1.78 instaed of 2 GB??

Why do I have 1.78 GB capacity on my iPOD nano instead of 2GB? I restored my iPOD and it shows free space - 1.78 GB other - 832 KB???

This is perfectly normal and is due in some part to file system formatting and the space taken up by the iPod's operating software. You'll see the same thing if you connect any flash memory stick. For instance my 1GB memory stick is reported as 980.7 MB. With hard drives, there's a difference between how manufactures calculate capacity and how the operating system calculates it. You'll see an example of that if you look at the size reported for your own computer hard drive. My 300 GB hard drive is reported as 279.36 for instance.: How much content will fit on my iPod?

Similar Messages

Insta Graphics

Hi.
I have Dreamweaver CS3 and Fireworks MX2004 on my computer. I
downloaded the Insta Graphics extension, and get an error:
ReferenceError: done is not defined.
How can I get this to work? Will this extension not work with
CS3?
Thanks,
Steven

I would imagine not. The InstaGraphics extensions were
released between
2001 and 2003 .. years before DW CS3 was created .. the whole
extension
manager has been rewritten since then.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Steven Nestler" <[email protected]> wrote
in message
news:fhft23$mfe$[email protected]..
> Hi.
> I have Dreamweaver CS3 and Fireworks MX2004 on my
computer. I downloaded
> the
> Insta Graphics extension, and get an error:
ReferenceError: done is not
> defined.
> How can I get this to work? Will this extension not work
with CS3?
> Thanks,
> Steven
>

Creating an unique index instaed of using primary key index

Hi ,
I heard in a debate sometimes it's better to create a unique index on a column and using it instaed of using primary key index in oracle.I couldn't understand what the reason propely.
Can anyone please help me in thsi topic if it is a valid one .
Thanks in advance

Hi,
They are exactly NOT identical.
1. Unique key can have NULL values where primary keys can't.
2. Primary key is fundamentally those keys which do not change. I mean updating a primary key is not a good idea.
SQL> drop table test;
Table dropped.
SQL> create table test ( a number(2));
Table created.
SQL> ed
Wrote file afiedt.buf
1* create unique index test_idx on test(a)
SQL> /
Index created.
SQL> ed
Wrote file afiedt.buf
1* insert into test values(NULL)
SQL> /
1 row created.
SQL> drop table test;
Table dropped.
SQL>
SQL> create table test ( a number(2) primary key);
Table created.
SQL> insert into test values(NULL);
insert into test values(NULL)
ERROR at line 1:
ORA-01400: cannot insert NULL into ("HR"."TEST"."A")
SQL>Cheers,
Edited by: Avinash Tripathi on Nov 24, 2009 11:17 AM

Scrap to post to profit center instaed of cost center

Hi,
How can I make the movement type 551 post directly to the profit cneter in the material instaed of a default cost center.
thanks

Hi
Make profit center field as optional for mvt type 551 in OMJJ (mvt type 551) - field selection- additional account assignments and try posting to a profit center.
Thanks
Edited by: Praveen Raghavendra on Apr 8, 2009 7:31 AM

Insta ink problems

I installed my insta ink black cartridge several weeks ago. My account shows that I haven't printed any pages (not true). I am busy during the week. I would really like to get assistance via email, rather than wait around to have some one call me or to try and rearrange my schedule.
does anyone know how I can contact support via email? I tried the chat feature but they said they couldn't help me.

Hi. We currently don't have email available for support for Instant Ink. If you have the chat ticket number I'd like to follow up and find out why they couldn't help you.
When I look up your account it shows that you are enrolled but you have not installed the Instant Ink cartridges yet. Can you please double check that you have installed a cartridge with a label that says "Instant Ink 61/301", it would have come about 10 days after you enrolled, in a Welcome Kit (not the pen from the printer box). You can find a visual of what the ink cartridge looks like in this video:
http://support.hp.com/us-en/product/HP-Instant-Ink-series/5264756/model/5401249/document/c03767639/
If you DO NOT have the instant ink cartridge installed then your account page will not track pages printed. Just use up the ink you have and then put the Instant Ink cartridges in when you run out. (These will be in a Welcome Kit sent to you)
If you DO have the Instant Ink cartridge installed then go to your your Instant Ink account page (which it sounds like you know how to do) and ensure your printer shows online and under the "status section" hit the refresh button until the printer refreshes to the current date and time. It may take a couple times to get it current.
If neither of these work then there may be an issue with the cartridge and you would need to either chat or call our Customer Support at 855-785-2777. Either one will be able to help you. Please let me know if this solved your problem or you need more assistance.
Thanks,
JillSa
I am an HP employee.

How to populate a table instaed of creating a file

Hello Everybody,
I have been thinking if any of you has ever done simmilar thing..
I have a crontab task that runs a script that gathers some space statistics each month from couple of servers..and sends an output to a file..
how to redirect that output so it populates certain table in the database?
can you recomend best approach?
thanks a lot,
agat81

The easiest way would be to create your file in a way that it will look like
insert into your_table_name values (bla, 1,2 ,3);
insert into your_table_name values (blub, 4,5 ,6);
commit;
Then execute the script with sqlplus from cron.
cu
Andreas

Message reader problems after Microsoft Apps insta...

My previous thread was delete due to forum rules infringment.
I describe here again my problem, hoping to have a solution and considering that the problem I faced was not my fault, but it happened after a Nokia official update downloaded via Ovi Suite.
On 15th of April I've installed the Microsoft Apps and after my C6-01 reboot I found that the application "message reader" does not work anymore (tapping on the blue icon in the homescreen had no effect).
The only way to use the message reader was going in the incoming SMS folder, select a message anoose "LISTEN" from the menu. In this way the reader works.
Some days ago someone in this forum suggested me to remove the configured mailbox and try; in this way the reader came back to life and worked again, but if I add a mailbox the problem come back and the reader is malfunctioning again. So the only way to have this application working is removing any mailbox from my C6-01.
Therefore, considering that this problem occurred after an official update from Nokia and not for an user's error, I would like that Nokia tell me how to solve this malfunction.
Thanks for your attention and forgive my poor english.

After the first time I installed Micro$oft App$ I did a deep reset pressing the four keys as described in a web site I've found. After this procedure my C6-01 rebooted without many applications, so I have connected it to Ovi Suite and restored the firmware. The result was a "brand new" and perfect phone, until the new installation of M$ Apps on 11th of April :-(
So we are three Nokia users with the same problem... and we will faithfully wait for a fix ;-)

Can I use bind variable instaed of writing static COLUMN Name

Hi , I am having a table containing id and column names, the data is stored against that id in other tables. Now I wish to update data into another table so that it goes into apppropriate column without using decode function.
I am trying to do this:
EXECUTE IMMEDIATE 'update TEST set :1 = :2
where PROJECT_ID= :3 and UNIQUE_ID= :4' using P_DEST_COLUMN, P_TEXT_VALUE, P_PROJ_ID, P_TASK_UID;
the values P_DEST_COLUMN, P_TEXT_VALUE, P_PROJ_ID, P_TASK_UID are populated using a cursor in PL/SQl
Is this statement valid? If not can you tell me how to do it as I am getting some error I am unable to comprehend.
thanks
Rishabh

Column names cannot be substituted at run-time as bind variables. If you need to specify the column name at run-time, you'd need to construct a new string and execute that string dynamically, i.e.
EXECUTE IMMEDIATE 'UPDATE test SET ' || p_dest_column || ' = :1 ' || ...From a data model standpoint, storing column names as data elements in another table is generally a rather poor idea. It's likely to make ad-hoc reporting nearly impossible and to cause a lot more parsing than would otherwise be required.
Justin

E72: How to clean up files downloaded during insta...

Hello,
I upgraded quick office to ver 6 and noticed that phone memory has reduced by a big margin. From 190 MB to 177MB. Is there a way to clean up unwanted files from C: drive of the phone ? Are there are any apps that can do this clean up ?
Thanks

The new version of QuickOffice needs to be installed somewhere, and that's on your C: drive, so it's normal that you lose a few megabytes.
Please note that the original version of QuickOffice comes in the firmware (ROM), so the only way to update it without losing C: space would be if this is upgraded in the firmware (by Nokia).

My itunes won't work so i tried reinstalling and when it starts an error pops up that says: "the feature you are trying to use is on a network resource that is unavailable. click ok to try again, or enter an alternate path to a folder containing the insta

my itunes won't work so i tried reinstalling and when it starts an error pops up that says:
"the feature you are trying to use is on a network resource that is unavailable. click ok to try again, or enter an alternate path to a folder containing the installation package 'Itunes.msi' in the box below
please help, its frustrating

first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you!

SOLUTION to "Software required for communicating with the iPod is not insta

Folks, I can not take credit for this.....you should send your checks to MarkinMadison. I've included his post in it's entirety. For me, this was the Holy Grail !!
My only comment is make sure when you are in the registry that you hit the "apply" button to change and add things.
This probably won't solve everyone's problem but it clearly solved mine (and I tried all other "solutions"), as well as Mark's.
Apple: please find out who MarkinMadison is and either cut him a big check or offer him free Ipods for life.
"Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
4. Exit out of the registry editor.
5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark"
Dimension 4600 Windows XP

I have also posted the same question, earlier today. I purchased two for my children and cannot get the iPod to communicate with the computer. I have the iTunes software on my system, but during the installation process I cannot click the NEXT button, once I plug the iPod cable in. The computer does not detect it. I have tried all 6 USB 2.0 ports. I even removed the Dell Jukebox and MusicMatch programs. I am not a computer savvy person - just a mom who wants to give these to my children for Christmas. This is the first "chat" site I have even registered on. I am so very frustrated. Hopefully, this can be resolved.

I think it is a shame for a company this large and world wide not to have live people to TALK to on the phone to help with issue instaed you have to type in to a computer . What happen to the personal touch and caring for your consumers it is SO frustrat

I don't understand why your company would not want to be customer freindly and helpful , If i wou;d have known there wwas no way of communicating with you other than typing i would not have purchased any of the ipod items we own . I think you should be ashame for your company for not adding a personal touch not every one is conputor savy and do make mistakes when typing but nno one in your company will help unless i chat online i don't always have time to do this and it makes me upset and angery when i have to talk to a computor instead of a live person I hanve talked to pple representive 2 were very freindly i was a complete A## and very rude i don,t understand how your company grows with bad attitueds and taking so long to respond back to you .I wish i could find another brand that did what the the ipod does andd i would toss mine for it .

First, please understand that you're not communicating with Apple when you post in these forums. Everyone here, with rare and limited exceptions, is just a fellow user.
If you want help directly from Apple with a technical problem with an iPod, you can either visit an Apple Store, if there's one near you, or you can call Apple tech support. You can find a list of phone numbers for Apple support for the various countries here:
http://support.apple.com/kb/HE57
If you are referring to problems with the iTunes Store, then as is common with most if not all download stores, Apple only provides technical support via email. I presume that they find it not to be cost-effective to provide phone support for such small purchases.
BTW, the forum you posted in, iTunes U, is for colleges and universities who provide content through the iTunes Store. For user questions about iTunes, use one of the general iTunes forums. If you want to comment to Apple, their feedback pages:
http://www.apple.com/feedback
Regards.

My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-insta

My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-install it but it did the same thing. Any ideas where to go next?
The fact that I uninstalled Bridge and reloaded it has me concerned as to what to do next.?

You need to force quit all other (real or fake) instances of the Application Manager. Instructions differ between Mac or Win.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Developers preview for Cyan update after 8.1 insta...

Need answers for Developers preview 8.1 update 1 Cyan?
Solved!
Go to Solution.

Wait till the Cyan update is made available for your phone ..If you are ready to go thru' the hassle of re-setting up the phone, you may try Nokia Software Recovery Tool

I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to insta

I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to install it on 2 different computers. PS they are both PC computers.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

When I open the download manager it says not supported by this architecture, what do I need to insta

When I open the download manager it says cannot be supported by this architecture. Do I need to install something?

Do I need to install something?
No. You need to get a new Mac.
Mylenium

1.78 instaed of 2 GB??

Similar Messages

Maybe you are looking for