A follow-up question for deggie

Deggie:
Many thanks for your response to my question about using a monaural earphone with my iPod! Here’s why I thought the monaural plug would short something in the iPod output. The monaural plug is the same length as the stereo plug for the regular iPod earphones. The stereo plug has three segments - let’s number them from the tip as #1, #2, and #3. The monaural plug has only two segments, which we can number from the tip as #1 and #2. Segment #2 is the same length as segments #2 and #3 on the stereo plug, so that leads me to believe that it will short together the iPod contacts which align with the stereo segments #2 and #3. Does this make sense? Can you help me understand this situation?

I'm looking at one of my sets of stereo earbuds, starting from the tip I see only 2 segments, evenly spaced, so apparently your monaural headset uses the stereo plug and merges the signal at the headset. There really is no way to "short" the headset connections a standard miniplug so no damage can result. I've used my B&W headphones with a 1/4" plug adapter and the cable that has the microphone and controls, the only issue was a touchy connection that would cut out the signal if touched. Switching to the stereo only cable solved that problem.
You will not damage your iPod with that headset.

Similar Messages

  • Follow-up question for Chris H on longtext in BDC for IW31

    Chris -
    Here's the relevant part of my code:
    PERFORM DYNPRO USING:
    'X' 'SAPLCOIH'          '3000',            "
    ' ' 'CAUFVD-KTEXT   '   SCRN_PROBLEM1,     " 1st line problem text
    ' ' 'CAUFVD-ANLZU   '   CAUFVD-ANLZU,      " System condition
    ' ' 'BDC_OKCODE'       '=LTXK'.            "
    LOOP AT i_txt INTO wa_txt.
      v_txtln_ctr_n = sy-tabix + 2.    " Chris - note that I'm bumping to "3" here
      v_txtln_ctr_c = v_txtln_ctr_n.
      CONCATENATE 'RSTXT-TXLINE('
                  v_txtln_ctr_c
             INTO v_bdc_txtln_lit.
      CONDENSE v_bdc_txtln_lit NO-GAPS.
      PERFORM DYNPRO USING:
        'X' 'SAPLSTXX'          '1100',              "
        ' ' v_bdc_txtln_lit     wa_txt,              " line of problem text
        ' ' 'BDC_OKCODE'        '=ENTR'.             "
    ENDLOOP.
    This actually works - it creates an order in which the long text begins with what is in the variable SCRN_PROBLEM1 and continues with what is in i_txt concatenated together.  So I get, for example:
    "This is the short description. a b c d e"
    where:
    scrn_problem1 = 'This is the short description'
    row 1 of i_txt = 'a'
    row 2 of i_txt = 'b'
    row 3 of i_txt = 'c'
    row 4 of i_txt = 'd'
    row 5 of i_txt = 'e'
    The only problem is that the BDC doesn't go thru on its own.  When I change 'N' to 'E', the BDC brings up a screen with the title:
    "Change order text header Alternative Language EN"
    Then, when I just "back-arrow" from this, the BDC does complete successfully and I can see the correct text saved for the order in IW32.
    What am I doing wrong to cause this "change order text header" screen to come up?  Is it the "LTXK" value of the OK-CODE in the first dynpro call above?
    Or maybe something with my default user parameters?  I had to set quite a few of these in order to get the BDC to go with just a system, priority, and short text/long text.
    I'm really hoping you can see what's going on here because I'm at a loss.
    Thanks for whatever help you can provide.  You seem to have coded this BDC before, so that's why I'm directing this question to you.
    BTW, I'd try the BAPI except the documentation specifically says it won't observe user default parameters and this is a must in our situation.
    Thanks again
    Dave

    Chris/Rich -
    My suspicion was correct.  In the last loop over the longtext itab, the ok_code must be 'TXBA', not 'ENTR'.
    Here's the code that works without any 'E' interruptions:
    PERFORM DYNPRO USING:
    'X' 'SAPLCOIH'          '3000',            "
    ' ' 'CAUFVD-KTEXT   '   SCRN_PROBLEM1,     " 1st line problem text
    ' ' 'CAUFVD-ANLZU   '   CAUFVD-ANLZU,      " System condition
    ' ' 'BDC_OKCODE'       '=LTXK'.            "
    DESCRIBE TABLE i_txt LINES v_txt_cnt.
    LOOP AT i_txt INTO wa_txt.
      v_txtln_ctr_n = sy-tabix + 2.
      v_txtln_ctr_c = v_txtln_ctr_n.
      CONCATENATE 'RSTXT-TXLINE('
                  v_txtln_ctr_c
             INTO v_bdc_txtln_lit.
      CONDENSE v_bdc_txtln_lit NO-GAPS.
      IF sy-tabix = v_txt_cnt.
        v_txt_ok = '=TXBA'.                    " no more text lines coming
      ELSE.
        v_txt_ok = '=ENTR'.                    " more text lines coming
      ENDIF.
      PERFORM DYNPRO USING:
        'X' 'SAPLSTXX'          '1100',       
        ' ' v_bdc_txtln_lit     wa_txt,        " line of problem text
        ' ' 'BDC_OKCODE'        v_txt_ok.      " ok_code
    ENDLOOP.
    The result is that the longtest display in IW32 will be what's in "SCRN_PROBLEM1" followed by all the lines that are in i_txt.
    Reagrds
    djh

  • QS1 MasterCard to QS MasterCard product change approved! Follow up questions for all.

    My co-worker called in and requested a product change from QS1 to QS MasterCard with no annual fee after having the card for little over a month. My question is will the refund a portion of the annual fee and do you think they will make this card a World MasterCard? Her credit line is currently $3K.  

    jaylau17 wrote:
    sjt wrote:
    jaylau17 wrote:
    fomuscles wrote:
    I dont think the QS comes in a world mastercardActually, it can, but they are rare! I have one!
    In answer to the OP's other question, it will likely not be a World MasterCard. Capital One's frontline CSRs typically do not perform upgrades to the WMC version (although, once in awhile they will, usually if the limit is over $5000). Often to get the World MasterCard upgrade on your QS MasterCard, you will have to contact the EO like I did.  Actually my co-worker called this a number and spoke with an Account Manager who then transfered her to another department. The person she spoke with put in the request and it was approved for a reular QS. She did not think to ask for a WMC or a cli. I did read in another post that folks were upgraded to a WEMC from a Platinum MC with cl as low as $2K, so shes hoping for a WMC or a WEMC.   I think you misread my post. I never claimed that frontline customer service doesn't do upgrades from QS1's to QS's (in fact, MY upgrade to a QS MC originally was from a frontline CSR!) I stated specifically that frontline CSRs are not normally the ones who process the upgrades from QS MCs to QS World MCs (although once in awhile they do). However, myFICOers have had A LOT more success with the EO for this particular upgrade, as the frontline CSRs are usually powerless here.I understood what you were saying, I was just pointing out that my co-worker spoke with an Account Manager wh then transfered her to another department.  

  • Follow Up Question For Patrick (et al.) ...

    Good morning, Patrick,
    A short while back I asked for a recommendation as to a means for freeing up one of the 500GB drives in my new Mac Pro for media by purchasing an additional drive to run the OS on. You suggested a Seagate and stated that you planned on using the optical bay, something I know nothing about. Did you mean that the Seagate could go in the optical bay, or would that require a different drive? I don't mind filling one of the 4 SATA slots (is that the right terminology?). Geez, I didn't realize how rusty my hardware know-how had become.
    Let me rephrase.
    Will this one work?
    Also, what's involved with moving the OS to a new drive?
    Thanks so much for your help,
    Zap
    Dual 2 GHz Power Mac G5 / 2 GB Ram Mac OS X (10.3.9)

    Patrick and I (and a few other L4s) talked about this possibility before this product was announced. We noticed that there were two unoccupied SATA connections on the logicboard, and discussed taking the stock drive that ships with the computer and setting it in the space where the second optical would go, leaving the rest of the bays for a fairly decent RAID.
    Nice to see a company making a product that does just that. Although I'd never put four drives up there. You'l lose your optical drive for that and, well, you need your optical.
    Shane

  • Follow up question about image not looking good in canvas-Shane?

    I guess this is a follow up question for Shane....
    You wrote this in response to someone a year ago which helped me out.
    Shane's Stock Answer #49 - Why is the quality different between what I see in the Viewer and what I see in the Canvas?
    Well... the viewer is just that-- a viewer. It will display anything that fcp will recognize as usable video or graphics. The canvas is a viewer too, but at the pixel dimension specified by the settings of your project and sequence.
    For example, if your graphic or footage is much higher resolution than your 720x480 DV sequence, FCP is interpolating down your file to fit the settings of the sequence. Usually this makes it look not so hot. DV is a 5:1 compression working with a 4:1:1 color depth. Your pristine picture images and graphics are being crushed.
    Same with picture files. HIgh res pics now adopt the sequence settings and will render to those specs, and most likely they are not as high quality.
    So, based on your answer, I made an HDV sequence, dropped my DVCPro50-NTSC footage and my tiffs into the sequence and now the stills look great. Is this an okay workaround or do you have another suggestion? I'm worried about this HD sequence taking too long to make a compressed QT from in the end.
    Thanks!

    Photo JPEG is a good option.  But this all depends on what your final output will be.  If you are going to make a DVD, then that is SD, so using an HD sequence setting makes no sense.  Photo JPEG is good, but not realtime in FCP.  DV50 or ProRes NTSC are good options.
    Unless you are making an HD master...in which case ProRes 422 for HD is good

  • Scoping Question on follow-up documents for Sales Quotes

    One of the scoping questions in the "Integration into Sales, Service, and Marketing Processes" in the Customer Quotes section asks:
    "Do you want to create follow-up documents for sales quotes from your cloud solution to an external application?"
    See screenshot with the arrow cursor below:
    What follow-up documents is this referring ?
    Would be related to creating Sales Orders in the ERP ?
    What other followup documents could there be ?  The Help text was not very clear.

    Hi Tim,
    On creating the sales quote in C4C, request can be triggered to ERP system for Sales Order Request.
    Once Sales Order gets created in the ERP system, 'Sales Order Request' and 'Sales Order' documents can be captured in C4C.
    Regards,
    Siddhartha

  • View follow up questions in Q&A pod in a threaded or some other related view

    Currently when a question is answered it will be linked to the question. We sometimes have participants requiring further information about the same question, but Adobe Connect does not seem to allow participants to click the response and add follow up questions. As a presenter you can click on answered questions and add more but participants always have to submit new unlinked questions. Is there a way for participants to ask follow up questions in Q&A pod so that they are threaded to their original question?

    Currently when a question is answered it will be linked to the question. We sometimes have participants requiring further information about the same question, but Adobe Connect does not seem to allow participants to click the response and add follow up questions. As a presenter you can click on answered questions and add more but participants always have to submit new unlinked questions. Is there a way for participants to ask follow up questions in Q&A pod so that they are threaded to their original question?

  • IMovie and external hard drive: follow up question

    This is a follow up question from the iMovie 6 forum. Hopefully, this question will help the poster on that forum as well. I, too, am working on multiple iMovie 5.0.2 projects at the same time and am running out of hard disk space. I would like to transfer remaining miniDV tape to an external hard drive and, when finished, transfer these clips from the external hard drive to the current iMovie project in my Powerbook, one project at a time. Is this possible ? Will I transfer files from the external hard drive to the Powerbook hard drive and then to iMovie, or directly from the external hard drive to iMovie ? Do I have to format the external drive to Mac OS Extended as advised in iMovie 6 forum in order to transfer miniDV tape to the external hard drive ? When pressing the erase tab to format the external hard drive, will this erase files already on the hard drive before formatting ? Can I transfer projects I am not working on from iMovie to the external hard drive and then transfer them back to the Powerbook when it is time to work on them ? Sorry about all the questions but I need to think very simple-minded when it comes to computer related issues. Thanks for your help.

    I was able to use and store iMovie in the external hard drive using my Powerbook as a monitor, so I presume it is formatted correctly
    Sorry, but you cannot assume the drive is formatted correctly. iMovie doesn't tell you the drive format is incompatible with iMovie. (it should, but it doesn't.) Some iMovie project features can be saved and some cannot.
    It's easy to check the disk format. In the Finder, click on the drive icon and choose File > Get Info from the Finder menubar. The window that opens shows the disk Format. You want it to say "Mac OS Extended". "(Journaled)" is optional.
    With some drives, sometimes even that can be wrong. To be sure, use Disk Utility to check the format. When you click on the drive in the list along the left side of the Disk Utility window, the format is displayed at the bottom of the window.
    Always, always, always check the disk format before using a drive with iMovie.
    Karl

  • Follow up question...

    I just purchased a Airport Extreme from the Apple Store yesterday. I purchased it to extend/share my iPhone 5 hotspot. I have figured out how to have AEBS join my hotspot, but it does not seem to have access on the Ethernet ports in the back?? This is my needed feature, unfortunately I live in an area that only offers DSL and only 2.5mbps.. .  Using my phone I'm able to receive 10-20mbps on LTE/4G, and fortunately for me I have unlimited data on my hotspot. So I'm set for the wireless devices in my home, but struggling getting wired devices working....
    Any help will be greatly appreciated!
    Thanks,
    Tim
    Info
    iPhone 5 iOS 7.0.4
    Windows 8
    Linux Ubuntu 12.10
    Airport Extreme Base Station, iOS 7.0.4
    This solved my question by Bob Timmons  on Nov 28, 2013 3:33 PM
    No, only the AirPort Express. There are 2 Ethernet ports on the Express. If you need more, you can add an Ethernet switch.
    The Express has a special feature called ProxySTA that allows it to join a network and the Ethernet ports will be enabled when it does this.
    Might be fun to ask one of the sales guys what exactly ProxySTA is and what it does before you explain it to them. Even the "genius" may not know.
    See the answer in context
    Follow Up Question----
    I asked the apple salesperson about proxySTA, first I got a blank stare then, some nonsense to attempt they knew what it was.
    So I picked up the Express, set it up to join my hotspot and it works really well!!! The only problem is the hotspot only allows five connections. The express eats one, that only leaves four! Is there another way to set up the express so it can handle the dhcp so my hotspot only sees the one connection to the express??
    Thanks,
    Tim

    Now please perform a hard reset on the second Express by holding in the reset button for 10 seconds, then release. Allow a full minute for the Express to restart to a slow, blinking amber light.
    Make sure that the Ethernet connection from the first "joining" Express goes to the WAN "O" port on the second Express creating a wireless network.
    Don't worry about the Double NAT message for now, just make sure that you can now log on to the Internet through the second Express wireless network.
    You may need to power off both Express devices and restart the "joining" Express first, then start up the "creating" Express.
    Once you verify that everything is working, you can go back in using AirPort Utillty and click to ignore the Double NAT so that a green light will be displayed on the second Express.

  • Upgrade question for ISE 1.1.1 to 1.1.2 patch 8

    Hi everyone,
    I need some advise on upgrading from ISE 1.1.1 patch 3 to 1.1.2 patch 8...
    I have read the upgrade document on the Cisco website http://www.cisco.com/en/US/docs/security/ise/1.1.1/upgrade_guide/upgrade.html and tried to understand it properly, but I have a couple of questions about it.
    Firstly, the procesdures detailed are only relevant if you are upgrading from 1.0 or 1.1 to 1.1.x ( i think )... Well I am already running 1.1.1 and I want to upgrade to 1.1.2 patch 8, so is this document right for me?
    Secondly, I would like to follow the procedure for a "Two Admin Node Deployment". But the caveat message and Warning message directly below the diagram worries me as I do not know whether these apply to me...
    This supports an upgrade of Cisco ISE, Release 1.0 or 1.1 to Cisco ISE, Release 1.1.x with split domain upgrade only, so that the secondary ISE node has to be deregistered individually from the deployment before upgrade.
    As I said, firstly I am not upgrading from 1.0 or 1.1 and secondly, what is a split domain upgrade?
    Hope you all can help!
    thanks
    Mario

    Thanks Ravi / Tarik,
    so I need to perform a split domain upgrade by following the steps below... (sorry about the formatting)
    To perform a two-adminnode deployment upgrade, complete the following procedure:
    Step 1
    Perform an on-demand backup (manually) of the Primary Administration ISE node from the admin user interface or CLI and an on-demand backup of the Monitoring node from the admin user interface, before upgrading to Cisco ISE, Release 1.1.x.
    .Step 2Deregister the secondary node (Node B) from the deployment setup. After deregistration, this node becomes a standalone node.Step 3Upgrade this standalone node to Cisco ISE, Release 1.1.x.When you log in to Node B after the upgrade, if the system prompts you for a license, you must install a valid license for the secondary node based on its UDI. See Obtaining a Valid License, page 1-2 for more information.For more information on how perform an on-demand backup, see the "Performing an On-Demand Backup" section on page 1-3
    Step 4Convert the primary node of the previous deployment (Node A) to a standalone node.Step 5Make Node B as the primary node in the new deployment.Step 6Upgrade Node A to Cisco ISE, Release 1.1.x and register to Node B in the Cisco ISE, Release 1.1.x deployment setup as the secondary node.
    After you upgrade your deployment, all the policies and other data of the previous deployment will be retained in your new deployment.

  • LDAP design question for multiple sites

    LDAP design question for multiple sites
    I'm planning to implement the Sun Java System Directory Server 5.2 2005Q1 for replacing the NIS.
    Currently we have 3 sites with different NIS domains.
    Since the NFS over the WAN connection is very unreliable, I would like to implement as follows:
    1. 3 LDAP servers + replica for each sites.
    2. Single username and password for every end user cross those 3 sites.
    3. Different auto_master, auto_home and auto_local maps for three sites. So when user login to different site, the password is the same but the home directory is different (local).
    So the questions are
    1. Should I need to have 3 domains for LDAP?
    2. If yes for question 1, then how can I keep the username password sync for three domains? If no for question 1, then what is the DIT (Directory Infrastructure Tree) or directory structure I should use?
    3. How to make auto map work on LDAP as well as mount local home directory?
    I really appreciate that some LDAP experta can light me up on this project.

    Thanks for your information.
    My current environment has 3 sites with 3 different NIS domainname: SiteA: A.com, SiteB:B.A.com, SiteC:C.A.com (A.com is our company domainname).
    So everytime I add a new user account and I need to create on three NIS domains separately. Also, the password is out of sync if user change the password on one site.
    I would like to migrate NIS to LDAP.
    I want to have single username and password for each user on 3 sites. However, the home directory is on local NFS filer.
    Say for userA, his home directory is /user/userA in passwd file/map. On location X, his home directory will mount FilerX:/vol/user/userA,
    On location Y, userA's home directory will mount FilerY:/vol/user/userA.
    So the mount drive is determined by auto_user map in NIS.
    In other words, there will be 3 different auto_user maps in 3 different LDAP servers.
    So userA login hostX in location X will mount home directory on local FilerX, and login hostY in location Y will mount home directory on local FilerY.
    But the username and password will be the same on three sites.
    That'd my goal.
    Some LDAP expert suggest me the MMR (Multiple-Master-Replication). But I still no quite sure how to do MMR.
    It would be appreciated if some LDAP guru can give me some guideline at start point.
    Best wishes

  • Interview questions for oracle dba

    Hi I am trying to find teh interview questions for oracle dba .
    What will be your answer to the following questions. Can somebody shed some light...
    . What is the day to day duties of oracle dba?
    ·     Did you use online or off-line backups?
    ·     What version of Oracle were you running?
    ·     Haw many databases and what sizes?
    ·     If you have to advise a backup strategy for a new application, how would you approach it and what questions will you ask?
    ·     If a customer calls you about a hanging database session, what will you do to resolve it?
    ·     Compare Oracle to any other database that you know. Why would you prefer to work on one and not on the other?
    Thx
    KK

    . What is the day to day duties of oracle dba?
    I have got a checklist, designed for my daily, weekly, fortnightly and monthly tasks. For example, in the daily checklist tasks, I check for the alert log file, competion and correction of my exports and operating system backups. DB space situation, Antivirus status, standby database status, space on disks, any rogue queries etc.
    · Did you use online or off-line backups?
    Both.
    · What version of Oracle were you running?
    8i(not any more), 9i, 10g
    · Haw many databases and what sizes?
    8 databases, ranging from 1 TB to 10 GB. I have segregated them into OLTP production, testing, cm, and development and a Datawarehouse.
    · If you have to advise a backup strategy for a new application, how would you approach it and what questions will you ask?
    How much they could afford to lose data or they want zero data loss and also I will get their requirements about down time and up time of database.
    · If a customer calls you about a hanging database session, what will you do to resolve it?
    First I will identify it, then see to it what exactly it is doing, capture that situation and then either try to release the locks(if its a blocking or blocked session), or kill the session, if its hanging on a runaway query.
    · Compare Oracle to any other database that you know. Why would you prefer to work on one and not on the other?
    Oracle passes the ACID rule with distinction as compared to the other databases. Moreover, the multiversion read consistency, recovery, flexibility and challenges of Oracle are matchless.
    Cheers
    fahdoracle.blogspot.com

  • Basic questions for a self-taught re: HDV for SD HDV (yes again)

    ok - like many others posting on this topic, I am apologising for going over what seems to be one of the most covered topics out there, that still isn't clear!
    I am trying to teach myself DVD SP4 in the same way I did with FCP5 (trial, error and lots of forum searching). I am by no means a pro on FCP - but have certainly got enough understanding of it to have cobbled together 7 23 minutes episodes to broadcast! I have gone thought the DVD SP4 Manual and forums and lots of it just makes my brain ache - what mostly lets down my understanding are formats/compression/codecs.
    So - my main questions (for now....)
    -In DVD SP I couldn't import my QT movie into my assets list as it was an "incompatible format" - is this because it was HDV to a SD DVD Project? Doesn't the process of DVD SP encoding it as Mpeg 2 make is SD anyway?
    -I read a post from someone in a similar situation, who advised exporting a HDV sequence as Uncompressed 8 Bit, and bringing that to DVD SP. So am doing that now (6 hours or so for a 23" sequence) and am hoping it gives a great looking picture, but I have seen from its preview icon that its a 720 x 576 frame - why is it not exporting in 16:9? or will it squeeze that down to normal once it's in DVD SP?
    Really appreciate any understand you can help me with.
    cheers
    Hugh

    Hughey wrote:
    Going back to my original questions - could the problem be a HD file in an SD project?
    No. If you followed the workflow process from the above post you would have a SD mv2 file. The file should be playable in Quicktime and it should be 16:9.
    EDIT: Yes. Reading back on your OP this question ->
    In DVD SP I couldn't import my QT movie into my assets list as it was an "incompatible format" - is >this because it was HDV to a SD DVD Project? Doesn't the process of DVD SP encoding it as Mpeg 2 >make is SD anyway?
    I believe that importing a HDV file into a SD project would give you that error but if you follow the above steps and import the mv2, AC3 files you should not get that error.
    The reason you got three files is because that is how the preset group is made up. To be completely truthful I duplicated that preset, deleted the AIFF part and renamed the group. I now use that as my default settings when I bring any asset into Compressor.
    As far as bring video assets (quicktime SD/HD, or other) into DVDSP in general you can do this but, what is happing is that in the background DVDSP is going through the steps from my above post and creating the mv2, AIFF, AC3 files for you (based on your preference setting in DVDSP) and then replacing the video files you brought in with the compressed files.
    Can you play the mv2 file in quicktime? If not then something else must be going wrong.

  • What is the best way to follow the scenario for Out look integration with share point using SAP Gateway?

    1)what is the best way to follow the scenario for Out look integration with share point using SAP Gateway?
    2)workflow concepts for Purchase order?
    3)Email triggering from out look for an approval process of PO? how these scenario can be best implemented with updated functions in Duet Enterprise.

    Hi,
    I do not have much idea on gateway integration with outlook but found out this document GWPAM Workflow Template which can be helpful for you to start with.
    also you may want to post your question in SAP Microsoft Interoperability forum
    Regards,
    Chandra

  • Solman 7.0 : Resolution for error 'Answer the question for currnt SAP comp.

    Hello sap experts,
    We are in the process of setting up Service Desk for Solman 7.0 (SP 19) for which we have created a custom user status profile ZSLFN001 and attached to SLFN transaction.
    Now we are able to create a new message with the customized dropdown for user status (fast entry screen), but when a message processor is assigned to the notification an error is generated with the following details.
    Message type : Error (Red traffic light)
    Ref object : Header Data
    Message Text: "Answer the question for the current sap component.".
    I feel this has something to do with the action "Answer to app-specific questions" but am not sure what i am missing here.
    Regards,
    Vivek

    Hi,
    Yes you have to use that action.
    In addition check this note
    Note 1301955 - Error message for answering application-specific questions
    Regards
    Prakhar

Maybe you are looking for