1609 songs get reset

I don't want to reset my Ipod because of this new application, is there any way to avoid this, or copy all my songs to PC before reset it.
Thanks.
There's always up and down in life, we're in the shallow ground right now...

Not all the song, my comp keep freezing every time i connect my Ipod. that's why i kept avoiding auto sync.
thanks

Similar Messages

  • A Playlist based on last played date gets reset randomly

    The playlist I use most of the time is one that shows music that hasn't been played in the past 120 days.  Lately, at random intervals, the playlist gets reset as if iTunes has forgotten what I played the past day or so.  So some songs are having their last played date set back to an earlier time (or maybe a random earlier time, I can't be sure).  It looks to me like it's not just what has been played the past day or so that is being affected, but songs that have been played earlier, but not all of them.
    I've tried restoring the iTunes Library.itl and iTunes Music Library.xml files from a backup of the previous evening, and when I open iTunes things look OK, but within a minute after starting up the playlist will get reset again. Any thoughts on why this might be happening and how I can hopefully fix things so it won't happen?  Thanks very much for any ideas anybody can offer.

    Hi,
    Thanks for you replay and documentation, but it doesn't give me excatly the functionality I'm after. The only MTD calculation code the document provides is the calculation of the following functionality:
    "Month to Date (MTD) u2013 From the 1st of month to u201CKey Dateu201D - for current year." This doesn't give the the functionality I want, which is to retrieve a given vaule for a Key Figure for the last dates of the months in a year to calculate MTD and YTD.
    This way I have created the query is to have multiple hidden Key Figures that calculates the MTD and YTD.
    In Columns in Query Designer it will look something like this:
    Selection: MTD January--> Date = 31.01.2008, Key Figure (Always Show)
    Selection: YTD January --> Date= 31.01.2008, Key Figure (Always Show)
    Selection: MTD February --> Date= 29.02.2008, Key Figure (Always Hide)
    Formula: MTD February --> MTD February - MTD January (Always Show)
    Selection YTD February --> Date = 29.02.2008, Key Figure (Always Show)
    And so on....
    This is off course a simplified version, but it shows the core of the solution. What I want to achive here is that the dates used to get the Key Figures (last date of a month) is calculated as flexible as possible, so that the users can go back and forth in time without worrying about the leap year problem and so on. I have now used an offset from the last date of last year and this is good for all the normal years, but when it is a leap year the query will use wrong dates to get the key figure vaule for the last date of each month.
    Any ideas on how to achieve this without creating 12 different Customer Exit variables (one for each end date of each month)?
    Thanks
    Regards
    Oddmar Lid

  • Playlist get reset

    Hi forum,
    After syncing my ipod touch with the itunes the play list get reset to the first song on the ipod. is there a way to change it so it stays on the same song before the sync.
    thanks.
    Nick

    Whenever you re-sync, the iPod will lose its place in whatever you were playing prior to the sync.
    What you can do is make a smart playlist such that songs drop out of it after they get played (e.g. add criteria like "Last Played is not in the last 7 days"). That way, you can exit* the playlist or re-sync, then go back to the playlist and songs that you've recently played will have been removed.
    *Exiting the playlist will cause it to update if Live Updating is selected, and if you don't have 3.0 which seems to have broken Live Updating.

  • 3rd party signature handler set in Adobe Acrobat 9 Professional Extended gets reset

    Hi All,
    I have got a 3rd party digital signature creating plug-in i.e. MySign . I have set it inside 'Preference > Security > Advanced Preferences > Creation > Default Method to Use when Signing and Encrypting Documents' > MySign. If I restart Adobe Acrobat that setting is lost and the Adobe Default Security handler is then used.
    I don't want to set handler manually every time I restart Adobe Acrobat. I have figured out that Adobe Acrobat is creating a registry entry named aPrivKey against that inside cHandlers BUT it gets removed on Adobe restart if I set MySign as the handler in the first place.
    Similarly I want the same handler to verify signatures. For that I have set 'Preferences > Security > Advanced Preferences > Verification > Always use the default method (overrides the document-specified method)' along with the name of handler i.e MySign but on restart of Adobe, this is also gets reset.
    Any idea how to set my handler as default to sign & verify without getting it reset?
    Regards,
    Wahaj

    Hi All,
    I checked with Adobe X and this issue is not present there.
    Regards,
    Wahaj

  • HT4623 I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it on my phone when I unplug but not anything thru the stero except static. Help!

    I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it very slightly in my speakers if I turn up the speakers but it is so faint. It plays thru its own speakers and my radio plays thru my speakers in my car so my its not my speakers.Help! Thank you!

    Hi Novagurl2369!
    I have an article for you that can provide some helpful troubleshooting steps to address your issue:
    No sound through stereo headset1
    Inspect the headset jack for debris and clean if necessary.
    Connect the headset and make sure the connector is pushed in all the way.
    Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
    If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
    Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
    Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
    Try a different song or video.
    Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
    Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • How do I get albums out of "compilations'?  On one of my machined I can go to individual songs, "get info" and uncheck "part of a compilation", but that does not work on my office machine.  I would also like to be able to do this in  a group for an album,

    I don't know how so much of my music got lost by being labled "compilations"?  I would like to go back and catagorize it as it should be but the screens are gray and will not let me alter them as to the catagory I wish them to be in (or even the genere they are already labled?  On my home machine I can (by individual song) "get info and uncheck "part of a compilation" and when this is finished the album goes to the genere as it is listed?  Frustrating bit of hous keeping.  Help and Thanks  Chuck

    The Get Info. fields show up gray if the files is locked and iTunes knows it can't edit the file. Make sure the files are not marked as read only and, if necessary grant both your account and system full access to all files and subfolders of your media folder.
    You can set Part of a Compilation for multiple tracks from the Options tab of Get Info.
    See Grouping tracks into albums for tips on getting iTunes organized.
    tt2

  • Parameter gets reset and Multi-value parameter doesn't work

    Hi
    Two Issues:
    I've set the value of a Date parameter (Start Date) when moving from the home screen (Report 1) to the next screen (Report 2) as the first day of the current year (DateSerial(Year(Today),1,1). In report 2, if I try to change the Start Date to another date,
    it gets reset to the first day of the year. I had the default value set as the first day of the year and even after removing it, the Start Date gets reset.
    I've set a multi-value parameter (Area) in Report 1 that collects four integers. I pass Area to Report 2 (through Join (Parameters!Area.value,",")). I also used SPLIT (Join (Parameters!Area.value,","),",") to get the value.
    Then, in the data set, I call this parameter as "Select A1,A2,A3,B1,B2,B3 FROM TEST_VIEW WHERE ID IN (?)". But this query throws an error that the query could not be executed. I ran the same query on the server side and it runs fine.
    Note:
    We cannot reference parameter names as @area for example because the Composite Server doesn't allow that.
    Split and Join operate on strings but my parameters are of integer type. Is this an issue?
    Please help.

    1. Are setting an expression for available values of parameter in report 2? Is the value you pass a valid among the set of values?
    2. IN wont work with comma separated values. You need to parse the individual values out using a string parsing udf as a table and then join to that
    so in your case you would be like
    Select A1,A2,A3,B1,B2,B3 FROM TEST_VIEW t
    INNER JOIN dbo.ParseValues (@Area,',')f
    ON t.ID = f.Val
    ParseValues UDF can be found in below link
    http://visakhm.blogspot.in/2010/02/parsing-delimited-string.html
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • How do you increase/decrease volume on an iTunes song?  Also, some songs get cut off before they are over.

    This is in reference to Follow Up 286560206; under the control tab on "Libraries" the drop down indicates that a song can be increased in volume by pressing ctrl + up and decreased by pressing ctrl + down, but no matter how I try it nothing happens.  Also, some songs get cut short, and once I saw an option on how to lengthen the play time on a song, but I can't remember how to get back to this screen.  Thank you.

    Welcome to the Apple Community.
    Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
    If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

  • HT1386 Switched from ipod to ipod touch. When trying to sync songs get lost. Show in the library and playlist but a message says cannot be found. An exclamation symbol with a circle aroung it shows on the missing songs. How can I sync the new ipod touch?

    Switched from ipod to ipod touch. When trying to sync, songs get lost. Songs show in the library and playlist but get a message that says songs cannot be found. An exclamation symbol with a circle aroung it shows on the missing songs. How can I sync the new ipod touch?

    The ! Next to a song:
    The song can’t be located; it may have been moved or deleted
    To find them try:
    iTunes: Finding lost media and downloads
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Trackpad - tap to click gets reset on laptop restart

    I have set my trackpad setting to "tap to Click" but it gets reset every time I restart my macbook pro. Could you please help me overcome this problem!?

    Tap to click has to be enabled separately in your Windows partition. I'm assuming you've installed all the Boot Camp drivers - in which case you need to navigate to the bottom right of your task bar and press the little arrow to reveal all of your background services. You should see the Boot Camp logo. Double click on it (or if that fails, right click on it and open the Preferences menu) and you should see some tabs such as 'Startup Disk', 'Keyboard' etc. Navigate to the one called 'Trackpad' and you should find a checkbox for the tap to click option.

  • Keyboard "use F-keys as standard function keys" setting gets reset on system restart

    Hi all,
    I have set in system preferences -> keyboard to "use f1, f2 etc. keys as standard function keys" or rather I want to keep this setting set but unfortunately this gets reset on each restart-
    I'm wondering what happened, this used to work initially with Lion. I may have set somewhere something that resets this on each start but I have no clue what that might be.
    Machine iMac mid 2011, keyboard Apple alu keyboard with cable (pre-Lion layout).

    Thanks BDAqua...sure looked like the function had disappeared over time and appreciate the confirmaion. Hard to understand why a function like that would be taken away. The program I run uses function keys f3,f7,f11 and f23(shifted f11) and I have all working okay by turning them off in keyboard and mouse menus. The f23 is causing issued in that when I use shifted f11 the screen scrolls upward instead of passing along the f23 function. Looks like I will have to work around this since the operating system will not allow the function keys to just work "standard"...thanks by the way for the welcome...!!

  • Every time i download a album some of the songs get cut in half

    every time i download a album some of the songs get cut short. what is causing that to happen?

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, close and then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • Only a few seconds of each song gets imported from cd.

    only a few seconds of each song gets impoted, when im importing from a cd. why? how can i fix? it has bin doing that since i got itunes5. someone please help!

    hi y'all!
    it's worth checking through the usual suspects first. (the upgrade may have "outstripped" your current hardware/OS/driver setup.) Start with:
    http://docs.info.apple.com/article.html?artnum=93453
    and the following resources might also be helpful:
    http://docs.info.apple.com/article.html?artnum=300252
    toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
    keep us posted on your progress.
    love, b

  • Xsl:param or xsl:variable gets reset.

    Hi, I'm trying to keep a counter using a top level variable in xsl.
    <?xml version="1.0"?>
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
    <xsl:variable name="rownumber">1</xsl:variable>
    And every time my xsl calls a specific template, i want to keep a counter.
    <xsl:template match="row">
    <xsl:variable name="rownumber">     
    <xsl:number value="$rownumber+1"/>     
    </xsl:variable>     
    <xsl:variable value="$rownumber"/>
    </xsl:template>
    However, my variable $rownumber always gets reset to the default value of "1" everytime the template is called and returns a value of "2".
    Is there a work around for this? Is there a way to keep a counter in xsl? Can top level variable change?
    I don't want to count the nodes either....
    Thanks in advanced,
    jon

    You can't do that. Variables can't change. And there is no "workaround", as you put it. XSLT is not that kind of programming language. If you want to count something, you need to figure out an expression that looks at the incoming XML and determines the answer. This is often surprisingly easy once you stop writing programs that assume that statements are executed one after the other. For example, in your case it appears that you just want to count the number of "row" elements in the document. The XPath expression for that is "count(//row)". Or perhaps you want to count the number of "row" elements below the current node; that's "count(row)".

  • Why does my Share Name ID get reset every month?

    With my personal account, I prefer to be identified on the receiving end as "WIRELESS CALLER".  I can change this on my account.  However, once a month my Share Name ID gets reset back to my account name.  After updating this one a month for the last four months, I realize the problem is not on my end. 
    Verizon, what's up?
    Thanks.

    Hello, and thank you for responding.  I really appreciate it. 
    The steps you specified are exactly what I have been doing, yet the account resets back to my name.  To get it change back to WIRELESS CALLER takes the following steps and 48+ hours. 
    1) Once my account has been reset back to my first and last name, the Share Name ID screen shows no specific radio button being selected, yet shows the message:
    Your name is currently displayed as "WIRELESS CALLER" on Caller ID enabled devices.
    2) I select the middle radio button, my actual name (using your example) and click submit. 
    3) Wait 24 hours.
    4) I return to the Share Name ID screen and select the WIRELESS CALLER radio button, then click submit.
    5) Wait 24 hours.
    A caller ID device now shows my name as WIRELESS CALLER. 
    The indeterminate radio button and incorrect text in step 1 is the key. 
    Thank you.

Maybe you are looking for