What settings do I need to have on my macbook pro to access student.ashford.edu when I get the following error message: The system is unable to process your response at this time. If you feel you have received this message in error. Please contact your Sy

what settings do I need to have to access Ashford University's student portal using either Safari or Firefox when I get the following message: The system is unable to process your response at this time. If you feel you have received this message in error. Please contact your System Administrator, or try again at a later time.

I am able to get to the Ashford University login display with no difficulties with both Firefox and Safari. Obviously without a student password I cannot go any further. If you can do the same, then clearly the problem is at the other end. If that is the same case with you, then there is no advice that I can give you but to stir the pot as best you can.
Ciao.

Similar Messages

What cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

what cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

Actually you need a Thunderbolt to HDMI adapter. It will carry both audio and video.
This one will work: Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support

I have an old MacBook Pro, which just upgraded to OS X 10.10.3...in the process iPhoto disappeared, along with all my photos! I'm shocked, and have no idea what to do (furthest thing from a techie). Help??

I have an old MacBook Pro, which just upgraded to OS X 10.10.3...in the process iPhoto disappeared, along with all my photos! I'm shocked, and have no idea what to do (I'm the furthest thing from tech). Did the photos go into iCloud? I have a photos icon now in the place of iPhoto, but no photos! Any suggestions or help?

Niel, thank you! Can't get iPhotos, but found my photos after clicking "photos" in the new app, after your suggestion. (option, click). Whew! I panicked, and appreciate your help. I'm going to miss my old iPhoto!

What adapter do I need to connect my 2009 Macbook Pro to my 2007 iMac?

What adapter do I need to connect my 2009 Macbook Pro to my 2007 iMac? I get really confused with all of the different cables out there an I want to make sure I get the correct one.
Macbook Pro Model is: Late 2009, 2.26 GHz Intel Core 2 Duo, 8 GB 1067 MHz DDR3, OS X 10.9.4 (13E28)
iMac Model: Late 2007, 2.4GHz Intel Core 2 Duo, 4 GB 667 MHZ DDR2 SDRAM, OS X Mountain Lion (10.8.5)
Thanks!

The 2007 iMac does not support cabled input. see > Target Display Mode: Frequently Asked Questions (FAQ)
Like Niel suggest's, your only option is to use a network based connection like > ScreenRecycler

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone. What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.

I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

Most likely won't run SL unless it's one that was released before Lion went public. Color SL gone from new Macs.
27" i7 iMac 10.6.8 , Mac OS X (10.7.2), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)

I have a new macbook pro, just downloaded some updates and when I clicked to restart it went to a grey screen and is not restarting.

I have a new macbook pro 17". Just downloaded some updates (10.7.1, itunes etc.) and when I clicked to restart, went to grey screen and unit is not responding. It has been about 30 min.

Hi j,
Gray Screen at Startup (try Safe Boot)
http://support.apple.com/kb/TS2570

I need help: I've a macbook pro with Mavericks....when I click on the Firefox icon on the fox, it just jumps and then eventually invokes slowly. What can I do?

basically, when I boot up the mac, I click on the firefox icon...it just jumps and sometimes it executes. I probably would have to wait a bit for trying to get into the browser successfully. Anything I can do? Thanks

Hi,
This article [https://support.mozilla.org/en-US/kb/firefox-takes-long-time-start-up] suggests that you
#Change your homepage
#Check to make sure your extensions are up to date
# Check to make sure that your antivirus allows Firefox
#Check to make sure that you have the preference "Do not load tabs until selected"
However, I would recommend that you close other programs and clear the cache of the profile to increase the load time. [[How to clear the Firefox cache]] A quicker way to do this if you do not have any immediate data to save is to Reset Firefox. [[Recovering important data from an old profile]]

Hi there. I have received a message with a heading software upodate.. it says that something is trying to trip firefox into accepting an insecure update. Please contact your network supplier. Please help

This message has appeared before, I thought I had dealt with it but it has just appeared again.
I have also lost my firefox desk top page with the world logo enwrapped with a fox

Apparently this occurs when Firefox has problems with security certificates. There have been a few questions about this. I will try to get advice about this.
Apparently you are using Internet Explorer 9 (From your system details). Do you have Google Updater plugin installed on Firefox ?
(That been implicated in this sort of problem by one poster, and some users with the problem do have Google Updater, but some do not)

HT201250 i have format my macbook pro and lost all data how could i get back again please advice me?

plz help

"Data Rescue II" from prosofteng.com has a free download demo available. You will need to follow/read the directions carefully.
VirtualLab™ Data Recovery has a free download demo available.
DriveSavers Data Recovery is NOT free. However, they have a toll free contact phone #, international phone # & fax contact #'s. Also helpful Recovery Tips and Disaster Recovery for important precautions to prevent further data loss on their website.
http://www.stellarinfo.com
Stellar Phoenix Macintosh -- Mac data-recovery software -- recovers data from damaged, deleted, or corrupted volumes, and even from initialized disks. An exhaustive scan of the drive is performed to locate lost partitions. All found data in the lost partition is then presented in a tree structure so that you can copy your lost files to a working volume.
*FREE* DOWNLOAD DEMO
FileSalvage
**FREE** Download DEMO
Remo Recover
**FREE** DOWNLOAD TRIAL
FILERECOVERY
**FREE** DEMO
Professional data recovery specialist service. They are very expensive. Might be worth it depending on how important your lost files are.

Have a new Macbook Pro. While in IMovie, having completed a project and attempting to send to IDVD, am unable because the IDVD choice does not appear on the drop down under Share. How do I find or add IDVD to my new Mac.

While in IMovie, having completed a new project and wanting to send to IDVD, I choose the Share icon but the IDVD is not in the choices of the dropdown. I can't find or locate IDVD on my new Macbook pro Please help, anyone

Buy and install an iLife 09 or 11 DVD from a source such as Amazon or eBay.
(99166)

What external drives work well with a late 2011 MacBook Pro? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also should I avail myself of something that works with Thunderbolt or Firewire?

What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also, should I avail myself of something that works with the Thunderbolt or Firewire connections? I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).

Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
There does seem to be a lot of prep to make it work:
"1. Preparation to install your new shiny SSD
1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
Also in those reviews:
" Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
Personally I only deal with OWC:
http://eshop.macsales.com/shop/SSD/OWC/
They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
As far as value for price:
http://eshop.macsales.com/item/OWC/MES3FH7500G/
500 GB for $130.
However as far as reliability is concerned:
http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
So sudden power loss is an issue with SSDs.
Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable.

An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

Hi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
     Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
     Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..does App "Numbers" help here?

Numbers should be able to read Excel files without any problems. If Numbers does not read the graphics properly then you can try Excel Online. https://office.live.com/start/Excel.aspx

I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you ad

I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise? During installation emptied cache, etc. Backed up using time machine, fortunately.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

What settings do I need to have on my macbook pro to access student.ashford.edu when I get the following error message: The system is unable to process your response at this time. If you feel you have received this message in error. Please contact your Sy

Similar Messages

Maybe you are looking for