SAP Transactions available in Web GUI

Folks-
Need some help. Our client is implementing SAP where the user community will only have access to the webgui. Is there some sort of list, or other means, to determine the delta between what transactions are offered in the regular SAP GUI vs what is available in the web gui?
I imagine this list would be very small, but it is crucial for us to be aware of what we will not have have access to in the web gui.
Thanks

Hi,
Tcodes depends on the role and profile allocated to the user.
Tcodes which you have the access to SAP GUI will be same as for WEBGUI.
As a part of Basis Person I have the basis roles for SAP GUI
The same tcodes which I can access from SAP GUI is same I can access from WEBGUI.
Regards
Sreedhar Reddy

Similar Messages

How can create report to get the all SAP transactions available to CSRs

Hi,
The user like to have the format of report as follows:
SAP transactions      Transaction desription     CSR 1     CSR 2     CSR 3      u2026etc.
VA01                                     order entry      Yes     No     No
VA02                                     order change     Yes     No     No
VA03                                     order display     Yes     Yes     No
u2026etc.
( Of course the above entries donu2019t make any sense as u2013 Itu2019s just an example )
1) I think CSR means Customer Service Representative, where it is residing means in which table ?or How can I get CSR1,CSR2.....?
2)How can I get the all SAP transactions available to CSRs ?(first column)
3)How to find the which transaction is available to CSRs ? so that I can mark it is as Yes else NO

I am not able to show the correct format as all get mixed when I post thread:
SAP transactions Transaction desription CSR 1 CSR 2 CSR 3 u2026etc.
VA01                                  order entry     Yes    No           No
VA02                                  order change Yes    No         No
VA03                                  order display Yes    Yes        No
u2026etc.
( Of course the above entries donu2019t make any sense as u2013 Itu2019s just an example )
First column is Sap transactins,
second column is Transaction description
third column is CSR1,
fourth column is CSR2,
and soon.
In the first column I need to display list of all sap transactions available to CSR,
In the second column I need to display the transaction description
from third onwords I need to display CSR1
in fourth CSR2 and soon .
Please let me know for any questions,I appreciate for the reply .

SAP Transaction iVew für GUI-Area Menu

Hi gurus,
I have the request to create an iview that starts the sap gui and opens an area menu.
I have tried to use the SAP transaction iview to do that, but the gui can't open the area menu and shows an error (Transaction ZIPORTAL unknown). as soon as i manually write transaction SMEN into the ok-code field the area menu gets started.
any ideas????
Best regards, Alex

Hello,
I have given the correct system object and transaction code. The problem is that technicaly spoken the area menu is not the same as a transaction code.
In the most SAP systems I know the first screen after loggin on to SAP GUI is equivalent to the transaction SMEN. In SMEN the ok-code field can be used to "start" area menu.
Unfortunately the portal doesn't open the transaction SMEN automatically but opens just the SAP Easy Access Start page (type "/n" in your ok-code field as soon as you start the SAP GUI and you will know what I am talking about).
From this starting point the area menu can not be started using the ok-code field because it just is not a transaction. The same behaviour occurs when the areamenue (ZIPORTAL) is started out of any other transaction by using /nZIPORTAL in the ok-code field.
My approach would be to realise an iview that first starts transactio SMEN and then starts ZIPORTA, but I don't know how to do that using parameters or something simmilar....
maybe somebody has an idea how to do that or a different approach?!?!?
thanks & regards, Alex

Colors not displaying in WEB GUI

Hi,
In WEB GUI, I am unable to see the colors in my ALV Grid when the fields are in editable mode where as in SAP GUI am able to. There is no problem when the fields are in non-editable mode.
Can you help me out to view the colors in my ALV Grid for the editable fields in WEB GUI?
Thanks,
Adithya M.

You might be out of luck, because usually there are no specific settings for the WEB GUI. And one of the problems with WEB GUI is that it doesn't support all the functionality which is offered in your standard GUI. So it is possible that this is exactly one of the scenarios WEB GUI doesn't support. That is also the reason why not all SAP transaction work in WEB GUI. We had issues with parts of TEM transactions not working via WEB GUI.
Michael

Calling sap transaction in web browser

Hi,
I want to call a sap transaction in web browser.
In my case the Solution Manger Transaction SMSY
to provide all the System Landscape Information.
How can I realise it with less effort?
What technology is state of the art for this problem?
Thx 4 answer!
Best Regards,
Rene Trippolt.

Hi Jörg,
thx 4 ur answer but is ITS the only way for solving this problem? Is it still state of the art?
What about Portal -> Application Integration with iView,
WebDynpro, etc. Is it also possible with this technology to call a sap transaction in a web browser with less effort?
I have to do a kind of evaluation for the best integration
of an sap transaction in a web browser.
Independent of any SAP Release!
thx 4 each hint,
Rene.

SAP transaction iview of GUI for html never works

Hi All,
We are implementing ESS/MSS on EP 7.0, ECC 6.0, ESS/MSS 600 landscapes for India Country grouping.
There are few SAP transaction iviews of type GUI for html and we tied up those to ESS Overview homepage framworks.
However, each of these transaction iviews throws the same error messages as below :
Error when processing your request
What has happened?
The URL http://hostname.domain:8001/sap/public/bc/its/mimes/system/sl/page/menubase.html was not called due to an error.
The following error text was processed in the system TD1 : This function is not possible
The error occurred on the application server TCSCQ1_TD1_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_ITS===============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP.
I have activated all of the ITS services from sicf transaction. Published all of the services (global, webdui, webdui_start, system, shuffler) to internal.
I also executed the Webgui service from sicf tcode. But, still the same error message persists. Am I missed any settings for Integrated ITS ?
When I enabled option (Display a notification about every script error) from IE options, the system keeps on giving the mesage 'window.wgu.global.eventhandler' is null or not an object, wgu.ObjEventHandler' is undefined etc.,
I have noticed that none of the ITS services never work.
I would appreciate if anyone can shade some light regarding this issue. Any guidance or inputs in this context would be of greatfully help.
Regards,
Anil Kumar.

Please don't cross post messages....

Service to call a SAP Transaction from cProjects

Hi,
After accounting Integartion, I wanted to call some transaction already in "Service for an SAP Transaction" node.
There I need to define the Parameters and Services to make it available thru Portal.
But seems I'm not able to provide the exact Parameters for the service.
Also, When I enter the Parameters for the WEB server of an SAP Transaction, for Alias WEB Server, its throwing an error to check entry in OLR3_URL_SRV.
Many Thanks,
Jyoti Shankar

Hi Vivek,
I've checked the URL. The SAP Transactions can be called online thru SICF WEBGUI Test. But from Portal, when I'm doing the same, the URL gets changed and system generates the string "scripts/wgate/webgui/!?" in the start URL.
The reason stated is Web Server Address does not contain the Service "WEBGUI".
How can I resolve the same ? Please advise.
Thanks,
Jyoti

Creation of "Web Dynpro for Java" for SAP transaction

Hi All,
In EP when we create SAP transaction iView for SAP transaction,
a)ITS server is required if we choose SAP GUI Type as WebGui(Performance wise as well as some other issues)
b)SAP GUI has to be installed if we choose SAP GUI Type as WinGui.(User has to install SAP GUI).
Can we overcome these two issues by creating Web Dynpro application for SAP transaction in quicker way. Any suggestions are appreciated.
Thanks and Regards,
Gangadharayya.

Hi,
It is not possible to display a transaction directly in a java web dynpro. If you do not want to use a transaction iview the only other possibility is to create a web dynpro that uses BAPI's as models.
Regards,
Christophe

Customize Local Layout in SAP R/3 Web GUI?

We are using IC WebClient with a link to R/3 4.6c for order entry. The users want to be able to have the same control in the R/3 Web GUI that they do in the native R/3 GUI (eg. automatic tabbing at end of field). In native R/3, this is controlled via the 'Customize Local Layout' icon on the toolbar, but this icon does not exist in the Web GUI. Does anyone know if this kind of control is available with the R/3 Web GUI?
Thanks for your consideration.
Kathleen McCullough

Per OSS - "Differently from SAPGUI, Web UI is built in a navigator envinronment (Internet Explorer, Mozilla, Safari...). Thus the requested functionality depends on the browser, not on any SAP setting.
To my knowledge, this feature is not available in Internet Explorer, butyou can always write a simple Java routine that does the job. I found an article that you can use to start your investigation. Please, check it here:
http://articles.techrepublic.com.com/5100-10878_11-6069857.html "

Monitoring of availability of SAP transactions

Hello!
We would like to monitor whether or not the end users can access to specific transactios (e.g. within FI, CO or MM area).
So when the users cannot access these transactions codes a automatic notification (e.g. mail, sms) should be generated.
We already implemented CCMSPING agent, but this approach does not fulfill our requirements.
SAP Solution Manager 7.1 implements several approaches for the availability of transactions.
Has some one experience with the monitoring of SAP transactions and which of the following methods can be recommended?
1) Entry in the table ALTRAMONI on the managed system/CCMS
2) Business Process Monitoring
3) End User Experience Monitoring
Any helpful information will be very appreciated!

Hello
1)Yes. You need to. Actually many solution mananger scenario start using the SMD agent.
    So you can consider installing the agent to your managed system is more or less "must to do activity for the solman itself".
     It is not only for the RCA function any more. Others like EEM, BPMon <analytics>, DVM Cockpit, others also require it.
     Because different applications use extractor framework.
2)EEM. First you need to record the script. GUI operation or browser based operation. (Both supported)
   Then upload the script and deploy it to the some mashine (PC) near to your frontend.
   Then the mashine execute script regulary (called robot).
   So in your local pc (where you execute the script) regulary), you also need to install agent to execute script regulary.
   Just normal PC is ok for htis purpose.
Last question. I am not sure... Hope other people can answer.
best regards
keiji

Invoking SAP transaction in native SAP GUI

Hi,
I need to invoke SAP transaction in native SAP UI and not web browser using a Java application or any executable application.
Can this be done?
Thanks,

Hello Vijaya,
I assume your question is whether SAP transactions can be run via a Web Browser without a JRE being installed - right?
The answer to this question is: That depends on the transaction.
You can use SAP GUI for HTML (a service of the SAP integrated ITS) to render many SAP transactions in the browser (for limitations have a look at note 314568). However if you do not want to use Java applets this means one additional limitation: You will not be able to download or upload files from the browser to the SAP system. Before doing anything like this I would strongly recommend to do thorough testing (and rethink why no JRE should be used).
BTW: Follow ups to this question should be better posted in the SAP ITS forum.
Best regards,
Frank

SAP Address Type on the SAP Web Gui - Assignment Blocks

Hello SAP Gurus
I am trying to configure system so that different Business Roles can only see different Address Type on the SAP Web Gui - is this possible ?
For instance Business Role - "X" can only see the Standard Address Type and Business Role "Y" can not see the Standard Address but see other ones on the assignment blocks
Thank you

Hi Raj,
You can achieve this by enhancing the Addresses and Address Types assignment block.
Based on the Address Type 'Standard Address' entry, filter out the corresponding address
in the Addresses AB. This determination can be performed in the enhancement views.
Once the view are created, create a new configuration with Role config key 'Y''.
Add the enhancement views to the Displayed Assignment block section. And remove
the standard assignment blocks from this section so that they will not be available in
the personalization so that this user cannot view the standard address.
Regards,
Leon

SAP Web Gui does not completely log off.

Hi Experts,
I am having trouble with our web gui, I can log in without a problem and when i try to log out there is message shows that i am logged off but when i refresh the page it automatically logs in. It would only go back to the log on page if i exit the whole browser window. i am using mozilla for my web gui. any help on this matter would be much appreciated.

Hi
Which version of Web browser ?
and also refer the SAP Notes
1777513 - WebGUI logoff does not work
1903478 - Session remains open after the logoff
BR
SS

Window size of web-enabled SAP transaction in an iView

I have a problem which maybe a bug concerning a web-enabled SAP transaction within a Portal iView. If the transaction is an ABAP report or a Dynpro program that requires a wide display area, the display is cut-off which requires to user to use the scroll bars. However, if manually entering the SAP transaction within the tCode input-field of the web-enabled transaction inside the iView, the window length changes and thereby the scroll bar disappears.
I would like to know how to set the inital width of the web-enabled iView so that there are no scroll bars when the iView opens an SAP transaction which requires a wide display area. I've tried both the Wizards for creating iViews for R/3 and SAP transactions without success.

Hi,
You have to set the iview property to FULL-PAGE and height to be some 8000 in the portal then the problem solves.
Regards,
Lakshmi.

Calling SAP transaction from Webi report?

Hi experts,
With BI/BW query, we can retrieve data from R/3 source system via report-to-report interface. For instance, from a Purchasing query with data aggregated by Vendor, the user can trigger the R/3 transaction ME2L by clicking on a row.
Is there a similar feature in BOBJ Webi report? For instance, can we use hyperlink or some other means to do this?
Any idea will be much appreciated.
Thanks and regards,
Linda

Hi Stratos,
Really appreciate your advice. Following your suggestion of using blank cell, the server is determined dynamically for the hyperlink.
However, there're still some issues with defining a hyperlink for table columns. For instance, I have 2 columns in the table - Cost Centre and Cost Element. SAP transactions KS03 and KA03 are to be launched respectively for these 2 columns. The value of the clicked column (Cost Centre, Cost Element) is to be passed to the SAP transaction.
I've created the following hyperlink for the Cost Centre column:
http://[[MyServer]]?sap-client=([Client])&sap-language=EN&~transaction=KS03
with Tool Tip = [[L01 Cost Center Key]]
The link is not working immediately, so I adjusted the formula as follows via the formula editor (by adding double quotes for <MyServer>):
="<a href=\""[[MyServer]]"?sap-client="URLEncode(""[[Client]])"&sap-language=EN&%7Etransaction=KS03\" title=\"\" target=\"_self\" nav=\"web\">"[[L01 Cost Center Key]]+"</a>"
Clicking the <tick> button does not return any error.
When I click on the Cost Center column, the SAP transaction is launched successfully. However, there're still a few issues:
1) The Cost Center Key is not passed to the SAP transaction. Is Tool Tip the way to go?
2) When checking the hyperlink (via right-click > Hyperlinks > Edit Hyperlink), I found the Tool Tip (L01 Cost Center Key) has disappeared
3) After I've clicked <OK> to exit the Edit Hyperlink window, I got the error message 'Invalid character '[[MyServer]]' at position 14. (Error: WIS10080)'.
-- It seems correct syntax in the formula editor is considered invalid in the hyperlink editor.
Do you mind commenting on what could have caused the above issues?
Thanks again for your time.
Linda

SAP Transactions available in Web GUI

Similar Messages

Maybe you are looking for