3.0 upgrade failure with Error 1604

Just tried to make the upgrade - downloaded, backed-up, etc. Got as far as the RESTORE finalisation and eventually was told "cannnot restore - unknown error 1604".
Now my iPhone doesn't work - it just shows a black screen with white USB cable plus an image of iTunes. Tried reset (Home + Sleep button pressing), but that doesn't do anything.
I've re-attached the iPhone, followed the RESTORE instructions in iTunes, but always the same error comes back eventually - "cannnot restore - unknown error 1604".
I've tried re-installing iTunes, Apple Mobile Device, etc. but no it makes no difference.
Below is my last Updater log report. *Can anyone please help?*
2009-06-18 17:29:48.937 iTunes.exe[412:ea4]: restore library built May 29 2009 13:21:47
2009-06-18 17:29:48.937 iTunes.exe[412:ea4]: iTunes: iTunes 8.2.0.23
2009-06-18 17:29:48.937 iTunes.exe[412:ea4]: iTunes: Software payload version: 7A341
2009-06-18 17:29:49.406 iTunes.exe[412:9b0]: iTunes: Specifying UOI boot image
2009-06-18 17:29:49.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:49.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:49.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:49.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:50.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:50.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:50.906 iTunes.exe[412:9b0]: USBControlTransfer: error 0, usbd status c0000004
2009-06-18 17:29:50.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:50.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:51.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:51.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:51.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:51.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:52.406 iTunes.exe[412:9b0]: USBControlTransfer: error 0, usbd status c0000004
2009-06-18 17:29:52.406 iTunes.exe[412:9b0]: iBoot build-version =
2009-06-18 17:29:52.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:52.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:52.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:52.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:53.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:53.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:53.906 iTunes.exe[412:9b0]: USBControlTransfer: error 0, usbd status c0000004
2009-06-18 17:29:53.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:53.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:54.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:54.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:54.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:54.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:55.406 iTunes.exe[412:9b0]: USBControlTransfer: error 0, usbd status c0000004
2009-06-18 17:29:55.406 iTunes.exe[412:9b0]: iBoot build-style =
2009-06-18 17:29:55.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:55.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:55.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:55.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:56.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:56.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:56.906 iTunes.exe[412:9b0]: USBControlTransfer: error 0, usbd status c0000004
2009-06-18 17:29:56.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:56.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:57.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:57.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:57.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:57.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:58.406 iTunes.exe[412:9b0]: USBControlTransfer: error 0, usbd status c0000004
2009-06-18 17:29:58.406 iTunes.exe[412:9b0]: radio-error not set
2009-06-18 17:29:58.421 iTunes.exe[412:9b0]: unable to open device_map.txt: No such file or directory
2009-06-18 17:29:58.421 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress -1
2009-06-18 17:29:58.578 iTunes.exe[412:9b0]: bootstrapping restore with iBEC
2009-06-18 17:29:58.578 iTunes.exe[412:9b0]: WinDFU::OpenDFUDevice: path: \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#a1994bc1
2009-06-18 17:29:58.578 iTunes.exe[412:9b0]: WinDFU::OpenDeviceByPath: \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#a1994bc1
2009-06-18 17:29:58.593 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 3
2009-06-18 17:29:58.593 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 7
2009-06-18 17:29:58.593 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 10
2009-06-18 17:29:58.593 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 14
2009-06-18 17:29:58.609 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 17
2009-06-18 17:29:58.609 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 21
2009-06-18 17:29:58.609 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 25
2009-06-18 17:29:58.609 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 28
2009-06-18 17:29:58.625 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 32
2009-06-18 17:29:58.625 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 35
2009-06-18 17:29:58.625 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 39
2009-06-18 17:29:58.625 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 43
2009-06-18 17:29:58.640 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 46
2009-06-18 17:29:58.640 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 50
2009-06-18 17:29:58.640 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 53
2009-06-18 17:29:58.640 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 57
2009-06-18 17:29:58.656 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 61
2009-06-18 17:29:58.656 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 64
2009-06-18 17:29:58.656 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 68
2009-06-18 17:29:58.656 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 71
2009-06-18 17:29:58.671 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 75
2009-06-18 17:29:58.671 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 79
2009-06-18 17:29:58.671 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 82
2009-06-18 17:29:58.671 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 86
2009-06-18 17:29:58.687 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 89
2009-06-18 17:29:58.687 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 93
2009-06-18 17:29:58.687 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 97
2009-06-18 17:29:58.687 iTunes.exe[412:9b0]: WinDFU::UploadData: EOF, cbRead: 3392
2009-06-18 17:29:58.687 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 100
2009-06-18 17:29:58.687 iTunes.exe[412:9b0]: WinDFU::UploadData: ZLP
2009-06-18 17:29:58.703 iTunes.exe[412:9b0]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
2009-06-18 17:29:58.703 iTunes.exe[412:9b0]: WinDFU::ProcessUpdateState: status.bState == DFUSTATE_MANIFESTSYNC
2009-06-18 17:29:58.703 iTunes.exe[412:9b0]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
2009-06-18 17:29:58.703 iTunes.exe[412:9b0]: WinDFU::ProcessUpdateState: status.bState == DFUSTATEMANIFEST, PollTimeout: 3000
2009-06-18 17:30:01.703 iTunes.exe[412:9b0]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
2009-06-18 17:30:01.703 iTunes.exe[412:9b0]: WinDFU::ProcessUpdateState: status.bState == DFUSTATE_MANIFEST_WAITRESET
2009-06-18 17:30:01.703 iTunes.exe[412:9b0]: WinDFU::ResetDevice: resetting...
2009-06-18 17:30:02.078 iTunes.exe[412:9b0]: WinDFU::FinalizeDfuUpdate: success
2009-06-18 17:30:02.078 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 31 progress -1
2009-06-18 17:30:03.078 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: Recovery mode succeeded
2009-06-18 17:35:10.625 iTunes.exe[412:ea4]: iTunes: Restore error 1604

Ok this has become totally ridiculous. I've spent the last 5 hours trying to fix my iphone all because I went to update to 3.0
I didn't do anything wrong, the files were all from apple and not corrupted.
I finally managed to restore via my laptop and yet when I try to get my settings back on my phone from what I have saved on my desktop, it breaks again and I have to start all over.
This is so ()&U)*(&@)*(&@()@ stupid!!!!
So the last few months of customizing and backing up my iphone is all lost due to some bullsh*t that apple screwed up?
I guess I should have gotten a Zune.
Anyways, this thread is barely useful... I wish you guys would clarify a little bit.
Like what vette asked in reference to Kleckerei's second post... *** is the file name?
I'm so ****** off right now... months and months of saved contacts, notes, games, apps, etc... GONE and I backed up EVERY **** TIME I plugged in my iphone.
This is the ultimate failure in the entire history of phone manufacturers.

Similar Messages

SharePoint 2013 site collection 'upgrade completed with errors'

Hi All,
I am in process to upgrade SharePoint 2010 to SharePoint 2013 with all steps as mentioned in TechNet.
I was able to get all the SP2010 UI in SP2013 environment. However, when I navigated to top level site and clicked on “Site
Collection health checks”. In SP2010 environment I never used (as Farm Admin) any Video content type. It belongs
to out-of-the-box "digital asset content types" and cannot be deleted.
Therefore I changed the name of Video to our department name like "Video - Company" and ran the site collection health check again. This time there was no conflict for content types.
After ran the site collection upgrade I got following error.
-------------------------------------------START------------------------------------------
05/05/2014 14:34:28.66 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPFeatureDefinition aj2bj
ERROR Feature upgrade action 'AddContentTypeField' threw an exception upgrading Feature 'CTypes' (Id: 15/'695b6570-a48b-4a8e-8ea5-26ea7fc1d162') in Site 'http://sp13fe01-dev': Field type
Rating is not installed properly. Go to the list settings page to delete this field.
32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 14:34:53.04 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPSiteWssSequence2 ajy6m
ERROR Feature upgrade incomplete for Feature 'CTypes' (Id: 15/'695b6570-a48b-4a8e-8ea5-26ea7fc1d162') in Site 'http://sp13fe01-dev'. Exception: Field type Rating is not installed properly. Go to the list settings
page to delete this field. 32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 15:18:43.95 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPManager ajxoe
ERROR RunUpgradeSiteSession [SPSite Url=http://sp13fe01-dev] failed.
32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 15:18:44.16 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPManager ajxoe
ERROR Exception: Upgrade completed with errors. Review the upgrade log file located in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\SiteUpgrade-20140505-143330-61.log. The
number of errors and warnings is listed at the end of the upgrade log file.
32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 15:18:44.16 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPManager ajxoe
ERROR at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CheckPoint() at Microsoft.SharePoint.Upgrade.SPUpgradeSession.LogEnd() at Microsoft.SharePoint.Upgrade.SPManager.RunUpgradeSiteSessionCore(Object
lockObject, SPSite site, SPUpgradeOperationFlags upgradeOperationFlags, Boolean checkConcurrentSiteUpgradeSessi
32d48d9c-70d4-f09a-6073-526808f844be
-----------------------------------END-------------------------------------
Feature ID 695b6570-a48b-4a8e-8ea5-26ea7fc1d162 is Standard Content Type Definitions https://social.technet.microsoft.com/wiki/contents/articles/7695.sharepoint-2010-list-of-features-id-displayname-and-scopes.aspx.
Any expert to solve the issue??
Thank you.
regards,
Aroh Shukla

Hi All and Inderjeet,
Thanks for your reply and pointers.
I did follow the steps as mentioned in the links above. I used some third party solutions but not for any Video solution. I was able to successfully migrated the SP2010 (WSS_Content) to SP2013 (WSS_Content) environment a few weeks back with exactly same
third party solutions and no site collection error:
I renamed the default and out-of-the box video site content type as shown:
I ran the "Site Collection Health Check" and did not receive any error as in my second screenshot.
But, after upgrade the Site Collection Upgrade and got the same errors.
I don't know if there is any SharePoint Server 2013 patch gave this error as I keep run the Windows Server 2012 (not running R2) and SharePoint Server 2013 regularly.
Can suggest how to resolve this error?
Many Thanks!!
--Aaroh
Aroh Shukla
The same here. Opening a support ticket with MS.

Failed iPhone software update to 2.0, failed restore with error 1604

I downloaded the latest iTunes 7.7 and upon "Check for Update", I was notified that iPhone firmware 2.0 for the 2G iPhone was out. I downloaded the firmware, synced/backed up settings, and then rebooted. Then something went wrong...
I restarted iTunes and the iPhone, per Apple support suggestion, and iTunes found the iPhone connected, but displayed "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." I clicked OK, and then Restore. The restoration process began with an option to either cancel or "Restore and Update". Cancel is a worthless option, so I did "Restore and Update". Here it begins extracting the software and then prepares the iPhone for restore. The iPhone flickered, disconnected and reconnected to the computer, and then presumably continued the process until ending with the following error: "The iPhone "iPhone" could not be restored. An unknown error occurred (1604)." Nothing else happens.
I've tried everything, and am really at my wits end. I have installed/reinstalled iTunes several times. I have tried reinstalling drivers. I've tried rebooting the computer several times. I've tried disconnecting and reconnecting everything. I've been restoring this iPhone for a good 3 hours and nothing seems to work!
I am supposed to give this iPhone to my mother for her birthday tomorrow and now it won't even turn on. A brick makes a great birthday gift afterall...
Any ideas?

People who have still not solved error 1604 and had a bricked iPhone no matter what they tried, might manage to revive it by following these instructions (on how to downgrade from 2.0 to 1.1.4).
You will need the following:
- iTunes 7.5 (NOT 7.7)
- iPhone firmware iPhone1,11.1.4_4A102Restore.ipsw
Step 1:
Uninstall iTunes 7.7 completely if you have it and restart your computer.
Step 2:
Install iTunes 7.5
Step 3:
Your iPhone should be in 2 states, either stuck on the "Slide to make emergency calls" screen, or you tried to restore before and it's stuck on the new look "connect to iTunes" screen. Either way you're ok.
Enter the phone in DFU mode (You must have the iPhone connected to the computer and iTunes running). To do this, hold the power & the home button down for about 9 seconds.
Why 9s? Well people say 10s, but it depends how slow you are at counting. Too short and it doesn't work, too long and the apple logo appears.
When you hit about 6-7s the screen should turn off, leave it for 2 more seconds and release the power button, STILL holding the home button. If all went well, you should NOT see an apple logo, the screen should be dead.
Keep holding home until windows/Mac informs you that it's found new hardware, OR iTunes tells you that your iPhone is in recovery mode. Remember, screen should be blank.
If you see an apple logo, repeat the process for less time until you get it right. Took me a little time.
Step 4:
Shift/Option click the restore button in iTunes and select the iPhone1,1_1.1.4 firmware you downloaded.
Fingers crossed it should restore back to 1.1.4.

IOS 4.2 update failed with error 1604..

Heyy I updated my iphone 3GS with IOS 4.2.. But finally it gave me error message saying Update failed due to error 1604. I restored my phone but how to get rid of this issue..Any help is appreciated.

http://support.apple.com/kb/ts1275

RME 3.2 Inventory Collection Failure with error

Hi,
Inventory collection fails with error is "Timed out. Make sure that ICServer is runningâ. But the ICServer process is running. I enabled debug on could see the following in the IC_Server.log which I'm not sure if it indicates any issues.
I can find the devices in DCR and the devices are classified as Normal in RME.
Series of following message for all the devices
DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.Request,115,Removing device 181from request 1255347128972
DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,163,Removing, 175
DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,171,got device, 175
DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.Device,51,Removing request 1255347128972 for device 175
DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,177,Removed2 dev, 175from Priority of the ENUM is : 0
then,
DEBUG,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,89,Adding Device :175
DEBUG,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.Device,46,Adding request 1255347128973 for device 175
DEBUG,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,142,Found dup device in queue: 175
DEBUG,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.Request,75,Adding device 175 to request 1255347128973
and then the below messages
DEBUG,[Timer-0],com.cisco.nm.rmeng.inventory.ics.threadpool.ThreadPool,69, Timer Tasks Run method is called.
DEBUG,[Timer-0],com.cisco.nm.rmeng.inventory.ics.threadpool.ThreadPool,69, Timer Tasks Run method is called.
DEBUG,[Timer-0],com.cisco.nm.rmeng.inventory.ics.threadpool.ThreadPool,69, Timer Tasks Run method is called
I highly appreciate any help on this. Thanks

The ICServer process could have locked up which means a full thread dump will be required to see why this is happening. Open a TAC service request, and they can walk you through getting this.

Acrobat XI installation failure, with error codes

I've tried but failed to install Acrobat XI twice from Creative Cloud, but the program showed up as installed in Win8 control panel. I uninstalled and tried again, failed, but captured the error codes as follows (hope someone can help):
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}. HRESULT: 0x800736B3.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}. HRESULT: 0x800736B3.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

Okay, so I've looked at posts with similar issues and error codes and they all seem to point in somewhat different directions and tend to relate to earlier product and OS versions but then I decided to look for the installation files in C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat and found the Acrobat.exe file. It successfully launched the application, which appears to have installed properly (still testing that theory). The launch icons appear on the Win8 Start menu and the Control Panel\Programs\Programs and Features indicates the program has been installed. Apparently, the only issue remaining is that the CC App Manager shows the install as failed. Something failed, not sure what but it may have been the final hand-off of the process to CC App Manager. But I'm just guessing.

Upgrade issue with errors

I recently tried to upgrade my Ipad OS from version 4.3.5 to 5.0.1. I have the most recent version of iTunes, 10.5.2, and my PC is up-to-date with the Windows XP service pack 3. It began by backing up the content onto iTunes. After that it gave me a message saying that the update of the system would erase all data on my iPad. I figured I was covered as I just backed it up so I clicked ok. It began updating then after a while it can to a halt with an error message.
As of right now iTunes does not ackowledge the iPad. When I boot up the iPad all I get is the dreaded iTunes connector image. I am at an impasse here; for the live of me I can not figure out how to proceed. Any advice would be GREATLY appreciated! Thanks in advance.

Hi Markus
Thanks for your quick answer
Indeed I have checked this logs and I had only one entry for a table
But I don't undersdand why I have all the error regarding support packages (around 100)
And without a clear message to investigate further
Cheers
Yacine
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB62062.TST
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "8"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB62063.TST
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "8"

Datasocket failure with error 1184

I used to have 3 pcs making up a network. They were all running Windows 2000 and Labview 8.5.1 and I was able to use one machine to host a shared variable engine and have the others read and write shared variables to and from it. Now I have upgraded the pcs to Windows 7 and my old VIs no longer work. Even though the shared variable library appears to have deployed successfully I get Error 1184 ( Path not found, FTP login incorrect or no FTP write permission). Is this because of an incompatability between Labview 8.5.1 and Windows 7 or is it a problem with setting permissions in Windows 7. If the latter what do I need to set?
Thanks

don_h:
Technically, LabVIEW 8.5.1 isn't supported on Windows 7, which means that I can't guarantee that this will work at all (since there hasn't been any testing of 8.5.1 on that OS).
Since you seem to have the program itself running, we'll set that aside (I just want to be upfront about it).
The error itself sounds like it's either a network security issue with Windows 7, or some DataSocket configuration that isn't set up yet.
My guess is the latter. If you freshly reinstalled LabVIEW, then the DataSocket server may not be set up for multiple subscribers. There is more info on the issue in this KB here.
If that doesn't work, then you may need to check your firewall settings in Windows 7. I believe you can find the port numbers and further info in this other KB.
Hope that helps!
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support

Windows 10 upgrade fails with error message "we couldn't update the system reserved partition"

HP and Microsoft both indicated my notebook was ready for upgrade to Windows 10, but when I tried to do the upgrade it failed - repeatedly - with the error message from Microsoft that "we couldn't update the system reserved partition." What to do?

The system reserved partition serves a purpose. If it is deleted, then the OS will not boot back up. In which case you are toast.ON THIS PAGE, it tells what the partition is used for.-The Boot Manager and Boot Configuration Data : When your computer boots, the Windows Boot Manager starts up and reads the boot data from the Boot Configuration Data (BCD) Store. Your computer boots the boot loader off the System Reserved partition, and it boots Windows from your system drive. I advise that you not do what CanhThanh is instructing

Windows 10 Upgrade Failed with error code 80004005

OK, I have downloaded Windows 10 Upgrade and it all goes well until the computer restarts. Once it boots up again, the upgrade does not continue and I just go back to Windows 8.1. I then see error code # 80004005 for the upgrade in the Windows Update history. I do not know what is going on. I read on HP's Notebook upgrade page I found the following:For computers with available storage of 128 GB or less, the upgrade might require you to provide a USB hard drive (32 GB or larger). HP does not recommend using an SD card.If your computer has less than 128 GB of free hard drive space you will be prompted to connect a USB hard drive to continue with the installation. Use a blank USB hard drive 32 GB or larger. When the installation is complete, Windows 10 Upgrade will copy the windows.old file to the USB hard drive. Keep this file on the USB hard drive. It will be required to Go Back to the previous operating system if necessary.My computer definately fits in that criteria since it is equiped with a 128GB SSD. When I start the upgrade, I do not get prompted for an external hard drive. I have also tried the Media Creation Tool and ISO/USB and get the "Windows 10 Installation has Failed" error.

The system reserved partition serves a purpose. If it is deleted, then the OS will not boot back up. In which case you are toast.ON THIS PAGE, it tells what the partition is used for.-The Boot Manager and Boot Configuration Data : When your computer boots, the Windows Boot Manager starts up and reads the boot data from the Boot Configuration Data (BCD) Store. Your computer boots the boot loader off the System Reserved partition, and it boots Windows from your system drive. I advise that you not do what CanhThanh is instructing

WINCE 7 WiFi settings update failure with error CMRE_INVALID_PARAMETER

Hello,
We are facing WiFi settings update failure in WinCE 7 application when calling
CmAddConnectionConfig
API, it returns error code CMRE_INVALID_PARAMETER. The API failuer occurs randomly at some point in time, after this failure, this API always return the same error code and further it is not possible to change
the Wifi Settings at all until reflasing the SOM.
The setup:
Windows Embedded compact 7 with rollups upto November 2014 (7.1.2846.0)
EDImax (EW-7722UTnV2) WiFi adapter
Variscite OM37 SOM
Thanks and regards,
Looking for a help to resolve this issue.
Thanks and regards,
Srinivasan Chandran

Hello,
We are facing WiFi settings update failure in WinCE 7 application when calling
CmAddConnectionConfig
API, it returns error code CMRE_INVALID_PARAMETER. The API failuer occurs randomly at some point in time, after this failure, this API always return the same error code and further it is not possible to change
the Wifi Settings at all until reflasing the SOM.
The setup:
Windows Embedded compact 7 with rollups upto November 2014 (7.1.2846.0)
EDImax (EW-7722UTnV2) WiFi adapter
Variscite OM37 SOM
Thanks and regards,
Looking for a help to resolve this issue.
Thanks and regards,
Srinivasan Chandran

Windows 8.1 upgrade fails with error code 0x80070057

I have attempted to upgrade Windows 8 Pro (Msdn) to 8.1. The install gets as far as 'Applying changes, then comes up wiith the extremely helpful error message 'The application wasn't installed'. Clicking on view details gives, the equally helpful,
'Something happened and Windows 8.1 couldn't be installed> Please try again. Error Code: 0x80070057.
What is going on here?
On a second note, I have two PCs running Windows 8. One of them had the upgrade on offer this morning, the other didn't. Curiouser and curiouser.

Hi,
Please refer to this article before you upgrade to windows 8.1:
Update to Windows 8.1 from Windows 8
http://windows.microsoft.com/en-us/windows-8/update-from-windows-8-tutorial
if the process still fails, try to upload the cbs.log and windowupdate.log.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Secondary DPM backup failure with error code 0x80070002

Hello everyone,
I have the following scenario:
Protected Server -> Primary DPM (DPM 2012 R2 UR4) -> Secondary DPM (DPM 2012 R2 UR4 - remote network)
I have created a Protection Group in Primary DPM server containing three folders under C: drive. Backups works fine.
In my Secondary DPM server, I have created a Protection Group containing my Primary DPM server's protected data, which is the entire drive C:.
I am getting the following error while running a Consistency Check on Secondary DPM server:
An unexpected error occurred while the job was running. (ID 104 Details: The system cannot find the file specified (0x80070002))
In the logs, I just see entries like this:
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\DATA\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070002] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\
In the DPM console, this data source status icon shows green, however no Recovery Point is created.
Do you guys have any idea on why this is happening?
Thanks for your cooperation.
Best regards,
Bruno Martins

Does Volume C:\ on your primary server involves boot configuration data which is offline?
This can happen due to installation of some 3rd party disk storage management solutions.
The following blog has some details on how to solve file not specified errors:
http://blogs.technet.com/b/askcore/archive/2010/06/18/reasons-why-the-error-enumeration-of-the-files-failed-may-occur-during-system-state-backup.aspx
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

BACKUP failure with error code sqlcode: -2419 with DB2 and SuSeLinux

Hi,
I have scheduled an online backup for PRD into tape drive and it failed and gave an error mesage
> SQL2419N The target disk "/dev/st0" has become full row=1
Database error -2419
I have kept the new tape but still getting the same error, My OS is Suse Linux and Database: DB2 9.7 FP4
Please Help me with the solution
Regards.
Raju

Dear Raju,
Check this & set the "fsize" parameter value.
SQL2419N The target disk “disk” has become full.
August 21, 2009
SQL2419N The target disk “disk” has become full.
Explanation:
During the processing of a database utility, the target disk became full. The utility has stopped and the target is deleted.
User Response:
Ensure enough disk space is available for the utility or direct the target to other media, such as tape.
On unix-based systems, this disk full condition may be due to exceeding the maximum file size allowed for the current userid. Use the chuser command to update fsize. A reboot may be necessary.
On non unix-based systems, this disk full condition may be due to exceeding the maximum file size allowed for the operating system. Direct the target to other media, such as tape, or use multiple targets.

Mssql 2005 express SP4 upgrade fail with error code 1603

The patch install through windows update is fail, then I do it manually, SQL server Database Services setup failed.
Here is the setup log
Property(S): USERNAME = Windows User
Property(S): PackagecodeChanging = 1
Property(S): ProductToBeRegistered = 1
Property(S): ProductState = 5
Property(S): TRANSFORMS = :SqlRun01.mst;:InstID01.mst;:InstName01.mst
Property(S): PackageCode = {49616E1E-6C6B-4938-B811-352C355EFDCE}
Property(S): MsiLogFileLocation = C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_W2K8FS_SQL.log
Property(S): AdministratorsGroup = BUILTIN\Administrators
Property(S): UsersGroup = BUILTIN\Users
Property(S): ModuleID_SYSDB2 = 75D79626_87FB_4E9A_B07F_87DAE18D0F36
Property(S): TempFolder = C:\Users\admin\AppData\Local\Temp\
Property(S): WindowsFolder = C:\Windows\
Property(S): CommonFilesFolder.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:\Program Files (x86)\Common Files\
MSI (s) (B0:F8) [11:55:54:332]: Note: 1: 1729
MSI (s) (B0:F8) [11:55:54:332]: Product: Microsoft SQL Server 2005 Express Edition -- Configuration failed.
MSI (s) (B0:F8) [11:55:54:333]: Windows Installer reconfigured the product. Product Name: Microsoft SQL Server 2005 Express Edition. Product Version: 9.4.5000.00. Product Language: 1033. Reconfiguration success or error status: 1603.
MSI (s) (B0:F8) [11:55:54:355]: Deferring clean up of packages/files, if any exist
MSI (s) (B0:F8) [11:55:54:355]: MainEngineThread is returning 1603
MSI (s) (B0:40) [11:55:54:356]: RESTART MANAGER: Session closed.
MSI (s) (B0:40) [11:55:54:356]: No System Restore sequence number for this installation.
=== Logging stopped: 1/10/2012 11:55:54 ===
MSI (s) (B0:40) [11:55:54:358]: User policy value 'DisableRollback' is 0
MSI (s) (B0:40) [11:55:54:358]: Machine policy value 'DisableRollback' is 0
MSI (s) (B0:40) [11:55:54:358]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (B0:40) [11:55:54:359]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B0:40) [11:55:54:359]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B0:40) [11:55:54:360]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B0:40) [11:55:54:360]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B0:40) [11:55:54:360]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (B0:40) [11:55:54:360]: Restoring environment variables
MSI (s) (B0:40) [11:55:54:361]: Destroying RemoteAPI object.
MSI (s) (B0:AC) [11:55:54:361]: Custom Action Manager thread ending.
MSI (c) (04:88) [11:55:54:364]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (04:88) [11:55:54:366]: MainEngineThread is returning 1603
Please help.... Thanks~~

Thanks your quick reply,
As I checked before, the version is 9.3.4035
Please check the summary.txt
Microsoft SQL Server 2005 9.00.5000.00
==============================
OS Version : Service Pack 2 (Build 6002)
Time : Tue Jan 10 11:52:15 2012
w2k8fs : 64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).
Machine : w2k8fs
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SQLSupport_1.log
Machine : w2k8fs
Product : Microsoft SQL Server Native Client
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SQLNCLI_1.log
Machine : w2k8fs
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SqlWriter_1.log
Machine : w2k8fs
Product : SQL Server Database Services
Error : The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Machine : w2k8fs
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.4.5000.00
Install : Failed
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SQL.log
Last Action : SetInstanceProperty
Error String : The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Error Number : 29528
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.

3.0 upgrade failure with Error 1604

Similar Messages

Maybe you are looking for