Unable to access Data Plan

I just bought an unlock Verizon Blackberry storm 9550. I I tried to activate a data plan with Digicel Trinidad and i am getting a message stating that "Can not activate selected plan your device is incompatable with the service". Could you please help me in resolving this issue??

Check your Mobile Network and make sure you have it set to "Global"
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

TS3992 My Icloud back up shows huge amount of data stored from back up yet listed as incomplete. Unable to access data. Is data lost

My ICloud backup shows a huge amount of data stored, yet it is listed as incomplete backup. I am unable to access the backed up data. Is the data lost?
Thank you in advance for your assistance.

Unfortunately, if an iCloud backup is incomplete you can't access any of the data in it. The only way to access anything in the backup is to restore the entire backup, which can't be done if it is incomplete.

Unable to access data returned by EJB

Hi,
One of my EJB method(getHeaderInfo) returns string array (String[]). In the WSDL, I have following entries -
<complexType name="GetHeaderResponseType">
<sequence>
<any/>
</sequence>
</complexType>
<message name="GetResponseMessage">
<part name="header" type="tns:GetHeaderResponseType"/>
</message>
<portType>
<operation name="getHeaderInfo">
<input name="GetHeaderInfoRequest" message="tns:GetHeaderRequestMessage"/>
<output name="GetHeaderInfoResponse" message="tns:GetHeaderResponseMessage"/>
<fault name="GetHeaderInfoException" message="tns:ExceptionMessage"/>
</operation>
</portType>
<binding name="EJBBinding" type="tns:Data">
<ejb:binding/>
<format:typeMapping encoding="Java" style="Java">
<format:typeMap typeName="xsd:string" formatType="java.lang.String" />
<format:typeMap typeName="xsd:boolean" formatType="boolean" />
<format:typeMap typeName="tns:ExceptionType" formatType="java.lang.Exception"/>
<format:typeMap typeName="tns:GetHeaderResponseType" formatType="java.lang.String[]"/>
</format:typeMapping>
<operation name="getHeaderInfo">
<ejb:operation
methodName="getHeaderInfo"
parameterOrder="filepath filename" interface="remote" returnPart="header"/>
<input name="GetHeaderInfoRequest"/>
<output name="GetHeaderInfoResponse"/>
<fault name="GetHeaderInfoException"/>
</operation>
</binding>
When I execute the process I get following data in the output variable -
<header >
<header xmlns = "http://callhome.pillardata.com/" >
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
1 </string>
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
BrickFlashDataRecord </string>
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
IDcbefc68f </string>
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
A001439BGX </string>
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
2005-12-14T18:00:20-08:00 </string>
</header>
</header>
However I am not able to access data using XPath. Please suggest the proper way to write the WSLD and how to access the returned data in BPEL. Please let me know if further information is required.
Thanks,

Hi Justine,
I think you will have to look at the access restrictions on the Universe Folder and the Report itself, in the CMC. It would appear that your security rights did not migrate successfully.
Regards
Alan

Unable to Access Data Form with Users Provisioned as 'Planner'

Hello,
I am currently experiencing an issue that I can't seem to resolve. I was hoping someone else might have some insight and/or have come across this issue.
I created two data forms. Users have been assigned permissions to the dimensions included in the data form. I have also assigned users access to the data form. The model is a single currency model.
Upon logging into the application, the user is unable to open the data form unless he/she is provisioned as an 'Administrator'. Provisioning the user as a 'Planner' or 'Interactive User' does not allow the user to open the data form. The following message appears:
*"Security and/or filtering has resulted in a required dimension not being represented on this data form."*
My data form uses the following dimensions:
POV: ELEMENT
PAGE: SCENARIO, YEAR, VERSION, ENTITY
ROWS: ACCOUNT
COLUMNS: PERIOD
We are currently implementing Hyperion Planning 11.1.2.0. The operating system is Windows Server 2008 64-bit R2.
Any advice/suggestions on how to resolve this would be greatly appreciated. Thank you.
Corey

I went ahead a created a data form that just used level 0 members and confirmed that the user had access to the members defined in the form. Still no luck.
I also checked to make sure the filters existed in Essbase. Here is what I found in Essbase:
Access: None
Member Specification: @IDES("Account"),@IDES("Scenario"),@IDES("Version"),@IDES("Entity"),@IDES("NTTA_ELEMENT")
I have no issues accessing the data through the Essbase Add-in.
I did notice some additional items in my Planning setup:
1. Task>Manage Process - Sub-Status states 'Failed' when I attempt to validate
2. Task>Manage Process - Status changes from 'Not Started' to 'Under Review' when I start the cycle.
3. Dimension Security - Users are attached to a group that has write access at the Descendent(Inclusive) level.
4. In the Account, Department, Scenario and Version dimensions I also setup the user to have write access at the member level.
As for my earlier post with the data forms, that was just my way of showing the dimensions used. I do have two data forms, 1) with top level and descendants/children and 2) with level 0 members only.
I checked the logs and there isn't really much info there. I have a case open with Oracle and a webex scheduled for tomorrow.
Thoughts?
Thanks
Corey

Unable to access data downloads-need to read javascript/active x

I UPDATED THE GRAPHICS DRIVER TO ENABLE DATA DOWNLOADS but I am unable to open files. The reason given was"this file requires your computer to read javascript?active x".
What more can I do? I need to access these files!!!!!

Firefox doesn't do ActiveX. <br />
https://support.mozilla.com/en-US/kb/ActiveX

Unable to access data/storage space of failed primary partition after internet recovery

Hello,
So just a bit of quick background info to the issue: I experienced my first major failure with my iMac a few weeks ago (early Feb) where the main partition on my 3TB Fusion drive developed a corruption of some sort. I went through all the disk verification/repair procedures I could find, however nothing worked and I ended up with a grey screen on bootup that had a round logo with a slash through it. I tried a reinstall of OS X Yosemite from the recovery partition, however this failed part-way through, and I was forced to perform an internet recovery instead.
This worked, and I now have my iMAC stable again, however the recovery process created a new primary partition in addition to the old primary partition. This wasn't a major issue for me as I planned to recover some files from the failed partition that my backups had missed. Unfortunately since then, that old partition has disappeared and I can't get it back. I figure I have lost those files, but what is really annoying is the space that old partition took up has not freed up. My 3TB fusion drive is only letting me use 120GB of the space (the size of the new primary partition).
So I guess I have two questions:
1 - Is there a way to find and get the old partition back mounting again? The drives that list with a 'diskutil list; echo; diskutil cs list' command are attached, but do not appear to contain the old partition that I am after (I've tried manually mounting them via the terminal to check).
2 - If recovering that old partition is not possible, how do I go about freeing up the space it occupied?
System details:
OS X Yosemite v10.10.2
Mac (27-inch, Late 2012)
Processor: 3.4 GHz Intel Core i7
Memory: 16 GB 1600 MHz DDR3
Any assistance on this one would be greatly appreciated - I can't restore all my files from backups as I am running low on HDD space.
Cheers,
Nick
diskutil list; echo; diskutil cs list
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *3.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Promise RAID            3.0 TB     disk1s2
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk2
   1:                        EFI EFI                     209.7 MB   disk2s1
   2:          Apple_CoreStorage                         120.5 GB   disk2s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk2s3
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *120.2 GB   disk3
                                 Logical Volume on disk2s2
                                 B1226A78-ED30-4C0E-B398-216050D00D99
                                 Unencrypted
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 776BF278-C2A1-4AE9-A333-54698D103F63
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         120473067520 B (120.5 GB)
    Free Space:   0 B (0 B)
    |
    +-< Physical Volume 9E51C38B-4FFA-412E-BDD5-3454C7A54658
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk2s2
    |   Status:   Online
    |   Size:     120473067520 B (120.5 GB)
    |
    +-> Logical Volume Family 6BCF921C-0CAF-4567-88C1-9EF69D4D8D17
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume B1226A78-ED30-4C0E-B398-216050D00D99
            Disk:                  disk3
            Status:                Online
            Size (Total):          120154292224 B (120.2 GB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS

Hi Eric,
See attached screen shot - is that what you are after?
As you can see I don't have access to the rest of the 3TB fusion drive. I'm thinking I may have to do a clean OS install so I have prepared a Yosemite USB install key ready to go.
Unless you guys can suggest something that is.
Thanks in advance for your help,
Nick

Unable to access data after running disc repair

I ran disc repair today as there is a problem with the hard drive. On restart the computer is displaying a login page. I have never had to login and now I cannot access any of my files or applications. How can I access my data?

Jugnu, welcome to Apple Discussions.
You posted in the Older Apple Hardware forum, but you have a relatively new Mac and are using Panther. Suggest you repost in the Panther forum at http://discussions.apple.com/forum.jspa?forumID=745
 Cheers, Tom

Unable to Access New Planning Application via Workspace

Hi all
i have installed a new Planning server into the existing platform (there is no hardware load balancing so is seen as a single instance of planning) however i am using the existing workspace and HSS.
I have successfully installed and configured the new Essbase and Planning Products and registered against shared services. The issue i have is that i cannot get the new Planning application to be viewable via workspace. I get Application is invalid.!!.
The original (Existing) Planning on server 1 is set to 'Active Instance' in the product registration and these apps can be viewed by workspace etc.
I have created Planning on Server 2 and have created a new instance, but not set the 'Active instance' in the product registration!!!, i have also registered this as the web host tier on the Server 2 not the Server1.
If i use the direct planning URL's for either Planning Server 1 or Planning Server 2 i see the planning applications that are on each server!!
Can anyone tell me what configuration i have missed out! If it helps the Planning Server 1 has its own Shared Services Project and Planning Server 2 has its own Shared Services project.
I have restarted services on Server2 BUT not Server 1 as i am not allowed an outage until the end of the month!!.

Hi,
Did you create a new Planning app in your new environment? Can you access this new app as a test?
You will need to asociated your app with an active instance and datasource.
In the workspace, when you go to Navigate - Applications - Planning, do you see your Planning app or is it not there at all?
Did you check the logs for any errors? Are you sure the user you are logging on to the Workspace as has been provisioned for that planning app?
When you configured BI+ did you make sure you ticked Planning?
Seb
www.taysols.com.au

Unable to access Call Plan or Features on web site

I seem to have no access to my Call Plan or Features on the web site. All I get when I try to get to these pages is an apology and a message that I can make changes by phoning a BT helpdesk.
Is this because I only went live with my account yesterday, or is there a problem that needs fixing?

Hi Gewitty,
Are you referring to your eBilling account at www.bt.com/youraccount?
It usually takes about 48 hours for it to be fully activated, can you let me know whether you're still having problems accessing it?
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Unable to access data n 0PY_PP_C3 ODS

Hi,
We have extracted Payroll data and consolidated data is sitting in "Auditing and Postings Combined" ODS.
When I try to see the contents, its saying that I don't have authorization to see the same.
HR Functional Team is trying to access this data. Which ROLE and Authorization, we should have.
Its urgent. Please do let me know,

Hi Anand,
Normally the users are not given authroization for HR Cubes/ODS. Goto PFCG -> find the corresponding role and add yourself to that role.
Bye
Dinesh

Hi, I forgot my password due to that unable to access data plz help me out

hi,
I purchased iphone 4s recently from canada where i put phone password which i forgot my password due to which not able to access my data

If you cannot remember the passcode, you will need to Restore your device...
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

Unable to Access Calling Features or Calling Plan ...

I was wondering if anybody could advise if there is a dedicated support team for issues with BT.com. I am having issues when attempting to access either the Calling Features or Calling Plan Pages from BT.com. I have no problems viewing recent usage or Billing etc. and I am able to make payments. When trying to access the Calling Plan I receive the following error ... "We're sorry. Sorry, we can't continue your request with the account number provided. Please call us on 0800 800 150 to continue." The Calling Features page, returns this ... "Sorry, we can't change your Calling Features at the moment. Sorry, your account number wasn't recognised. Please check and try again." I have tried the 0800 number but nobody seems able to help and I eventually got cut off as I was transferred for the fourth time, so I thought I would see if anybody else has had the same experience and could help me short cut the IVR. Many thanks.

I also have the same problem. Here is a copy of the email I sent BT after spending a frustrating amount of time talking to their call centre to people who clearly did not have a clue. What is worse is they do not seem to have an escalation process to deal with problems that are not on their script and that they do not understand.
>>>
Sir,
I am writing to complain about the exceedingly poor customer service I received today.
I have for a long time managed my account TH******* on line. Last year I added account GB******* to the list of accounts I manage online. Ever since this account has been set up I have noted that when I select the 'calling plan' option for this account I get the message "Sorry, we can't change your Calling Plan at the moment. Please call us on 0800 800 150 to continue" and when I select the 'calling features' option I get the message "Sorry, we can't access your account information at the moment. Please try again later".
Today I tried to do something about this. As directed I called 0800 800 150.
Issue 1. None of the 4 options (i to place or check on an order, ii calling about a bill, iii moving home, iv a fault or need help with your service) actually apply to what I am calling about but I am forced to listen to them twice because there is not get out option supplied until the recorded message 'you do need to choose one of the options.'
If you provide a number to call from a website then that number should provide an option that actually applies in the circumstances relating to the reason the number was given. In this case I am calling because the website is not functioning correctly. There was no option for that.
Issue 2. Before I finally managed to reach a person, I was asked to enter my phone number and my account number. But when I reached an 'advisor' she asked for my account number again.
If your system does not pass the account number through to the advisors, why make me key it in. If it does, why am I asked for it again?
When I finally managed to speak to someone after selecting a range of inappropriate options I explained my problem. At first, she just offered to help me change my package. I explained that this was not what I was asking but that I wanted to be able to manage this account online. I was advised that there is currently a fault on the website and that I should try again later.
On reflection, I decided that this answer was inadequate since I could clearly see both of the options on the account TH******* and I had never been able to see these options on the new account since it had been set up despite having tried several times.
Issue 3. The answer given does not seem to address my problem.
So I called again.
Repeat issues 1 & 2.
This time I reached Kamal in billing and services. Similarly he just offered to help me change my package. I explained that this was not what I was asking but that I wanted to be able to manage this account online. I explained that I could do this for account TH... but not account GB... After some time he came back with the answer that it was not possible to do with GB accounts but was with TH accounts. I expressed incredulity and asked to register a complaint about the fact that I could manage one account comprehensively but not the other. I then noticed for the first time that on the 'Accounts' page on the website, there was no telephone number showing under the account number GB****** whereas there was under the account number TH******8. So I suggested that perhaps the account had not been set up correctly.
After some considerable time while he looked into this, put me on hold several times, and at one point suggested that he might have to reset my password, he finally came back to me with the response that there was a technical problem with the website and that I should try again in 24 hours.
Issue 4. It is unacceptable that I was kept hanging around for so long while he attempted to diagnose the problem.
Issue 5. Clearly, the advice he gave me earlier in the call that "it was not possible to do with GB accounts" was rubbish.
In all, this was a totally unsatisfactory experience. I am hoping someone can explain why your system is so convoluted and, in the end, inadequate. Most of all I would like to be assured that my account will now be able to be managed online - if not, why not.
I will try the system again in 24 hours as advised by Kamal. Hopefully I will find that it works.
>>>
Unhappily, it didn't work as I expected it wouldn't. One week later I still had not received a reply to my email so I emailed them again.
Finally, 4 days after that I received the following reply
>>>
The incident A/c no : GB****** - Unable to access calling plan online that you reported has now been resolved.
Please note that you have not attached telephone number while adding this account to online profile.
Please remove account and add again with telephone number after that you will able to access calling plan within 24hrs.
Thank you for your time in this matter and we apologize for any inconvenience that may have been caused.
<<<
Note that they are telling me the problem is my fault. What do they mean 'you have not attached the telephone number' - I can clearly see the billing information for this number so it clearly is 'attached' to the account.
After hunting for ages on their website to find an option to delete the account as suggested I eventually found it, pressed the delete button and ....
You cannot remove this account from your profile. For further assistance, please call 0800 800 152.
We're sorry, but it's not possible to remove this account from your profile at this time.
OMG!
So I guess I am going to have to spend yet more time on the phone to them. I'll let you know how I get on.
Phil

Cannot backdate data plan reduction?

Is it not possible to backdate data plan reductions? Last month my family was traveling and using hotspots. Used a lot of data and increased our plan to 14GB. I did so at the end of the month, via the backdating option which allowed me to avoid overages.
Now its a couple weeks into my bill cycle and I am trying to reduce the data plan to a more reasonable amount. Only thing is that I am not getting the option to backdate the reduced cost of the plan. What gives? Its nice that they allow us to backdate a data plan increase to avoid overages. Why not on data plan reductions as well? Should I not be able to reduce my data plan according to how much we use each month? We are not computers running the same calculations each day and the amount we use varies without any pattern. It is a nuisance to have to manage the data plan two times each month--one at the end to backdate to more data if necessary, and then one in the beginning after the next cycle begins to chose a lower plan since we are unable to backdate data plan reductions.
Just seems like this grouped data plan thing is another way for Verizon to screw over the typical and even experienced users who may not necessarily have the time to spend on managing these things.
In an ideal world Verizon would charge a scaled price per MB where each MB becomes cheaper after a certain amount used, each month. Similar to how the current plans are cheaper per MB at the top end. The only difference in this ideal world would of course be no overage charges and no worrying about buying more data than you need. You'd think that with all the **** money they are making (selling data is huge profit) they could at least make it easier and more fair for the customer. Really ticks me off.

ihaveacellphone wrote:
Yeah there is a reason I didnt lower my data before the end of my last cycle. Its because I had to raise it via backdating to avoid overage. Did you read my post?
The point is that when you go over at the end of the month you can backdate to more data. That is fine. But the thing is, unless you check back when the next cycle begins, you are stuck with that plan for the rest of the month / until you remember to change it to less data...
At which point, for whatever reason, you only have the option to prorate the cheaper plan rather than backdate for a complete reduction of cost.
"If Verizon wanted to make money on overages they'd charge $1 per GB" Do you honestly believe that? You must have stockholm syndrome or something. You cannot possibly think Verizon charges $15 overage to prevent people from going over. If someone is having overages it means they are not familiar with the tiered data system, and that will not change whether the overage is $15, $5, or $.5 per gb. Verizon wants you to overuse your allotted data because it makes them more money, period. There is simply no argument against this. You go over .1 gb, you are charged $15. If they were reasonable they would charge per kb or even mb. The average user would not have to understand the difference because they would understand the correlation between how much data they overused and how much additional data $$ was added to their bill. Your elitist disposition once again makes me consider your employment with a company so eager to **** its customers. Maybe you have just taken it from them for so long that you have started to enjoy it.
A) Your point still doesn't make sense. You backdated so you wouldn't go over. Seems to have worked out. Seems that is what you intended to do. The next month simply switch back to your old data plan. You should know when you billing begins. So I'm still not seeing the issue.
B) Enough with the insults. Simple fact Verizon doesn't want people hogging the network otherwise it slows down then they'll be Sprint. $15 per GB assures more people keep tabs on their data plans. Unless they are dumb. Of course if one insists on hogging the network sure they'll gladly take the $15 per GB. At $1 per GB most people wouldn't care about going over a GB or 2 every month. Verizon would make a ton more money of those $1 or $2 than they a will on the $15. No that many people will go over at $15 per GB. FACT.
C) As I stated you per MB or per KB charge will just lead to more confusion on bills. People are already confused even though Verizon's plans are pretty simple. The fact is if Verizon charged 1.5 cents per MB which equates to $15 per GB I am 100% positive there would be plenty of people angry that they went over by 1 GB and got charged $15 because they don't understand there is 1024 MB per GB. Here's an idea, DO NOT GO OVER. If you find you are going over, UP YOUR PLAN. here's another idea, it's called wi-fi use it. We have 5 smartphones on a 6 GB plan in which we have yet to use even 3 GB a month in the 8 months we have been on it.
D) I do not nor have I ever worked with Verizon. I would clearly be marked as Verizon employee in my username an avatar. Just because I choose not to believe in conspiracy theories where all the corporations are part of one big cabal run by Dr Evil doesn't mean I work for these corporations. Also I do not like you using the word ****. Some of us have family members that have been raped for real and you getting billed "too much" for data is no where near the same thing. If Verizon is so bad then you are free to choose another carrier that suits your needs.

My iPAD cellular data plan. I no longer know which old e-mail I originally used to set up my account. Any info on how to recover a lost account access? The only thing on line is a lost password function but it send info an e-mail no longer valid..

My iPAD cellular data plan was set up with an old e-mail account and I no longer have access to this e-mail. The password is forgotten. I am unable to access my cellular data plan to update my 3G. Any help on account access when you no longer can remember the access information?

I called AT&T at 1-800-331-0500 and asked for Ipad support. They are going to send me a new SIM Card. This will solve the problem. Paul

User In Planning unit Hierarchy unable to see data form in editable mode

hi all,
we are facing a problem in planning unit hierarchy in Hyperion planning, where we have 4 users, Hierarchy is define as
hierarchy: budget approved
version: approved
Entity: Finance
Senario:Budget
haroon asghar ( owner)
adeel javid (Reviewer)
Naeem asghar (Reviewer)
Imtiaz (Reviewer)
Issue is that,after start the budget activity (promotional path) by Admin, the data form editable to Owner haroon asghar
but after completing his work by haroon,when he promote the planning unit ,the next user in Hierarchy "Adeel javid" unable to see data form in respective planning unit in uneditable data form not only for this user but all rest of the users as well,while i think data form should only uneditable(grayed) for user Haroon Asghar who promote the planning unit.
we have checked all security rights to the users those are "Write access" but still Adeel javid is unable to enter data,so the budget activity is stop due to this problem.
when i remove the planning unit then i log in with all user one by one and see all data form required version,scenario and entity were editable to all users mention above
we want to run budget activity with the above planning unit hierarchy.
plz any one provide the proposed solution of the said issue
we are using Product Version 11.1.2.0.00
Regards
Anwar

Reviewers will not be able to write data to the intersection. Reviewers can only review the data and follow-up with a Reject, Promote, Sign off, Delegate, Originate or Freeze.
Please refer Article ID 1226783.1 in MOS.
HTH-
Jasmine.

Unable to access Data Plan

Similar Messages

Maybe you are looking for