UCCE 7.5 DBLookup Configuration

We have a UCCE 7.5(9) implementation and I have been requested to implement a db lookup to determine if a caller should hear custom messaging while waiting in queue based on their account info. Basically I have to check an account listing and if the caller is part of an account that is in a certain group, play some custom messaging in between the standard queue messaging and if not, just do the normal queue messaging. I was planning to use the DBLookup to execute a stored procedure in my remote SQL 2008 DB to set a user variable which would be checked during the queue script. However, I'm having some trouble finding some configuration details and have a couple of questions:
Is DBLookup the right way to check ANI against an external DB? My table has over 1.5 million records currently and my concern would be over making sure the data in the DBLookup is filtered on the remote end, and not on the UCCE end.
Can DBLookup be configured to point to a stored procedure that takes an input variable? If not, what about a custom view? The check I need to run relies on data from several different tables.
Is there a better method of doing this? I have seen several posts here suggesting that DBLookup is not very good for checking ANI or for checking large tables and other alternatives (such as application gateways) may be required, but am not sure. I tried finding details about setting up an application gateway, but have not been successful so far.
Any help/advice is much appreciated.
Thanks,
John

Hi John,
You can use DBLookup for remote SQL or ICM application gateway with ODBC gateway host store procedures.
With all new deployments where customer have that kind of requirments Cisco recommends to use Cisco CVP VXML applicatoins. All depends on your BHCA and CRM responce. I would suggest you to engage local Cisco SE or AM for best recommendation based on your design and integrations.
Thanks,
MAR

Similar Messages

Sip dialer port export option grayed out in configuration manager ucce 10

Hi,
I am configuring the outbound option for ucce 10, when i configure the sip dialer port (dialer conifguration) in conifiguration manager, i just added 5 ports, i can see this ports showing in dialer process on the PG, but i need to export this ports to Unified communication manager, i could not able to export it because this option grayed out (i did select all, or individual selection both are having export option grayed out)
Any idea?
with Regards,
Manivannan

Exporting port configuration is only allowed for SCCP, in SIP Dialer Deployment its actually not needed and that why its grayed out.
//but i need to export this ports to Unified communication manager//
in Sip Dialer you don't need to create any Port For Dialer under CUCM. its only required in SCCP.
Sip Dialer port Directly registers with VG.
regards
Chintan
~please rate if helpful

Cisco CIM adapter integration for HTML link

Hi,
We have 9.0 ucce and Cim 9.0 sytem in an integrated scenario.
We have a query where a EIM system will get the agent id from a external/ third party (like a rest api or a html page) .Based on the agent id the mail should route to the prefered agent in UCCE.
We have configured the Data and the usage links in adapters but doesnt know how will the agent id will be captured in EIM and how can it be sent to UCCE.
Can any one comment on this.

CIM flow for sticky agent - When a NEW_TASK is created by CIM, it adds the agent id ( If sticky agent is enabled, for EIM9 please go through below link page 73. http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/cisco_interaction_manager/cim_901/maintenance/cisco_im901_cce_userguide_administration.pdf
) in preferred agent tag in new_task request and is sent to ICM. ICM script will read the data from preferred agent value and assign the activity to that agent.
In your case you will have to validate if the value fetched by adapter is = to the value logged in agent and avaliable and set that Id in preferred agent in NT.
You can follow below link to contact our PS in case you need more help.
http://www.egain.com/resellers/contact_ps.asp

DBLookup with UCCE 7.5 & SQL 2005

Does anyone know if the DBLookup to a SQL2005 database is now supported on UCCE 7.5? This wasn't previously supported in earlier UCCE versions although there was a workaround, albeit unsupported. I can find zero documentation on this compatability in the 7.5 docs online.

BTW, here is the doc from Cisco regarding the compatability with SQL 2005. It specifically notes that this was only tested on ICM 8.0 and higher. Now I wonder if they would have been referring to the original 8.0 which ended up as 7.5. If that's the case, no worries but would still like to see something confirming this fact.
https://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a00808cf91a.shtml

Can't start Configuration Manager in UCCE 9.02

I can't start the Configuration Manager. The attach file is the error that shown during I started the Configuration Manager. But Script Editor Tool is working fine. I've checked all connectivity and DNS is work fine.
OS: MS 2008 STD. R2 SP1
SQL: MS SQL 2008 ENT. R2 SP1
UCCE: UCCE version 9.02
Deployment model: ROGGER A + B and AWHDSDDS A + B
All Server sync to NTP Server

I encountered the phenomenon which resembled this by UCCE8.5.
The problem was in DB.
What bad data was interfering with was a reason.
It turns out that the log of UpdateAW is seen.

Can I configure a 79xx Phone with two busy trigger using UCCE 8.5?

Hi, my name is Eric and I've some doubts to configure my Phones. First of all, I will explain my environment below:
- UCCE 8.5
- CM 8.5
- CVP 8.0
I would like to know if it's supported if I configure a 79xx Phone with 2 busy triggers configuration, because the customer would like to the agent's phone receive two calls per line.
Thank you very much.

Eric,
No, this is not supported and stated as such in cisco docs.
Customer will need to designate separate DN for ACD calls and separate DN for DID/personal calls.
HTH,
Chris

Can MRPG be configured in UCCE

Can MRPG be configured in UCCE? If yes, can you let me know the configuration steps and the interface that will be used between UCCE and MRPG

Hi Jennifer,
check page 93 of the deployment guide of IPCC.
below is the link for your quick ref.
IPCC Deployment Guide.
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&ved=0CDgQFjAD&url=http%3A%2F%2Fwww.cisco.com%2Fen%2FUS%2Fdocs%2Fvoice_ip_comm%2Fcust_contact%2Fcontact_center%2Fcisco_interaction_manager%2Fcim_432%2Fuser%2Fguide%2Fcisco_im432deploymentguide.pdf&ei=egsnUtOnEMq6lQXv74GwAw&usg=AFQjCNHrkmgc3UBZgxO6q1BHbJ0grpV4tg&bvm=bv.51495398,d.dGI
Regards
Sandeep

UCCE - Configuration Limits Tool

Hi All,
Recently, we have been asked by TAC to use a tool named "UCCE - Configuration Limits Tool" to check system configuration are under the SRND suggested limits. Attached snippet for reference.
Looks like, this utility is referring AWDB to pull and display the information.
However I am interested to know more the about this application. Is there any document which talks about it ?
Can someone please help to bring SQL query's which are using in this application for following inferences.
- Teams per Supervisor
- SkillGroups Per Supervisor
- SkillGroups Per Agent
- Agents Per Team
- Agents Per Supervisor
Thanks,
JP

Hi All,
Recently, we have been asked by TAC to use a tool named "UCCE - Configuration Limits Tool" to check system configuration are under the SRND suggested limits. Attached snippet for reference.
Looks like, this utility is referring AWDB to pull and display the information.
However I am interested to know more the about this application. Is there any document which talks about it ?
Can someone please help to bring SQL query's which are using in this application for following inferences.
- Teams per Supervisor
- SkillGroups Per Supervisor
- SkillGroups Per Agent
- Agents Per Team
- Agents Per Supervisor
Thanks,
JP

Configuring a new hotline to UCCE

Good day. I am working on a new campaign and would like to seek your opinions on how to configure a
trunkline to UCCE. For example number to be configured is 6322588. Any suggestion will be highly appreciated.
Nortel PABX -----E1------UCCE

No problem. I am just new with UCCE and trying to understand it better. Here is the thing
this is a new campaign...new created trunkline 632XXXX needs to be connected to UCCE afterwards
this needs to be connected to a script. I trying to understand the notes I got from the previous admin and
I am having trouble to understand how to connect the trunkline to UCCE...I apologize for the confusion
better yet any advise will be highly appreciated.

Configuration of Auto-growth in UCCE 9.X

Hi All - Is there any best partices to set auto-growth for AWDB, HDS and Logger and BADialer Instance for SQL for both Data and Log.
I can see below re-commendation for Tempdb , Is there any best partices for above metioned Instance.
For Data Files:
Set the Space Allocated to 1400 MB.
Set Automatically grow files.
Set Unrestricted file growth.
For Transaction Log Files:
◦ Set the Space Allocated to 400 MB.
◦ Set Automatically grow files.
◦ Set Unrestricted file growth.
◦ In the Options tab, ensure the following options are set to False: ANSI NULL, Recursive triggers,
Auto close, Auto shrink and Use quoted identifiers.
SIVANESAN R

Hi David - I got to know below info.
Please check the defect Id "CSCuj48150 " on page 18 of the below link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ippcenterprise10_0_1/release/UCCE_BK_R8A8633B_00_release-notes-for-ucce-transformed.pdf
On clicking the above defect ID, it will take you to the Bug Toolkit,
https://tools.cisco.com/bugsearch/bug/CSCuj48150
Symptom:
The HDS, AW and Outbound databases do not have the proper autogrowth settings.
Conditions:
Autogrowth is set to 10% for data instead of 100MB and 100MB instead of 10% for logs on the AW HDS and Outbound databases.
Workaround:
Change the values for autogrowth on the HDS, Outbound and AW databases manually.
The steps are:
Select Start > All Programs > Microsoft SQL Server > SQL Server Management Studio. Click Databases > System Databases.
Right-click the database.
1 For Side A, select the _ awdb database and the _sideA database. If you have enabled Outbound option, select _baA database.
2 For Side B, select the _ awdb and the _sideB database.
3 For any external AW-HDS-DDS systems, select awdb and _hds database.
For each database, select Properties. For each file:
a) For the date file, set In Megabytes to 100.
b) Forthelogfile,setInPercentto10.
Click OK.
SIVANESAN R

UCCE 8.5.3/8.5.4 call volume statistics not matching in interval tables

hello,
We have just migrated a call center to UCCE 8.5.3 that runs roggers and ICM call flow scripts that contain very basic flows. In each flow there is basically a one-to-one ratio of call type elements to select skill group elements.
Generally you would expect the call volume (as our scripts are written) to have almost the same call volume in the call type interval table and the skill group interval table, with allowable differences because of RONAs, etc. But basically somewhat close.
In general this does work but after a reboot of the roggers (A and B sides) (logger down first, then router and reversed to start), the skill group interval data lags greatly from the call type interval data, meaning maybe 10% of the call type interval volume. We have learned that completely shutting down both A and B side and then briinging it back up in order from scratch seems to alleviate the problem (until the next restart). We cannot just leave the servers alone though due to company security patching policies.
Cisco TAC had recommended patching to UCCE 8.5.4 which we have recently done, but the probelm persists.
I was wondering if this data discrepancy has ever been seen by anyone else or if possibly some system config issue might be self-deating us? Rebooting the roggers leaves the phone system itself working just fine for the call centers, but the recording of statistics to the skill group interval table is greatly impacted with almost no recording of volume in relation to the call type interval (and for comparison, the call type skill group interval table as well).
We would generally not worry about it, but the workforce management vendor that takes its feed from UCCE only uses the skill group interval, which is basically reporting almost no volume in the mentioned scenarios.
If anyone can provide any information it would be most appreciated/
Thanks.
Greg

Thank you for the response. The time source check is a great idea. We ran into problems before when internal web service servers did not match the PGs (CTIOS service) and CTI provideed stats did not match.
We will continue to work through TAC, but I was just wondering if anyone else had seen this (as 8.5.4 sid not fix it) and if maybe it could have been something self-defeating in our system configuration or scripting. We did not immediately know this was happening until our 3rd party workforce management vendor made us aware.
Thanks,
Greg

"Error [10151] The LCP Port on CCM Admin for Mobile Agent is not Configured or misconfigured"

We are running into a problem which we have noticed on UCCE 8.5 and havent seen on earlier 7.5 release.
If we setup a CTI port as agent device target and if we try to login the agent using Cisco Desktop (Not CAD, just CTI OS Client) then we get following error:
"Error [10151] The LCP Port on CCM Admin for Mobile Agent is not Configured or misconfigured"
But this wasnt the issue with 7.5 and we were able to do agent login with CTI Port as device target. We dont intend to use Mobile Agent feature but just login UCCE agent to CTI port as the device.
Do we know if this is a known issue or if something has changed between 7.x and 8.x release which could be is causing this?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Set Password Policy For System Administrator Account in UCCE Servers

Hi All,
We want to setup a password policy ( expires in 30 days) for the local administrator account in all our UCCE servers.
We found that the all the UCCE services are running in local system account except logger and distributor( these services are running in domain user account).
Is it a supported configuration ? Are there any impacts with this setting ?
Thanks a lot in advance!
Thanks and Regards,
Thammaya

Hi,
what is the UCCE (~ ICM) version? Is there OS hardening applied?
By the way, yes, if you mean the local "administrator" account, you can do whatever you want to do with it, provided you don't lock yourself out - this should not happen, naturally, having all ICM servers in the domain and you can always use the domain admin (or a user belonging to the domain admins group).
By the way, I don't really see the meaning of having a local administrator account being enabled. :-)
G.

UCCE 7.5 Silent Monitoring for only primary supervisor

Hi all,
We currently activate Silent Monitoring for our UCCE platform 7.5 using BIB and CCM based deployment.
I'd like to enable the feature for only the team primary supervisor. Meaning the same supervisor, if configured as secondary for a different team, can not monitor calls of members from that team.
Can someone please give me a hint?
Thank in advance,
Best Regards,

If it was CTIOS you could remove the button, recompile and deploy that Supervisor Desktop. But I guess you have CAD.
If it was the Cisco Agent Desktop you could create a workflow, remove a button (make it invisible), and assign this workflow to agents who did not require the function.
Not sure about CSD. I know you can remove buttons for everyone (we removed the one for Dynamic Reskilling) but I can't recall if you get the ability to do more.
Regards,
Goeff

UCCE 7.5 to 8.5 Common Ground upgrade with uncommon hardware.

All,
So, I have a client that is running UCCE 7.5, and they are looking to do an in place upgrade to 8.5. Most of their hardware is pretty standard, except for the PGs. There is a mix of virtual and physical servers, with drive configurations that are nowhere near a standard. The physical servers have drive configurations that are 40 gig for the OS drive, and 97 gig for the application drive. The virtual servers are a 20 gig OS drive, 50 gig application drive,
Looking through the 8.5 BOM, the requirements seem to be either 4x72 or 4x146 for the drives. I'm sure that some voodoo can be used to bring the VMs into compliance, but what about the physical servers? Is there any issue running 8.5 with these drive configurations?
The client getting ready to go to 9.1 fairly quickly after the 8.5 upgrade, and is planning a tech refresh for that project, hence the desire to use the in place hardware until the new environment is up and going.

Ok, so 8.5 won't care about your drive configuration, but TAC might. However, since you already have 7.5 running like that I can't imagine you having any additional problems. Caveat emptor, the customer is not running a standard install and make sure they understand this and it's documented.
david

UCCE 7.5 DBLookup Configuration

Similar Messages

Maybe you are looking for