ACH CTX PMW

Hi All,
I would appreciate if some one can give me their experience on ACH CTX to Wells Fargo... We are Payment Medium WorkBench
Does the bank accepts the SAP Provided USA ACH CTX Format...
If we need to make any changes to the file -1) Do we have to enhance the strcture and copy the fm's FI_PAYMEDIUM_ACH_30 into zFI_PAYMEDIUM_ACH_30 and implement them ..
What's the structure do we have to enance ?
or else do we have to create new Payment Medium Formats under PAYM Tree in T-code DMEE ?
Can anyone send me end to end process document or links...
I enhanced one at one client but that was long time agao.. I would appreciate if some one could give some documentation like end to end process
Thanks

ACH CTX should suffice all your requirements. Recently, we have implemented.
You do not need do any change in the Function Modules.
If you are using ACH IAT (International Payment), refer
1343600
In that case, yes, there is a need for development.

Similar Messages

  • NACHA ACH CTX

    Hi
    I need to configure ACH CTX format for the payables through PMW. I was going through NACHA format layout for CTX and found that the length provided for sender's routing number is only 8 digit. My client's house bank has a 9 digit routing number which very common in the US. How can we accommodate this? Has anyone come across this scenario? If yes, could you share your solution?
    Thanks
    Raj

    Hi,
    Please check below links :
    https://www.regaltek.com/docs/NACHA%20Format.pdf
    Nacha File Format
    Hope this solves your issue.
    Regards,
    Tejas

  • N1 Segment in ACH CTX Flat File Payment Run

    Hi All,
    I'm trying to create a flat file for ACH CTX using PMW  from payment run
    I copied the Standard FM's and modified them as per our needs
    My only question is it don't see some segment like N1 Segment
    I believe  it contains Payor Company, Payee Company and Payee Address -if i'm missing that means i have to add them or activate them or the info is missing in the transactional data(Since there is no info in transaction data its not displaying in the flat file and also is N1 Segment Mandotory segment or not )
    Thanks in advance

    Venki,
    Are you using DMEE ?
    K.Kiran.

  • ACH CTX - Addenda Record Type 7

    Hi,
    I am working on ACH CTX file for vendor payments through Wells Fargo bank. I need some help on the Addenda Record type 7. The format generated by standard SAP for this record type 7 is not acceptable by the bank. And they are not able to help us out much on what should be the format. All they say is that it should be in ANSI ASC X12 format (payment-related information) and refer NACHA format guidelines. Can anyone tell me what is this NACHA format and what data elements should be passed on in this record type. Is there a specific format I can follow?
    Thanks,
    Raj/

    Hi,
    did you solve this items. Any information would be helpful.
    thanks
    Regards
    PG

  • ACH CTX Errors??

    Hello everyone,
    I'm posting a sample CTX output from our SAP system. I look at it and it does not seem right to me. The problem I see is the "9's" at the bottom. I try to make multiple documents for the CTX but it still comes out the same. Does anyone have any suggestions. As per usual points will be given
    Also some historical info:
    FBZP Shows:
    Outgoing Payments
    Bank Transf
    Allowed for personal payments
    Doc Type: ZP
    Clearing Type: ZV
    Bank Details: Acct# Req
    Using: RFFOUs_T with Print DataSet - LIST1S
    All Crcy's allowed for now
    In Country:
    Payment Advice Set to "as many req"
    Always pyt. adv
    Min and Max amounts set
    SAMPLE FILE OUTPUT (CTX)? Does this look right to you?
    101 074908594 COCO1 08060908481094101COMPANY NAME FAKE COMPANY NAME US
    5200FAKE COMPANY NAME TRANSMISDIRECT DEPOSIT 1999999999CCD 080609 1074908590000001
    62204100012499999999 0015569600 ACH TEST VENDOR 0074908590000001
    820000000100041000120000000000000000155696001999999999 074908590000001
    9000001000001000000010004100012000000000000000015569600
    9999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999
    9999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999
    9999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999
    9999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999
    9999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999

    Hi,
    did you solve this items. Any information would be helpful.
    thanks
    Regards
    PG

  • ACH CCD PMW issue

    Hi All,
    We have generated ACH-CCD file using PMW. However, we are unable to get the company name in the 5-record. This is a required field. Any idea where can we maintain that filed so it gets populated in the file ?
    Thank you for your help!
    Maya

    Hi Maya,
    For ACH you need to perform couple of steps:
    1.     Assign “RFFOUS_T” program in FBZP under Payment Methods in Country Tab for ACH relevant payment method   (APXY).
    2.     Create ACH Variant in OBPM4
                   SPRO-- SAP Customizing impl Guide-- Financial Accounting ( New) -- Accounts Receivable and Accounts Payable-- Business                                    Transactions- - Outgoing Payments -- Automatic outgoing Payments-- Payment Media --Make settings for Payment Medium Formats from                  Payment Medium Workbench -- Create and Assign Selection Variant)
    3.     If you are looking for customize 7th Record then Implement USER Exit “RFFOX104”
                   And in F110 variant select Additional record check box.
    4.     Assign company number in house bank configuration.
    If you don't want 7th customize record then you can use CCD and PPD payment method  format, instead of RFFOUS_T program in FBZP you need to Assign Format as ACH and Format Supplement as CCD and PPD.
    In this case you need to configure(SPRO--SAP Customizing impl Guide-- Financial Accounting ( New) -- Accounts Receivable and Accounts Payable-- Business Transactions-- Outgoing Payments -- Automatic outgoing Payments-- Payment Media --Make settings for Payment Medium Formats from Payment Medium Workbench -- Create and Assign Selection Variant) OBPM1, OBPM2, OBPM3 and OBPM4. No Need to change any configuration in OBPM1, OBPM2, OBPM3, just need to assign ACH Batch Header and company identification as company number(Whatever you assigned in House bank configuration)
    Create and Assign APP(F110) Variant under Program “RFFOAVIS_FPAYM”
        System will create automatically Header record, batch header,detail record,batch control record,header control record.
         Thanks & Regards
          RK

  • Addenda Record ACH CTX

    Hi All,
    I have copied the ZFI_PAYMEDIUM_ACH_00,ZFI_PAYMEDIUM_ACH_05,ZFI_PAYMEDIUM_ACH_20,ZFI_PAYMEDIUM_ACH_30 and replaced the standard FM's
    My question is regarding Addenda Record Segments
    For Ex: GS Segment
    FORM CONSTRUCT_ADDN_BEGIN TABLES  T_PAYMENT_DETAILS STRUCTURE FPM_PAYD
                             CHANGING  CN_LINE_CNT       TYPE N.
       CLEAR T_PAYMENT_DETAILS.
       T_PAYMENT_DETAILS-LENGTH = 80.
       T_PAYMENT_DETAILS-TYPE   = '1'.
       T_PAYMENT_DETAILS-LINE   = CN_LINE_CNT.
       WRITE: 'ISA' TO T_PAYMENT_DETAILS-TEXT(3),
              '*'   TO T_PAYMENT_DETAILS-TEXT+3(1),
              '00'  TO T_PAYMENT_DETAILS-TEXT+4(2),
              '*'   TO T_PAYMENT_DETAILS-TEXT+6(1),
              'NV'  TO T_PAYMENT_DETAILS-TEXT+7(10),
              '*'   TO T_PAYMENT_DETAILS-TEXT+17(1),
              '00'  TO T_PAYMENT_DETAILS-TEXT+18(2),
              '*'   TO T_PAYMENT_DETAILS-TEXT+20(1),
              'NV'  TO T_PAYMENT_DETAILS-TEXT+21(10),
              '*'   TO T_PAYMENT_DETAILS-TEXT+31(1),
              'ZZ'  TO T_PAYMENT_DETAILS-TEXT+32(2),
              '*'   TO T_PAYMENT_DETAILS-TEXT+34(1),
              'NV'  TO T_PAYMENT_DETAILS-TEXT+35(15),
              '*'   TO T_PAYMENT_DETAILS-TEXT+50(1),
              'ZZ'  TO T_PAYMENT_DETAILS-TEXT+51(2),
              '*'   TO T_PAYMENT_DETAILS-TEXT+53(1),
              'NV'  TO T_PAYMENT_DETAILS-TEXT+54(15),
              '*'   TO T_PAYMENT_DETAILS-TEXT+69(1),
              SY-DATLO TO T_PAYMENT_DETAILS-TEXT+70(6) YYMMDD,
              '*'   TO T_PAYMENT_DETAILS-TEXT+76(1),
                SY-TIMLO(3) TO T_PAYMENT_DETAILS-TEXT+77(3).
       APPEND T_PAYMENT_DETAILS.
       ADD 1 TO CN_LINE_CNT.
    * second addenda record
       CLEAR T_PAYMENT_DETAILS.
       T_PAYMENT_DETAILS-LENGTH = 75.
       T_PAYMENT_DETAILS-TYPE   = '1'.
       T_PAYMENT_DETAILS-LINE   = CN_LINE_CNT.
       WRITE: SY-TIMLO+3(1) TO T_PAYMENT_DETAILS-TEXT(1),
              '*'   TO T_PAYMENT_DETAILS-TEXT+1(1),
              '&'   TO T_PAYMENT_DETAILS-TEXT+2(1),     "repetition seperator
              '*'   TO T_PAYMENT_DETAILS-TEXT+3(1),
              '00400' TO T_PAYMENT_DETAILS-TEXT+4(5),   "version 004000
              '*'   TO T_PAYMENT_DETAILS-TEXT+9(1),
              '000000000' TO T_PAYMENT_DETAILS-TEXT+10(9),
              '*'   TO T_PAYMENT_DETAILS-TEXT+19(1),
              '0'   TO T_PAYMENT_DETAILS-TEXT+20(1),
              '*'   TO T_PAYMENT_DETAILS-TEXT+21(1),
              'P'   TO T_PAYMENT_DETAILS-TEXT+22(1),
              '*'   TO T_PAYMENT_DETAILS-TEXT+23(1),
              '?'   TO T_PAYMENT_DETAILS-TEXT+24(1),
              '\'   TO T_PAYMENT_DETAILS-TEXT+25(1),
              'GS'  TO T_PAYMENT_DETAILS-TEXT+26(2),
              '*'   TO T_PAYMENT_DETAILS-TEXT+28(1),
              'RA'  TO T_PAYMENT_DETAILS-TEXT+29(2),
              '*'   TO T_PAYMENT_DETAILS-TEXT+31(1),
              'NV'  TO T_PAYMENT_DETAILS-TEXT+32(2),  " I want to pass constant like '123456789' here and also at other places
              '*'   TO T_PAYMENT_DETAILS-TEXT+34(1),
              'NV'  TO T_PAYMENT_DETAILS-TEXT+35(2),
              '*'   TO T_PAYMENT_DETAILS-TEXT+37(1).
       MOVE SY-DATLO TO T_PAYMENT_DETAILS-TEXT+38(8).
       WRITE:
             '*'   TO T_PAYMENT_DETAILS-TEXT+46(1),
             SY-TIMLO(4) TO T_PAYMENT_DETAILS-TEXT+47,
             '*'   TO T_PAYMENT_DETAILS-TEXT+51(1),
             '0'   TO T_PAYMENT_DETAILS-TEXT+52(1),
             '*'   TO T_PAYMENT_DETAILS-TEXT+53(1),
             'X'   TO T_PAYMENT_DETAILS-TEXT+54(1),
             '*'   TO T_PAYMENT_DETAILS-TEXT+55(1),
             '004020' TO T_PAYMENT_DETAILS-TEXT+56(6),
             '\'   TO T_PAYMENT_DETAILS-TEXT+62(1),
             'ST'  TO T_PAYMENT_DETAILS-TEXT+63(2),
             '*'   TO T_PAYMENT_DETAILS-TEXT+65(1),
             '820' TO T_PAYMENT_DETAILS-TEXT+66(3),
             '*'   TO T_PAYMENT_DETAILS-TEXT+69(1),
             '0001' TO T_PAYMENT_DETAILS-TEXT+70(4),
             '\'   TO T_PAYMENT_DETAILS-TEXT+74(1).
       APPEND T_PAYMENT_DETAILS.
       ADD 1 TO CN_LINE_CNT.
    ENDFORM.                               " CONSTRUCT_ADDN_BEGIN
    Can someone tell me where and how to modify this ?
    Thanks

    Any Suggestions

  • ACH,Wires,Payment Medium Workbench

    Dear SAP dudes and ladies,
    I need to know how to use SAP's Payment Medium Workbench(PMW).How do you implement Payment Medium Workbench? How do you pay ACH CTX, PPD and MT103 (Wire)?
    Any help will be much appreciated, if anyone has material or screenshots please send it to [email protected]
    Thank you for your help.
    PJ

    Hi Ray,
    Check out the following link
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIBP/FI-AP-AP-PT.pdf
    Assign points if useful
    Regards
    Genie

  • Few data missing from CTX file, need source for CTX file

    Hi Experts,
    We are using ACH-CTX via Payment Medium Workbench (PMW) and not Via RFFOUS_T program.
    The CTX file is generating and now the issue here is few data is missing for some ADDENDA records. But for some ADDENDA lines the data is perfect. Could anyone help me out where exactly the mapping is done for generating CTX File and where the data is coming for this CTX file. As per technical consultant the Event 30- FM: FI_PAYMEDIUM_ACH_30 is appending the ADDENDA record. But where exactly the values are coming from for these FM or for the CTX File. Please revert ASAP.
    Thanks,
    Venkadesh

    Hi Experts,
    We are using ACH-CTX via Payment Medium Workbench (PMW) and not Via RFFOUS_T program.
    The CTX file is generating and now the issue here is few data is missing for some ADDENDA records. But for some ADDENDA lines the data is perfect. Could anyone help me out where exactly the mapping is done for generating CTX File and where the data is coming for this CTX file. As per technical consultant the Event 30- FM: FI_PAYMEDIUM_ACH_30 is appending the ADDENDA record. But where exactly the values are coming from for these FM or for the CTX File. Please revert ASAP.
    Thanks,
    Venkadesh

  • ACH Payments

    Dear FI Experts,
    We currently using F110 for checks, we now want to use it for ACH, I already configure FBDZ, I have house bank, I already enter the bank information into the vendor master.
    I used F110 to pay a test vendor via ACH, it appears that it created teh posting, but When I go to the check register to see the information fo rthe ACH it sys nothing found fo rthe payment method.
    What else do I need to do to sussesfully be able o send payment via ACH to teh bank, we already have a process in place for checks, and I thought they will appear on same report.
    Also does anyone know the difference between ACH (PPD) and ACH (CTX) in SAP?
    Your help will be greatly appreciated

    Frank
    Okay the job says:
    System reads house banks and checks if they are allowed
    House bank is selected ...
    No suitable bank can be selected for comp.code YMMC pmnt meth. T curr. USD
    No permitted payment method exists
    information re. vendor E992791 / paying company code YMMC ...
    .. payment not possible because of reported error
    May sure you have specified a House Bank in the vendor master record or line item.  You can do this but to simplify the problem by eliminating this possibility.
    Then if this is not the issue then your config in FBZP is where the error lies.  SAP is reading that configuration (especially the Bank Determination - Ranking Order) to determine whether payment method T can be used.   Ranking Order, Bank Acocunts, Available Amounts and Value Date all must be configured for payment method T and the house bank you are using for the EFTs.
    Also check your house bank configuration (check the g/l accounts assigned and currency).  Be sure that YMMC is the paying company code and the sending company code (assuming this is how you are setup).  Make sure the payment method T is assigned to the company code.
    Check your minimums for outgoing payments too but this would have appeared in the log.
    Check the payment method for company code config and make sure you are using the Classic Payment Medium Programs.
    If you have flagged Bank details required then make sure the vendor has bank details.  Again this would have  been logged but check anyway.
    Check permitted currency USD has been specified.

  • ACH Payment Notification

    We are currently making non-tax ACH (CTX) payments and are about to beging making tax payments via ACH (CCD+ TXP).  However, our Tax Dept. is hesitant because we can't provide them some kind of acknowledgement or proof that the payment was made and received by the taxing authority.  Apparently this is important in case of a  dispute because of penalties and interest imposed on late payments.  How have other companies approached this with ACH?  Alternatively, perhaps we should be making tax payments with a FEDwire which provides a tracking number (not sure if SAP can do these).  All thoughts are appreciated.  TIA.
    Jim

    Hi,
    Have you reviewed the payment method for wires to be sure the remit advice is mentioned there?

  • ACH File – entry detail record

    Hello experts
    While ACH CTX payment file implementation, I would like to understand how “transaction code “ is fed  field 2 position 2-3 in entry detail record (begin by 6). And is it possible to change it ?
    Thank you for your help

    Hi,
    Check Structure DTAMUSCTX and verify the field position to be changed.
    Check also
    ACH File user exit modification
    regards

  • ACH Remittance Advice Via Fax

    FI experts,
    We are able to configure ACH-CTX, we are able to pay vendors, cerate bank file, print payment advice. Now we are in teh process of automating payment advice to be send via FAX and E-mail. Does anyone knows the steps to configure for fax and e-mail

    Jason,
    Everything seems to be working great, with teh exception that i can't print, we have added BTE 00002050, 00002060m but still no success, can you guide me thru steps necessary?
    to print payment advices for those that will require to print them.
    Thank You,
    Frank

  • Payment methods for Wire transfers

    Hello,
    I want to decide which payment method to configure for wire transfer out of the standard SAP methods:
    D     Bank transfer (ACH CCD)
    P     Bank transfer (ACH PPD)
    T     Bank transfer (ACH CTX)
    What is the difference between each of these transfer types, if someone can pls suggest will appreciate that.

    Win:
    CCD:       
    Cash Concentration or Disbursement
    Cash Concentration or Disbursement can be either an ACH credit or debit where funds are transferred between corporate entities.
    The format can support a limited amount of payment related data with the funds transfer while also being capable of a stand-alone funds transfer.
    PPD:
    Prearranged Payment and Deposit Entry
    Direct Deposit - Direct Deposit is a credit program that transfers funds into a consumer's account at the Receiving Depository Financial Institution. The amount deposited can be from a variety of products, such as payroll, interest, pension, dividends, etc.
    Pre-Authorized Bill Payment - Preauthorized payment is a debit program enabling companies with billing operations to collect funds from consumers thorough the electronic transfer of bill payment entries.
    The consumer grants the originating company authorization to collect periodic charges to his or her account as bills come due. This concept has been successful in both recurring bills of regular amounts (mortgage payments) and variable amounts (utility bills).
    CTX:
    The Corporate Trade Exchange format supports transferring of funds, either credits or debits, within a trading partner relationship utilizing a full ANSI ASC X12 message or when payment related UN/EDIFACT information is sent with the funds transfer.
    Multiple addenda records contain the ANSI or UN/EDIFACT information.
    More info on
    http://www.treasurysoftware.com/ach_file_format.html
    http://en.wikipedia.org/wiki/Automated_Clearing_House
    Assign points if info helps
    Vj

  • F110 t code

    Hi guru's
    I am an abaper
    I am working in FI module its very new for me.
    When I am runing F110 T code, payment run T code. IF the file format is ACH-CTX file format. The file will auotmatically save in /temp/ .directory (AL11)
    Please let me know what are T codes that come into picture if we run F110 t Code
    my client wants to save this file in seprate directory.
    Can u give any sugestion about any user exit or enhance ment spot.
    as the file format is ACH-CTX. my client need a logical file path which shd be created and save as variant in F110
    suggestion will be rewarded.
    Regards

    hi
    F110 is used for APP means Automatic Payment Programme u r not supposed to run the transaction that it is of FI consultant he look in to this matter.
    If u want to run the Transaction then u need to maintain the back details and  ranking orders and all the paramaters correctly then the run schedule and run date and next run date and the give a name for that programme and then u execute the programme after that check the log is it has been create properly r not. if it is done properly then u back to previous menu there u go to menu bar owns pool request undet system u find the check printing there.
    if it is ok then remove the test run and execute.
    Subbu

Maybe you are looking for