2nd Gen Nano: Charges on Firewire, but not on USB.  Any clues?

2nd Gen Blue iPod Nano will charge on a Firewire connection, but not on a USB connection.
Thus...when connecting this Windows Format iPod to my PowerPC G4 through a USB cord, it won't charge OR interact with iTunes in any way.
Since it's a factory settings iPod,
it is well charged with zero content
I've reset the iPod (Center + Menu for 6 seconds) several times...it rebuilds, restarts, but is "still blind" to the USB connection (ie, won't charge; won't connect to iTunes).
I've also tried 4 different USB cords (which work fine with other iPods) with my "still blind" Nano, but....no go!
Any ideas?
Thanks.

Hmmm....Tried this; no go.
When plugging the USB 2.0 cord into a USB port, the iPod screen lights up, but the charging icon does not come on; and iTunes does not "see" the iPod. The iPod eventually sleeps. Changing ports (with nothing else plugged in other than power) wakes up the iPod, the screen LCD comes on, times out and goes off....and then the iPod sleeps. (Again...when I plug this iPod into a Firewire cord, the charging icon comes on and the iPod actually recharges. Its the only way to keep the iPod charged while I keep testing it).
Hmmmm....

Similar Messages

  • 2nd gen nano charging, not recognized by PC

    I've had an old 2nd gen nano for years, it's always worked great.  Now neither of my two computers will recognize it (via USB), either on iTunes or My Computer or in Device Manager.  The iPod charges and will even play music as if it were plugged into a car or wall outlet rather than a computer, but it won't sync to iTunes.
    I've tried:
    -resetting it (several times)
    -downloading the newest iTunes software
    -putting the iPod in disk mode
    -using multiple USB cords and ports on two different computers
    -Apple troubleshooting assistant for 2nd gen nano (http://www.apple.com/support/ipod/five_rs/nano2gen/)
    I'd like to uninstall the iPod driver, but I don't know how since the iPod doesn't show up in Device Manager.
    I live over an hour away from the nearest Apple store, so I'm waiting to take it in for service as a last resort.  Any other suggestions would be greatly appreciated.

    Hi
    I had the same issue with my Late 2009 Mac mini running Mavericks and iTunes 12. When I connected my 2nd generation iPod shuffle it would blink amber once then do nothing. This seems to be a common problem with the iPod shuffle and newer versions of Mac OS X (10.6 and up) and iTunes albeit with somewhat varying symptoms but the same overall problem syncing the iPod with iTunes.
    The predominant go-to solution is to give the iPod more power by either connecting the iPod directly to a USB port on the Mac or by disconnecting all other USB devices. On paper this makes sense.
    What worked for me, however, was the opposite. After trying to solve this problem for hours (weeks, months), I had success ONLY after adding a low-powered 4-port USB hub to the chain between the iPod and the Mac. I suspect this had the effect of throttling the power supplied to the iPod from the Mac. I was able to perform a restore on the iPod then sync my music over.
    I can't tell you much about the USB hub except that it is running at USB 1.1 speeds (12 Mb/sec). In theory a USB 1.1 extension cable should also do the trick. You might even be able to use the USB hub in old wired Apple USB keyboard. I will attach a photo of the hub I used to this post for greater clarity.
    I really hope this helps.

  • 5th Gen iPod and 2nd gen Nano will connect to Mac, not found by iTunes

    I bought a brand new MacBook running OSX 10.4.9, and I cannot get my 5th gen iPod video nor my 2nd gen Nano to be recognized by iTunes. The computer recognizes that there are two drives-- they come up on the desktop. But iTunes will not notice them, let alone play music from them. These iPods are mostly used with Windows 2000 PC laptops, and I'm connecting them via USB.
    What should I do?
    Thanks,
    Robert

    see if this helps
    http://docs.info.apple.com/article.html?artnum=61937

  • 2nd Gen nano charges but won't sync

    Hi - we've got a otherwise well-behaved 2nd Gen iPod nano (model number A1199) that now won't sync - but will charge up - when plugged into a mac. I noticed that there was a fair bit of crud at one end of the nano's 30-pin socket (wife + handbag + nano = crud in socket) which I've attempted to blow/brush out, but no change.
    Q1. Is it likely that the contacts are irrevocably gunged up/damaged by exposure to handbag-crud?
    Q2. Any experience or tips out there regarding successful cleaning out of a 30-pin socket?
    Thanks.
    Martin

    Did you try syncing with the cable plugged directly into the phone (without the dock)? I find the dock completely unnecessary and just charge/sync with the cable only and my phone flat on the desk beside me. At least if it works that way you know the dock is the culprit.
    Good luck!
    -SB

  • 2nd gen shuffle seen by windows, but not by itunes on other computers

    Hi Everyone..
    Im trying to help a friend out, I suspect his 2nd gen shuffle is hosed, but thought I'd confirm with others.
    He's had itunes and this shuffle for a while.. worked ok.  Stored it for a year or so, and now found that when we plug it into his laptop, Windows XP will see it as a usb drive (and I can transfer files onto it as a flash drive), but itunes doesnt see it.
    In mucking around with it for some time, I finally installed a fresh copy of Itunes over the existing one and when it restarted I was told the shuffle was in Recovery mode.. so I reset it from within itunes.  Upon restarting, itunes again doesnt see it.  I then downloaded the reset utility and tried that, again, doesnt see it.
    I installed itunes on my win7 desktop, my wifes 1st gen ipod touch is seen a-ok, but my friends shuffle is not.. again, I can use it as a flash drive on the win7 computer, but itunes does nothing.
    Is the shuffle toast?
    thanks,
    cakes..

    Not looking good if you ask me especially since the problem was persistent across two different PCs and the reset utility did not help.
    B-rock

  • 2nd Gen Shuffles charge with power adapter, not seen at all by computer

    I have three Gen 2 Shuffles (mine and kids), and am having same problem with all three.
    If I plug them into either of our home computers - an iMac and a brand  new Macbook Pro - they don't even seem to be recognized at all by the computer as even being plugged in, nor will they charge. The orange light flashes on for a split second when I plug in the USB cord, then goes out.  Nothing else happens.  I have two USB cords - same with both.
    If I plug the same USB cords into the power adapter and plug into the wall outlet - all three iPods charge, with either cord.  So the cords seem to be working fine.
    If I plug the USB cord into my work PC - a Dell that doesnt' even have iTunes on it -- the computer recognizes the iPod as a disk.  I've done this many times for many years to charge it at work if it was low, with no problems.  And I haven't plugged the kids' into my work computer.
    I am pulling my hair out here. I've read about others with a similar problem -- but in those cases at least the iPod seemed to be communicating with the mac, but not showing up in iTunes.  In my case, I can't even get anything to happen!!
    Would really appreciate any advice.
    Intel Core 2 Duo iMac with 10.5.8, and Macbook Pro bought last week with OS-X Lion.

    Nobody has any ideas?

  • 6th gen nano appears on desktop but not in itunes

    6th gen nano appears on desktop when I plug it in, but not in itunes.  I've never set my ipod to disk mode.  It never did this before, why all of a sudden? Having the same problem when I plug my girlfriends nano into my computer too.  Any advice?  Both my OS and iTunes are at the most up to date versions.
    Thanks, Matt

    Thanks for the response... that still didn't work for me but this latest iTunes update seems to have fixed the problem!

  • The music on my ipod touch (2nd gen) is showing on itunes, but not on my ipod.

    I plugged my ipod touch (2nd gen) into my computer to charge it over night. When I woke up and disconnected it, there was only three songs on it. I then plugged it back in and it said that all 1700 were there. I dont know what to do, PLEASE HELP!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • IPod Nano 2nd Gen showing up in Finder, but not in iTunes.

    I've done all the troubleshooting @: https://www.apple.com/ca/support/ipodnano/assistant/itunes/

    Have the same issue but with latest iPod nano 7 Gen, second day trying

  • 6th gen nano recognized in Windows but not iTunes - I've tried the support tips, nothing has helped.

    Why is this not an easy fix???  Very frustrated.   Thanks.

    It looks like a lot of questions get asked here - but none get answered...  I am BEYOND frustrated at this point.  What do you have to do to get some help around here??????????

  • IPod charges with firewire but sporadic with USB

    I haven't had problems charging wiith the Apple firewire charger with my 20G 4G iPod. But, when I bought a USB car charger and AC adapter, it seems the iPod only charges when it feels like it which is sporadic, no pattern. If fact, when it's not acting like it's charging, the battery seems to drain. I can't figure this one out and I haven't been able to find a post with a similar issue. Does anyone know what's going on? Thanks.

    I wanted to get rid of this one since nobody answered. I think the 3G is simply broken. It works fine via firewire, and now I use it as a stationary music server -- the battery was too old for regular use. I bought a 5G.

  • My flashdrive only works on one of the usb port.  the other usb works with my iphone charger, but not my usb. any suggestions? should i take it in? its a brand new laptop.

    My flashdrive only works on one of the usb port.  it will not work on the other usb port. however, the other usb works with my iphone charger.
    any suggestions? should i take it in? its a brand new laptop.

    Reset the SMC and PRAM
    SMC Reset:
    Shut down the MacBook Pro.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    PRAM:
    Shut down the MacBook Pro.
    Locate the following keys on the keyboard: Command, Option, P, and R.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • IPod mounts via Firewire, but not via USB

    My wife's iPod used to mount just fine via the USB connector on her PC.
    Now it doesn't mount at all via USB. I have tried two different cables.
    It DOES mount via my own Firewire cable.
    I have updated the iPod mini software to the latest, and the iTunes to the latest.
    Any ideas why USB no longer works?
    Thanks

    I wanted to get rid of this one since nobody answered. I think the 3G is simply broken. It works fine via firewire, and now I use it as a stationary music server -- the battery was too old for regular use. I bought a 5G.

  • Have had the descending shadow on my iMac and been told to restart but not sure why, any clues would be helpful thanks

    Had a warning siren tonight on iMac, restarted, seemed ok until a shadowy curtain crept down my screen and I was told to restart again, and again. No clue as to why this has happened, any help would be gratefully received.

    What is a Kernel Panic?
    http://support.apple.com/kb/TS3742
    and  http://support.apple.com/kb/TS1892?viewlocale=en_US
    http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
    More details here:
    http://www.thexlab.com/faqs/kernelpanics.html
    Useful articles on how to avoid and eliminate kernel panics here:
    http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
    http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp

  • Itunes says "syncing" but ipod does not.  2nd gen nano

    My wife has a 2nd gen nano that will not sync. Itunes says "syncing" but ipod does not, you can scroll through the menus and use it like it was not connected. When I first connect it, the do not disconnect sign appears then after a few seconds the main menu. She has used it for 2 years and it worked fine until today.

    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod

Maybe you are looking for

  • Fields on Email screen are GRAYED out in CRM webClient UI

    Hi CRM folks , I have a issue with email in the CRM IC webclient UI . The fileds on the Email section in WEB UI - CIC - CRM 7.0 are graye  . I am  not able to add any text / value in any of the field on the EMAIL screen. all buttons like - send , to

  • UCCE 7.5 DBLookup Configuration

    We have a UCCE 7.5(9) implementation and I have been requested to implement a db lookup to determine if a caller should hear custom messaging while waiting in queue based on their account info.  Basically I have to check an account listing and if the

  • Field recovery in the  account's advanced search

    Hi all, i am working with badi CRM_ACC_SEARCH and i need to recover the value entered in  field 'last name' , talking about the advanced search of accounts (field group ACC_SEARCH_07, structure CRMT_BSP_SEAREQ_ACCOUNT, model access CL_BSP_ACC_ACCMOD)

  • Create new article:  BAPI_MATERIAL_MAINTAINDATA_RT

    Hi all, When i try to create a new article by using BAPI_MATERIAL_MAINTAINDATA_RT i am getting the follow success message M3801 ("Material & changed") but article is not created. After sending the BAPI_MATERIAL_MAINTAINDATA_RT and returning without a

  • Fully Connected to AirPort Extreme, But With No Internet (PLEASE HELP!)

    I have spent my Labor Day trying to figure out what is wrong with my wireless connection to no avail. I am entirely frustrated and would appreciate any helpful advice that can be offered. Here's the deal: Yesterday afternoon, the two computers on my