Mass reversal of work order confirmations
Hi all,
Can we do a mass reversal of work order confirmations which we do through IW41 transaction,instead of reversing the confirmations one by one, if so please explain how.
Thanks & Regards,
Jegashree
Dear,
There is no mass confirmation cancellation Txn available in standard SAP.
Use
BAPI_ALM_CONF_CANCEL Cancel confirmation for maintenance/service order
Hope it will help you.
Regards,
R.Brahmankar
Similar Messages
-
Get Lastest date of the Work Order confirmation
Hi experts,
I want to write a report to get the lastest date of Work Order confirmation.Pls give me some logic solution. How to do?
I know the work order can be cofirmed partly,So there are maybe several date for work order confirmation,I only want get the latest one.
Edited by: Bean Dou on Jan 5, 2009 8:24 AMSORT BY DATE FIELD
DATA:CNT TYPE SY-TABIX VALUE 0.
SORT ITAB BY ERDAT. --->SUPPOSE THIS IS THE DATE FIELD
LOOP AT ITAB.
CNT = CNT + 1.
ENDLOOP.
READ ITAB INDEX CNT.
****NOW YOU CAN GET THE LATEST DATE ROW******
ITAB-ERDAT. -
BDC for mass-upload on production order confirmation
Hi ALL
Is there any standard Program for the mass-upload on production order confirmation for labor and machine hours.
the T-code to do this is Co12.
thanks in advance !hi,
You can use standard SAP program RCCLBI03 to do mass upload
see these link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8046aa90-0201-0010-5e99-962948c83331
thanks
karthik -
Work Order Confirmation -Zero Hours is allowed !
Dear Experts,
Can any one update, why work order confirmation is allowing Zero hours in IW41 transaction. Is there any significance for booking zero confirmation hours as SAP standard is allowing.
We need to restrict the same, is there any way to restrict without ABAP Team help.
Regards,
SahuReasons for allowing '0' hours can be like if some does not want to account for a particular job. Possible some technical constraints were there while developing. As far as How to restrict is concerned, I do not see options other than using user-exit CONFPM05. This is because even if you set this field mandatory (Actual Work AFRUD-ISMNW_2) in Tcode OIZN, it does not prevent confirmation with Zero value. You can also try by setting this fields as Req. in this SPRO tcode.
KJogeswaraRao -
Reg:Bapi for mass creation of production order/confirmation
Dear Experts,
I wanted to know with the following BAPI is it possible to create Multiple production orders for different semifinshed Materials along with material availability check and other functions similar to CO01 transaction.
I knew there are standard transactions for mass confirmation for production orders. But i need a confirmation on this BAPI . As i am planning to go-ahed with ,mass creation of production order creation / Order confirmation in single custom transaction.Need back flush activity even supported.
BAPI_PRODORD_CREATE to create the orders.
BAPI_PRODORD_RELEASE to release the orders.
BAPI_PRODORDCONF_GET_TT_PROP to get the default data for the confirmation.
BAPI_PRODORDCONF_CREATE_TT to ost the confirmation of production order.
Along with this BAPI do i need to commit any other BAPI to carry out back flush for components.
Need your suggestions to take it further.
Regards,
Daya.Dear SAP Daya
If the issue has been solved, please close this thread.
You have already mentioned that the issue has been resolved, thefore, you should not ask for help on another thread before closing this one, as it looks like you are trying to force people to answer your threads.
Users are always trying to answer as many threads as possible on good will we don't need this kind of "incentive".
Please read carefully the The SCN Rules of Engagement, especially point 8:
Be responsive. If an SCN member has answered your question, please mark the answer as "helpful” or “correct”. Mark the discussion as “answered,” so that other members can find the answers more easily
Also, I checked your old threads and I could observe that there is only one closed. Please review your old threads and close those already solved.
BR
Caetano -
Updating PO confirmation and ASN through Work Order Confirmation
Hi,
We implemented PO collaboration and Supplier is doing PO Delivery confirmation and ASN.Now we are implementing Work Order Collaboration and system created Work Order with reference to Purchase order.
I want to know whether PO confirmation and ASN date gets copied from Work order dates(after doing confrimation for phase Transport).
I want to know what setting we need to do as presently it is not getting copied to Work order. And I want to know how it updates ECC confirmation tab for Purchase Order.
Please do the needful
Regards
Raghavendra PaiHi Raghavendra
The above validation check will prevent supplier confirming purchase order request lines in PO details screen, so only supplier can confirm through WO confirmations, i.e by accepting the work order request lines in delivery overview, adapt the work order
This will make the work status as CIAG from CINE, in negotiation to in agreement
Then you can publish the work order, this will copy the confirmed data from the work order as identical request data and confirmation data to the purchase order. this data will be picked by ROC_Out and updates the po data in backend
Please check whether ROC_out is available in customizing
SPRO-SNC-BASIC SETTINGS-PROCESSING INBOUND & OUTBOUND-PROCESS TYPES OUTBOUND MESSAGES
ASSIGN OUTBOUND MESSAGES TO DEFAULT PROCESS TYPES
REPLORDC_O ASSIGNED TO ICH SUPPLIER COLLABORATION
Still if does not trigger, kindlly check the log slg1
it could be problem with ODM's ,POS etc
Best Regards
vinod -
Reversal of Production Order Confirmation through IDOCS
Hello all,
The time for each operation in a production order is logged in KabaBEnzing tool called Autotime. This is sent to SAP through IDOCS and the order confirmation is created. There is a scenario where the supervisor could have entered the wrong time against an operation. Is it possible to reverse the confirmation through IDOCs. If yes, please let me know what should be the approach? Also, I heard that SAP does not accept negative time to do the reversal. How true is this?
All helpful answers will be rewarded.
Thanks,
KalyanHello,
I saw your message and we are doing the same thing. Did you find any answers to your questions. We are using Kaba for our shop system and now we would like to sent negative numbers back to sap because of supervisor adjustments. I have not found any way to set Sap to allow it. What conclusions have you came up with the situation.
Thanks again,
Jeff -
Work order confirmation after TECO
Hi Friends,
I have been facing a trickey situation where even Work order got TECO and i am triying to confirm the Operation (IW41) its allowing me to enter actual hours.however in work order those hours getting updated as actual Hrs aganist operation.
How its possible,in fact i should get error message.
can you please suggest.
Regards,
SrinikaIt is standard behaviour. There are ways to restrict. See these 2 posts
User-Exit way
Stop Confirming TECOed PM Order: User-Exit Way
Status Profile way
PM Order - System Status and User Status Update
KJogeswaraRao -
Mass Printing of Works Orders and Related Documentation
Hi everyone,
I have a very peculiar problem, and any pointers in the right direction will be appreciated.
If this is not the right forum, please point me into the right direction.
The problem that I have is this:
I print multiple Works Orders (Plant Maintenance) at a time.
Linked to these work orders are Equipments etc. and linked to the Equipments, SAP DMS documents. When priting the Work Orders, the sequence of the related information (e.g. documents) are random, i.e. a user will need to sort the prints to match the Work Order with it's relevant documents.
Essentially, what I need is: print #1 W/O with attached docs, then print #2 W/O with attached docs, then print #3 W/O with attached docs
Any ideas at what I need to look at?
You can imagine if I print 400 works orders and all the documents related to it and it in not collated.
Thanks.Can you let me know what transaction / process which you are using to print work orders, In case if you are using any transaction then we will check for user exits / badis so that we may enhance the standard functionality.
One more suggestion is you can post in the forum: [click here|SAP ERP - Logistics Materials Management (SAP MM);
Thanks
Satyasuresh -
Reg: Reversal of PM order confirmation
Hi All,
Kindly let me know how to do the reversal of confirmation which we did in IW41??Dear Sir
Please user IW45 Transaction coded for cancellation of Confirmation of PM order.
Regards -
Mass cancellation of production order confirmation
Hi All,
Wrong confirmation is posted with no cost control key. But the operation is relevant to cost.
Now we have to cancel all the wrong confirmations & re-confirm with a correct control key. Is there any way to cancel confirmations in mass??
Pls reply...Dear Srijit,
There is No Std T-code for Mass Cancellation of Confirmation
Either go with LSMW or BDC
Regards
Madhu -
Default Profile Settings for Work Order Confirmations (IW42) Screen
For the IW42 Screen, I have a requirement to ensure that all users see one profile only. Currently, we have to set it manually for each user. Is there a way to mass update many users so that they can see the one specific screen that can be set in the background?
Delete all other Profiles from the IMG
Then they can only select one...
Otherwise, write a program to update table TPMUS-PROFIL
PeteA -
Restrict work order confirmation without activity price in KP26.
HI Guys,
we are maintaining the activity price in KP26 for mandays activity and confirming it in IW41. Now if activity price is not maintained in KP26, and confirming the mandays in IW41, system should through an error message. please let me know how can i do this.
Anil Kumar. VHi
you can check the SPRO in Define Control Parameters for Completion Confirmations where you can mark the Actual cost , and Termination for incorrect act cost. where in it will through an error which confirming the same.
If the above conditions don't met your requirement you can check the same using user exit
Regards
Thyagarajan -
SAP Printers and Mass Printing of SAP Work Orders
Good day Experts,
We have a printer related issue especially mass printing of Work Orders. We have discovered that printing a list
of work orders takes longer with intervals of 10min up to an hour, as compared to printing smaller list(1-5 etc)
We are not certain whether this problem originates from the Network or SAP. The problem is not one of uniform nature,
changes frequently, Sometimes better and sometimes worse.
Please advise me.
Thank you.
Regards,
Sibusisohi,
There could be many reason behind this
1. Logic put to fetch data without key fields
2. unwanted code
3. Using System status search
4. getting data from User status tables such as JCDS
just check by giving print with one order, even if it results in performance issues, then it requires Fine tuning
you have to check with developer to removed unwanted code
regards,
santosh -
Document number-PM order confirmation by IW41
Hi,
For PM work order confirmations, I want to fetch the document number. In which table can I find the document number stored? I found it in AFRU-CATSBELNR, but only for CATS confirmation. For confirmation of work order through IW41 transaction, is there any table where I get the document number?
Thanks and Regards,
JegashreeHi Jane,
I am getting the confirmation number.but not able to fetch the document number (I need this document number to fetch the cost per line item/confirmation from COEP table) Does the PM order confirmation through IW41 transaction have any document number?
Thanks
Maybe you are looking for
-
How can I set up anApple ID for my 9 years old. Every time I try it tells me he is bolew the min age. If this is the case how can he download free games and how can he redeem his birthday $30 iTunes card? I dont want him to use my ID as it has my cre
-
Ipod touch not seen in sauce menu of itunes
Ipod touch not seen in sauce menu of itunes, I have turned off & on the Ipod and re-downloaded a fresh ITunes software & used a different usb port & restarted the pc but still it is not seeing the IPod Touch. I also got this message when downloading
-
Installing an HP Laserjet 4050 printer on Windows 7
I have an old HP4050 laserjet which has had light use and thus has plenty of life left in it. Until recently it was connected to a Windows XP PC's parallel port. It was also used over a network by Windows 7 PCs using the HP PCL5 universal driver.
-
Stuck while installation of oracle in linux
Hi guru's i am stuck with a problem while installation of oracle in linux please help me i am getting following error [root@localhost etc]# groupadd oinstall groupadd: group oinstall exists [root@localhost etc]# useradd -m -g oinstall-G dba-d/home/
-
Greetings, I am trying to troubleshoot an HP Mini 110-1000 (actually a refurbished HP Mini 110-1033 CL PC). When the machine boots, it attempts to connect to the network and the process hangs. I booted into BIOS to attempt changing the boot sequence