible amount of loss productivity, resources, and costs incurred on this one ISSUE by everyone involved.
Intel Member login for Mobility Turbo Memory Flash Cache pdf: http://www.intel.com/cd/channel/reseller/asmo-na/eng/products/mobile/mprod/turbo_memory/394947.htm

ITunes Software Update Does Not Work

In iTunes v 10.5.3.3 I click on Help, Check For Updates. iTunes responds with "A new version of iTunes (10.6) is available. Would you like to download it now?". I click on "Download iTunes".
The "Apple Software Update" Dialog Box appears but iTunes does not appear on the list. The only thing that appears on the list is "DVD or CD Sharing Setup Update." The only way for me to update iTunes is to manually download the iTunes application.
I have uninstalled and reinstalled iTunes. I get the same result. Is the problem the iTunes application or the Apple Software Update application? I am running Windows XP Professional.

I repaired Apple Software Update. It is now reporting that I need a "Boot Camp Update". I do not use Boot Camp or have it installed on my system.
Doublechecking ... is your XP running natively on your computer, or is it a virtual installation on a system running Mac OS or Linux, or some other OS?
(Your ASU is behaving like your XP is installed on a BootCamp partition on a Mac system ... but if you aren't running BootCamp, it might be being confused by a virtual XP installation.)

Lenovo System Update 5 does not work on my B580

Similar Messages

Maybe you are looking for