8600 Plus, Mac OS 10.8.5 scanner won't connect to wireless

I have an Officejet Pro 8600 Plus connected wirelessly (Apple Time Capsule) to my Mac running OS 10.8.5.
The wireless connection light indicates that it is connected, and I can print wirelessly from the Mac with no problem. The copy function works fine.
However, the Scan function will not connect to anything. When I try Scan To Computer, and follow the instructions (go to HP Utility and Enable Scan to Computer) I get "Communication Error - Unable to communicate with device. Check cables and connection settings. If the problem persists, try restarting computer and the HP device."
I looked at the connection settings, and have no idea what might need to be changed. Restarting achieved nothing. What should I do next?

Hi solutionseeker,
I would like to help you be able to scan from your 8600 to your Mac 10.8.5. I suggest uninstalling and reinstalling the software. Please use the instructions below to complete a more comprehensive uninstall than the basic uninstall.
Scrub/ Uninstall
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
* Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
Click uninstall.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OKto confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-clickDisk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. > Officejet-Pro-8600_v12.23.0.dmg
When you add the printer, please ensure you are using the HP driver, not the AirPrint driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know if you can scan now. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

What do I do if I have one Apple ID for my phone and a different one for my mac. I have tried to sync garageband to my mac from my phone but it won't connect. Is it because of the different ID's? If so what can I do to fix it?

What do I do if I have one Apple ID for my phone and a different one for my mac. I have tried to sync garageband to my mac from my phone but it won't connect. Is it because of the different ID's? If so what can I do to fix it?

You can use one account with iTunes on your Mac, and different account(s) with the Mac App Store (for buying/downloads apps or OS updates for your Mac), iCloud (System Preferences > iCloud) and Messages (Messages > Preferences, or command-comma)

I just bought a new Mac Mini 2.5 and it won't connect to the internet.

I got my new Mac mini set up but it won't load the connection, System Preferences Network says it's connected and I compared it to my old Mac Mini and everything matches up (IP address matches except last 3 digits). I open Safari or iTunes and they try to connect but no luck, on Safari the blue bar moves in the address line but stops and nothing happens. I'm on my old mini now so I I'm not having a problem wiht my provider, oh and I've got an ethernet connection to a Motorola surfboard. Any idea what is wrong?

Hello, might try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
IFor 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

Power Mac G3 Pismo with Airport wireless card in Mac OS X 10.4 won't connect to wireless network with newest Airport Extreme Base Station set at WPA Personal/WPA 2 Personal encryption.

My Power Book G3 Pismo with an Airport wireless card running Mac OS X 10.4.11 will not connect to my new Airport
Extreme Base Station using WPA Personal/WPA 2 Person encryption. The Airport firmware is version 9.52. From
posts I've read online at different places indicates the Airport card should support the WPA encryption. Perhaps the problem
is the Base Station is using a combination setting and the fault is in the base station?
Thanks for any suggestions

Perhaps an inexpensive usb wireless adapter would work as well?
This is probably the simplest way to get the G3 connected to the wireless network.
I'll have to read up on getting an express and using it as a wireless bridge as I am unfamiliar with the concept.
The new AirPort Extreme is broadcasting a wireless signal.
A new AirPort Express could be located close to the G3. The Express will pick up the wireless signal from the AirPort Extreme, then provide an Ethernet connection to the G3 though a short Ethernet cable.
This can work very well......IF.....you keep the G3 at a fixed location, since it will always be connected to the AriPort Express using an Ethernet cable.
I do have an old Linksys Wireless G router. I wonder if that would work?
In theory, yes. But it would have to use much older WEP "security", which is easily cracked in minutes using free tools available on the Internet. So, anyone who really wanted to get on the network could do so. It's an option, but not a very good one.

Macbook Air Safari (Mac OS X 10.6.8) won't connect to Google, Yahoo, or Facebook but yet allows other websites to connect. Help!

My daughter's Macbook Air Safari (using Mac OS X 10.6.8) won't allow her to connect to Google, Yahoo and Facebook. It will for some reason allow for Bing searches and connections to specific other websites. The wifi seems to be connected fine. We have done the "reset Safari" excercise and updated for the most recent software updates. Also did the good old shut down and restart but no go. Does anyone have any other suggestions or seen this problem before?
Thanks!

There may be a redirect issue if an adware software has been
installed by accident or by intent; usually if someone goes to a
web site where questionable downloads of software are free,
there may be (included, added to) the packet you get, adware
or perhaps even malware.
So, if this is the case, the symptoms you say are part of this
experience may be related to an adware or other badware
running in the background. A 'cleanmymac' or 'mackeeper'
can also mess up a Mac computer, & they are not advised.
Several posts to the ASC discussions are about these kinds
of things and many point back to a user going to some web
site and downloading something. A click can do it.
A way to help find some evidence of certain kinds of add-ons
(outside of looking into the Browser's add-ons and see about
deleting those that relate to odd behavior, or badware) such
as adware, one could get and use this free utility & get a
report of general system info, and then post it online to see
if someone can spot some of the characteristics adware or
other malware may have included in the system.
There is another way to get a more lengthy report than etrecheck
as Linc Davis has posted, that uses more detailed effort on the
part of the user, in order to get a larger fuller report.
This is the short and easy way to look for a few clues that may
be addressed through using advice in TheSafeMac guide.
•EtreCheck: (also click on read-more)
http://www.etresoft.com/etrecheck
The report from the above may be helpful along with info in the
site below. Note there are other guides in TheSafeMac, too.
•Adware Removal Guide:
http://www.thesafemac.com/arg/
Hopefully the issue with the browser can be resolved in one
of up to three/four different ways, depending on what it is.
PS: recent updates to some OS X versions, etc do not
include update to Snow Leopard; only later systems.
{by the time I write all this, you may already have a reply}
Good luck & happy computing!

Officejet Pro 8600 won't connect to wireless with Wireless extender connected

I am trying to get an Officejet Pro 8600 to connect to a wireless network, but it will not connect when my wireless network extender is connected. Once I disconnect the extender, it connects fine. Here is the setup. I have a Netgear wireless cable gateway CG3000D with a Amped Wireless Dual Band Router (R20000G) connected to the Netgear via ethernet cable. The Amped router is setup as a wireless extender, the Netgear and Amped share the same SSID. All my other devices work just fine connecting, laptops, cell phones, and IPads. When the Officejet 8600 tries to connect with the Amped connected, it tells me invalid password. Once I disconnect the Amped, the Officejet connects just fine. Any ideas how to get the Officejet to connect to the wireless with the Amped extender connected? Thanks

Are you using the same passkey on the extended network? (It is best to)
If so I would try using different SSIDs. The printer will try to connect to the network with the better signal which might change depending on wireless interference. There is no way to force the printer to connect to one network over another if the SSIDs are the same.
One other possibility. Is the passkey the same for both 2.4 and 5ghz on the Amped Dual Band router? Most routers can be set up to have different passkeys for each band. The printer is a 2.5ghz device and will need that password the same on both the Amped and Netgear routers.
Please let me know your results. Extending networks is becomming more common. Understanding how to work with them will help everyone.
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

Power Mac Dual 1.8 Ghz: How do I connect to wireless network?

HELP!!!
I have this Power Mac Dual 1.8 Ghz with 10.4.11 OS. I used to use wire cable to connect the internet, but now the place I rent recently only provides wireless network. I was able to connect wireless network with my Windows Laptop.
Question: How do I connect my Dual 1.8 OS 10.4.11 with wireless network? I only see Internal Modern, Built-in Ethernet and Build-in FireWire options.

You can go the OWM route and get the airport extreme card and antenna
http://www.dvwarehouse.com/Apple-Airport-Extreme-Wireless-Card-802.11G-M8881-p-3 1367.html
http://www.dvwarehouse.com/Apple-Airport-External-Antenna-for-G5-2004-2005--MacP ro-Early-2008-A1066-922-6043---NEW-p-33986.html
Google the part numbers for more vender choices,
Or, you need to get a PCI WiFi card and antenna. BDAqua or Japamac have posted alternatives which are actually a little cheaper than the Apple parts.
The third alternative is a USB-based wireless adapter.

HP 3510 all-in-one won't connect to wireless - MAC filter

I'm trying to set up my HP Deskjet 3510 e-all-in-one, but every time it tries to connect to my wireless, it fails and gives me an error saying it may be due to the MAC filtering on my router.. but there is no MAC filtering on my router! I even added it to the approved devices just in case. If I try to just set it up via USB, the software doesn't always respond to the fact that I've plugged my printer into my laptop. I'm on Windows Vista. TRIED the solution of unplugging everything, restarting everything, turning things off and on again, etc., the error never changes but I have seen for myself and had the internet company confirm that there isn't any MAC filtering on my router.

Hi,
Please enter your wireless router configuration and check what security type is configured.
May it set as WEP security?
If so, ensure the authentication type is set as Open or Auto, then try connecting the printer again.. HP printers does not support the Shared Authentication type..
Otherwise please clarify what security type is configured.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My mac can see the network but won't connect to the server

I have an intel Imac. The network connect is working but very squirrelly. I see most objects on the network. I can see the server but it will not let me connect.
I go to another mac and I can connect to the server. So I think its my mac 10.7.5 is the OS

Probably nothign to do with your iMac or OS X, have you attempted resetting your router? Also you haven't stated what messages you are getting or any other information. If this is at your work then I'd suggest contacting your IT support person, the connection to your network may be on their end.

Mac Mini (late 2009) won't connect to wireless internet

The strangest thing happened to me just recently, a conflicting IP address appeared on my Mac Mini (late 2009) a few days ago. This IP was from one of my other computers. After this other computer had been shut down ever since, I keep on getting theses window messages saying "There is a conflicting IP tommiller". I decided to restart my Mac mini only a few hours ago. I returned and the message stopped appearing, but now I can't connect to my wireless Internet. An exclamation mark appears over the airport icon in the menu bar. I took forth all the steps to restart my wireless router, but nothing worked. The wireless works fine on all my devices except the Mac mini. What really freaked me out is that I have a portable Verzion MIFI, and my Mac Mini can't even connect to that. I'm very knowledgeable with Macs, but I've never had this happen to me before. My worst nightmare would be that the wireless card is shot. If anyone has the answer to end my stressful night, I'd really appreciate it.
Thanks,
Tom Miller

Log onto your router and see what IP address are being used.
Then try setting a fixed IP address well away from any of those, using Network settings in system preferences. See if that solves the problem.

Help please! HP 6700 Scanner Won't Connect Wirelessly

Hi there,
I recently bought the HP Officejet 6700 and it prints wirelessly without a problem, but will not scan wirelessly. When I try to "Enable Scan to Computer" I get a "Communication Error" message - unable to communicate with the device. I have tried unplugging and restarting both the machine and my laptop but no change. I have also made sure all of the software and firmware are up to date but still no luck. I am using Mac OS X 10.7.5
I would really rather not uninstall the software and reinstall it if possible as there are other people in my office who couldn't get their laptop to even print wirelessly on their own printers and I'm worried that could happen to me. But I am definitely open to any suggestions.
Any help you can give me would be greatly appreciated!!!
Thank you.

Hello hpnikki,
Welcome to the HP Forums.
I see that you are having a wireless connectivity issue.
Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have located a document that troubleshoots the Printer Does Not Maintain Wireless Connection.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP OfficeJet Pro 8600 Plus will print wirelessly but not scan

I have a HP OfficeJet Pro 8600 Plus all in one printer/copier/scanner. It's worked fine for the several months I have had it. But now suddently the computer does not recognize the scanner. I am connected to the device wirelessly and can print but not scan. I haven't been able to figure out why the comptuer recognizes the printer but not the scanner. I uninstalled and reinstalled the device but still no success.
Any ideas how I can get the computer to recognize the scanner? I am running Windows 8. Have not updated to 8.1.

Hello Sarah1234, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scanning issues. I would like to help.
I would recommend powering off your printer and computer. Once they are both down, I would recommend unplugging the power from your wireless router for 60 seconds, and then plugging it back in. Once it has begun broadcasting again, power on your printer and computer.
I would also recommend downloading and running the HP Print and Scan Doctor. Once you have launched the tool, select the 'fix scanning' option.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Officejet Pro 8600 Plus

Hello.
I have the Officejet Pro 8600 Plus running on Windows 7. The printer is connected to computer by network and it is linked to the computer.
All was well with the printer untill I removed Norton and installed McAfee two days ago. Now it will not work, even with McAfee turned off.
I tried to uninstall and re install the printers programmes and driver, but it will not re install the programme or driver.
I have uninstalled all HP prog's.
Stopped all start up prog's except the Microsoft ones.
Turned off McAfee
Gone to HP and re installed the software and drivers.
These downloaded fine (took a few minutes and 123.00 MB copied) and installed.
Accepted HP licence terms and ran printer installation programme.
Got instalation complete message.
But it is not installing! Where is it downloading the programme and driver to?
Downloaded the HP Print and Scan Doctor. This finds printer and says programmes not installed. it then downloads them, but it never works. Even with McAfee firewall and scanning all turned off. If I then run it again, I get the same mesasage the programmes not installed, though it just seemed to do it....
If I go to devices / printers there is no Officejet Pro icon like there was. If I try install new printer there, I does not find the correct drivers for this HP model.
If I go to Start, all Programmes, HP and click on these icons I get message "Shortcut moved or changed"
I am at whits end with this now. Absolutly hate the McAfee.
Please help. Nick
PS.
I have got the printer partly working by using the windows available driver HP Officejet Pro K8600 Series, but this is not the correct driver. It will not scan and has very limited printing functionality.
Windows also shows a FAX - HP Officejet Pro 8600 driver, but this did not work when I tried it. Is this the proper driver for this printer??
When I try to get windows to download new drivers it goes looking but says it is unavailable and to try again later. :-(

Hey there @Nick-S!
Thank you for posting on the HP Forums!
I can see that you are experiencing some software issues with the Officejet Pro 8600 after re-installing McAfee. I would be happy to provide some suggestions that may help resolve the issue!
I suggest restoring the network defaults in the printer, power cycling the router and reconfiguring the printer on the wireless network. To restore the network defaults press the Wi-Fi icon on the printer and go into settings. Under settings should be an option to restore the network defaults. Once the network defaults in the printer have been restored power cycle the printer and power cycle the router for 20 seconds. When the printer turns back on press the Wi-Fi icon again, go back into settings and run the wireless setup wizard.
I understand you have re-installed the software but the printer is still not recognised. I recommend uninstalling the HP software one more time. After the uninstall is complete it would be a good idea to perform a disk cleanup in the computer. A disk cleanup will improve computer performance and clear temporary files that may cause issues during the install of software. Once the disk cleanup is complete you should restart the computer and re-install the HP software.
To uninstall HP software click here: Uninstalling HP Software
To perform a disk cleanup click here: Performing a Disk Cleanup
To download the HP software click here: HP Officejet 8600 Plus Software and Driver
Please post back and let me know how that goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Printer won't print - HP Officejet Pro 8600 Plus All in 1

Hi,
Please can anyone help me ?
I have Windows 7, 64 bit HP computer with a HP Officejet Pro 8600 Plus All in 1 Printer.
It printed over the network/wireless yesterday. I then had a problem scanning to the computer so I followed advice on the HP community and uninstalled and re-installed the latest software/driver for the printer.
Today it WON'T PRINT!! The printer has a connection to my router (Plus Net Technicolor N router) and shows the little symbol on the printer screen. I tried printing my work today and it says the printer is offline - it can't be as the printer is ON and has a signal connection.
I have uninstalled, reinstalled, turned it on and off on the printer, I've restarted the computer, I've unplugged and plugged in all of it - the router, computer and printer. The computer has the green tick to say the printer is the default and it is ready. It then says to check the network connection or it maybe to do with the firewall settings, but these I haven't changed for over 1 month and I've printed loads of stuff between then and yesterday.
I desperately need my printer and short of going to have to buy a brand new one - I don't know how to fix it!!!
Please can anyone out there help me??!!!
Help!!!!!!!!!!
Thanks for any helpful advice
Victoria

Just to say as well that on the top of the 'X there is a problem printing' At the top where it says the printer - it has on it 'Fax - HP Officejet Pro 8600'
So it is trying to print from the 'Fax' part of the printer and yet when I change the printer device to the actual 'printer' part to default it always changes back to the 'fax' Officejet Pro 8600 Plus rather than the Officejet Pro 8600 Plus.
I will uninstall all the elements to the printer and then find the latest driver to the printer and start again to see if that helps.
Please help me!!!
Thank you for any helpful advice
Victoria

I just upgraded to a new iMac running OS X 10.8.2 and can't scan from by Brother MHC 7820N. Printer works. I reinstalled the scanner driver but when I try to scan, the scanner doesn't connect to the imac. Image Capture says no scanner connected.

I just upgraded to a new imac running OS X 10.8.2 and am having trouble scanning from my Brother MHC 7820N. Printer works fine but the scanner won't connect to the imac. I reinstalled the scanner driver from Brother.com but no luck. When I go to Image Capture, it says no scanner connected. Any suggestions?

You might try a third party scanner software. Printer manufacturers are terrible about keeping their products updated. I'd recommend VueScan, you can get a trial version here and if it works and you like it you can purchase it.
http://www.hamrick.com/

8600 Plus, Mac OS 10.8.5 scanner won't connect to wireless

Similar Messages

Maybe you are looking for