Abolish product cost collector for production order

Dear Experts,
we use for some production order types the product cost collector. Now we plan to abolish them and change the settlement for production order. Which things do we have to pay attention? Do we have to finish our running production orders first or is it possible to change customizing during running production process. Thanks for your hepl!
Best regards
Steffen

Hi Ajay,
thank you for your answer.
We have tested two variants:
1. new order type, so we can process two separate settlements, for orders with PCC and the new orders without PCC. After archiving of all prodorders with pcc, archiving of pcc it should be possible to switch back to old order type.
2. change customizing without finishing existing orders, settlement for existing orders, all orders which already have been processed will be settled by pcc (status pcc usage in order header) We have not be seen any strange system behavior.
We use the pcc collector for different order types in different plants and want to abolish plant by plant. In this time the pcc will still be customized/exists.
Best regards
Steffen

Similar Messages

Product cost collector for sales order related production

Hi Friends,
This is Azam and here i am new to this discussion forum.
we are in situation that use diffrent variant for configurable material in sales order related production,
I would like to have some information about use product cost collector for this kind of sales order related production,
also I want to know difference between prelimanary cost estimate or cost estimate for sales order?
Please co-operate me.
I would be highly appriciated if you can respond at the earliest.
Thanks
Azam

Hi,
Here, for each sales order item, you will have sales order cost estimate. This enables the system to compute the variances once the actual costs are booked against the production.
In the case of preliminery cost, we get the preliminery cost for production order as a plan cost and is not being used for the computation of variance but only for comparision purpose which is very marginally used.
Trust this helps much and do encourage our efforts!
Cheers!

How to maintain One product cost collector for multiple materials and configuration setting

Hi experts,
my requirement is that i want to maintain one product cost collector for multiple materials ans also i want to know the configuration setting for the same.
I have used KKF6N but it is not working in my case. I went through KKF6M also but there i found multiple cost collectors.
please guide me in the same.
Thanks in advance.

Hi Shripad,
you cannot assign same Product cost collector to different material.
Because you creating cost collector for material combination of material /production version,material /Bom Routing.
so please create individual cost collector for every material.
if you have any query kindly revert back.
Please mark the answer as helpful if it is helpful to you.
Because march 5 onwards scn has stopped awarding points to liked content.
Starting now: No more points for likes on comments/replies
Thanks & Regards
Sandeep Kumar Praharaj

Cost Collector for REM

Dear All,
can anybody explain me the total configuration for cost collector.
only i tell u which i have done yet.
i have made a rem profile and assigned it to a fert.
now please explain me what should i do to run Repetititve manufacturing.

Dear Shoaib,
1.The default order type for creating product cost collector for the REM related materials will be RM01.
2.For creating the product cost collector generally a production version or else (BOM and routing) is required.
3.Product cost collectors can be created using KKF6N and using the same T code pre.costing can also be made.
4.For a multiple list of materials the product cost collectors can be made using KKF6M.
5.Preliminary costing may be made using MF30.
For making prod.confirmation through MFBF,you need a product cost collector as this the cost collecting object in REM.
Now come back with your further queries.
Regards
Mangalraj.S

Error reading material cost estimate for sales order (KE292)

Dear All,
I have an issue with billing. we are posting july month transactions, the material cost is maintained through MR21. When releasing billing document for accounting we are getting error message like"Error reading the material cost estimate for sales order "11"
Message no. KE292
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate item 000010 of sales order 11 by reading the corresponding product cost estimate.
However, no product cost estimate could be found for this sales order item.
The system accessed product costing for product AMLFP011011XX00P using costing key YB3 as defined in the
CO-PA Customizing settings.
System Response
The system cannot process the document any further.
Procedure
Check your Customizing settings."
We cross checked with other client as a current date and we ran cost estimate through CK40N with same material. and we posted entries. Here it is working fine. but in above process it is not working. Can you pls guide me where i missed.
Regards,
Nagaraju,

Hi,
When the Costing Key is assigned to the material types in the COPA customizing, then system expects Cost estimation when billing is released to Accounts.
If you dont run cost estimation but update the material master through MR21, system will not accept as in the Costing key configuration you must have selected the Current Standard price field for the valuation.
Hence, try to run cost estimation and then do releasing.
Thanks & Regards
Ravi Kumar

No delivery costs exist for purchase order

Dear Friends,
While doing MIRO, i am getting an error message as mentioned below----
"No delivery costs exist for purchase order xxxxxxxxx"
Message no. M8014.
Kindly guide me in resolving the error.
Thanks & Regards,

hi
>"No delivery costs exist for purchase order xxxxxxxxx"
itself says that there is no delivery cost,
firstly check ur PO ,Did u entere the delivery cost conditions like for freight or octoi in the PO
or if u have entered the condition then check if it is not already invoiced
if u dont have delivery cost in po and wanna do IV for material then in miro
change the option of delivery cost to goods/service
(at right side of the po no field)
regards
kunal

Information costing data for maintenance orders

Hi everbody,
Can somebody throw some light on Costing Data for maintenance order for the following functions
1) Costing sheet
2) Costing Variants
3) valuation Varaints.
I would like to know how this setting will be used in the business form the PM point of view.
Thanks in Advance
DP

[SAP Help|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/a9/ab7654414111d182b10000e829fbfe/frameset.htm]

Cost estimate for sales order

Dear Friends,
In a make to stock scenario a finished good is sold from the depot and thereafter it is returned. After creating the credit memo for return, when the same is being released to accounting in VF02, the system throws an error message which reads 'Error reading the material cost estimate for sales order "12000373". and the document cannot be passed on to accounting. Although, we are able to release the sales invoice to accounting without any error. In the item condition tab for sales order the standard cost VPRS is updated as we enter the plant.
Strategy group for the material is 40-planning with final assembly. The concern over here is that why the system is asking for cost estimate at the level of sales return.
Please suggest why this error is coming and how the same can be released to accounting.
Regards

Hello Friend,
The problem is that Material you are using for that Cost Estimate is not done. So go to T.Code CK11 give the Costing Variant, Material & Plant and go on entar and entar. If everything is green in end then save it.
Then Go to T.code CK24 give the Company Code, material & Plant and then execute.
Click Back and click on Release Button and then execute.
Then try the Transaction you have got the error again.
Hope this helps.

How to split cost allocations for sales order lines?

Has anyone here solved a requirement to split the cost of goods sold from a service request debrief.
The scenario is -
1. A debrief of a service request is completed.
2. Material is issued and technical labor used and expenses incurred.
3. I am hearing that in Oracle Service, the material is only costed but not the technical labor and expenses.
4. No splitting can occur in any of the cases through standard Oracle?
5. We have gone down the path of creating sales order line types for each department (unique code combination) and then splitting the COGS in SLA.
6. This way, we have to create items for labor and expenses.
Is this the only semi-standard way.
Thanks for your thoughts in advance.

Hi
I have reverse the sales order settlement, PP order settlement to sales order and I have also done KB11N for transfering the cost to the new production order.
The only problem is I was unable to transfer labour hour confirmation as cost element used for this are not for transfering cost. If I will reverse the confirmation in PP order system will reverse material movement also which I don't want any more. Can you please tell me how to I reverse the Labour hours with out affecting goods movement?
Many thanks

BOM Cost Estimate for sales order items

Hi experts,
    Which data source could extract data created by CK51N (Order BOM Cost Estimate )? We need to get BOM Cost estimate (including input material and activity) for sales order items.
    The closest one is 0CO_PC_01, but it extracts itemizations for production order.
    It's urgent.Helpful answers would be awarded.Thanks.
Regards,
Aaron

Hi Henry,
   They even do not have Sales Order segment. How could I get cost estimate data based on sales order?
Regards,
Aaron

Cost collector for claim

Hi Experts
I am unable to create cost collecter for claim (internal order CL01)
I have ensured maintenance of configuration with respect to cost integration.
I did not find the place where the internal order type CL01 and claim type are assigned.
Please suggest if i missed any specific setting.
warm regards
ramSiva

You must implement a BADI inorder to create a cost collector....you can read the relevant information here
http://help.sap.com/saphelp_erp60_sp/helpdata/en/71/ab5af0e1740241acc2542c84b02f2d/content.htm

Cost Report for service order

Hi All,
How to take out a cost report for a service order? like my requirement is how the cost of a Service Order is hitting to which cost center and profit center and company code and posting of the concerned GL along with the activity type.for example i have a service order where some activity is there with various hours all togather 25 hrs, how this is costed and posted in whic cost center and GL and Porfit center along with the rate.
Thanks,
Prasad

Please, try transaction KOB1. You also should be able to drill-down to line items with a partner object view.

Tabale for Actual cost value for Process orders

Hi Friends
From which table can we retrive the actual values relates to process orderwise, like actual material consumption cost, activites cost, overhead cost and other costs.

Hi
You would find the actual for process orders in Table COEP with Object Number = OP*. Also Check if you would require COSS, COSP for Controlling Tables and to get the Object numbers you need to used AFPO with Order type of Process order PI01...
Regards,
Suraj

Costing Variant for refurbhsiment order

Hi,
I have settting up refurbishment order. will the costing variant would be different for ref.order from normal maintenance order?
Please advise!
Regards,
Meghana

Hi,
Costing variants contain control parameters for all aspects of costing.
The costing variant forms the link between the application and
Customizing, since cost estimates are created and saved with reference
to a costing variant.
The costing variant controls how costing is executed, such as:
o Whether the costing results are planned costs or actual costs
o Which prices are used to valuate materials, internal activities, and
external activities
o How overhead is calculated
A costing variant includes the following groups of settings:
o Costing type
o Valuation variant
o Number range assignment
to know more about Costing part , dicuss with your CO consultant,
try OIOF tocheck for the costing variant assigned to Refurbishment order type. Remember Refurbishment order will be settled to the Material itself not to the Cost Center
Regards
Prakash

Cost Calculation for Sales Order Collectively

Hi,
We need to recalculate sales Order cost. We can recalculate Sales order cost in SAP T Code VA02 for individual sales order. I am having approx 1000 sales order of which cost needs to be recalculated. Can any one help me How to recalculate Cost of these sales order Collectively.
Thanks in Advance,
Pawan Kumar

Hi,
I guess you should select B (carry new pricing). Although the system would try to reprice, in fact I guess that no pricing value would be change. If this doesn't fit your requirements then SD expert should answer your question (there are some ways you can control the pricing calculation, the ultimate way is some coding under REQUIREMENTS, but I would use it as last option).
Benni

Abolish product cost collector for production order

Similar Messages

Maybe you are looking for