2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??
2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??
Hi Peter,
Thank you for the note - I have seen similar replies on other posting errors and I see how that could make sense. The thing is, my iPhone is not jailbroken - it is from an authorized distributor. However, when I told them about the "no service" problem on the sim, they were unable to assist. Then my phone messaged that an itunes restore was required - so I did that, several times, to the error message now noted on my post. I wonder if there is some other way to over-write this message? Thanks very much.
Similar Messages
-
I have a new device. When selecting the language and country I am trying to connect to a wifi connection and getting the error 'Your Iphone could not be activated because the activation server cannot be reached. Try connecting to your Iphone to iTunes to activate it, or try again in a few minutes.
Where exactly did you get this phone?
Do you have a SIM in the phone?
There are 2 primary causes for this.
Either you don't have a SIM in the phone, which is REQUIRED to activate it, or the phone was hacked to unlock it. -
Post Author: sagimann
CA Forum: Deployment
Hello,
I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
My env is:
Solaris 10 64 bit
Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
Important bouser env:
ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
TNS_ADMIN=$ORACLE_HOME/network/admin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
I reboot the box, then start BO like so:
cd /opt/reporting/bobje
. setup/env.sh
./mysqlstartup.sh
./startservers
./tomcatstartup
Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
Error:
Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
May 5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
pls advise,
thank you.The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
The explanation, from a comment in the above linked blog post:
"To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
Edited by: abirdman on Feb 3, 2012 9:49 PM -
All of a sudden Safari on my MacBook Air won't let me do anything. I have a Mac OS X Version 10.7.5.
As soon as I open Safari, a message comes up straight away saying 'Appliance Error (configuration error) Your request could not be processed because of a configuration error: account is disabled'.
I also can't check for system updates because of a 'network error' and can't connect to the App Store.
My internet is working fine and safari is working fine on both my iPhone and iPad.
I've never seen this message before and I'm not having much luck in searching for an answer.
This may be a silly question, I don't know, but does anyone have a solution?Back up all data.
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens. -
Hi, anyone can help me? I can't activated my ip4 after restored n updated and it's showed activation server is temporarily unavailable and the device can't read my SIM card,can someone please help me....thanks
It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.
-
While trying to activate iphone 3gs get an error message saying " your iphone could not be activated because the activation server is temporarily unavailable" when will they be available, and is anyone else having this problem?
yes i am! did u get it fixed?
-
Please help with this error: "Your request could not be completed because of a disk error"
So photoshop cs6 was working fine a few weeks ago. After not using it for about 2 weeks, I try opening a RAW file and I get this error every time. JPGs open and work fine. I have extensively searched on the internet for solutions and have tried everything such as: disk checking, deframgenting, playing around with photoshop preferences, deleting temp files, resetting preferences, clearing disk space. I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free. I am getting very frustrated. Please help!
mistahbo1 wrote:
…I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free. I am getting very frustrated. Please help!
That's woefully inadequate for scratch file space.
The rule of thumb I follow says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open. I have seen the scratch file exceed 300 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
Additionally, if either one those two drives you mention with "16 GB free and the other with 8 GB free" happened to be your boot drive, you'd be in a heap of trouble because neither one of those drives has nearly enough space to accommodate the swap files of the OS and Photoshop's scratch.
As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS. I have 16 GB of RAM installed: -
i need support to activate my iphone 3gs upgraded
Generally a sign that either the iPhone is jailbroken or the computer
you are using to activate the iPhone has been used to jailbreak an iPhone.
Is either of these the case? -
i am not able to active my ipone 3gs after upgrat to ios5.1.1. it show error message " your iphone could not be activted because the activation server is temperarily unavailable.try connecting you iphone to itunes to activate it, or try again in a couple of munutes" i retry many time, could not sold problem.
You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one. -
HT201210 iPhone could not be update because firmware is not compatible? Any help?
Hi! It's been months I'm trying to do the update on my iPhone 4 and it at the end gives me message:
'Your iPhone could not be update because firmware is not compatible'
I hve no clue what it means
Any help?
thanksJust done the iTunes update and tried to update the phone again. No changed. The same MSG appear :(
-
HT1386 iphone could not be synced because the sync session failed to start
I'm using iOS X version 10.8.1 and iTunes version 10.6.3 and iPhone version 5.1.1
I get the following error message: iphone could not be synced because the sync session failed to start
One post said to delete previous backups which did not resolve the issue.
One post said to re-install which, also, did not resolve the issue.
Any help would be greatly appreciated.Try using a different USB cable. If you're using a desktop, make sure you're plugging the USB into the back of the computer, not the front
-
my iphone states Your iphone could not be activated because the activation server is temporarily unavailable - i cant get passed this screen to complete any of the resolutions i am being told to complete?
You can not "take an iPhone" to get it legitimately unlocked. ONLY the carrier it is locked to can authorize unlocking it, whch is done through iTunes by you.
Whoever you took it to hacked it. It is now most likely permanently bricked.
Buy a new phone. -
Im trying to setup my phone and I Keep getting this error.
"Your iPhone could not be activated because the activation server cannot be reached. Try Connecting your iPhone to iTunes to activate it, or try again later.Are you running one of the beta versions of iOS 7?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider? -
I am having problems activating my daughter's iphone. It says " Your iphone could not be activated because the activation server is temporarily unavailable". It went on like this for several days already. She was trying to upgrade her IOS to IOS6. Help anyone?
yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries -
I am trying to update my Iphone 3 and when i get to the activation step after a few minutes it shows a message that says " Your iPhone could not be activated because the activation server is temporarily unavailable. Try conenecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
If the problem persist, contact apple support at apple.com/support
I been trying for a few times now and I keep getting the same message. How can i fix it? now my phone doesnt work.These are the steps mentioned in the article iPhone: Troubleshooting activation issues
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
Maybe you are looking for
-
How to create new playlist. File option greyed out
The create playlist option is greyed out in the File menu. How do I create I new playlist? What is wrong with the new version?
-
i know nothing about this, but i'm looking for a gift for a friend who makes movies(not super professionally), but for work, he uses strictly final cut pro. My question is does adobe after effects, combustion, or fxhome's vision lab offer anything mo
-
We are running Exchange 2007 SP3 RU15 and IE11 -17501 We have a user that when viewing / making an appointment using OWA the attendees' free/busy information appears on top of hers. For example the user creates a meeting and her free busy is listed n
-
TS4002 I am having getting my hotmail messages on Apple Mail
Just got a Mac and use other mobile Apple devices. My iPad and iPhone are easily synching my email accounts (gmail and hotmail). I am having trouble getting my hotmail on my iMac. I have set up system preferences with both of my accounts. Gmail i
-
Vector Mask - Arrgh! (Bug or Feature?)
I'm frustrated by some behaviors of Vector Masks. I'm asking the forum about this because I'm curious how many others have experienced these issues • When I'm working on a layer that has a VM, (i.e. when that layer is active), it is IMPOSSIBLE to loa