PS Implementation without COPA

Hi Gurus,
Can anybody clarify following queries.....
1. Can we implement PS Module without COPA Module.
2. If so, what will be the settlement object in settlement rule. (WBS Settlement)
Note: We are implementing PS module for Customer Projects and COPA is not in our implementation scope.
Regards,
Ganesh Ck

It is ideal to have PS module along with COPA. However we can implement just the PS module. The only small issue that we would have is settlement of revenues. We need to settle revenue only to revenue GL accounts You have is create appropraite allocation structure:
1. Create allocation structure
2. Create 2 assignments "Rev" and "COST"
3. For source assign all cost related accounts to "COST" and revenue related accounts to "REV"
4. For settlement, the receiver category can be cost center/wbs element for "COST". The receiver category has to be GL accounts for "REV"

Similar Messages

  • Sales Order Costing WITHOUT COPA

    Hi Gurus/Experts,
    I have to work in a make-to-order scenario. But in this case, the COPA shall not be configured. Kindly let me know, if Sales Order Costing is possible without COPA. If it is possible, can you kindly guide me the configuration process?
    Thanks and Regards,
    Amit

    Hi
    Sale order costing is very much possilbe w/o COPA.. you will have to decide from where you would derive your profitability reports
    Normally, you settle SO to COPA and derive reports from there... In absence of COPA, decide where you would settle the sale order to, say, an internal order or so....
    For Config, you can search this forum or refer base line configuration docs in help.sap.com
    Ajay M

  • Without COPA customer project settlement

    Without COPA customer project settlement - where it should get settled ?
    MGK

    Should it?  Well, first you need to know why do you want to settle.  If you have RA to be posted for example.

  • Mexico Digital Invoice Implementation without XI.

    Hi All,
    We are in the process of generating Digital invoice for Mexico.
    Is it possible to generate the Digital invoice without the XI system? If possible then what are the hurdles and challenges in achieving this. I did go through the list of Notes mentioned by SAP to implement Digital Signatures for Mexico. But they dont seem to mention about implementing with out XI system.
    Also is there any standard process to generate the XML required for Mexico. Appreciate any clarification for the above queries..
    Thanks in advance.
    Regards,
    Navin.

    Hi Naveen,
    Is important to consider three points at the moment of implementin Digital Invoice Mexico:
    Enablement of ODN (official document numbering).
    Enable digital signature in SAP.
    Creation of XML.
    You can perform the first two options withount PI/XI but the only problem will be the generation of XML, that for fiscal purposes is the digital invoice. If you are not using PI/XI you can do that by ABAP, Webmethods or any tool that generates XML.
    If you decide to generate the XML with ABAP, you dont need to use IDOC but is still needed to create an output message that generates the XML instead a smartform or other. This can be sent automatically to customers or to any kind of repository to keep the files for fiscal term.
    The structure of the XML must follows all Mexican requirements acording to Anexo 20 that you can find only in spanish.
    I suggest you to read the attachments on the following note, where you can find the structure and requirements and order of each XML field:
    1318342 - Digital Invoice Mexico IDoc basic type INVOIC02 Extension
    Regarding the standard process to generate XML in SAP, the only information provided by SAP is for PI/XI, so your ABAP team needs to take a look for anexo 20 structure:
    ftp://ftp2.sat.gob.mx/asistencia_servicio_ftp/publicaciones/cfd/Anexo20RMF2010.pdf
    I hope this may help you.
    Regards,
    RP

  • Product wise profitability without COPA

    Dear Friends
    I have a problem with my client.
    We are implementing SAP R/3 Ecc 6.0 version.  Our client is having only one manufacturing plant, he is making 8 different products in the same plant.  There they use common materials and common utilities for 8 products.  When we prepare the Org.Structure, we have proposed single Plant and single profit center.  Initially he asked us to maintain 8 different plants for each product, some how we could able to convinced him that it is not possible.  Since, he wanted to see product wise profitability, he is insisting us to maintain 8 different profit centres or segments.  We said it is also not possible, since he has a common expenses and materials, we have suggested to go for COPA or Z report.  He does not want to take  COPA or Z report for the same. 
    In such scenario, how can we address his requirement.  Experts please throw light at the earliest possible.
    Regards
    Prabhakar

    Hi,
    With 8 Products as Cost Centers and Profit Centers, you may have to define the GL A/cs accordingly to capture the costs & revenues. Purchase, Inventory, Consumption, Inventory Change, GR/IR Clg/,
    Cost of Goods Sold, Sales etc.  You can create Customer Group also Product wise. Make OBYC settings accordingly and define OB40 relatively. Valuation area for SFG & Finished goods will have to different so that it captures the relative accounts assignments according to Products. For each BOM & Routing will be well defined for each product to be manufactured.  You will have to define the relative
    Work Centers and their activities linked to product wise cost centers with necessary costing sheet and
    cost component structure and allocation structure. Create Cost center and Profit Center Heirarchy profit wise.
    Regards,
    Sadashivan

  • Parking of A/C doc with & without-copa fields and posting of accrual doc

    Hi,
    We have a requirement to park the accounting document with & without the copa fields and to post the accrual document.
    For with-out copa fields parking we have already tried using the FM AC_DOCUMENT_GENERATE, followed by FM PRELIMINARY_POSTING_DOC_WRITE , but i can view only the header data in the display in the transaction fbv3 and not the item data. But the item datas are available in the table vbsegs,vbsegd and vbsegk.
    Can any suggest what could be the problem and if any one has faced the similar problem please reply me immediately.
    For the with-copa field parking we have the copa fields in the FM AC_DOCUMENT_GENERATE, but not in FM PRELIMINARY_POSTING_DOC_WRITE. Can any suggest how this can be resolved.
    I have not got any clue of how to post the accrual document.
    Any pointers on these are most welcome asap.
    Thanks in advance.
    Regards
    Shobana.

    Hi Shobana
    I have the same requirement to park a document, im getting an error in generating the document
    Can you confirm the fields to be populated?

  • Crystal implementation without BOBJ

    Hi,
    What are the possibilities of implementing Crystal Reports without going for a full blown BOBJ project?
    What are pre-requisites for clients who have
    1. ) just ECC -
    2) ECC and BI
    Do thet need the BOE installation for utilizing basic Crystal capabilities?
    Thanks,
    Raj

    If you do not have a BOE server installaiton then you cannot let your users access the reports over the network using only their internet browser. Every user has to have a CR Designer installation in order to be able to refresh the reports. Additionally without a BOE server the parameter picklists are not really dynamic when you access SAP BW over a BEx query.
    A BOE server provides also additional functionalities like object-related security, scheduling, report bursting etc.
    Regards,
    Stratos

  • ESS implementation without using EP

    Hi,
    I want to implement ESS without using EP. Please give me the various ways to implement this. & suggest the most feasible solution. or any links related to this.
    Regards,
    Seema

    Hi Seema,
    <b> Welcome to SDN family </b>
    Evn if u use EP , ESS runs on the ITS Only .
    There are Service files ( Internet Application Compenents ) called as IAC's .
    Go to sm30 - > t77www_srv iview to see the transactions.
    Hope it helps .
    Rgds,
    J
    If ur problem solved ,Award pts and close the thread.

  • E-rec 600 EHP4 implementation without EP

    Dear All,
    I would like to know the feasibility of implementing e-rec 600 ehp4 without EP. I understand from one of the sap notes that, EP is a prerequisite.
    If it possible, please share the approach on high level.
    Regards,
    Rao

    Hello Rao,
    With out EP also you can implement E-rec SP04. However you will loose from MSS related fucntionality. You can embed the e-rec links in to share point and provide signle sign on access to recruiters and manager. Please see below link for more details. Let me know if you have any questions.
    www.microsoft.com/isv/sap/technology/interop/sharepoint.aspx
    Thanks,
    Raghu.

  • FFT implementation without using inbuilt FFT function provided with labview

    Hi,
    I am very new to labview ,I have to implement FFT on NI Node WSN-3202.No fft inbuilt function on WSN target is there to do so.Please anyone give me some idea to implement FFT without using fft function in labview.
    Thanks

    Hi rita,
    when all you need is "some idea" I would suggest to read the Wikipedia article on FFT...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • DMS Implementation without SAP GUI

    Hello All,
    I want to implement DMS (data manaagement system) in my project but without using SAP GUI.
    Could you please suggest which method to be used for the same.
    Thanks in advance.

    Hello All,
    I want to implement DMS (data manaagement system) in my project but without using SAP GUI.
    Could you please suggest which method to be used for the same.
    Thanks in advance.

  • RF-Implement without Warehouse  Configuration.

    Hi Friends,
    We are planning to implement RF at client location . They donu2019t have warehouse right now. They haev very simple procurement ; from PO u2013 GR at storage level only.
    Please let me know "Can we Implement RF without having the Warehouse if yes what challenges will come up?
    Or have to go with lean warehouse for passing values in LM01 screens.. as Warehouse looks Mandatory ."
    Does we require XI/ PI interface for RF implementation ?
    Regards,
    Lalit
    Edited by: lalit sharma on Sep 3, 2010 8:17 AM

    Hi,
    Your requirement was for RF transactions wihtout warehouse implemenation
    So dummy warehouse is just a warehouse number without anything in it - storage type, sections or bins
    1. For dummy warehouse, Bins are requried ? if yes thn material master has to be extended. - when there is no WM implemenation, BINs are not required and hence material need not be extended.
    2. If you have dummy warehouse , GR cant be posted untill warehouse mgt ( material)  - GR done till IM Location only
    because you may or may not assign dummy warehouse to a dummy storage location which is not used for any inventory purpose
    3. Dummy warehouse is something like Lean WM?  - Dummy Whse is just a code used for RF purpose
    4. If need to take Lt31 printout , will have problem if warehouse activated? - Without WM implemenation LT31 is not possible.
    dummy warehouse to a dummy stor location does not impact anything as far as dummy location is not used
    howere assignment is not mandatory
    Regds

  • Solved: ADF BC and primary keys - how to implement without using triggers

    Using the following OBE as an example:
    http://www.oracle.com/technology/obe/obe9051jdev/ADFWorkshop/BuildingADFApplicationsWorkshop.htm
    There is just one view that has CustomerId defined as a primary key, where the value for the primary key comes from the customer_seq sequence.
    How do you create the model using ADF BC entity to create an entity object that has a primary key that needs to be populated by a sequence table when inserted WITHOUT using a trigger?
    Basically I want to just use ADF BC instead of toplink in the OBE. We do not use triggers to insert primary keys, so this example is a good match for what I need.
    Can someone help me out. How do I adjust the model to use just ADF BC - how do I define the entity object to use a sequence. Do I just override the create method in the impl? Is it that simple? Or is there a way to do this point and click in the entity tool.
    Thanks!

    I'm not the dba (or one of several) - so don't shoot the messenger... the dba's do not like to use triggers in the code. I have been told that this has caused too many problems in application development.
    I don't ask why, just deal with the fallout.
    I did try using the following code in a create method:
    protected void create(AttributeList attributeList)
    super.create(attributeList);
    SequenceImpl s = new SequenceImpl("customers_seq", getDBTransaction());
    // this.setCustId(s.getSequenceNumber());
    this.createPrimaryKey(s.getSequenceNumber());
    When I run the test program for the module, I get a new entry with the id empty and greyed out. I was hoping that this would be filled in on the actual insert, but no joy. As soon as I try to commit, I get an error:
    (oracle.jbo.AttrValException) JBO-27014: Attribute CustId in CustomersWSView is required)
    So what needs to be done?
    Message was edited by:
    klee

  • Settlement of customer project--without COPA

    Hi guru's,
    We do not have COPA in place here...so how to settle our project.
    please provide me any revlevant doc regarding settlement from the config as well as execution of settlement point of view.
    I need to sit with my CO consultant.
    My counter part CO Consultant has not worked with PS integration so he is not having idea about the settlement for projects....i need to make him understand.
    Please help me.

    Recommendations in Customer Projects
    In customer projects, the actual costs are settled, but accrued amounts (such as costs of sales or inventory from which revenue can be generated) are not. You carry out this settlement at billing element level.
    For customer projects which you settle in full to Profitability Analysis, it is a good idea to generate the settlement rule using a strategy defined in the IMG. The standard system we deliver includes a strategy for automatically generated settlement rules for customer projects.
    The system uses this strategy to generate the following:
    u2022     For all billing elements:
    o     Results analysis key
    o     Settlement to profitability segment
    o     A settlement profile providing for settlement in full
    u2022     For all other WBS elements
    o     No results analysis key
    o     A settlement profile providing for no settlement
    If account assignment elements within a billing structure do not contribute to the cost of sales, you can change the settlement rule manually.
    If you maintain the settlement rule manually, we recommend you proceed as follows:
    u2022     Use a project profile with a settlement profile that forbids settlement. This initially prevents settlement for all the WBS elements in the project.
    u2022     Change the settlement profile in the billing elements manually. Define a settlement profile that permits settlement.
    u2022     If you want to settle account assignment elements (in whole or in part), you must change the settlement profile for account assignment elements manually.
    You change the settlement profile in the settlement rule for the object by choosing Goto  Settlement parameters. There is a parameter in the settlement profile which you can use to define whether settlement is forbidden, allowed, or required.
    Avoid making settlements within the project hierarchy. These can adversely affect system performance.
    For more information on settling customer projects, refer to  Settlement in Product Cost Controlling .
    Regards,
    ANSAR

  • 3PL implementation without Decentralized WMS

    We are working towards outsourcing the warehouse for one division of our products. We cannot do the decentralized WMS as the 3PL doesn't want to have the terminal.
    This is the EDI flow I am working on.
    1. O/B 846 (Inventory Snapshot)
    2. O/B 940 (Warehouse Order)
    3. I/B 945 (Warehouse Shipment Receipt)
    4. O/B 943 (Warehouse Stock Transfer Shipment)
    5. I/B 944 (Warehouse Stock Transfer Receipt Advice)
    1. I have no cluse about it. I know there is one message type in CRM to do this. But we don't have CRM. Any idea how to generate this one ?
    2. For 940, I am planning to do WHSORD with DELV/DELVRY03 at the time of pick ticket creation.
    3. For 945, I'll do SDPICK to pick and pack the delivery and then do the Goods Issue.
    4. Will it be generated once the PO is released ??
    5. Should it trigger aMIGO for Goods Recipt?
    Thanks,

    SAP integrates RF Devices, using SAP Console. Once the integration is setup, you can configure many of the warehouse activities to be executed on RF Devices. SAP provides a detailed configuration tasks to link the same GUI transactions to be executed thru RF Devices.
    If you need more information on configuring the RF transactions, Please let me know the WM Business process so that configuration tasks can be guided.

Maybe you are looking for